Give students a rigorous, complete, and integrated treatment of the mechanics of materials -- an essential subject in mechanical, civil, and structural engineering. This leading text, Goodno/Gere's MECHANICS OF MATERIALS, 9E, examines the analysis and design of structural members subjected to tension, compression, torsion, and bending -- laying the foundation for further study.
(source: Nielsen Book Data) 9781337093347 20170227

• 1. Stress Chapter Objectives 1.1 Introduction 1.2 Equilibrium of a Deformable Body 1.3 Stress 1.4 Average Normal Stress in an Axially Loaded Bar 1.5 Average Shear Stress 1.6 Allowable Stress Design 1.7 Limit State Design
• 2. Strain Chapter Objectives 2.1 Deformation 2.2 Strain
• 3. Mechanical Properties of Materials Chapter Objectives 3.1 The Tension and Compression Test 3.2 The Stress-Strain Diagram 3.3 Stress-Strain Behavior of Ductile and Brittle Materials 3.4 Strain Energy 3.5 Poisson's Ratio 3.6 The Shear Stress-Strain Diagram *3.7 Failure of Materials Due to Creep and Fatigue
• 4. Axial Load Chapter Objectives 4.1 Saint-Venant's Principle 4.2 Elastic Deformation of an Axially Loaded Member 4.3 Principle of Superposition 4.4 Statically Indeterminate Axially Loaded Members 4.5 The Force Method of Analysis for Axially Loaded Members 4.6 Thermal Stress 4.7 Stress Concentrations *4.8 Inelastic Axial Deformation *4.9 Residual Stress
• 5. Torsion Chapter Objectives 5.1 Torsional Deformation of a Circular Shaft 5.2 The Torsion Formula 5.3 Power Transmission 5.4 Angle of Twist 5.5 Statically Indeterminate Torque-Loaded Members *5.6 Solid Noncircular Shafts *5.7 Thin-Walled Tubes Having Closed Cross Sections 5.8 Stress Concentration *5.9 Inelastic Torsion *5.10 Residual Stress
• 6. Bending Chapter Objectives 6.1 Shear and Moment Diagrams 6.2 Graphical Method for Constructing Shear and Moment Diagrams 6.3 Bending Deformation of a Straight Member 6.4 The Flexure Formula 6.5 Unsymmetric Bending *6.6 Composite Beams *6.7 Reinforced Concrete Beams *6.8 Curved Beams 6.9 Stress Concentrations *6.10 Inelastic Bending
• 7. Transverse Shear Chapter Objectives 7.1 Shear in Straight Members 7.2 The Shear Formula 7.3 Shear Flow in Built-Up Members 7.4 Shear Flow in Thin-Walled Members *7.5 Shear Center for Open Thin-Walled Members
• 8. Combined Loadings Chapter Objectives 8.1 Thin-Walled Pressure Vessels 8.2 State of Stress Caused by Combined Loadings
• 9. Stress Transformation Chapter Objectives 9.1 Plane-Stress Transformation 9.2 General Equations of Plane-Stress Transformation 9.3 Principal Stresses and Maximum In-Plane Shear Stress 9.4 Mohr's Circle-Plane Stress 9.5 Absolute Maximum Shear Stress
• 10. Strain Transformation Chapter Objectives 10.1 Plane Strain 10.2 General Equations of Plane-Strain Transformation *10.3 Mohr's Circle-Plane Strain *10.4 Absolute Maximum Shear Strain 10.5 Strain Rosettes 10.6 Material Property Relationships *10.7 Theories of Failure
• 11. Design of Beams and Shafts Chapter Objectives 11.1 Basis for Beam Design 11.2 Prismatic Beam Design *11.3 Fully Stressed Beams *11.4 Shaft Design
• 12. Deflection of Beams and Shafts Chapter Objectives 12.1 The Elastic Curve 12.2 Slope and Displacement by Integration *12.3 Discontinuity Functions *12.4 Slope and Displacement by the Moment-Area Method 12.5 Method of Superposition 12.6 Statically Indeterminate Beams and Shafts 12.7 Statically Indeterminate Beams and Shafts-Method of Integration *12.8 Statically Indeterminate Beams and Shafts-Moment-Area Method 12.9 Statically Indeterminate Beams and Shafts-Method of Superposition
• 13. Buckling of Columns Chapter Objectives 13.1 Critical Load 13.2 Ideal Column with Pin Supports 13.3 Columns Having Various Types of Supports *13.4 The Secant Formula *13.5 Inelastic Buckling *13.6 Design of Columns for Concentric Loading *13.7 Design of Columns for Eccentric Loading
• 14. Energy Methods Chapter Objectives 14.1 External Work and Strain Energy 14.2 Elastic Strain Energy for Various Types of Loading 14.3 Conservation of Energy 14.4 Impact Loading *14.5 Principle of Virtual Work *14.6 Method of Virtual Forces Applied to Trusses *14.7 Method of Virtual Forces Applied to Beams *14.8 Castigliano's Theorem *14.9 Castigliano's Theorem Applied to Trusses *14.10 Castigliano's Theorem Applied to Beams
• Appendix A Geometric Properties of an Area B Geometric Properties of Structural Shapes C Slopes and Deflections of Beams
• Solutions and Answers for Preliminary Problems Fundamental Problems Partial Solutions and Answers Selected Answers Index
• Sections of the book that contain more advanced material are indicated by a star (*).
• (source: Nielsen Book Data)

For undergraduate Mechanics of Materials courses in Mechanical, Civil, and Aerospace Engineering departments. Thorough coverage, a highly visual presentation, and increased problem solving from an author you trust. Mechanics of Materials clearly and thoroughly presents the theory and supports the application of essential mechanics of materials principles. Professor Hibbeler's concise writing style, countless examples, and stunning four-color photorealistic art program - all shaped by the comments and suggestions of hundreds of reviewers - help readers visualize and master difficult concepts. The Tenth Edition retains the hallmark features synonymous with the Hibbeler franchise, but has been enhanced with the most current information, a fresh new layout, added problem solving, and increased flexibility in the way topics are covered. Also available with MasteringEngineering(TM). This title is also available with MasteringEngineering, an online homework, tutorial, and assessment program designed to work with this text to engage students and improve results. Interactive, self-paced tutorials provide individualized coaching to help students stay on track. With a wide range of activities available, students can actively learn, understand, and retain even the most difficult concepts. The text and MasteringEngineering work together to guide students through engineering concepts with a multi-step approach to problems. Note: You are purchasing a standalone product; MyLab(TM) & Mastering(TM) does not come packaged with this content. Students, if interested in purchasing this title with MyLab & Mastering, ask your instructor for the correct package ISBN and Course ID. Instructors, contact your Pearson representative for more information. If you would like to purchase both the physical text and MyLab & Mastering, search for: 0134518128 / 9780134518121 Mechanics of Materials Plus MasteringEngineering with Pearson eText -- Access Card Package, 10/e Package consists of: *0134319656 / 9780134319650 Mechanics of Materials, 10/e *0134321286 / 9780134321288 MasteringEngineering with Pearson eText--Standalone Access Card--for Mechanics of Materials.
(source: Nielsen Book Data) 9780134319650 20171002

• 1 Stress
• 3 Chapter Objectives
• 3 1.1 Introduction
• 3 1.2 Equilibrium of a Deformable Body
• 4 1.3 Stress
• 22 1.4 Average Normal Stress in an Axially Loaded Bar
• 24 1.5 Average Shear Stress
• 32 1.6 Allowable Stress Design
• 46 1.7 Limit State Design
• 48
• 2 Strain
• 67 Chapter Objectives
• 67 2.1 Deformation
• 67 2.2 Strain
• 68
• 3 Mechanical Properties of Materials
• 83 Chapter Objectives
• 83 3.1 The Tension and Compression Test
• 83 3.2 The Stress-Strain Diagram
• 85 3.3 Stress-Strain Behavior of Ductile and Brittle Materials
• 89 3.4 Hooke's Law
• 92 3.5 Strain Energy
• 94 3.6 Poisson's Ratio
• 104 3.7 The Shear Stress-Strain Diagram
• 106 *3.8 Failure of Materials Due to Creep and Fatigue
• 109
• 4 Axial Load
• 121 Chapter Objectives
• 121 4.1 Saint-Venant's Principle
• 121 4.2 Elastic Deformation of an Axially Loaded Member
• 124 4.3 Principle of Superposition
• 138 4.4 Statically Indeterminate Axially Loaded Member
• 139 4.5 The Force Method of Analysis for Axially Loaded Members
• 145 4.6 Thermal Stress
• 153 4.7 Stress Concentrations
• 160 *4.8 Inelastic Axial Deformation
• 164 *4.9 Residual Stress
• 166
• 5 Torsion
• 181 Chapter Objectives
• 181 5.1 Torsional Deformation of a Circular Shaft
• 181 5.2 The Torsion Formula
• 184 5.3 Power Transmission
• 192 5.4 Angle of Twist
• 204 5.5 Statically Indeterminate Torque-Loaded Members
• 218 *5.6 Solid Noncircular Shafts
• 225 *5.7 Thin-Walled Tubes Having Closed Cross Sections
• 228 5.8 Stress Concentration
• 238 *5.9 Inelastic Torsion
• 241 *5.10 Residual Stress
• 243
• 6 Bending
• 259 Chapter Objectives
• 259 6.1 Shear and Moment Diagrams
• 259 6.2 Graphical Method for Constructing Shear and Moment Diagrams
• 266 6.3 Bending Deformation of a Straight Member
• 285 6.4 The Flexure Formula
• 289 6.5 Unsymmetric Bending
• 306 *6.6 Composite Beams
• 316 *6.7 Reinforced Concrete Beams
• 319 *6.8 Curved Beams
• 323 6.9 Stress Concentrations
• 330 *6.10 Inelastic Bending
• 339
• 7 Transverse Shear
• 363 Chapter Objectives
• 363 7.1 Shear in Straight Members
• 363 7.2 The Shear Formula
• 365 7.3 Shear Flow in Built-Up Members
• 382 7.4 Shear Flow in Thin-Walled Members
• 391 *7.5 Shear Center for Open Thin-Walled Members
• 396
• 8 Combined Loadings
• 409 Chapter Objectives
• 409 8.1 Thin-Walled Pressure Vessels
• 409 8.2 State of Stress Caused by Combined Loadings
• 416
• 9 Stress Transformation
• 441 Chapter Objectives
• 441 9.1 Plane-Stress Transformation
• 441 9.2 General Equations of Plane-Stress Transformation
• 446 9.3 Principal Stresses and Maximum In-Plane Shear Stress
• 449 9.4 Mohr's Circle-Plane Stress
• 465 9.5 Absolute Maximum Shear Stress
• 477
• 10 Strain Transformation
• 489 Chapter Objectives
• 489 10.1 Plane Strain
• 489 10.2 General Equations of Plane-Strain Transformation
• 490 *10.3 Mohr's Circle-Plane Strain
• 498 *10.4 Absolute Maximum Shear Strain
• 506 10.5 Strain Rosettes
• 508 10.6 Material-Property Relationships
• 512 *10.7 Theories of Failure
• 524
• 11 Design of Beams and Shafts
• 541 Chapter Objectives
• 541 11.1 Basis for Beam Design
• 541 11.2 Prismatic Beam Design
• 544 *11.3 Fully Stressed Beams
• 558 *11.4 Shaft Design
• 562
• 12 Deflection of Beams and Shafts
• 573 Chapter Objectives
• 573 12.1 The Elastic Curve
• 573 12.2 Slope and Displacement by Integration
• 577 *12.3 Discontinuity Functions
• 597 *12.4 Slope and Displacement by the Moment-Area Method
• 608 12.5 Method of Superposition
• 623 12.6 Statically Indeterminate Beams and Shafts
• 631 12.7 Statically Indeterminate Beams and Shafts-Method of Integration
• 632 *12.8 Statically Indeterminate Beams and Shafts-Moment-Area Method
• 637 12.9 Statically Indeterminate Beams and Shafts-Method of Superposition
• 643
• 13 Buckling of Columns
• 661 Chapter Objectives
• 661 13.1 Critical Load
• 661 13.2 Ideal Column with Pin Supports
• 664 13.3 Columns Having Various Types of Supports
• 670 *13.4 The Secant Formula
• 682 *13.5 Inelastic Buckling
• 688 *13.6 Design of Columns for Concentric Loading
• 696 *13.7 Design of Columns for Eccentric Loading
• 707
• 14 Energy Methods
• 719 Chapter Objectives
• 719 14.1 External Work and Strain Energy
• 719 14.2 Elastic Strain Energy for Various Types of Loading
• 724 14.3 Conservation of Energy
• 737 14.4 Impact Loading
• 744 *14.5 Principle of Virtual Work
• 755 *14.6 Method of Virtual Forces Applied to Trusses
• 759 *14.7 Method of Virtual Forces Applied to Beams
• 766 *14.8 Castigliano's Theorem
• 775 *14.9 Castigliano's Theorem Applied to Trusses
• 777 *14.10 Castigliano's Theorem Applied to Beams
• 780 Appendix A. Geometric Properties of an Area B. Geometric Properties of Structural Shapes C. Slopes and Deflections of Beams Fundamental Problems Partial Solutions and Answers Answers for Selected Problems Index (*) Sections of the book that contain more advanced material are indicated by a star. Time permitting, some of these topics may be included in the course. Furthermore, this material provides a suitable reference for basic principles when it is covered in other courses, and it can be used as a basis for assigning special projects.
• (source: Nielsen Book Data)

For undergraduate Mechanics of Materials courses in Mechanical, Civil, and Aerospace Engineering departments. Containing Hibbeler's hallmark student-oriented features, this text is in four-color with a photorealistic art program designed to help students visualize difficult concepts. A clear, concise writing style and more examples than any other text further contribute to students' ability to master the material. This edition is available with MasteringEngineering, an innovative online program created to emulate the instructor's office-hour environment, guiding students through engineering concepts from Mechanics of Materials with self-paced individualized coaching. Note: If you are purchasing the standalone text or electronic version, MasteringEngineering does not come automatically packaged with the text. To purchase MasteringEngineering, please visit: masteringengineering.com or you can purchase a package of the physical text + MasteringEngineering by searching the Pearson Higher Education website. Mastering is not a self-paced technology and should only be purchased when required by an instructor.
(source: Nielsen Book Data) 9780133254426 20160615

The Eighth Edition of MECHANICS OF MATERIALS continues its tradition as one of the leading texts on the market. With its hallmark clarity and accuracy, this text develops student understanding along with analytical and problem-solving skills. The main topics include analysis and design of structural members subjected to tension, compression, torsion, bending, and more. The book includes more material than can be taught in a single course giving instructors the opportunity to select the topics they wish to cover while leaving any remaining material as a valuable student reference.
(source: Nielsen Book Data) 9781111577735 20160610

• Chapter 1: Introduction-Concept of Stress
• Chapter 2: Stress and Strain-Axial Loading
• Chapter 3: Torsion
• Chapter 4: Pure Bending
• Chapter 5: Analysis and Design of Beams for Bending
• Chapter 6: Shearing Stresses in Beams and Thin-Walled Members
• Chapter 7: Transformations of Stress and Strain
• Chapter 8: Principal Stresses Under a Given Loading
• Chapter 9: Deflection of Beams
• Chapter 10: Columns
• Chapter 11: Energy Methods.
• (source: Nielsen Book Data)

Beer and Johnston's "Mechanics of Materials" is the uncontested leader for the teaching of solid mechanics. Used by thousands of students around the globe since its publication in 1981, "Mechanics of Materials", provides a precise presentation of the subject illustrated with numerous engineering examples that students both understand and relate to theory and application. The tried and true methodology for presenting material gives your student the best opportunity to succeed in this course. From the detailed examples, to the homework problems, to the carefully developed solutions manual, you and your students can be confident the material is clearly explained and accurately represented. If you want the best book for your students, we feel Beer, Johnston's "Mechanics of Materials, 6th Edition" is your only choice.
(source: Nielsen Book Data) 9780073380285 20160602

• Chapter 1: Stress
• Chapter 2: Strain
• Chapter 3: Mechanical Properties of Materials
• Chapter 4: Design Concepts
• Chapter 5: Axial Deformation
• Chapter 6: Torsion
• Chapter 7: Equilibrium of Beams
• Chapter 8: Bending
• Chapter 9: Transverse Shear
• Chapter 10: Beam Deflections
• Chapter 11: Statically Indeterminate Beams
• Chapter 12: Stress Transformations
• Chapter 13: Strain Transformations
• Chapter 14: Pressure Vessels
• Chapter 15: Combined Loads
• Chapter 16: Columns Appendix A: Geometric Properties Appendix B: Geometric Properties of Structural Steel Shapes Appendix C: Table of Beam Slopes and Deflections.
• (source: Nielsen Book Data)

With this book, readers will now be able to easily visualize and understand mechanics phenomena while also gaining extensive practice in modeling and solving mechanics problems. It offers a three-part approach to explaining core concepts: in-text discussion, worked examples, and an online tutorial and animation provided by MecMovies. These animations have been proven to increase the reader's visualization skills, confidence level in solving problems, and interest in the material.
(source: Nielsen Book Data) 9780470044384 20160528

• 1 INTRODUCTION - CONCEPT OF STRESS
• 2 STRESS AND STRAIN - AXIAL LOADING
• 3 TORSION
• 4 PURE BENDING
• 5 ANALYSIS AND DESIGN OF BEAMS FOR BENDING
• 6 SHEARING STRESSES IN BEAMS AND THIN-WALLED MEMBERS
• 7 TRANSFORMATION OF STRESS AND STRAIN
• 8 PRINCIPAL STRESSES UNDER GIVEN LOADING CONDITIONS
• 9 DEFLECTION OF BEAMS
• 10 COLUMNS
• 11 ENERGY METHODS.
• (source: Nielsen Book Data)

For the past forty years Beer and Johnston have been the uncontested leaders in the teaching of undergraduate engineering mechanics. Their careful presentation of content, unmatched levels of accuracy, and attention to detail have made their texts the standard for excellence. The revision of their classic "Mechanics of Materials" features an updated art and photo program as well as numerous new and revised homework problems. The text's superior multimedia supplement package includes an extensive strength of materials Interactive Tutorial (created by George Staab and Brooks Breeden of The Ohio State University) that provides students with additional help on key concepts, as well as a custom website featuring animations, lecture powerpoints, and other online resources for both instructors and students.
(source: Nielsen Book Data) 9780072980905 20160527