articles+ search results

17 articles+ results

1 - 17
View results as:
Number of results to display per page

1. Research on Refrigerative Stereo-Lithography [1997]

  • Akiya KAMIMURA, Atsushi KAZAMA, Naomasa NAKAJIMA, Tamotsu MURAKAMI, 中島 尚正, 村上 存, 神村 明哉, and 風間 敦
  • 日本機械学会論文集 C編 / Transactions of the Japan Society of Mechanical Engineers Series C. 1997, 63(606):605

2. KANSEI-Based Quantitative Satisfactory Design of Artifacts Using Neural Networks : Its Application to Subjective Evaluation for Handling and Stability of Vehicle [1998]

  • Akihiro MATSUDA, Genki YAGAWA, Masao NISHIOKA, Shinobu YOSHIMURA, Takanori HIRATA, 吉村 忍, 平田 隆教, 松田 聡浩, 矢川 元基, and 西岡 正夫
  • 日本機械学会論文集 C編 / Transactions of the Japan Society of Mechanical Engineers Series C. 1998, 64(619):1004

3. Research on Shape of Solidified Resin in Stereo-Lithography : Comparison with Measured and Estimated Shape of Solidified Resin [1999]

  • Shigeru NAGAMORI, Toru YOSHIZAWA, 吉澤 徹, and 永森 茂
  • 日本機械学会論文集 C編 / Transactions of the Japan Society of Mechanical Engineers Series C. 1999, 65(639):4558

4. Rapid Manufacturing System by Sheet Steel Laminating Method [2000]

  • Jun SHINOZUKA, Masahiko YOSHINO, Toshiyuki OBIKAWA, 吉野 雅彦, 帯川 利之, and 篠塚 淳
  • 日本機械学会論文集 C編 / Transactions of the Japan Society of Mechanical Engineers Series C. 2000, 66(642):667

5. Research on Refrigerative Stereolithography : Accurate Fabrication with High Degree of Freedom by Sol-Gel Transformable Resin and UV-Blocking Layer [2000]

  • Akiya KAMIMURA, Naomasa NAKAJIMA, Tamotsu MURAKAMI, 中島 尚正, 村上 存, and 神村 明哉
  • 日本機械学会論文集 C編 / Transactions of the Japan Society of Mechanical Engineers Series C. 2000, 66(649):3201

6. Study on Product Development Method by Design Navigation Method [2001]

  • Hiromu NAKAZAWA and 中沢 弘
  • 日本機械学会論文集 C編 / Transactions of the Japan Society of Mechanical Engineers Series C. 2001, 67(658):2090

7. Research on Solidification of Photo-Curing Resin in Stereo-Lithography : Effect of Resin Properties on Curing of Resin and Dimensional Estimation of Cured Resin [2002]

  • Shigeru NAGAMORI, Toru YOSHIZAWA, 吉澤 徹, and 永森 茂
  • 日本機械学会論文集 C編 / Transactions of the Japan Society of Mechanical Engineers Series C. 2002, 68(667):1021

8. Vehicle Dynamics Analysis Using Parallel Loop Simulation : Development of Simulation Method Which Refuses Circulation of the Integrated Value of Tire Force Error [2003]

  • Etsuo KATSUYAMA, Naoto FUKUSHIMA, 勝山 悦生, and 福島 直人
  • 日本機械学会論文集 C編 / Transactions of the Japan Society of Mechanical Engineers Series C. 2003, 69(684):2120

9. Fabrication of Micro Fluidic Chip with Micro-Injection Port by Ink-Jet Rapid Prototyping Method and Its Evaluation [2005]

  • Fumihito ARAI, Kazutoshi MAEDA, Toshio FUKUDA, 前田 憲利, 新井 史人, and 福田 敏男
  • 日本機械学会論文集 C編 / Transactions of the Japan Society of Mechanical Engineers Series C. 2005, 71(701):100

10. Stereolithography Using Direct-Mask Area Exposure Positive Direct-Mask Area Exposure Using Photo-Initiator as Mask [2005]

  • Kazuhisa TAKUMI, Taku YADA, Tamotsu MURAKAMI, 宅見 和久, 村上 存, and 矢田 拓
  • 日本機械学会論文集 C編 / Transactions of the Japan Society of Mechanical Engineers Series C. 2005, 71(711):3314

11. Development of a Forging Type Rapid Prototyping System Phenomenon in Metal Hammering on the Basis of CAD Data [2005]

  • Hidetake TANAKA, Masatoshi HIRAD, Naoki ASAKAWA, Toshihiko SHINTANI, 平尾 政利, 新谷 俊彦, 浅川 直紀, and 田中 秀岳
  • 日本機械学会論文集 C編 / Transactions of the Japan Society of Mechanical Engineers Series C. 2005, 71(711):3320

12. On the Mechanism of the Hot Wire Cutting of Polystyrene Foam Cutting Characteristics of the Dwelling Wire [2006]

  • Tomohisa TANAKA, Yoshio SAITO, 田中 智久, and 齋藤 義夫
  • 日本機械学会論文集 C編 / Transactions of the Japan Society of Mechanical Engineers Series C. 2006, 72(722):3383

13. Stereolithography Mock-up with Internal Camera for Interface Simulation and Usability Data Acquisition [2007]

  • Michiki NAKANO, Tamotsu MURAKAMI, 中野 道樹, and 村上 存
  • 日本機械学会論文集 C編 / Transactions of the Japan Society of Mechanical Engineers Series C. 2007, 73(727):927

14. Study on Product Development Method by Design Navigation Method Process in Consideration of Interaction Effects among Design Parameters [2007]

  • Hiromu NAKAZAWA, Toshitake TATENO, 中沢 弘, and 舘野 寿丈
  • 日本機械学会論文集 C編 / Transactions of the Japan Society of Mechanical Engineers Series C. 2007, 73(730):1898

15. Graphical Language for Problem Solving [2007]

  • Takeshi KISHINAMI and 岸浪 建史
  • 日本機械学会論文集 C編 / Transactions of the Japan Society of Mechanical Engineers Series C. 2007, 73(735):2873

16. Underactuated Five-Finger Prosthetic Hand Inspired by Grasping Force Distribution of Humans [2008]

  • Takashi MAENO, Yasuhisa KAMIKAWA, 前野 隆司, and 神川 康久
  • 日本機械学会論文集 C編 / Transactions of the Japan Society of Mechanical Engineers Series C. 2008, 74(746):2542

17. Analysis and Evaluation of Support for Tailor-Made Multilayer Piezoelectric Actuator [2008]

  • Fumihito ARAI, Masahiro NAKAJIMA, Naoya TODA, Toshio FUKUDA, 中島 正博, 当田 直哉, 新井 史人, and 福田 敏男
  • 日本機械学会論文集 C編 / Transactions of the Japan Society of Mechanical Engineers Series C. 2008, 74(747):2778

Catalog

Books, media, physical & digital resources
See catalog results

Guides

Course- and topic-based guides to collections, tools, and services.
Search ""Prototyping"" in all guide pages