Articles+ start "Prototyping"

articles+ search results

356,135 articles+ results

1 - 100
View results as:
Number of results to display per page
Topic overview
hide topic overview

Prototype.

A prototype is an early model of a product. A prototype is born from an idea for a product. It is typically built, tested, and redesigned as necessary until an acceptable final version is achieved. Once a prototype is considered final, the product...

Salem Press Encyclopedia, 2023. 2p.

1. Ultrasonic Degradation of Link-Functionalized Polymers for the Activation of Chemical Reactions [0000]

2. Systematic Computer Architecture Prototyping [0000]

3. Additive Fabrication and Soft -Lithographic Patterning of Microelectronic Devices [0000]

4. An Environment for Interactive Parallel Numerical Computing [0000]

5. Materials Processing Towards Development of Rapid Prototyping Technology for Manufacturing Biomedical Implants [0000]

6. Automatic parallelization of Prolog programs [0000]

7. Design and Development of a Portable Microfluidic System for Medical Diagnostics [0000]

8. ENCOMPASS: An Environment for Incremental Software Development Using Executable, Logic-Based Specifications [0000]

9. Multivariable Robust Control of Nonlinear Systems With Application to an Electro -Hydraulic Powertrain [0000]

10. Real-Time Hardware-in-the-Loop Emulation of Electric Machines for Electrified Transportation Systems [0018]

11. Rapid Prototyping Shortens Hydraulic Component Development Time [1110]

12. Environmental Impacts of Distributed Manufacturing from 3-D Printing of Polymer Components and Products [1255]

13. Formal and Programming Tools for Information System Design and Prototyping [1482]

14. IMECE2004-59580 Finite Element Analysis of Solidifying Processes in Rapid Freeze Prototyping [1745]

15. CEC designer: Domain specific modelling for the industrial automation based on the IEC 61499 standard [2008]

16. A Framework for Dependency Evaluation of the Agent Oriented Methodologies Work Flows [2009]

17. Innovations in GIS 4 [1900]

18. System Design and Prototyping for the CMS Level-1 Trigger at the High-Luminosity LHC [1900]

19. ラピッド・プロトタイピングシンポジウム = The Japan Rapid Prototyping Symposium [1900]

20. Advances in Additive Manufacturing Processes [1901]

21. Advances in Manufacturing, Production Management and Process Control : Proceedings of the AHFE 2021 Virtual Conferences on Human Aspects of Advanced Manufacturing, Advanced Production Management and Process Control, and Additive Manufacturing, Modeling Systems and 3D Prototyping, July 25-29, 2021, USA [1901]

22. Phaser III Game Prototyping [1901]

23. The 3D indoor deployment in DL-IoT with experimental validation using a particle swarm algorithm based on the dialects of songs [2018]

24. Fluid Flow Applications of Solid Freeform Fabrication: Valves in Single Build [2004]

25. Design prototyping methods: state of the art in strategies, techniques, and guidelines [2017]

26. Rubber with Holes. [1939]

27. PALEONTOLOGY: Fossils Made to Order, Any Size [2007]

28. Wireless ATM [1999]

29. Securing Wireless Communication via Hardware-Based Packet Obfuscation [2019]

30. CPA Methodology: educational technological design proposal to solve problems [2023]

31. Auto Suppliers Take the Bumps. [1954]

32. Automobil-Industrie [1956]

33. Design of an aircraft power-type circuit breaker for 600 F ambient [1958]

34. Design of an aircraft power-type circuit breaker for 600 F ambient [1958]

35. Print Reader MX2021 ( )/G IMR Analyzing Reader Model 8PT1. [1959]

36. Imaging requirements for medical applications of additive manufacturing [1961]

37. Experimentation, Prototyping, Intervention [1963]

38. Below Allergen research group [1963]

39. How Long Does It Take to Introduce New Products? [1965]

40. [Stereolithography as an additive technique in dentistry] [2003]

41. USE OF THE TIME-SHARING COMPUTER IN BUSINESS PLANNING AND BUDGETING. [1966]

42. Embedded Sensors for Biomimetic Robotics via Shape Deposition Manufacturing [2006]

43. Engineering Elements between First Year and Final Year Engineering Students in Malaysia [2012]

44. The Development of Direct Metallic Rapid Tooling System [2007]

45. PHASEPLOT: An On-Line Graphical Display Technique [1967]

46. PHASEPLOT: An On-Line Graphical Display Technique [1967]

47. 10G-Ethernet prototyping for 2-D X-Ray detectors at the XFEL [2009]

48. VLSI implementation of camera digital signal processor for document projection system [2010]

49. Towards an integrated development of control applications for multi-functional energy storages [2016]

50. Effect of direct aging and annealing on the microstructure and mechanical properties of AlSi10Mg fabricated by selective laser melting [2022]

51. A NEW PRODUCT ANALYSIS AND DECISION MODEL. [1968]

52. CRITIQUE OF: "A NEW PRODUCT ANALYSIS AND DECISION MODEL" [1968]

53. Inverse Model Based Testing -- Generating Behavior Models from Abstract Test Cases [2011]

54. The Early Diffusion of Color Television Receivers into a Fringe Area Market. [1968]

55. Product Planning at Perkins Engines Group. [1968]

56. THE INNOVATIVE FIRM. [1968]

57. This title is not available for guests. Log in to see the title and access the article.

58. Diagnostic software for SMARTNet-2 [1970]

59. Experimental Determination of Computed Tomography Settings for Jaw Scanning [1970]

60. Evaluation of a multiple-model failure detection system for the F-16 in a full-scale nonlinear simulation [1970]

61. Gathering requirements from remote users [1970]

62. HC-130H GPS upgrade: a case study incorporating digital avionics into the cockpit [1970]

63. Integrated Model Development Environment [1970]

64. Development of optimum preplanning for maxillofacial surgery using selective laser sintering [1970]

65. J-MASS and concurrent simulation in the laboratory environment [1970]

66. Two Navy Virtual World Collaboration Applications: Rapid Prototyping and Concept of Operations Experimentation [1970]

67. Danish history includes us. An example of collaborative partnership between citizens and museum [1970]

68. REE-a requirements engineering environment for analyzing and validating software and system requirements [1970]

69. Requirements engineering technologies at Rome Laboratory [1970]

70. UbiWorld: An environment integrating virtual reality, supercomputing, and design [1970]

71. The OAO Simulation System [1970]

72. The OAO Simulation System [1970]

73. USAF Prototype Study [1971]

74. An Innovation in Control Panels for Large Computer Control Systems [1971]

75. This title is not available for guests. Log in to see the title and access the article.

76. FAMECE and The Army's Concept of Prototype Validation [1971]

77. THREE PRICING POLICIES FOR A MULTI-PRODUCT MULTI-NATIONAL COMPANY. [1971]

78. An Innovation in Control Panels for Large Computer Control Systems [1971]

79. HOW TO COMPARE NEW PRODUCT PROGRAMS. [1971]

80. HOW OUR NEW R & D POLICY RELIES ON THE EXTENSIVE USE OF PROTOTYPES: HOW THE USSR IS HEADED TOWARD TECHNOLOGICAL SUPERIORITY. [1971]

81. Why prototyping is making a comeback. [1971]

82. Why prototyping is making a comeback. [1971]

83. THE ADVANCED PROTOTYPE APPROACH. [1971]

84. This title is not available for guests. Log in to see the title and access the article.

85. This title is not available for guests. Log in to see the title and access the article.

86. This title is not available for guests. Log in to see the title and access the article.

87. This title is not available for guests. Log in to see the title and access the article.

88. Clinical application of Premixed Gases [1972]

89. The Product as Change Agent: The Process of Development. [1972]

90. Choices for the Future: An Industry Viewpoint on Prototyping [1972]

91. Prototyping in Army Air Mobility [1972]

92. Impact Dynamics Analysis of Mobile Mechanical Systems [2021]

93. Strategies for Diversification. [1972]

94. Prototyping. [1972]

95. Electronic Control Board for Phased Antenna Array Research and Prototyping [2022]

96. Development Prototyping/Integrated Logistics Support (ILS). [1973]

97. The Central Control Room Man-Machine Interface at the Clinton P. Anderson Meson Physics Facility (LAMPF) [1973]

98. Twin-wire welding based additive manufacturing (TWAM): manufacture of functionally gradient objects [2017]

99. This title is not available for guests. Log in to see the title and access the article.

100. This title is not available for guests. Log in to see the title and access the article.

Catalog

Books, media, physical & digital resources
See catalog results

Guides

Course- and topic-based guides to collections, tools, and services.
Search ""Prototyping"" in all guide pages
1 - 100