articles+ search results

43 articles+ results

1 - 20
View results as:
Number of results to display per page

1. An Automatic Shape Modification using Surface Constraints in CSG [1990]

  • Shinji TOKUMASU, Tomotoshi ISHIDA, Yasumasa KAWASHIMA, 川島 泰正, 徳増 真司, and 石田 智利
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1990, 56(4):703

2. Laser-fabrication Technology for Solid Objects [1992]

  • Masanobu YAMAMOTO and 山本 眞伸
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1992, 58(3):435

3. Shape Analysis of Solidified Photopolymer for the Three Dimensional Photofabrication Measurement of Critical Exposure [1993]

  • Hiroyuki NARAHARA, Katsumasa SAITO, 斎藤 勝政, and 楢原 弘之
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1993, 59(9):1477

4. Study on the Solidified Depth Parameters Capable of Quantitative Comparison of Photopolymers for Three Dimensional Photofabrication [1993]

  • Hiroyuki NARAILARA, Katsumasa SAITO, 斎藤 勝政, and 楢原 弘之
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1993, 59(11):1803

5. Theoretical Analysis of Laser Optics for the Rapid Prototyping [1994]

  • Hiroyuki NARAHARA, Katsumasa SAITO, 斎藤 勝政, and 楢原 弘之
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1994, 60(7):994

6. Optical System Analysis of the Rapid Prototyping Identification of the Laser Power Density Distribution [1994]

  • Hiroyuki NARAIIARA, Katsumasa SAITO, 斎藤 勝政, and 楢原 弘之
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1994, 60(8):1117

7. Studies on Solid Formation Mechanism of Three Dimensional Photofabrication (1st Report) Investigation of Solidified Unit Shape [1995]

  • Hiroyuki NARAHARA, Katsumasa SAITO, Satoru IGARASHI, Shinichi KOJIMA, 五十嵐 悟, 小島 真一, 斎藤 勝政, and 楢原 弘之
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1995, 61(1):117

8. Study on the Improvement of Surface Roughness of Complex Model Created by Three Dimensional Photofabrication (1st Report) Proposal of Lift up Irradiation Method [1995]

  • Hiroyuki NARAHARA, Katsumasa SAITO, 斎藤 勝政, and 楢原 弘之
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1995, 61(2):233

9. Laser Lithography for Making Jewelry (1st Report) An Idea of Diagonal Irradiation [1996]

  • Hiroshi MAKINO, Noriaki KIYOHIRO, Shigeru HAGIHARA, Susumu FURUKAWA, 古川 進, 清弘 智昭, 牧野 洋, and 萩原 茂
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1996, 62(11):1587

10. 3D Profile Generation by Dot-Matrix EDM (1st Report) Proposal of Dot-Matrix EDM [1997]

  • Katsushi FURUTANI, Naotake MOHRI, Toshio ENAMI, 古谷 克司, 毛利 尚武, and 江南 俊夫
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1997, 63(2):254

11. Laser Lithography for Making Jewels (2nd Report) An Algorithm of Diagonal Irradiation Method [1997]

  • Hiroshi MAKINO, Noriaki KIYOHIRO, Shigeru HAGIHARA, Susumu FURUKAWA, 古川 進, 清弘 智昭, 牧野 洋, and 萩原 茂
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1997, 63(5):652

12. Die & Mold and Rapid Prototyping [1997]

  • Hiroyuki NARAHARA and 楢原 弘之
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1997, 63(9):1236

13. Generation of Three-dimensional Structure Using Metal Jet [1998]

  • Katsuhiko SAKAI, Katsumi YAMAGUCHI, Takao HIRAYAMA, Takashi YAMANAKA, 山中 隆, 山口 勝美, 平山 孝雄, and 酒井 克彦
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1998, 64(10):1497

14. Shelling Operation for Triangular Mesh by Vertex Offsetting [1998]

  • Fumihiko KIMURA, Hiromasa SUZUKI, Takashi KANAI, Yusuke SAKURAI, 木村 文彦, 桜井 勇亮, 金井 崇, and 鈴木 宏正
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1998, 64(6):835

15. Rapid Prototyping by Free Sintering Method (1st Report) Fundamental Study [1998]

  • Hiromu NAKAZAWA, Mitsuo ISHIKAWA, Yusuke MATSUMOTO, 中沢 弘, 松本 祐介, and 石川 光男
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1998, 64(7):1078

16. Laser Micro Fabrication Using Green Tape [1998]

  • Ikuya OHSHIMA, Katsuhiro MAEKAWA, Satoshi KOKURA, Yuichi YOKOYAMA, 前川 克廣, 大島 郁也, 小倉 慧, and 横山 雄一
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1998, 64(9):1340

17. A Study of Design Environment for Behavioral Prototyping [1999]

  • Satoshi OZEKI, Toshiharu TAURA, 尾関 聡之, and 田浦 俊春
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1999, 65(1):67

18. Extended Triangular Mesh Subdivision Methods and their Evaluation [1999]

  • Fumihiko KIMURA, Hiromasa SUZUKI, Takashi KANAI, Tetsuya YAMAMOTO, 山本 徹也, 木村 文彦, 金井 崇, and 鈴木 宏正
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1999, 65(3):386

19. 2ステップレーザ照射法による純鉄粉体材料を用いた3次元造形 [1999]

  • Toru YOSHIZAWA, Tsuyoshi TOKUNAGA, 吉澤 徹, and 徳永 剛
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1999, 65(8):1136

20. A Study on a Mechanical Vibration Assisted Plasma Etching (1st Report) Prototyping of a Basic Reactor and Evaluation of the Vibration Effects [1999]

  • Masanori HAYASE, Naoya WATANABE, Takeshi HATSUZAWA, 初澤 毅, 早瀬 仁則, and 渡辺 直哉
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1999, 65(9):1335

Catalog

Books, media, physical & digital resources
See catalog results
Catalog results include