articles+ search results

340,075 articles+ results

1 - 100
View results as:
Number of results to display per page
hide topic overview

Prototype.

A prototype is an early model of a product. A prototype is born from an idea for a product. It is typically built, tested, and redesigned as necessary until an acceptable final version is achieved. Once a prototype is considered final, the product...

Salem Press Encyclopedia, 2021. 2p.

1. Paper Prototyping : The Fast and Easy Way to Design and Refine User Interfaces [2003]

2. Towards Very Low-Cost Iterative Prototyping for Fully Printable Dexterous Soft Robotic Hands [2022]

3. Axure Prototyping Blueprints [2015]

4. Case study of a rapid prototyping method for optimizing soft gripper structures with integrated piezoresistive sensors [2022]

5. VLSI Architecture of Sigmoid Activation Function for Rapid Prototyping of Machine Learning Applications [2021]

6. Prototyping [2015]

7. AbstractSDRs: Bring Down the Two-Language Barrier With Julia Language for Efficient SDR Prototyping [2021]

8. Development of a Modular Reconfigurable Mold for Prototyping of Hollow Microneedles [2022]

9. Design Guidelines of Rapid Control Prototyping Systems for Power Electronics and Electrical Drives [2021]

10. Prototyping for a DDS-based I/Q reference signal generation on a capacitive sensing chip in 65nm CMOS using SystemC AMS, C HLS and VHDL [2021]

11. Application of Additive Technology for 3D Printing of Electronic Devices as a Way to Reduce Prototyping Time [2021]

12. Prototyping Practices in Software Startups: Initial Case Study Results [2021]

13. Half-Mode Waveguide Based on Gap Waveguide Technology for Rapid Prototyping [2022]

14. Virtual Prototyping Process For Assessment of Medium Voltage Grid-Connected Solid State Transformer Implementations [2021]

15. HIL Virtual Prototyping of a DC Shipboard Microgrid [2021]

16. Design Optimization and Prototyping of a Double-Rotor Axial-Flux Spoke-Type Ferrite-Magnet Micro-Wind Generator [2021]

17. A SystemC Model of the IEEE 802.11 EDCA Protocol for Virtual Prototyping [2021]

18. Prototyping Electronic Devices on a Dragonfly 3D Printer as a Means of Preserving Original Developments inside the Design Center [2021]

19. Extended Analysis of a Service Prototyping Experiment Conducted in Germany and France [2021]

20. Case-study for HW Accelerated FEA Model for Electrical Machine Control Prototyping [2021]

21. Design Variants Assessment Of Street LED Device Based On Virtual Prototyping [2021]

22. Prototyping : An Approach to Evolutionary System Development [2012]

23. Rapid Prototyping for a Future Aeronautical Mobile Communications System Using Software Defined Radio [2022]

24. Prototyping Opportunistic Learning in Resource Constrained Mobile Devices [2022]

25. Prototyping Distributed Botnet Detection System in Computer Networks [2022]

26. Designing WindCage- Unpacking the Thinking and Prototyping a Propeller-Based Haptic Unit [2022]

27. Packt_Publishing_3523OT_Balsamiq Prototyping_eBook [2012]

28. Modular Haptic Feedback for Rapid Prototyping of Tactile Displays [2021]

29. Rapid Development and Prototyping Environment for Testing of Unmanned Aerial Vehicles★ [2021]

30. Concept and Physical Prototyping of Micro Hydropower System Using Vertical Crossflow Turbine [2021]

31. Rapid Prototyping [2021]

32. Concept and Virtual Prototyping of Cooling Module for Photovoltaic System [2021]

33. Three Phase VSI Control System Rapid Prototyping with TI C2000 MCU and PLECS Coder [2021]

34. Numerical simulation of surface exposure rapid prototyping [2021]

35. Prototyping : A Practitioner's Guide [2011]

36. A Guide for RIS Fabrication for Quick Prototyping in Lab Settings Using Low Cost Fabrication Techniques [2021]

37. Piggy-back Network to enable Beyond5G Society supported by Autonomous Mobilities: Concept, Key technologies & Prototyping on a Service Robot Platform [2021]

38. SPROUT - Smart Power ROUting Tool for Board-Level Exploration and Prototyping [2021]

39. A Multiobjective Optimization of PCB Prototyping Assembly With OFA Based on the Similarity of Intuitionistic Fuzzy Sets [2021]

40. Compact Modeling of Reaction-Diffusion-Advection Mechanisms for the Virtual Prototyping of Lab-on-Chip [2021]

41. A Rapid Prototyping System, Intelligent Watchdog and Gateway Tool for Automotive Applications [2021]

42. Hardware-Software Co-Design of Sub-6 GHz Transceiver for Reconfigurable Prototyping [2022]

43. Proposal and prototyping on wildlife tracking system using infrared sensors [2022]

44. Analysis of GPU-Libraries for Rapid Prototyping Database Operations : A look into library support for database operations [2021]

45. Giraffe Neck Robot: First Step Toward a Powerful and Flexible Robot Prototyping Based on Giraffe Anatomy [2022]

46. Ultrafast Prototyping of Large-Area Stretchable Electronic Systems by Laser Ablation Technique for Controllable Robotic Arm Operations [2022]

47. The Urban CoCreation Lab—An Integrated Platform for Remote and Simultaneous Collaborative Urban Planning and Design through Web-Based Desktop 3D Modeling, Head-Mounted Virtual Reality and Mobile Augmented Reality: Prototyping a Minimum Viable Product and Developing Specifications for a Minimum Marketable Product [2022]

48. Fast Prototyping of Off-Stoichiometry Thiol-Ene (Oste) by Aqueous Replica Molding [2022]

49. User Experience Research on Product Design Evaluation based on Virtual Reality Prototyping [2020]

50. Automatic skull prototyping framework for damage detection and repairing using computer vision and deep learning techniques [2022]

51. Reuse in component-based prototyping: an industrial experience report from 15 years of reuse [2022]

52. A Modular Quantum Key Distribution Software Stack for Rapid Experimental Prototyping [2021]

53. Design and Development of Cost-effective PCB Prototyping Machine [2021]

54. Assessment to Enhance Air Force and Department of Defense Prototyping for the New Defense Strategy : A Workshop Summary [2013]

55. Xilinx System Generator-Based Rapid Prototyping of Solid-State Transformer for On-Grid Renewable Energy Integration [2021]

56. Prototyping process in education and science [2020]

57. Prototyping of Machine Learning at Traditional Market as Option for Sales and Purchasing Transaction [2020]

58. Low-Cost, Rapid Prototyping of a Microfluidic Biosensor Cartridge for On-Farm Diagnostics [2020]

59. Low Cost Rapid Control Prototyping – a useful method in Control Engineering Education [2020]

60. Agile Pathfinding Technology Prototyping: the Hunt for Directional Correctness [2020]

61. Virtual Prototyping of Open Source Heterogeneous Systems with an Open Source Framework Featuring SystemC MDVP Extensions [2020]

62. Characterization of Virtual Prototyping In ‘Refashion’ to Augment Circular Apparel Industry [2020]

63. Iterative Prototyping of Urban CoBuilder: Tracking Methods and User Interface of an Outdoor Mobile Augmented Reality Tool for Co‐Designing [2020]

64. RIS-Aided Wireless Communications: Prototyping, Adaptive Beamforming, and Indoor/Outdoor Field Trials [2021]

65. One-shot Radar-based Gesture Recognizer for Fast Prototyping [2021]

66. An FPGA Prototyping of the GIFT Cipher for Image Security Applications [2021]

67. Transmitarray Antenna Generating Circularly Polarized Orbital Angular Momentum (OAM) Beams: Synthesis, Prototyping and Measurements [2021]

68. Design, Control and Prototyping of a Bidirectional Dual Active Bridge Converter for integrating a Sodium Metal Halide Battery into a Telecom Station [2021]

69. UltraZohm—An Open-Source Rapid Control Prototyping Platform for Power Electronic Systems [2021]

70. Rapid prototyping of low-cost digital microfluidic devices using laser ablation [2020]

71. Authoring and Visualization Tool for Augmented Scenic Performances Prototyping and Experience [2020]

72. Virtual Prototyping of MV & HV Modular Multilevel Power Converter using evolutionary Optimization based on ρ & η [2020]

73. Analysis of Rapid Control Prototyping Performance for Power Conversion Applications [2020]

74. A Rapid Prototyping Approach in Industry4.0 based on Secure Hardware and Azure Sphere Cloud [2020]

75. Rapid Prototyping of Rotational Flux Modulating Magnetic Systems [2020]

76. A Lightweight Waterproof Casing for an Aquatic UAV using Rapid Prototyping [2020]

77. Rapid prototyping of a model-based fuel injection and ignition control systems [2020]

78. A Surgical Robotic System for Long-Bone Fracture Alignment: Prototyping and Cadaver Study [2022]

79. Proposing and Prototyping an Extension to the Adapter Concept in the IEC 61499 Standard [2022]

80. FikoRE: 5G and Beyond RAN Emulator for Application Level Experimentation and Prototyping [2022]

81. Beauty and the beast: A case study on performance prototyping of data-intensive containerized cloud applications [2022]

82. Computer vision methods for fragmented skull prototyping: Bio-CAD application [2020]

83. Printed Circuit Board Rapid Prototyping with Three-Dimensional Printer [2020]

84. Prototyping Autonomous Robotic Networks on Different Layers of RAMI 4.0 with Digital Twins [2020]

85. Modeling Techniques and Virtual Prototyping of Silicon Carbide MOSFET and IGBT Power Modules [2020]

86. An Automated Flow for Configuration and Generation of CNN based AI accelerators for HW Emulation & FPGA Prototyping [2021]

87. Prototyping a sensorized tool wristband for objective skill assessment and feedback during training in minimally invasive surgery [2021]

88. A Network-Enabled Myoelectric Platform for Prototyping Research Outside of the Lab [2021]

89. Rapid control prototyping for PMSM drives using DSPs and PLECS [2021]

90. Prototyping Multi-Protocol Communication to enable semantic interoperability for Demand response Services [2021]

91. CUPS Hijacking in Mobile RAN Slicing: Modeling, Prototyping, and Analysis [2021]

92. Prototyping of Smart Irrigation System Using IoT Technology [2021]

93. Immersive Experience Prototyping: Using Mixed Reality to Integrate Real Devices in Virtual Simulated Contexts to Prototype Experiences with Mobile Apps [2021]

94. Prototyping and Electromagnetic Analysis of a Biaxial-Pendulum Wave Energy Harvester [2021]

95. A Hardware Generator for Posit Arithmetic and its FPGA Prototyping [2021]

96. Direct Ink Writing as an Eco-Friendly PCB Manufacturing Technique for Rapid Prototyping [2021]

97. Prototyping Assistive Systems for Manual Assembly in Real Production Environments: Challenges and Lessons Learned [2021]

98. Towards Distributed Trajectory Interpolation and Motion Control: Prototyping with ROS [2021]

99. A Microwave Sensor With Operating Band Selection to Detect Rotation and Proximity in the Rapid Prototyping Industry [2021]

100. Rethink! Prototyping : Transdisciplinary Concepts of Prototyping [2016]

Catalog

Books, media, physical & digital resources
See catalog results

Guides

Course- and topic-based guides to collections, tools, and services.
Search ""Prototyping"" in all guide pages