articles+ search results

1,041 articles+ results

1 - 100
View results as:
Number of results to display per page

1. Prototyping the System of Writing Tools for Japanese Documents. [1986]

  • Jeehee Yoon, Junji Hinami, Kazuo Ushijima, Toshihisa Takagi, 尹 志煕, 日並 順二, 牛島 和夫, and 高木 利久
  • コンピュータ ソフトウェア / Computer Software. 1986, 3(1):1-35

2. Requirement Analysis and Prototyping [1986]

  • Tetsuo TAMAI and 玉井 哲雄
  • 品質 / Journal of The Japanese Society for Quality Control. 1986, 16(1):38

3. Fourth Generation Languages for Evolutionary Prototyping Life Cycle [1990]

  • Yasuki SEKIGUCHI and 関口 恭毅
  • オフィス・オートメーション / OFFICE AUTOMATION. 1990, 10(4):10

4. A Study of Prototyping on Business Data Processing Systems [1990]

  • Kunio AIDA and 会田 邦夫
  • オフィス・オートメーション / OFFICE AUTOMATION. 1990, 10(4):51

5. Rapid Prototyping Tools for Real-time Expert Systems in the Steel Industry [1990]

  • A. R. McNamara, B. J. Orenstein, D. J. H. Brown, H. M. Lie, K. C. Teh, and L. G. Lock Lee
  • ISIJ International. 1990, 30(2):90

6. An AI Tool and Its Applications to Diagnosis Problems [1990]

  • Hiroshi Narazaki, Kayako Omura, Masami Konishi, Toshiharu Iwatani, and Yoshihisa Otsuka
  • ISIJ International. 1990, 30(2):98

7. An Expert System of Automatic Slab Assignment for Hot Strip Mill [1990]

  • Akihiro Hori, Hiroshi Ishihara, Tsuyoshi Odaira, and Yoshihiro Jimichi
  • ISIJ International. 1990, 30(2):155

8. Personal System for Satellite Image Analysis and Environmental Monitoring [1990]

  • A. Ikeshiro, S. Rokugawa, T. Matsunaga, and Y. Ishii
  • Journal of The Remote Sensing Society of Japan. 1990, 10(1):93

9. An Automatic Shape Modification using Surface Constraints in CSG [1990]

  • Shinji TOKUMASU, Tomotoshi ISHIDA, Yasumasa KAWASHIMA, 川島 泰正, 徳増 真司, and 石田 智利
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1990, 56(4):703

10. A Rule-Based Narai-Design System for CIM for Shipbuilding [1991]

  • Kenji Doi
  • Journal of the Society of Naval Architects of Japan. 1991, 1991(170):805

11. Production Control System for CIM for Shipbuilding [1991]

  • Kazutoshi Horiuchi, Takahisa Minemura, and Toshiyuki Amemiya
  • Journal of the Society of Naval Architects of Japan. 1991, 1991(170):827

12. A SONY M-O DRIVE-BASED DATA ACQUISITION AND STORAGE PROTOTYPE SYSTEM [1991]

  • D. NGUYEN, L. GUPTA, P. CHU, S. COOPERMAN, T.T. CHIANG, and Y.K. TANG
  • Journal of the Magnetics Society of Japan. 1991, 15(S_1_MORIS_91)437

13. Interface Developments to Distributed Materials Data Systems(1) [1991]

  • Hailong CHEN and Shuichi IWATA
  • Joho Chishiki Gakkaishi. 1991, 2(1):63

14. Laser-fabrication Technology for Solid Objects [1992]

  • Masanobu YAMAMOTO and 山本 眞伸
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1992, 58(3):435

15. Shape Analysis of Solidified Photopolymer for the Three Dimensional Photofabrication Measurement of Critical Exposure [1993]

  • Hiroyuki NARAHARA, Katsumasa SAITO, 斎藤 勝政, and 楢原 弘之
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1993, 59(9):1477

16. Study on the Solidified Depth Parameters Capable of Quantitative Comparison of Photopolymers for Three Dimensional Photofabrication [1993]

  • Hiroyuki NARAILARA, Katsumasa SAITO, 斎藤 勝政, and 楢原 弘之
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1993, 59(11):1803

17. Prototyping A Image Drawing Tool for User Support System [1993]

  • Akira Ito, Takuya Taro, Tsuyoshi Ebina, 伊藤 昭, 海老名 毅, and 田路 琢也
  • テレビジョン学会技術報告 / ITE Technical Report. 1993, 17(73):9

18. Virtual Reality and It's Applications [1994]

  • Katsuyuki MURATA, Miwako DOI, Nobuko KATO, 加藤 伸子, 土井 美和子, and 村田 克之
  • Proceedings of Annual Conference, Japan Society of Information and Knowledge. 1994, :63

19. A Method of Verifying a Switching SDL Specification by Utilizing Petri Nets [1994]

  • Haruo HASEGAWA
  • Transactions of the Society of Instrument and Control Engineers. 1994, 30(6):685

20. Theoretical Analysis of Laser Optics for the Rapid Prototyping [1994]

  • Hiroyuki NARAHARA, Katsumasa SAITO, 斎藤 勝政, and 楢原 弘之
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1994, 60(7):994

21. Optical System Analysis of the Rapid Prototyping Identification of the Laser Power Density Distribution [1994]

  • Hiroyuki NARAIIARA, Katsumasa SAITO, 斎藤 勝政, and 楢原 弘之
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1994, 60(8):1117

22. Study of the Fabricated Condition of UV-cured Resin [1994]

  • Kazuaki SHIKICHI, Masayoshi HORIUCHI, Nobuyuki KONDOU, Youichi KITAMURA, and Yukinobu YAO
  • Seikei-Kakou. 1994, 6(9):642

23. Studies on Solid Formation Mechanism of Three Dimensional Photofabrication (1st Report) Investigation of Solidified Unit Shape [1995]

  • Hiroyuki NARAHARA, Katsumasa SAITO, Satoru IGARASHI, Shinichi KOJIMA, 五十嵐 悟, 小島 真一, 斎藤 勝政, and 楢原 弘之
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1995, 61(1):117

24. Study on the Improvement of Surface Roughness of Complex Model Created by Three Dimensional Photofabrication (1st Report) Proposal of Lift up Irradiation Method [1995]

  • Hiroyuki NARAHARA, Katsumasa SAITO, 斎藤 勝政, and 楢原 弘之
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1995, 61(2):233

25. EDUCATION OF MSC AND PHD STUDENTS IN FLUID POWER AND MECHATRONICS AT DTU [1996]

  • Finn Conrad
  • Proceedings of the JFPS International Symposium on Fluid Power. 1996, 1996(3):37

26. Recent Advances in Laser Technologies Potential Medical Applications [1996]

  • Shunichi Sato and 佐藤 俊一
  • 日本レーザー医学会誌 / Nippon Laser Igakkaishi. 1996, 17(Supplement):175

27. Designing and Prototyping of Airport Traffic Management System [1996]

  • Kakuichi SHIOMI and 塩見 格一
  • 日本航海学会論文集 / The Journal of Japan Institute of Navigation. 1996, 94:145

28. Applications of Layered Manufacturing [1996]

  • Takeo NAKAGAWA
  • The Review of Laser Engineering. 1996, 24(4):443

29. Development of Rapid Prototyping Technology -from Plastic Models to Metal Parts- [1996]

  • Yoji MARUTANI
  • The Review of Laser Engineering. 1996, 24(4):467

30. Experimental Research of a Nonholonomic Manipulator [1996]

  • Ole Jakob Sørdalen, Woojin Chung, and Yoshihiko Nakamura
  • Journal of the Robotics Society of Japan. 1996, 14(5):694

31. Effects of Aluminum and Copper Contents on Microstructure of Zinc Alloy for Mold [1996]

  • Jiro Yamashita, Masumi Kunii, Norihiko Fukatsu, and Teruo Ohashi
  • Journal of Japan Foundry Engineering Society. 1996, 68(9):777

32. Control Development with Rapid Prototyping dSPACE with DSP Processor [1996]

  • (株) リンクスコーポレーション and Linx Corporation
  • 計測と制御 / Journal of The Society of Instrument and Control Engineers. 1996, 35(10):824

33. Laser Lithography for Making Jewelry (1st Report) An Idea of Diagonal Irradiation [1996]

  • Hiroshi MAKINO, Noriaki KIYOHIRO, Shigeru HAGIHARA, Susumu FURUKAWA, 古川 進, 清弘 智昭, 牧野 洋, and 萩原 茂
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1996, 62(11):1587

34. MICRO-HARDNESS MEASUREMENT OF PHOTOPOLYMER IN STEREOLITHOGRAPHY [1997]

  • Masato IMAMURA, Takeo NAKAGAWA, and Yi XU
  • Journal of Photopolymer Science and Technology. 1997, 10(2):181

35. Fabrication of Solid Models by Sequential Solidification of Liquid Polymer [1997]

  • Takayuki KAMITANI and Yoji MARUTANI
  • Journal of Photopolymer Science and Technology. 1997, 10(2):187

36. 3D Profile Generation by Dot-Matrix EDM (1st Report) Proposal of Dot-Matrix EDM [1997]

  • Katsushi FURUTANI, Naotake MOHRI, Toshio ENAMI, 古谷 克司, 毛利 尚武, and 江南 俊夫
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1997, 63(2):254

37. Fast Prototyping of Video Interface Controller for AMLCD System [1997]

  • H.C. Huang, H.S. Kwok, and P.W. Cheng
  • ITE Technical Report. 1997, :141

38. Research on Refrigerative Stereo-Lithography [1997]

  • Akiya KAMIMURA, Atsushi KAZAMA, Naomasa NAKAJIMA, Tamotsu MURAKAMI, 中島 尚正, 村上 存, 神村 明哉, and 風間 敦
  • 日本機械学会論文集 C編 / Transactions of the Japan Society of Mechanical Engineers Series C. 1997, 63(606):605

39. Prototyping and Control Experiments of a Cartesian Nonholonomic Robot [1997]

  • Kenichi Machida, Michitaka Funaki, and Zheng-Hua Luo
  • Journal of the Robotics Society of Japan. 1997, 15(2):243

40. Expectation of Rapid Prototyping [1997]

  • Takeshi KISHINAMI and 岸浪 建史
  • 日本機械学会誌 / Journal of the Society of Mechanical Engineers. 1997, 100(941):362

41. Laser Lithography for Making Jewels (2nd Report) An Algorithm of Diagonal Irradiation Method [1997]

  • Hiroshi MAKINO, Noriaki KIYOHIRO, Shigeru HAGIHARA, Susumu FURUKAWA, 古川 進, 清弘 智昭, 牧野 洋, and 萩原 茂
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1997, 63(5):652

42. Effect of Dissolved Gases on Porosity Formation of Cast Zinc Alloy [1997]

  • Jiro Yamashita, Makoto Ueda, Norihiko Fukatsu, and Teruo Ohashi
  • Journal of Japan Foundry Engineering Society. 1997, 69(8):635

43. 22p-H-3 Prototyping of the data acquisition system by using distributed object oriented language. [1997]

  • Eiji Inoue, Hideyo Kodama, Hirofumi Fujii, Hiroshi Yoshida, Yasuhisa Tajima, Yasunobu Sakamoto, Yoshiji Yasu, 井上 栄二, 児玉 英世, 吉田 浩司, 坂本 泰伸, 安 芳次, 田島 靖久, and 藤井 啓文
  • Meeting Abstracts of the Physical Society of Japan. 1997, :25

44. Die & Mold and Rapid Prototyping [1997]

  • Hiroyuki NARAHARA and 楢原 弘之
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1997, 63(9):1236

45. FEM Analysis of Melting Behavior of Metal Powders in Laser Prototyping [1997]

  • Akihiro Yoshidome, Fumie Abe, Kozo Osakada, and Masanori Shiomi
  • Journal of Japan Foundry Engineering Society. 1997, 69(11):930

46. Rapid Prototyping (3-D Printer) [1997]

  • 早野 誠治
  • 日本機械学会誌 / Journal of the Society of Mechanical Engineers. 1997, 100(949):1237

47. Generation of Three-dimensional Structure Using Metal Jet [1998]

  • Katsuhiko SAKAI, Katsumi YAMAGUCHI, Takao HIRAYAMA, Takashi YAMANAKA, 山中 隆, 山口 勝美, 平山 孝雄, and 酒井 克彦
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1998, 64(10):1497

48. Implementation of a 3D User Interface Tool-kit [1998]

  • Haruo Takemura, Kiyoshi Kiyokawa, Naokazu Yokoya, Takashi Okuma, Yoshihiko Seri, 世利 至彦, 大隈 隆史, 横矢 直和, 清川 清, and 竹村 治雄
  • ITE Technical Report. 1998, :95

49. KANSEI-Based Quantitative Satisfactory Design of Artifacts Using Neural Networks : Its Application to Subjective Evaluation for Handling and Stability of Vehicle [1998]

  • Akihiro MATSUDA, Genki YAGAWA, Masao NISHIOKA, Shinobu YOSHIMURA, Takanori HIRATA, 吉村 忍, 平田 隆教, 松田 聡浩, 矢川 元基, and 西岡 正夫
  • 日本機械学会論文集 C編 / Transactions of the Japan Society of Mechanical Engineers Series C. 1998, 64(619):1004

50. ATNパラダイム対応航空管制シミュレータの試作と評価 [1998]

  • Kakuichi SHIOMI, Ken ITANO, Masao NISHIDA, Ryuji OTSUKA, 塩見 格一, 大塚 竜治, 板野 賢, and 西田 昌央
  • 日本航海学会論文集 / The Journal of Japan Institute of Navigation. 1998, 98:71

51. Prototyping Method Using Quality Function Deployment － A Study on Development of Scheduling Systems－ [1998]

  • Akihiro ABE, Tadashi YOSHIZAWA, 吉澤 正, and 阿部 昭博
  • 品質 / Journal of The Japanese Society for Quality Control. 1998, 28(2):73

52. Shelling Operation for Triangular Mesh by Vertex Offsetting [1998]

  • Fumihiko KIMURA, Hiromasa SUZUKI, Takashi KANAI, Yusuke SAKURAI, 木村 文彦, 桜井 勇亮, 金井 崇, and 鈴木 宏正
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1998, 64(6):835

53. Rapid Prototyping by Free Sintering Method (1st Report) Fundamental Study [1998]

  • Hiromu NAKAZAWA, Mitsuo ISHIKAWA, Yusuke MATSUMOTO, 中沢 弘, 松本 祐介, and 石川 光男
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1998, 64(7):1078

54. Laser Micro Fabrication Using Green Tape [1998]

  • Ikuya OHSHIMA, Katsuhiro MAEKAWA, Satoshi KOKURA, Yuichi YOKOYAMA, 前川 克廣, 大島 郁也, 小倉 慧, and 横山 雄一
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1998, 64(9):1340

55. VIRTUAL PROTOTYPING OF HYDRAULIC DRIVEN MECHATRONIC MACHINES [1999]

  • Aki MIKKOLA, Heikki HANDROOS, and Mikko LIUKKULA
  • Proceedings of the JFPS International Symposium on Fluid Power. 1999, 1999(4):525

56. A Study of Design Environment for Behavioral Prototyping [1999]

  • Satoshi OZEKI, Toshiharu TAURA, 尾関 聡之, and 田浦 俊春
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1999, 65(1):67

57. Development and Prototyping of Aluminum Spaceframe Body [1999]

  • Shigeyuki Nakagawa and 中川 成幸
  • 日本機械学会誌 / Journal of the Society of Mechanical Engineers. 1999, 102(964):106

58. Extended Triangular Mesh Subdivision Methods and their Evaluation [1999]

  • Fumihiko KIMURA, Hiromasa SUZUKI, Takashi KANAI, Tetsuya YAMAMOTO, 山本 徹也, 木村 文彦, 金井 崇, and 鈴木 宏正
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1999, 65(3):386

59. Designing and Prototyping of Remote Safety Management System for Small Vessels : Concept and System Configuration [1999]

  • Makoto ENDO, Shunji NIIMURA, Tetsuya OTANI, Yutaka SHOKAKU, 大谷 哲也, 新村 俊二, 正角 豊, and 遠藤 真
  • 日本航海学会論文集 / The Journal of Japan Institute of Navigation. 1999, 100:153

60. Recent Progress of Rapid Prototyping Photo-Resin [1999]

  • Tsuneo HAGIWARA and 萩原 恒夫
  • 高分子 / Kobunshi. 1999, 48(8):598

61. 2ステップレーザ照射法による純鉄粉体材料を用いた3次元造形 [1999]

  • Toru YOSHIZAWA, Tsuyoshi TOKUNAGA, 吉澤 徹, and 徳永 剛
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1999, 65(8):1136

62. A Study on a Mechanical Vibration Assisted Plasma Etching (1st Report) Prototyping of a Basic Reactor and Evaluation of the Vibration Effects [1999]

  • Masanori HAYASE, Naoya WATANABE, Takeshi HATSUZAWA, 初澤 毅, 早瀬 仁則, and 渡辺 直哉
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1999, 65(9):1335

63. Fabrication of Realistic and Dynamic Human Head Phantoms [1999]

  • Daigo IMAI, Kenji TANAKA, Yukari TANIKAWA, and Yukio YAMADA
  • JSME International Journal Series C Mechanical Systems, Machine Elements and Manufacturing. 1999, 42(3):487

64. Research on Shape of Solidified Resin in Stereo-Lithography : Comparison with Measured and Estimated Shape of Solidified Resin [1999]

  • Shigeru NAGAMORI, Toru YOSHIZAWA, 吉澤 徹, and 永森 茂
  • 日本機械学会論文集 C編 / Transactions of the Japan Society of Mechanical Engineers Series C. 1999, 65(639):4558

65. Needs to Materials from Automobile Technology [2000]

  • Taketo Sakuma and 佐久間 健人
  • まてりあ / Materia Japan. 2000, 39(1):3

66. Rapid Manufacturing System by Sheet Steel Laminating Method [2000]

  • Jun SHINOZUKA, Masahiko YOSHINO, Toshiyuki OBIKAWA, 吉野 雅彦, 帯川 利之, and 篠塚 淳
  • 日本機械学会論文集 C編 / Transactions of the Japan Society of Mechanical Engineers Series C. 2000, 66(642):667

67. 417 Generation of Three-dimensional Micro Structures Using Metal Jet [2000]

  • Katsumi YAMAGUCHI, Masaaki YAMASAKI, Yasuo NATSUME, 夏目 康男, 山口 勝美, and 山崎 真明
  • The Proceedings of Conference of Tokai Branch. 2000, :215

68. Behavioral Research and Programmable Toy [2000]

  • Masayuki Inaba
  • Journal of the Robotics Society of Japan. 2000, 18(2):173

69. Prototyping of Epoxy/ceramic Photonic Crystals by Stereolithography [2000]

  • Kenji Kajiyama, Soshu Kirihara, and Yoshinari Miyamoto
  • Journal of the Japan Society of Powder and Powder Metallurgy. 2000, 47(3):239

70. 218 Evaluation of Polishing Ability for Grinding Stone Developed by Using Rapid Prototyping [2000]

  • Hiroki UMPO, Takeshi TANAKA, Yoshitada ISONO, 田中 武司, 磯野 吉正, and 雲宝 広貴
  • The Proceedings of Conference of Kansai Branch. 2000, 35

71. Development of Photofabrication Device by UV-Rays through Optical Fiber and its Application for Plaster Mold Casting [2000]

  • Kazuyoshi Hoshino, Nobutaka Watanabe, Toshikatsu Otani, and Yoshiaki Hidaka
  • Journal of Japan Foundry Engineering Society. 2000, 72(6):394

72. Theoretical Analysis and Experimental Evaluation on Solidified parts' Surplus Growth in Stereo-lithography [2000]

  • Akiya KAMIMURA, Naomasa NAKAJIMA, Tamotsu MURAKAMI, 中島 尚正, 村上 存, and 神村 明哉
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 2000, 66(7):1053

73. Clinical Applications of Stereolithography Surgical Applications in the Field of Plastic Surgery [2000]

  • Masahiro KOBAYASHI and Tatsuo NAKAJIMA
  • The Review of Laser Engineering. 2000, 28(7):416

74. Rapid Prototyping in Japan [2000]

  • Takeo NAKAGAWA
  • Journal of The Japan Society of Electrical Machining Engineers. 2000, 34(76):8

75. 3513 液晶を用いた非積層マイクロ光造形法の研究 [2000]

  • Satoru TAKAHASHI, Takashi MIYOSHI, Terutake HAYASHI, Yasuhiro TAKAYA, 三好 隆志, 林 照剛, 高橋 哲, and 高谷 裕浩
  • The proceedings of the JSME annual meeting. 2000, :507

76. 3517 小型工作機械の設計評価について [2000]

  • Hitoshi MAEKAWA, Kiwamu ASHIDA, Makoto TANAKA, Nozomu MISHIMA, Tamio TANIKAWA, 三島 望, 前川 仁, 田中 誠, 芦田 極, and 谷川 民生
  • The proceedings of the JSME annual meeting. 2000, :515

77. 3610 複数材料を用いたラピッド・プロトタイピングに関する研究 [2000]

  • Naofumi ABE, Naomasa NAKAJIMA, Tamotsu MURAKAMI, Yasumasa UTAMURA, 中島 尚正, 宇多村 保政, 村上 存, and 阿部 直文
  • The proceedings of the JSME annual meeting. 2000, :553

78. 3809 微小ガスタービンの設計およびそのコンプレッサ部の試作 [2000]

  • Kazuomi TAKAHASHI, Masayuki NAKAO, Yotaro HATAMURA, 中尾 政之, 畑村 洋太郎, and 高橋 一臣
  • The proceedings of the JSME annual meeting. 2000, :575

79. 3631 性質分布を有するラピッド・プロトタイピングのソフトウェアに関する研究 [2000]

  • Naomasa NAKAJIMA, Tamotsu MURAKAMI, Yudong CHEN, 中島 尚正, 村上 存, and 陳 毓東
  • The proceedings of the JSME annual meeting. 2000, :595

80. 713 Laser Sintering Characteristics of Resin Coated Stainless Steel Powder [2000]

  • Liew Loy Seng, 前川 克廣, 山口 幸男, and 片寄 学
  • The Proceedings of Ibaraki District Conference. 2000, :205

81. 714 Die Fabrication Using Selective Laser Sintering [2000]

  • Katsuhiro MAEKAWA, Masahiro UMEDA, Shinichi IIDA, Tomoya SUZUKI, 前川 克廣, 梅田 真宏, 鈴木 友也, and 飯田 伸一
  • The Proceedings of Ibaraki District Conference. 2000, :207

82. A Functional CMOS Image Sensor with Non-Destructive Intermediate Imaging Mode for Low-Power Motion Vector Estimation [2000]

  • Akira MATSUZAWA, Dwi HANDOKO, Shoji KAWAHITO, Yoshiaki TADOKORO, ハンドコ ドゥイ, 川人 祥二, 松澤 昭, and 田所 嘉昭
  • ITE Technical Report. 2000, :15

83. Research on Refrigerative Stereolithography : Accurate Fabrication with High Degree of Freedom by Sol-Gel Transformable Resin and UV-Blocking Layer [2000]

  • Akiya KAMIMURA, Naomasa NAKAJIMA, Tamotsu MURAKAMI, 中島 尚正, 村上 存, and 神村 明哉
  • 日本機械学会論文集 C編 / Transactions of the Japan Society of Mechanical Engineers Series C. 2000, 66(649):3201

84. 505 Case studies of developed industrial products by laser lithography [2000]

  • Masamitsu HORIUCHI and 堀内 正光
  • The Proceedings of Yamanashi District Conference. 2000, :133

85. 113 三次元血管実形状測定システムを用いた計算流体力学シミュレーション [2000]

  • Takami YAMAGUCHI, Yusuke KIMURA, 山口 隆美, and 木村 祐介
  • Proceedings of the JSME Bioengineering Conference and Seminar. 2000, :25

86. The 3-dimensional transmission of two dimensions CT data : ndustrialization and clinical application, that utility and possibility [2000]

  • Kazuo Kawasaki, Nobuhiko Tanaka, Yoshito Ogata, 尾方 義人, 川崎 和男, and 田中 信彦
  • PROCEEDINGS OF THE ANNUAL CONFERENCE OF JSSD. 2000, :288

87. Design of a Video Interface Controller for Color Sequential Liquid-Crystal-on-Silicon Microdisplay [2000]

  • H.C. Huang, H.S. Kwok, J.Y. Lin, P.W. Cheng, S.C. Tan, and X.W. Sun
  • ITE Technical Report. 2000, :47

88. The Direct Croning Process and Casting Simulation. [2000]

  • Yasuhiro OKAZAKI and 岡崎 康弘
  • The Proceedings of the Materials and processing conference. 2000, :27

89. Highly Flexible OLED using with Printing Method [2001]

  • Daigo Aoki, Mariko Gotou, Norikatsu Nakamura, Toru Miyake, Toshitaka Mori, Yoshihiro Kobayashi, 三宅 徹, 中村 全克, 小林 義弘, 後藤 真理子, 森 利隆, and 青木 大吾
  • Abstracts of The Japanese Society of Printing Science and Technology's Spring and Fall Conferences. 2001, :15

90. Method for Simple Extraction of Paralinguistic Features in Human Face [2001]

  • Martin JOHANSSON, Shuichi FUKUDA, and Vlaho KOSTOV
  • The Journal of the Institute of Image Electronics Engineers of Japan. 2001, 30(2):111

91. Fabrication of Metallic Porous Media by Semisolid Processing Using Laser Irradiation [2001]

  • Hideaki Kaziura, Hideyuki Yasuda, Itsuo Ohnaka, and Yoshihiko Nishiwaki
  • MATERIALS TRANSACTIONS. 2001, 42(2):309

92. Product Development by Design Navigation Method [2001]

  • Hiromu NAKAZAWA
  • JSME International Journal Series C Mechanical Systems, Machine Elements and Manufacturing. 2001, 44(3):848

93. 220 三次元血管実形状モデリングシステムを用いた計算流体力学シミュレーション [2001]

  • Daisuke UJIHARA, Takami YAMAGUCHI, Yusuke KIMURA, 山口 隆美, 木村 祐介, and 氏原 大介
  • The Proceedings of the Bioengineering Conference Annual Meeting of BED/JSME. 2001, :74

94. 1120 ゾルゲル変換樹脂と直接マスク法を用いた冷却固化式光造形法 [2001]

  • Akiya KAMIMURA, Naomasa NAKAJIMA, Tamotsu MURAKAMI, 中島 尚正, 村上 存, and 神村 明哉
  • The Proceedings of Design & Systems Conference. 2001, :35

95. 1121 3 次元 CAD 教育へのラピッド・プロトタイピングの導入 [2001]

  • Kazuhiro OIKAWA, Naomasa NAKAJIMA, Tamotsu MURAKAMI, 中島 尚正, 及川 和広, and 村上 存
  • The Proceedings of Design & Systems Conference. 2001, :39

96. Current Status of Rapid Prototyping Technology [2001]

  • Hiroyuki NARAHARA and 楢原 弘之
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 2001, 67(3):403

97. 312 Development of Driving Simulator with Full Vehicle Model of Multibody Dynamics [2001]

  • Taichi SHIIBA, Yoshihiro SUDA, 椎葉 太一, and 須田 義大
  • The Proceedings of Conference of Kanto Branch. 2001, :95

98. Non-Scanning Rapid Prototyping System using a Digital Micromirror Device [2001]

  • Kohro Takahashi and Takashi Akahane
  • IEEJ Transactions on Sensors and Micromachines. 2001, 121(5):275

99. Recent Trend about the Metal Rapid Prototyping using Powder [2001]

  • Masato Imamura
  • Journal of the Japan Society of Powder and Powder Metallurgy. 2001, 48(5):415

100. 2P1-N4 Design and Prototyping of High Speed Target Tracking Vision Chip [2001]

  • A. Yoshida, I. Ishii, M. Ishikawa, T. Komuro, 吉田 淳, 小室 孝, 石井 抱, and 石川 正俊
  • The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec). 2001, :65

Catalog

Books, media, physical & digital resources
See catalog results
Catalog results include