articles+ search results

14,781 articles+ results

View results as:
Number of results to display per page

1. TRIZ-based method for developing a conceptual laparoscopic surgeon’s chair

2. A novel design strategy to enhance buckling resistance of thin-walled single-cell lattice structures via topology optimisation

3. Multifunctional and multimaterial contact lenses: tailored solutions for tunable color filtering and tear pH sensing

4. Modelling, optimization, and testing of novel cuboidal spherical plate lattice structures

5. Development of a novel gantry system for cooperative printing of plastic materials

6. Wire-arc directed energy deposition of monolithic and bimetallic structures of maraging 250 steel

7. 17-4 PH and SS316L bimetallic structures via additive manufacturing

8. Deposition dynamics and analysis of polyurethane foam structure boundaries for aerial additive manufacturing

9. Comparative analysis of structural build-up in one-component stiff and two-component shotcrete-accelerated set-on-demand mixtures for 3D concrete printing

10. Modeling and application of droplet oscillation momentum for elucidating the development of surface roughness in wire-arc additive manufacturing

11. Electron beam powder bed fusion enables crack-free, high-strength and sufficiently ductile chemically complex intermetallic alloys

12. Manipulating melt pool thermofluidic transport in directed energy deposition driven by a laser intensity spatial shaping strategy

13. Sub-microscale 3D printing based on cold-constrained local electrodeposition

14. Heterogeneous grain structure in biodegradable Zn prepared via mechanical alloying and laser powder bed fusion for strength-plasticity synergy

15. Effect of heat treatment and electroless Ni-P coating on mechanical property and corrosion behaviour of 316L stainless steel fabricated by laser powder bed fusion

16. Incorporating coarse aggregates into 3D concrete printing from mixture design and process control to structural behaviours and practical applications: a review

17. Effects of path patterns on residual stresses and deformations of directed energy deposition-arc built blocks

18. A non-probabilistic convex modelling framework for uncertainty quantification of laser powder bed fusion fabricated structures based on limited data

19. Enhancing the sensitivity of 3D printed sensors via ironing and void reduction

20. Interactive infill topology optimisation guided by user drawn patterns

21. Large-format additive manufacturing of polymers: a review of fabrication processes, materials, and design

22. Multi-objective optimisation of process parameters for laser-based directed energy deposition of a mixture of H13 and M2 steel powders on 4Cr5Mo2SiV1 steel

23. Microstructural evolution modelling and low-stress fatigue performance of bimodal-structured Al-Mg-Sc-Zr alloy produced by laser powder bed fusion additive manufacturing

24. Fatigue performance of metal additive manufacturing: a comprehensive overview

25. Revealing formation mechanism of end of process depression in laser powder bed fusion by multi-physics meso-scale simulation

26. Microstructure and mechanical properties of Al-Cu alloy during wire and arc additive manufacturing by adding micron TiB2 particles

27. Energy absorption and piezoresistive characteristics of 3D printed honeycomb composites with hybrid cell architecture

28. Additive manufacturing of self-sensing parts through material extrusion

29. Enhanced bone regeneration with bioprinted GelMA/Bentonite scaffolds inspired by bone matrix

30. Topology optimisation for vat photopolymerization 3D printing of ceramics with flushing jet accessibility constraint

31. Three-dimensional, soft magnetic-cored solenoids via multi-material extrusion

32. Internal topology optimisation of 3D printed concrete structures: a method for enhanced performance and material efficiency

33. LattSAC: a software for the acoustic modelling of lattice sound absorbers

34. Mapping 3D printed part density and filament flow characteristics in the material extrusion (MEX) process for filled and unfilled polymers

35. Frequency- and bandwidth-controllable electromagnetic absorber using 3D-printed shape memory meta-wires

36. Truss-plate hybrid lattice metamaterials with broadband vibration attenuation and enhanced energy absorption

37. A novel layer-based optimization method for stabilizing the early printing stage of LPBF process

38. Mechanical, materials, and physicochemical effects on the high-temperature tribological behaviour of laser additive manufacturing AlCoCrFeNi2.1 eutectic high-entropy alloys

39. Mechanical property enhancement in additively manufactured NiTi double-asymmetric honeycombs with bioinspired graded design

40. Non-contact microwave sensor for FDM 3D printing quality control

41. High-efficiency pentafluorostilbene-based photocatalysts dedicated to preparing fluorescent 3D printed polymer nanocomposites

42. Superaerophobic polymer objects prototyped via liquid crystal display (LCD)-based 3D printing: one-step post-surface-treatment and application in underwater bubble manipulation

43. Hygro-thermal coupling on 4D-printed biocomposites as key for meteosensitive shape-changing materials

44. Detection and quantitative evaluation of surface defects in wire and arc additive manufacturing based on 3D point cloud

45. Use of creep and recovery protocol to assess the printability of fibre-reinforced 3D printed white Portland cement composites

46. Grain refinement of NiTi alloys during ultrasound-assisted wire-arc directed energy deposition

47. 3D-printing of architected calcium silicate binders with enhanced and in-situ carbonation

48. Prediction of low-cycle fatigue properties of additive manufactured IN718 by crystal plasticity modelling incorporating effects from crystallographic orientations and defects

49. Effects of sacrificial coating material in laser shock peening of L-PBF printed AlSi10Mg

50. Mechanical properties enhancement of 3D-printed HA-PLA composites using ultrasonic vibration assistance

51. Development and experimental evaluation of surface enhancement methods for laser powder directed energy deposition microchannels

52. Co-continuous structure enhanced magnetic responsive shape memory PLLA/TPU blend fabricated by 4D printing

53. The role of controlled voids shape on the flexural properties of 3D printed food: an approach for tailoring their mechanical properties

54. Upgrading analytical models to predict the onset of degradation in selective laser sintering

55. Unlocking multiscale metallic metamaterials via lithography additive manufacturing

56. Integrated free-standing WS2 3D-printed carbon supercapacitor with solid state electrolyte

57. Intra-layer and inter-layer monitoring of laser powder bed fusion defects based on airborne acoustic and gn-Res model: pore and deformation

58. Inhomogeneity and anisotropy of Al-Zn-Mg-Cu alloy manufactured by wire arc additive manufacturing: microstructure, mechanical properties, stress corrosion cracking susceptibility

59. Modelling and researching the evolution of stress during arc-directed energy deposition (ADED) hybrid inter-layer hammering

60. A BIM-enabled robot control system for automated integration between rebar reinforcement and 3D concrete printing

61. A multi-materials 3D-printed continuous conductive fibre-based metamaterial for broadband microwave absorption

62. Effect of acetone treatment and copper oxide coating on the mechanical and wear properties of 3D-printed acrylonitrile butadiene styrene structures

63. Qualify-as-you-go: sensor fusion of optical and acoustic signatures with contrastive deep learning for multi-material composition monitoring in laser powder bed fusion process

64. The enhanced mechanical properties of laser powder bed fusion Al-Mn-Sc alloy via non-isothermal aging

65. Advancing the additive manufacturing of PLA-ZnO nanocomposites by fused filament fabrication

66. AM-SegNet for additive manufacturing in situ X-ray image segmentation and feature quantification

67. Microstructure, corrosion resistance and wear properties of laser directed energy deposited CrCoNi medium-entropy alloy after cyclic deep cryogenic treatment

68. Development of a novel powder sheets printing process towards the next generation of additive manufacturing: the role of laser defocusing

69. A novel model for directed energy deposition-arc based on in-order stacking of primitives

70. An integrated multiscale simulation guiding the processing optimisation for additively manufactured nickel-based superalloys

71. High-precision digital light processing (DLP) printing of microstructures for microfluidics applications based on a machine learning approach

72. A curved layering algorithm based on voxelization and geodesic distance for robotic GMA additive manufacturing

73. A ribbed strategy disrupts conventional metamaterial deformation mechanisms for superior energy absorption

74. Numerical modelling of the viscoelastic polymer melt flow in material extrusion additive manufacturing

75. Fabrication of functionalised graphene-PAEK nanocomposites for different manufacturing processes

76. A computationally efficient thermo-mechanical model with temporal acceleration for prediction of residual stresses and deformations in WAAM

77. Additively manufactured multi-functional metamaterials: low coefficient of thermal expansion and programmable Poisson’s ratio

78. Quantification of fracture mechanics with digital image correlation guides the infill design of 3D-printed snack bars with modulated flexural properties

79. Custom orthotic insoles with gradual variable stiffness using 3D printed spacer technique

80. Sc/Zr microalloying on strength-corrosion performance synergy of wire-arc directed energy deposited Al-Mg

81. Microstructure and property enhancement of 7075 aluminium alloy via laser metal deposition augmented by in-situ ultrasonic vibration

82. Accelerated improvement in tensile superelasticity of electron beam directed energy deposition manufactured NiTi alloys by artificial thermal cycling combined with low temperature aging treatment

83. Influence of scale effect on surface morphology in laser powder bed fusion technology

84. Microwave-assisted 3D printing of epoxy resin ink using rectangular waveguide

85. The influence of different ultrasonic impact treatment modes on microstructure and mechanical properties of 18Ni-300 steel fabricated by wire arc additive manufacturing

86. Optimising printing fidelity of the single-nozzle based multimaterial direct ink writing for 3D food printing

87. Direct wire writing technique benefitting the flexible electronics

88. Sound absorption performance of a micro-perforated plate sandwich structure based on selective laser melting

89. Strategies towards large-scale 3D printing without size constraints

90. Enhancing high-temperature performance of Inconel 718 LDED samples through hybrid laser polishing post-treatment

91. 3D-printed biodegradable polycaprolactone rib implants with tissue-specific mechanical properties promote chest wall recovery by stimulating tissue fibrosis

93. Biofunctionalized hydrogel composed of genipin-crosslinked gelatin/hyaluronic acid incorporated with lyophilized platelet-rich fibrin for segmental bone defect repair.

94. Rapid prototyping and facile customization of conductive hydrogel bioelectronics based on all laser process.

95. Assessing the stability of polyphenol content in red rooibos herbal tea using traditional methods and high-resolution mass spectrometry: Implications for studying dietary interventions in preclinical rodent studies.

96. Repeatability of Open-MOLLI: An open-source inversion recovery myocardial T1 mapping sequence for fast prototyping.

97. Multilevel sensor for monitoring external and internal environment of eggs

98. New Device for the Correction of Aphakia Without Capsular Support.

99. Post-treatment stability, survival time and periodontal health associated with vacuum-formed, bonded and rapid prototype retainers: A prospective clinical study.

100. MassDash: A Web-Based Dashboard for Data-Independent Acquisition Mass Spectrometry Visualization.

Catalog

Books, media, physical & digital resources

Guides

Course- and topic-based guides to collections, tools, and services.