articles+ search results

23 articles+ results

1 - 20
View results as:
Number of results to display per page

1. Study of a Forging Type Rapid Prototyping System (Servo Controlled Linear Shaft Motor Applied for Hammering System) [2012]

  • Hidetake TANAKA, Naoki ASAKAWA, Soichiro NAKA, Yuta KONDO, 中 宗一郎, 浅川 直紀, 田中 秀岳, and 近藤 祐太
  • 日本機械学会論文集Ｃ編 / TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C. 2012, 78(790):2312

2. Study on Product Design Framework for Enhancing Interaction of Model-Based Development and Prototyping [2013]

  • Kikuo FUJITA, Masashi MIZUTA, Masaya HIROOKA, Yutaka NOMAGUCHI, 廣岡 正也, 水田 将史, 藤田 喜久雄, and 野間口 大
  • 日本機械学会論文集Ｃ編 / TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C. 2013, 79(807):4061

3. Development of a Forging Type Rapid Prototyping System Phenomenon in Metal Hammering on the Basis of CAD Data [2005]

  • Hidetake TANAKA, Masatoshi HIRAD, Naoki ASAKAWA, Toshihiko SHINTANI, 平尾 政利, 新谷 俊彦, 浅川 直紀, and 田中 秀岳
  • 日本機械学会論文集 C編 / Transactions of the Japan Society of Mechanical Engineers Series C. 2005, 71(711):3320

4. Fabrication of Micro Fluidic Chip with Micro-Injection Port by Ink-Jet Rapid Prototyping Method and Its Evaluation [2005]

  • Fumihito ARAI, Kazutoshi MAEDA, Toshio FUKUDA, 前田 憲利, 新井 史人, and 福田 敏男
  • 日本機械学会論文集 C編 / Transactions of the Japan Society of Mechanical Engineers Series C. 2005, 71(701):100

5. Scanning Probe for Coordinate Measurement Using a Translational Parallel Mechanism (Prototyping of the Isotropic Mechanism and Calibration of the Mechanical Parameters) [2012]

  • Ke DONG, Kenta KANAMARU, Takashi HARADA, 原田 孝, 董 科, and 金丸 健太
  • 日本機械学会論文集Ｃ編 / TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C. 2012, 78(787):826

6. Strength of Manufactured Object Made by Direct Metal Lamination Using Arc Discharge [2013]

  • Hiroyuki SASAHARA, Keizo TANAKA, Reo YOSHIMARU, Takeyuki ABE, 吉丸 玲欧, 田中 敬三, 笹原 弘之, and 阿部 壮志
  • 日本機械学会論文集Ｃ編 / TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C. 2013, 79(800):1168

7. On the Mechanism of the Hot Wire Cutting of Polystyrene Foam Cutting Characteristics of the Dwelling Wire [2006]

  • Tomohisa TANAKA, Yoshio SAITO, 田中 智久, and 齋藤 義夫
  • 日本機械学会論文集 C編 / Transactions of the Japan Society of Mechanical Engineers Series C. 2006, 72(722):3383

8. Vehicle Dynamics Analysis Using Parallel Loop Simulation : Development of Simulation Method Which Refuses Circulation of the Integrated Value of Tire Force Error [2003]

  • Etsuo KATSUYAMA, Naoto FUKUSHIMA, 勝山 悦生, and 福島 直人
  • 日本機械学会論文集 C編 / Transactions of the Japan Society of Mechanical Engineers Series C. 2003, 69(684):2120

9. Rapid Manufacturing System by Sheet Steel Laminating Method [2000]

  • Jun SHINOZUKA, Masahiko YOSHINO, Toshiyuki OBIKAWA, 吉野 雅彦, 帯川 利之, and 篠塚 淳
  • 日本機械学会論文集 C編 / Transactions of the Japan Society of Mechanical Engineers Series C. 2000, 66(642):667

10. Research on Refrigerative Stereo-Lithography [1997]

  • Akiya KAMIMURA, Atsushi KAZAMA, Naomasa NAKAJIMA, Tamotsu MURAKAMI, 中島 尚正, 村上 存, 神村 明哉, and 風間 敦
  • 日本機械学会論文集 C編 / Transactions of the Japan Society of Mechanical Engineers Series C. 1997, 63(606):605

11. Stereolithography Using Direct-Mask Area Exposure Positive Direct-Mask Area Exposure Using Photo-Initiator as Mask [2005]

  • Kazuhisa TAKUMI, Taku YADA, Tamotsu MURAKAMI, 宅見 和久, 村上 存, and 矢田 拓
  • 日本機械学会論文集 C編 / Transactions of the Japan Society of Mechanical Engineers Series C. 2005, 71(711):3314

12. Graphical Language for Problem Solving [2007]

  • Takeshi KISHINAMI and 岸浪 建史
  • 日本機械学会論文集 C編 / Transactions of the Japan Society of Mechanical Engineers Series C. 2007, 73(735):2873

13. Stereolithography Mock-up with Internal Camera for Interface Simulation and Usability Data Acquisition [2007]

  • Michiki NAKANO, Tamotsu MURAKAMI, 中野 道樹, and 村上 存
  • 日本機械学会論文集 C編 / Transactions of the Japan Society of Mechanical Engineers Series C. 2007, 73(727):927

14. Research on Shape of Solidified Resin in Stereo-Lithography : Comparison with Measured and Estimated Shape of Solidified Resin [1999]

  • Shigeru NAGAMORI, Toru YOSHIZAWA, 吉澤 徹, and 永森 茂
  • 日本機械学会論文集 C編 / Transactions of the Japan Society of Mechanical Engineers Series C. 1999, 65(639):4558

15. Research on Solidification of Photo-Curing Resin in Stereo-Lithography : Effect of Resin Properties on Curing of Resin and Dimensional Estimation of Cured Resin [2002]

  • Shigeru NAGAMORI, Toru YOSHIZAWA, 吉澤 徹, and 永森 茂
  • 日本機械学会論文集 C編 / Transactions of the Japan Society of Mechanical Engineers Series C. 2002, 68(667):1021

16. Research on Refrigerative Stereolithography : Accurate Fabrication with High Degree of Freedom by Sol-Gel Transformable Resin and UV-Blocking Layer [2000]

  • Akiya KAMIMURA, Naomasa NAKAJIMA, Tamotsu MURAKAMI, 中島 尚正, 村上 存, and 神村 明哉
  • 日本機械学会論文集 C編 / Transactions of the Japan Society of Mechanical Engineers Series C. 2000, 66(649):3201

17. Design Method and Lifecycle Management for Cloud-Compliant Web Services [2013]

  • Fumiya AKASAKA, Koji KIMITA, Shigeru HOSONO, Yoshiki SHIMOMURA, 下村 芳樹, 木見田 康治, 細野 繁, and 赤坂 文弥
  • 日本機械学会論文集Ｃ編 / TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C. 2013, 79(808):5029

18. A Study on Multi DOF Magnetic Scale for Motion Control Compensation of Machine Tool [2013]

  • Kazuo YAMAZAKI, Shigeaki MARUYAMA, Tojiro AOYAMA, Toru FUJIMORI, 丸山 重明, 山崎 和雄, 藤森 徹, and 青山 藤詞郎
  • 日本機械学会論文集Ｃ編 / TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C. 2013, 79(806):3993

19. Analysis and Evaluation of Support for Tailor-Made Multilayer Piezoelectric Actuator [2008]

  • Fumihito ARAI, Masahiro NAKAJIMA, Naoya TODA, Toshio FUKUDA, 中島 正博, 当田 直哉, 新井 史人, and 福田 敏男
  • 日本機械学会論文集 C編 / Transactions of the Japan Society of Mechanical Engineers Series C. 2008, 74(747):2778

20. Underactuated Five-Finger Prosthetic Hand Inspired by Grasping Force Distribution of Humans [2008]

  • Takashi MAENO, Yasuhisa KAMIKAWA, 前野 隆司, and 神川 康久
  • 日本機械学会論文集 C編 / Transactions of the Japan Society of Mechanical Engineers Series C. 2008, 74(746):2542

Catalog

Books, media, physical & digital resources
See catalog results
Catalog results include