HAPS-80's High Performance and Cost Effectiveness Has Driven Adoption by More Than 100 Companies MOUNTAIN VIEW, Calif., Nov. 27, 2019 /PRNewswire/ --Synopsys, Inc.(Nasdaq: SNPS) today announced that it has shipped more than 3,000 HAPS®-80 prototyping systems since its introduction...

WASHINGTON, Nov. 25, 2019 /PRNewswire/ -- Alion Science and Technology, a global industry leader in the design and delivery of complex engineering solutions for Defense and Intelligence agencies, held an open house to celebrate the opening of its new Prototyping, Integration, and Acquisition Center supporting the Naval Air Systems (NAVAIR) Command at Patuxent River (PAX River)...

New Delhi [India], November 23 (ANI): Builder.ai, a platform that lets people build an app without coding, announced a new tool called Builder Now for the instant prototyping of new apps. Builder Now allows businesses to prototype a tailor-made app in as little as 10 minutes, the official press release notes...

PRO DESIGN, leading supplier of high speed ASIC and SoC verification platforms, today announced the launch of its innovative high capacity proFPGA quad Stratix® 10 GX 10M system. It is the next generation of its successful, modular, scalable and most compact high performance FPGA Prototyping solution based on the recently released Intel® Stratix® 10 GX 10M FPGA, which is currently the biggest FPGA on the market...

ESI Group (Paris:ESI), world player in virtual prototyping software and services for industrials, supported its strategic partner Renault Group in the realization of the new Clio 5 concept. Thanks to this collaboration and a consortium of partners, the Clio 5 obtained a 5 star rating at the Euro NCAP safety test...

S10 10M Prodigy Logic System Speeds System Validation of Complex SoC Designs SAN JOSE, California, Nov. 20, 2019 /PRNewswire/ -- S2C, a world leader in FPGA-based prototyping solutions for accelerated SoC verification, has announced the availability of its new S10 10M Prodigy Logic System family based on Intel Stratix 10 GX 10M FPGA which will be available in Single, Dual and Quad FPGA configurations...

Polaris Design Systems, Inc., a newly established Silicon Valley company that focuses on high performance, hardware-enabled semiconductor verification solutions, has acquired the ASIC/SoC (Application Specific Integrated Circuit/System on Chip) prototyping assets of IRIS Technologies, Inc. IRIS developed and marketed multiple generations of Altera (NASDAQ: ALTR) FPGA-based ASIC prototyping solutions since 2006...

Design Prototyping Technologies, a leading provider of rapid prototyping and low-volume manufacturing services, today announced the addition of the Objet Connex500TM PolyJet MatrixTM system to its rapid product development facility in New York. The 3-dimensional printing system offers serious advantages to manufacturers and industrial designers looking to source highly detailed, multi-material models and prototypes...

Design Prototyping Technologies, a leading provider of rapid prototyping and low-volume manufacturing services, today announced the release of A Practical Guide to Prototyping. The guide is a quick reference tool for industrial designers and manufacturing engineers who outsource RP services and speed new products to market. Advances in rapid prototyping have increased the wide-spread adoption of this engineering tool, said DPT president Mike Rufo...

Steve Grundahl honed his mechanical abilities while growing up on his parent's dairy farm south of Mount Horeb, but his skills have moved far beyond tractor and equipment repairs. Since 2001, Grundahl has immersed himself in the world of 3-D printing, something he discovered while a student at the Milwaukee School of Engineering in the mid-1990s...

Prototyping Solutions would like to invite those who are interested in seeing the Objet500® Connex3T in action to attend one of our events in Florida: . Ft. Lauderdale, FL - Tuesday, Sept 30th (8:30 - 11:30 AM) . Tampa, FL - Friday, Oct 3rd (8:30 - 11:30 AM) The Stratasys 3D Printing Roadshow will include a showcasing and on-site demonstration of the Objet500® Connex3T - the world's best and first 3D Printer to offer advanced color and flexible material properties to the world of engineering plastics!...

Computer technology is putting a new spin on wheel design. Ford Motor Co. designers used rapid prototyping - making a prototype part directly from computer-aided design data - to create 6-inch models of wheels for a Lincoln concept vehicle to be displayed at this week's Detroit auto show. While rapid prototyping is not new - auto industry engineers have used the process for more than a decade to speed product development - the normal practice for developing wheel designs involves making full-sized patterns with poster board...

In a few months, Shenzhen, China-based Silver Basis Industrial Development Co. Ltd. (Booth N7332) will begin prototyping work - a rarity in China. The company's American partners, Elite Mold and Engineering and Elite Plastic Products Inc. of Detroit, specialize in prototyping, and low-volume tooling and molding. The 3-year-old partnership between Silver Basis and Elite has brought substantial growth to both firms...

Manufacturing companies should take a look at beefing up their rapid prototyping capabilities as a way to thrive in the fast-paced supply chain for mobile phones, cameras and other electronic products, in the opinion of one prominent industrial designer. Bill Moggridge, who designed the first laptop computer in 1981 and co-founded well-known product-development firm IDEO a decade later, said the ability to take ideas and quickly transform them into working prototypes can be crucial in helping firms innovate...

Rapid prototype parts made through three-dimensional printing are becoming more and more mainstream for a variety of North American manufacturers, even smaller companies. While the parts - made through stereolithography, laser sintering and other methods - were once common only for the largest manufacturers, lower prices and smaller sizes are making them a viable alternative for nearly everyone...

Bringing new products to market just got a little easier - and more affordable - for Wisconsin's small and midsize manufacturers. The Wisconsin Manufacturing Extension Partnership (WMEP) and Milwaukee School of Engineering's (MSOE) Rapid Prototyping Center (RPC) today announced a collaborative partnership that will dramatically lower costs and expand access to the Center's leading edge services...

CINCINNATI, Oct. 23, 2019 /PRNewswire-PRWeb/ -- Kaleidoscope Innovation, an insights, design and development firm, has expanded their product development capabilities to offer even more services to their clients. The all-new prototyping and assembly shop is in Cincinnati, OH. It is fully staffed by a team with a long history of working together on complex medical devices as well as products in other industries...

WESTMINSTER, Colo., July 17, 2018 /PRNewswire/ -- Midwest Prototyping, LLC., one of the nation's largest independent additive manufacturing service bureaus, announced today it will be expanding its services to Colorado after acquiring Tenere Inc.'s former rapid prototyping division. The acquisition comes as a productive solution to offer rapid prototyping services in the Colorado area after Tenere, a contract manufacturer of custom metal and plastic components and assemblies, ended its rapid prototyping services earlier this year...

DENVER, Sept. 10, 2019 /PRNewswire-PRWeb/ -- John Clark Craig, author/inventor suffered through the ultra-high-price era of product prototyping. He shares his expertise to reduce the learning curve of 3D-printing and rapid prototyping in a new book called, "Python for OpenSCAD". Craig's book provides a pathway to completely free and easy-to-use design software for 3D creations by leveraging the power of two popular programming languages: Python wrapped around free, open-source OpenSCAD 3D-modeling software...

MOUNTAIN VIEW, Calif., April 17, 2018 /PRNewswire/ -- Highlights: •Extends HAPS-80 leading performance to an easily accessible desktop form factor •Built-in infrastructure for software debug and design interaction •Fast prototype bring-up with automated prototyping flow •Broad daughterboard ecosystem for software development and system validation in context of real-world I/O Synopsys, Inc...

R.D. Abbott Co. Inc. is looking to help spread the word in North America about the liquid silicone rubber 3D printing technology developed by German RepRap GmbH and Dow Performance Silicones. Its laboratory in Cerritos is now equipped with the patent-pending Liquid Additive Manufacturing 3D printer that RepRap designed to be used in conjunction with the Silastic LC 3335 LSR grade from DowDuPont Inc...

DENVER, Nov. 7, 2017 /PRNewswire/ -- Today, 3D Systems (NYSE: DDD) announced an addition to its line of leading Selective Laser Sintering (SLS) production systems with the ProX® SLS 6100, a next-generation printing platform that enables customers to seamlessly scale from functional prototyping to low volume functional production parts...

HONG KONG, Feb. 7, 2017 /PRNewswire/ -- Stratasys Asia Pacific, subsidiary ofStratasys Ltd. (Nasdaq:SSYS), the 3D printing and additive manufacturing solutions company, today unveiled the new professional, versatile and fast FDM-based F123 Series (F170, F270 and F370) for smarter prototyping, designed to make professional rapid prototyping more productive for design workgroups...

Semtech Corporation (Nasdaq:SMTC), a leading supplier of analog and mixed-signal semiconductors, today announced the availability of a new LoRaWAN(TM)-connected development kit from wireless hardware and software manufacturer Libelium and network services and software provider Loriot that should allow designers to speed up the development and testing of their Internet of Things (IoT) applications...

SAN JOSE, Calif., May 17, 2016 /PRNewswire/ -- S2C, Inc., a leading provider of FPGA-based rapid prototyping solutions, will share their vast experience of the FPGA prototyping world with the delivery of tutorial as part of the DAC technical program titled "Overcoming Challenges of FPGA Prototyping" and the release of the jointly authored book with SemiWiki, "PROTOTYPICAL: The Emergence of FPGA-Based Prototyping for SoC Design." The tutorial will explore the techniques for FPGA prototyping success and will feature case study examples from FPGA prototyping users...

SAN JOSE, Calif., Feb. 29, 2016 /PRNewswire/ -- Hiroshima University and Cadence Design Systems, Inc. (NASDAQ: CDNS) today announced that Hiroshima University ported its traffic sign recognition algorithms to the Cadence® Protium™ rapid prototyping platform and reduced its automotive Advanced Driver Assistance Systems (ADAS) algorithm development time by up to 70 percent...

via PRWEB - World Patent Marketing, a vertically integrated manufacturer and engineer of patented products, is in the process of expanding WPM Prototyping, its engineering and prototyping division. Prototypes are essential to the design, planning and marketing of any new invention product. There are four types of prototypes which are used to test different aspects of product development; Presentation, Proof-of-Concept, Functional, and Production Prototype...

SANTA CLARA, Calif. and SAN FRANCISCO, June 24, 2015 /PRNewswire/ -- Marvell (NASDAQ: MRVL)-a worldwide leader in providing complete silicon solutions from mobile communications to storage, Internet of Things (IoT), cloud infrastructure, digital entertainment and in-home content delivery and Kinoma® software enabling the "Smart Life and Smart Lifestyle"-today announced an expansion of its solutions for embedded and Internet of Things (IoT) product prototyping...

via PRWEB - World Patent Marketing, a vertically integrated manufacturer and engineer of patented products, has announced a major expansion of its prototyping department. The patent giant is heavily expanding its Engineering Departments in Florida and California to put greater emphasis on concept design engineering for plastics, wood and metals product development...

SAN JOSE, Calif., May 18, 2015 /PRNewswire/ -- S2C, Inc., a leading provider of FPGA-based rapid prototyping solutions, has announced the availability of its Single VU440 Prodigy Logic Module that supports the latest Xilinx Virtex UltraScale 440 FPGA. The Single VU440 Prodigy LM is the smallest form factor (260 x 170mm) stand-alone FPGA prototyping system and provides: •2x density and 20% more user I/Os compared to the V7 series •8 high-performance all-purpose Prodigy connectors for a variety of system interfaces and 2 GT connectors for high-speed serial connectivity •DDR4 and built-in PCIe3 support...

via PRWEB - Eventure Interactive, Inc. (OTCBB: EVTI), a social application and technology development company, today announced the prototype of SmartSeen(TM), a wirelessly connected camera and streaming hub system that facilitates the capture and social sharing of photos and videos while using Eventure's Social Calendaring app. "Over the past year of gathering feedback from our current users, it has become evident that adding wearable cameras and a streaming hub to our social calendaring platform would enhance Eventure's value to customers," said Jason Harvey, Eventure's Head of Product...

SAN JOSE, Calif., Feb. 17, 2015 /PRNewswire/ -- Xilinx, Inc. (NASDAQ: XLNX) and BEEcube today announced they have delivered the world's first millimeter wave (mmWave) prototyping platform solution for pioneering development of 5G applications. Xilinx's newest 256QAM 500MHz mmWave modem IP coupled with the BEEcube BEE7 baseband platform provides a complete "out of the box" solution addressing the 60GHz backhaul market thereby enabling designers to work on innovative mmWave designs immediately...

SANTA CLARA, Calif., Oct. 21, 2014 /PRNewswire/ -- Marvell (NASDAQ: MRVL) today publicly launched Kinoma® Create, the JavaScript-powered Internet of Things construction kit. Kinoma Create's mission is to power the next wave of connected device prototyping. Kinoma Create is a pro-developer experience that integrates hardware, software, and tools conceived expressly to be powerful, approachable, and fast...

Embedded system design engineers looking to upgrade their 8- and 16-bit legacy designs to a 32-bit ARM CPU can do so for less than a pack of AA batteries, thanks to a new PSoC(R) 4 prototyping kit from Cypress Semiconductor Corp. (NASDAQ: CY). The $4 CY8CKIT-049 Prototyping Kit enables designers to leverage the powerful 32-bit ARM(R) Cortex(TM)-M0 core, programmable analog and digital peripherals, and the industry-leading CapSense(R) capacitive touch-sensing technology of Cypress's PSoC 4 architecture...

RAPID prototyping (RP) is a recent development in the field of manufacturing technology which involves building of prototypes layer by layer, using materials such as paper, wax, thermoplastics, etc. In contrast, conventional technologies involve techniques like casting, forming, machining, etc, to fabricate the prototype of a component from the bulk material (metal, foam, wax, etc)...

MOUNTAIN VIEW, Calif., Dec. 16, 2013 /PRNewswire/ -- Highlights: •HAPS Developer eXpress (HAPS-DX) supports up to four million ASIC gates and easily integrates with HAPS-70 systems to enable seamless software development, hardware/software integration and system validation from IP to complete SoCs •HAPS-DX includes optimized software for FPGA synthesis, debug and clock optimization supporting fast prototyping modes to accelerate time-to-first prototype •Superior debug capabilities are built in with HAPS Deep Trace Debug, which can store seconds of signal trace data, and supports Synopsys Verdi, which delivers superior debug visualization •Pre-validated DesignWare...

Reflex CES, a provider of custom embedded and complex systems, today introduced FPP25, a fast ASIC/SOC prototyping platform for emulating designs of up to 25-million ASIC gates using a stand-alone system. Based on Xilinx Virtex-7 2000T FPGAs, FPP25 exploits Reflex CES' collaboration with Flexras, an EDA company specializing in FPGA design partitioning software, and Adacsys, a functional verification software provider, to offer design engineers an easy-to-use, next generation platform to speed up validation and verification of complex, high density digital designs...

MOUNTAIN VIEW, Calif., Nov. 12, 2012 /PRNewswire/ -- Highlights: •Up to 3x improvement in system prototype performance enabled through enhanced HapsTrak® 3 I/O connector technology and high-speed time-domain multiplexing •Modular system architecture scales from 12 to 144 Million ASIC gates to accommodate a range of design sizes from individual IP blocks to processor subsystems to complete SoCs •New capability in Synopsys' Certify® software, in combination with HAPS' flexible interconnect architecture, accelerates multi-FPGA partitioning productivity by up to 10x •Enhanced Universal Multi-Resource Bus host connectivity of up to 400 MB/s facilitates debug and increases hybrid prototyping...

LEE'S SUMMIT, Mo., Aug. 8, 2012 /PRNewswire/ -- R&D/Leverage's new Opti-Sim Virtual Prototyping process, which lets PET packagers anticipate a bottle concept's impact on engineering, operations and marketing, is now available from this leading global idea-to-mold provider. According to the company's Vice President of Engineering, Dave Brunson, Opti-Sim unlocks R&D/Leverage's 35 years of PET packaging experience, and -- by performing a complete range of diagnostic, real-world simulations addressing myriad variables -- speeds time-to-market, cuts tooling and prototyping costs and enhances sustainability for both new and existing designs...

NOTICE TYPE: Modification to a Previous Presolicitation Notice DATE POSTED: 20-APR-12 OFFICE ADDRESS: Department of the Army; Army Contracting Command; ACC-APG - Washington; ATTN: CCCE-CW, 10205 Burbeck Road, Fort Belvoir, VA 22060-5863 SUBJECT: A-- Market Research Request for Information about Prototyping & Enginee for the Special Products and Prototyping Division (SPPD) Quick Respons (QRB) CLASSIFICATION CODE: A - Research & Development SOLICITATION NUMBER: W909MY12RB010 CONTACT: Marilyn Shortle, 703-704-0823 mailto:marilyn.shortle@us.army.mil [ACC-APG - Washington] SETASIDE: Total Small Business PLACE OF PERFORMANCE ADDRESS: ACC-APG - Washington ATTN: CCCE-CW, 10205 Burbeck Road Fort Belvoir VA PLACE OF PERFORMANCE ZIPCODE: 22060-5863 PLACE OF...

NOTICE TYPE: Sources Sought Notice DATE POSTED: 19-APR-12 OFFICE ADDRESS: Department of the Army; Army Contracting Command; ACC-APG - Washington; ATTN: CCCE-CW, 10205 Burbeck Road, Fort Belvoir, VA 22060-5863 SUBJECT: A-- Market Research Request for Information about Prototyping & Engineering Support for the Special Products and Prototyping Division (SPPD) Quick Response Branch (QRB)...

NOTICE TYPE: Modification to a Previous Presolicitation Notice DATE POSTED: 19-APR-12 OFFICE ADDRESS: Department of the Army; Army Contracting Command; ACC-APG - Washington; ATTN: CCCE-CW, 10205 Burbeck Road, Fort Belvoir, VA 22060-5863 SUBJECT: A-- Market Research Request for Information about Prototyping & Engineering Support for the Special Products and Prototyping Division (SPPD) Quick Response Branch (QRB)...

NOTICE TYPE: Presolicitation Notice DATE POSTED: 18-APR-12 OFFICE ADDRESS: Department of the Army; Army Contracting Command; ACC-APG - Washington; ATTN: CCCE-CW, 10205 Burbeck Road, Fort Belvoir, VA 22060-5863 SUBJECT: A-- Market Research Request for Information about Prototyping & Engineering Support for the Special Products and Prototyping Division (SPPD) Quick Response Branch (QRB)...

MOUNTAIN VIEW, Calif., July 18, 2011 /PRNewswire/ -- Highlights: •Renesas Electronics EDA teams adopt Synopsys' HAPS-64 FPGA-based prototyping systems for their FPGA prototyping environment. •The HAPS-64 system enables higher productivity resulting in time savings and high quality of results over their previous FPGA prototyping environment. •Synopsys' Universal Multi-Resource Bus (UMRBus) enables Renesas Electronics to concurrently utilize virtual (transaction-level simulation-based) and FPGA-based prototyping for advanced system & software development, debug and validation.Synopsys, Inc...

BEIJING, July 5, 2011 /PRNewswire/ -- Xilinx, Inc. (NASDAQ: XLNX) today announced that Logicview Electronic Technology Co., Ltd. has selected Virtex® -6 FPGAs for the company's next-generation prototyping system and hardware emulation platform slated for introduction in early 2012. (Logo: http://photos.prnewswire.com/prnh/20020822/XLNXLOGO) LogicView is a leading supplier of ultra-large-scale system-on-a-chip development and verification platforms that drastically shorten research and development cycles through geometric-level acceleration, high-speed communications, total signal visibility and automatic partitioning...

PRNewswire-FirstCall -- LSI Logic Corporation (NYSE: LSI) and Synplicity, Inc. (NASDAQ: SYNP) today announced that LSI has joined the Synplicity Partners in Prototyping (PIP) program. LSI will offer its system prototyping platform for the ARM926EJ-S processor through the partner program, enabling a hardware and software co-design environment. The prototyping platform is designed to ensure faster system development and a flawless transition to custom silicon, for both standard cell or Platform ASIC designs...

Stratasys Inc., Minneapolis Investor Contact: Shane Glenn, 952-294-3416 sglenn@stratasys.com or Editorial Contact: Eric Lindberg, 952-294-3446 elindberg@stratasys.com Flexible Tango Material Speeds Design Cycle by Expanding Mechanical Properties of Prototypes RedEye RPM, the world's largest rapid prototype and part-building service, today introduced a line of photo-polymer modeling materials with rubber-like properties...

PRNewswire-FirstCall -- Synopsys, Inc. (NASDAQ: SNPS), a world leader in semiconductor design software, today announced that Cavium Networks, a leader in security, network services, and embedded processor solutions has successfully deployed Synopsys' JupiterXT(TM) design planning tool to develop prototype and final floorplans for its OCTEON(TM) family of multi-core MIPS64(R) processors. Using the JupiterXT design planner, Cavium Networks was able to automatically generate and evaluate several prototype floorplans using varied inputs and then evaluate which would meet their implementation design goals...

Stratasys Inc., Minneapolis Investors: Shane Glenn, 952-294-3416 sglenn@stratasys.com or Editorial: Joe Hiemenz, 952-906-2726 jhiemenz@stratasys.com Resolution Also Improves (Nasdaq: SSYS) Stratasys today introduced the Eden350 and 350V PolyJet prototyping systems. Both offer increased resolution and the 350V offers a double speed setting. The new 350 systems are successors to the Eden333...

Trace Laboratories - Central Chris Finch, 847-934-5300 Trace Laboratories, Inc. announces its new Stereolithography (SLA) and Rapid Prototyping service group, QuickPrototyping. The QuickPrototyping group will manage and facilitate all SLA and Rapid Prototype functions formerly offered through Trace. The group and its new website, www.quickprototyping.com, were introduced at the recent Rapid Prototyping and Manufacturing Expo in St...

3D Systems Corporation Chanda Hughes, 661-295-5600 Ext. 2632 (Investors) HughesC@3dsystems.com Katharina Hayes, 803-326-3941 (Media) HayesK@3dsystems.com 3D Systems Corporation (NASDAQ:TDSC), a leading provider of rapid 3-D Printing, Prototyping and Manufacturing solutions, announced today that FineLine Prototyping, Inc., a leading service provider, purchased a Viper(TM) Pro SLA(R) system for its stereolithography manufacturing needs...

Stratasys Inc., Minneapolis Editorial Contact: Joe Hiemenz, 952-906-2726 jhiemenz@stratasys.com or Investor Contact: Shane Glenn, 952-294-3416 sglenn@stratasys.com Dell Inc. Becomes Landmark Customer for RP Leader (NASDAQ:SSYS) Stratasys announced that Dell Inc. purchased Stratasys' 6,000th rapid prototyping system. Dell became the landmark customer for Stratasys when it installed an FDM Vantage(TM) SE in May at its Product Group in Austin, Texas...

MOUNTAIN VIEW, Calif., March 1, 2011 /PRNewswire/ -- Synopsys, Inc. (Nasdaq: SNPS), a world leader in software and IP for semiconductor design, verification and manufacturing, today announced the availability of the HAPS® -600 series, the highest capacity extension of the HAPS family of FPGA-based prototyping systems. The HAPS-600 series extends FPGA-based prototyping capacity up to 81 million ASIC gates equivalent, enabling early software development for larger SoC projects...

MOUNTAIN VIEW, Calif. and SAN JOSE, Calif., March 2, 2011 /PRNewswire/ -- Synopsys, Inc. (Nasdaq: SNPS), a world leader in software and IP for semiconductor design, verification and manufacturing, and Xilinx, Inc. (Nasdaq: XLNX), the industry leader in programmable logic, today announced the availability of the FPGA-Based Prototyping Methodology Manual (FPMM), a practical guide to using FPGAs as a platform for system-on-chip (SoC) development...

Aldec, Inc., Henderson Dave Rinehart, 702-990-4400 dave@aldec.com Aldec, Inc., a pioneer in mixed-language simulation and advanced design tools for ASIC and FPGA devices, today announced the availability of the RTAX-S Prototyping Board for radiation-tolerant RTAX-S FPGAs from Actel Corporation (NASDAQ:ACTL). Easing the prototyping process of space-flight systems, the new RTAX-S Prototyping Board provides the flexibility Actel's flash-based ProASIC3 FPGAs offer, allowing designers to utilize a design across multiple aerospace projects, shorten design cycles and lower project costs...

System uses new, stronger ABSplus material along with high-end software to produce improved feature detail System uses new, stronger ABSplus material along with high-end software to produce improved feature detail Stratasys Introduces FDM 200mc Rapid Prototyping and Manufacturing System Stratasys Investor Contact: Shane Glenn, 952-294-3416 sglenn@stratasys.com or Editorial Contact: Joe Hiemenz, 952-906-2726 jhiemenz@stratasys.com Stratasys Investor Contact: Shane Glenn, 952-294-3416 sglenn@stratasys.com or Editorial...

PRNewswire -- The Royal College of Art, the world's only exclusively postgraduate art and design university, has added Z Corporation's ZPrinter(R) 450 to its unsurpassed array of 3D printing and rapid manufacturing machines, citing its speed, affordability and value per square foot. (Logo: http://www.newscom.com/cgi-bin/prnh/20040630/ZCORPLOGO) Based in London, RCA's Rapidform service produces 7,000 prototypes a year and is the world's largest academic digital manufacturing facility, operating 10 machines...

'13 Slice' Layer Thickness Adds Flexibility to FDM T-Class Systems Stratasys Inc. Editorial Contact: Joe Hiemenz, 952-906-2726 jhiemenz@stratasys.com or Investor Contact: Shane Glenn, 952-294-3416 sglenn@stratasys.com (NASDAQ:SSYS) Stratasys today announced a new build option that increases throughput up to 50 percent compared with previously available options. The enhancement affects the FDM Titan and FDM Vantage systems using ABS plastic...

PORTLAND, Ore., March 17 /PRNewswire/ -- Site9, Inc., the developer of the industry's fastest growing, cloud-based prototyping tool for website and web apps, today announced the release of ProtoShare 3.8. The new release takes prototyping to the next level with rich dynamic features available for web application and website simulation. Additionally, the ability to export a fully functioning copy of a project in web-compliant HTML format has added new potential for local versioning and usability testing...

Nexenta Systems, Inc., the leading provider of hardware independent NAS and SAN solutions, has freed another customer from the shackles of proprietary enterprise storage. FineLine Prototyping, a leading provider of rapid prototyping services, has deployed NexentaStor to speed customized prototyping solutions to its customers. FineLine produces three-dimensional models based on customers' CAD files for US-based manufacturing and consumer products companies...

Quickparts (http://www.quickparts.com), one of North America's largest providers of custom designed parts, ranging from rapid prototyping to plastic injection molding, today announced the availability of Bluestone, a high-performance stereolithography material for rapid prototyping. Bluestone is an accurate, strong, high temperature material that can be used across many industries for nearly any digital manufacturing project, including functional prototypes, jigs & fixtures, and low volume production runs that utilize the Stereolithography (SLA) process...

3D Systems Corporation (Nasdaq:TDSC), a leading provider of 3-D Printing, Rapid Prototyping and Manufacturing solutions, announced today that Midwest Prototyping, LLC, has upgraded to an iPro(tm) 9000 Center to increase its Stereolithography large-part capacity. Midwest Prototyping, located in Blue Mounds, Wis., is a recent addition to the 3D Systems' Preferred Parts Service Provider (PSP) program...

PRNewswire -- Browzwear International, the pioneer of 3D fashion design and communication software, launches a comprehensive 3D virtual prototyping implementation solution. Leveraging its experience in the fashion industry, Browzwear will provide full 3D project management including consulting, implementation, support and training. As part of the initiative, Browzwear launches V-viewer and V-styler, new applications that expand the effect of 3D design and communication to all involved parties throughout the entire product lifecycle...

PRNewswire-FirstCall -- Synopsys, Inc. (NASDAQ: SNPS), a world leader in software and IP for semiconductor design and manufacturing, is introducing a new addition to the popular HAPS(TM) (High-performance ASIC Prototyping System(TM)) product family from the company's Synplicity(R) Business Group. The HAPS-51T, leveraging the advanced capabilities of Xilinx's Virtex(R)-5 LX330T devices, is an ideal prototyping system for applications using high-speed serial interfaces like PCI Express, SATA and Gigabit Ethernet...

Research and Markets has announced the addition of the "Virtual Reality for Enterprise and Industrial Markets " report to their offering. The report forecasts that the market for enterprise VR hardware and content will grow from $592.3 million in 2016 to $9.2 billion by 2021, representing a compound annual growth rate (CAGR) of 59.6%...

WASHINGTON, Sept. 22 -- The U.S. Army Test and Evaluation Command issued the following news: By Nancy Jones-Bonbrest U.S. Army If the unthinkable were to unfold in Europe, the Army's 2nd Cavalry Regiment (2CR) would be among the first in line to respond. Recognizing the potential consequences of Russian aggression, tactics and capabilities, the Army has targeted 2CR to receive several advanced technologies designed to bridge gaps against the near-peer threat...

PARIS, Nov. 10 -- ESI Group issued the following news release: ESI Forum represents an opportunity to learn more about ESI's System Modeling tools, such as ESI's SimulationX and ESI Scilab, as well as attend several sessions on Casting, Sheet Metal, Welding, Virtual Performance, Vibro-Acoustics, Virtual Reality, and Computational Fluid Dynamics (CFD)...

3D Systems (NYSE:DDD) today announced its next generation Quickparts e-commerce experience for fast-turn prototyping, offering metal and plastic prototypes with delivery in as little as one day. By uploading a CAD file for immediate quote or expert consultation, customers access a direct path to production with the highest quality output in the industry...

> ROHM has recently announced the availability of USB Power Delivery (USBPD) compatible transmitter/receiver evaluation boards designed to connect to information and peripheral devices using the new Type-C connector. ROHM has recently announced the availability of USB Power Delivery (USBPD) compatible transmitter/receiver evaluation boards designed to connect to information and peripheral devices using the new Type-C connector...

PARIS, Oct. 31 -- ESI Group issued the following news release: Who? ESI Group is a leading innovator in Virtual Prototyping software and services for manufacturing industries. Specialist in material physics, ESI has developed a unique proficiency in helping industrial manufacturers replace physical prototypes with virtual prototypes, allowing them to virtually manufacture, assemble, test and pre-certify their future products...

ALBUQUERQUE, N.M., Aug. 8 -- The Central New Mexico Community College issued the following news release: Jim Berry, an instructor for CNM's Rapid Prototyping & Innovative Design program, will showcase 3-D printers and other equipment needed to design and make prototypes at the 2017 Albuquerque Mini Maker Faire Aug. 26-27 at the Albuquerque International Balloon Museum...

Targeted News Service WASHINGTON, Nov. 18 -- The conference report (H.Rpt. 115-404) was issued on legislation (H.R. 2810) to authorize appropriations for fiscal 2018 for military activities of the Department of Defense, for military construction, and for defense activities of the Department of Energy, to prescribe military personnel strengths for such fiscal year...

PARIS, July 11 -- ESI Group issued the following news release: ESI Group, leading innovator in Virtual Prototyping software and services for manufacturing industries, announces it will hold multiple international ESI Forums between September and November in North America, Germany and Japan. These events provide opportunities to learn more about the latest innovations in ESI's software solutions, to witness exceptional examples of how our customers benefit from Smart Virtual Prototyping, and to network with fellow users, worldwide industry experts, academics, and partners...

ALEXANDRIA, Va., April 13 -- Microsoft Technology Licensing, Redmond, Washington, has been assigned a patent (9,619,128) developed by two co-inventors for the "dynamic presentation prototyping and generation." The co-inventors are Darren K. Edge, Beijing, and Koji Yatani, Beijing. The patent application was filed on July 1, 2013 (13/933,030). The full-text of the patent can be found at http://patft.uspto.gov/netacgi/nph-Parser?Sect1=PTO1&Sect2=HITOFF&d=PALL&p=1&u=%2Fnetahtml%2FPTO%2Fsrchnum.htm&r=1&f=G&l=50&s1=9,619,128.PN.&OS=PN/9,619,128&RS=PN/9,619,128 Written by Deviprasad Jena; edited by Sudarshan Harpal...

By Targeted News Service ORLANDO, Fla., Nov. 19 -- The U.S. Army Contracting Command has issued a sources sought notice (W900KK-18-R-0029) for analysis, prototyping, training, operations and rehearsal services for Special Operations Forces. Excerpts of the notice state: The project has a requirement to support the U.S. Army Program Executive Office for Simulation, Training and Instrumentation, Product Manager SOF Training Systems in procuring Engineering Support Services, Training Services and Research and Development efforts in support of expanding the existing SOF RAPTOR effort currently identified on the SOF RAPTOR III contract...

The U.S. Army announced Wednesday that it is looking to recruit soldiers to provide input through online gameplay to help develop the Operation Overmatch crowd-sourced innovation platform. Operation Overmatch is part of the Early Synthetic Prototyping program designed to connect scientists, soldiers and engineers with their ideas on prototype weapons, equipment and tactics...

PORTLAND, Ore., Nov. 12, 2019 /PRNewswire/ -- Circuit edit (CE) engineers, whether supporting designers or in service labs, who are looking for a cost-effective solution can increase their productivity with the next-generation Thermo Scientific Centrios circuit edit system. Announced today at the International Symposium for Testing and Failure Analysis (ISTFA) 2019, Centrios is a robust focused ion beam (FIB) circuit edit system that offers sophisticated capabilities typically associated with the most advanced systems...

The University of Maine's (UMaine) new 3D printing capability will enable the rapid production of products and prototypes for the US Army. Recently acquired, the world's largest 3D printer will deliver innovations in defence equipment. Unveiled last month, the printer will see the US Army Combat Capabilities Development Command (CCDC) Soldier Center (SC) and UMaine work on advancing the 3D printing capability...

Spanish footwear brand Camper is using 3D printing to streamline its creative process by enabling its designers and engineers to produce three-dimensional prototypes on a daily basis. The firm, which is headquartered in Inca in Mallorca, produces footwear collections for men, women and children, and creates around 500 styles each season that are sold in stores in over 40 countries....

by MYRA TUGADE Targeted News Service WASHINGTON, Nov. 9 -- Rep. Michael F. Doyle, D-Pa., has introduced legislation (H.R. 5000) to amend the National Telecommunications and Information Administration Organization Act "to provide for the establishment of an electromagnetic spectrum sharing prototyping program and an integrated spectrum automation enterprise strategy." The bill was introduced on Nov...

Bengaluru,KARNATAKA Bengaluru-based Centre for Cellular and Molecular Platforms (C-CAMP), with support from National BioPharma Mission (NBM), BIRAC and DBT, has announced that it will soon launch a first-of-its-kind national medtech rapid prototyping facility with a focus on Microfluidics technologies. The facility aims to provide design and prototyping support to medtech startups in developing low-cost, rapid and point-of-care Microfluidic Device solutions with applicability in healthcare, both human and animal health...

BOSTON, Nov. 5, 2019 /PRNewswire/ -- FinMason, an investment analytics provider that enables WealthTech platforms to accelerate development and time-to-market, today announced that BodesWell.io, a software company that combines personal financial data, economic models of the future, and an incredibly simple interface to take away the overwhelming aspects of financial planning, has signed up for the FinSpring accelerator program...

WASHINGTON, Nov. 1 -- Department of the Navy, United States Marine Corps, has issued a presolicitation notice (M67854-20-PA-4650) for "Program Manager Wargaming Capability Integrated Prototyping Pre-solicitation Notice #1". This presolicitation notice was posted on Oct. 31 and the response date is Nov. 12. Contract, Tender Notice Type: Presolicitation The NAICS code for this requirement is 541512...

MOUNTAIN VIEW, Calif., Oct. 29, 2019 /PRNewswire/ -- Synopsys, Inc. (Nasdaq: SNPS) today announced that it has shipped more than 3,000 HAPS® -80 prototyping systems since its introduction. HAPS-80 is deployed at more than 100 companies worldwide, including nine of the top 10 semiconductor companies, to accelerate software development and system validation across a wide range of consumer, wired and wireless communications, industrial, AI, and computing/storage applications...

Kratos Defense & Security Solutions has received a contract for the development of a virtual prototyping holodeck (VPH) for the US Army. The applied research contract was awarded by Army's Command, Control, Computers, Communications, Cyber, Intelligence Surveillance and Reconnaissance (C5ISR) Center, Night Vision and Electronic Sensors Directorate (CERDEC NVESD). NVESD will use the VPH to assess the physical and psychological performance of troops in simulated real-world equipment and battle conditions...

Kratos Defense & Security Solutions, Inc. (Nasdaq: KTOS), a leading National Security Solutions provider, announced today that it was awarded a multi-million dollar contract to develop a VPH to simulate real-world equipment and battle conditions for NVESD. Using Cross Reality (XR) technologies, NVESD's objective is to better understand how soldiers react to the technology and evaluate its impact on their performance...

WASHINGTON - Space technology is developing so fast that by the time the tech makes it through the acquisitions process and into orbit, it's practically obsolete. "The technology is moving at such an accelerated pace and these technologies are on such a steep trajectory that the traditional acquisition system just frankly can't keep up," explained Ken Peterman, president of government systems for Viasat...

DUBLIN, July 20, 2018 /PRNewswire/ -- The "Rapid Prototyping Systems Market US Units Sold, Average Selling Prices, Product Pipeline, Forecasts 2018-2024 MedCore" report has been added to ResearchAndMarkets.com's offering. The majority of rapid prototyping systems are currently lab based although new unit sales are being driven by the office setting...

PORTLAND, Ore., Feb. 9 -- Oregon Institute of Technology issued the following news release: College and university student inventors are gearing up for a season of entrepreneurial competitions across the state of Oregon, culminating in the InventOR competition this June in Klamath Falls. Designed to increase the number of inventors and entrepreneurs across the state, InventOR challenges the winners from campus and regional competitions to compete for a top prize of $25,000...

WASHINGTON, March 29 -- Department of the Navy, Space and Naval Warfare Systems Command has a requirement for "Prototyping lab usage." The solicitation no. N66001-18-Q-7018 was posted on March 28, 2018. All responses are due by March 29, 2018. Notice Type: Combined Synopsis/Solicitation The NAICS code for this requirement is 541715...

WASHINGTON, June 11 -- Department of the Air Force, Air Force Space Command, has issued a presolicitation notice (18-087) for "Military GPS User Equipment (MGUE) Modernized Handheld Receiver Risk Reduction & Prototyping Industry Day Announcement". This presolicitation notice was posted on June 8 and the response date is June 18. Contract, Tender Notice Type: Presolicitation The NAICS code for this requirement is 334220...

WASHINGTON, Aug. 10 -- Department of the Navy, Space and Naval Warfare Systems Command has a requirement for "Commercial Solutions Opening (CSO): Fight the Naval Force Forward - Information Warfare Prototyping and Experimentation Campaign." The solicitation no. N66001-18-S-C001 was posted on August 9, 2018. All responses are due by October 3, 2018...

NUREMBERG, Germany, Feb. 27, 2018 /PRNewswire-PRWeb/ -- Atmosphere IoT Corp. is demonstrating their web-based IDE, Atmosphere Studio™, on the newly announced Rapid IoT prototyping kit at Embedded World, an industry trade fair and conference that gathers more than 30,000 attendees this week from around the world in Nuremberg, Germany. Rapid IoT, which was created by NXP® Semiconductors, is a comprehensive, secure and power-optimized IoT end node solution based on NXP's expansive technology portfolio, including processing, connectivity, security, NFC and sensing...

BEAVERTON, Ore. and BERKELEY, Calif., June 20, 2018 /PRNewswire/ -- Voltaiq, the leader in Battery Intelligence™ solutions, today announced that it was selected by Mobile Power Solutions (MPS) to provide comprehensive battery data analytics that enhance their R&D, assembly and manufacturing, and safety and performance testing capabilities. To further improve MPS' leadership in the battery industry, they are creating an environment around Voltaiq Core™ that will provide MPS with near real-time visibility into all aspects of their battery certification and testing services...

ROCK HILL, S.C., Nov. 6, 2018 /PRNewswire/ -- 3D Systems (NYSE: DDD), the originator of 3D printing, today announced ACS Custom, a UK-based digital production house for custom hearing protection, in-ear monitors and other communication devices, has transformed its manufacturing workflow by incorporating two Figure 4™ Standalone 3D printers. As a result of the enhanced workflow, ACS has realized a 4X increase in capacity and 2X increase in efficiency while reducing material consumption by 50% and labor cost by as much as 80% on one part...

ROCK HILL, S.C., April 2, 2018 /PRNewswire/ -- Next week in St. Louis, 3D Systems and its customers will participate in the 30th annual Additive Manufacturing Users Group (AMUG) Conference to share strategies and workflows for 3D printing solutions to make manufacturing more efficient, responsive, and cost effective. Manufacturers can begin with 3D Systems' affordable, industrial 3D printing solutions and grow into the company's full production factory solutions for plastics and metals...

TYSONS CORNER, Va., July 26, 2018 /PRNewswire/ -- MicroTech is proud to announce its selection as a Prime contractor to the U.S. Army Rapid Acquisition for Materials for Prototyping (RAMP) Contract. RAMP is a $192 million multiple award contract that develops, prototypes, evaluates, and provides worldwide technical and field support of advanced Research and Development (R&D) and specialized sensors for Night Vision and Electronic Sensors Directorate (NVESD) and other agencies...