The effect of temperature and other factors on plastics and elastomers
- Laurence W. McKeen.
- Third edition.
- Waltham, MA : William Andrew Publishing, 2014.
- Physical description
- 1 online resource.
- PDL handbook series.
- Mckeen, Laurence W.
- Includes bibliographical references and index.
- Front Cover; The Effect of Temperature and Other Factors on Plastics and Elastomers; Copyright Page; Contents; Preface; 1 Introduction to Plastics, Polymers, and Their Properties; 1.1 Polymer/Plastic Chemistry; 1.1.1 Polymerization; 126.96.36.199 Addition Polymerization; 188.8.131.52 Condensation Polymerization; 1.1.2 Copolymers; 1.1.3 Linear, Branched, and Cross-linked Polymers; 1.1.4 Polarity; 1.1.5 Unsaturation; 1.1.6 Steric Hindrance; 1.1.7 Isomers; 184.108.40.206 Structural Isomers; 220.127.116.11 Geometric Isomers; 18.104.22.168 Stereoisomers-Atactic, Isotactic, and Syndiotactic.
- 1.1.8 Inter- and Intramolecular Attractions in Polymers22.214.171.124 Hydrogen Bonding; 126.96.36.199 Van der Waals Forces; 188.8.131.52 Chain Entanglement; 1.1.9 General Classifications; 184.108.40.206 Molecular Weight; 220.127.116.11 Thermosets vs. Thermoplastics; 18.104.22.168 Crystalline vs. Amorphous; 1.2 Plastic Compositions; 1.2.1 Fillers, Reinforcement, Composites; 1.2.2 Combustion Modifiers, Fire, Flame Retardants, and Smoke Suppressants; 1.2.3 Release Agents; 1.2.4 Slip Additives/Internal Lubricants; 1.2.5 Antiblock Additives; 1.2.6 Catalysts; 1.2.7 Impact Modifiers and Tougheners; 1.2.8 UV/Radiation Stabilizers.
- 1.2.9 Optical Brighteners1.2.10 Plasticizers; 1.2.11 Pigments, Extenders, Dyes, and Mica; 22.214.171.124 Titanium Dioxide; 126.96.36.199 Carbon Black; 1.2.12 Coupling Agents; 1.2.13 Thermal Stabilizers; 1.2.14 Antistats; 1.3 Testing of Plastics; 1.3.1 Mechanical Property Testing of Plastics; 188.8.131.52 Tensile Properties; 184.108.40.206 Compressive Properties; 220.127.116.11 Shear Properties; 18.104.22.168 Flexural Properties; 22.214.171.124 Impact Property Testing of Plastics; Izod Impact Strength and Charpy Impact Strength; Gardner and Falling Dart Impact Strength; 1.3.2 Thermal Property Testing of Plastics.
- 126.96.36.199 Heat Deflection Temperature188.8.131.52 Vicat Softening Temperature; 184.108.40.206 Melt Flow Index; 220.127.116.11 Glass Transition Temperature (Tg); Mechanical Methods of Estimating Tg; Thermal Methods of Estimating Tg; Volume Methods of Determining Tg; Electrical Methods of Determining Tg; 18.104.22.168 Melting Point (Tm); 22.214.171.124 Coefficient of Thermal Expansion; 1.4 Principles of Plastic Product Design; 1.4.1 Rigidity of Plastic Materials; 1.4.2 The Assessment of Maximum Service Temperature; 1.4.3 Assessment of Thermal Stability; 1.4.4 Toughness; 1.4.5 The Assessment of Impact Strength.
- 1.4.6 Time-Dependent Behavior1.4.7 Selection Guides; 1.5 Summary; References; 2 Styrenic Plastics; 2.1 Acrylonitrile Butadiene Styrene (ABS); 2.2 Methyl Methacrylate- Acrylonitrile-Butadiene-Styrene (MABS) Polymer; 2.3 Acrylonitrile Styrene Acrylate (ASA); 2.4 Polystyrene (PS); 2.5 Styrene Acrylonitrile (SAN); 2.6 Styrenic Butadiene Block Copolymers (SBC); 2.7 Styrene Maleic Anhydride (SMA); 2.8 Styrenic Blends and Alloys; References; 3 Polyether Plastics; 3.1 Acetals-Polyoxymethylene (POM or Acetal Homopolymer); 3.2 Polyoxymethylene Copolymer (POM-Co or Acetal Copolymer).
- Publisher's Summary
- This reference guide brings together a wide range of critical data on the effect of temperature on plastics and elastomers, enabling engineers to make optimal material choices and design decisions. The effects of humidity level and strain rate on mechanical and electrical properties are also covered. The data are supported by explanations of how to make use of the data in real world engineering contexts. High (and low) temperatures can have a significant impact on plastics processing and applications, particularly in industries such as automotive, aerospace, oil and gas, packaging, and medical devices, where metals are increasingly being replaced by plastics. Additional plastics have also been included for polyesters, polyamides and others where available, including polyolefins, elastomers and fluoropolymers. Entirely new sections on biodegradable polymers and thermosets have been added to the book. The level of data included - along with the large number of graphs and tables for easy comparison - saves readers the need to contact suppliers, and the selection guide has been fully updated, giving assistance on the questions which engineers should be asking when specifying materials for any given application. * Trustworthy, current thermal data and best practice guidance for engineers and materials scientists in the plastics industry* More than 1,000 graphs and tables allow for easy comparison between plastics* Entirely new sections added on biopolymers and thermosets.
(source: Nielsen Book Data)9780323310161 20160614
- Publication date
- PDL handbook series
- Includes index.
- Available in another form
- Print version: Mckeen, Laurence W. Effect of temperature and other factors on plastics and elastomers ( 0323310168 )