articles+ search results

13 articles+ results

1 - 13
View results as:
Number of results to display per page

1. Study of a Forging Type Rapid Prototyping System (Servo Controlled Linear Shaft Motor Applied for Hammering System) [2012]

  • Hidetake TANAKA, Naoki ASAKAWA, Soichiro NAKA, Yuta KONDO, 中 宗一郎, 浅川 直紀, 田中 秀岳, and 近藤 祐太
  • 日本機械学会論文集Ｃ編 / TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C. 2012, 78(790):2312

2. Development of Forging Rapid Prototyping System Path Generation for Incremental Hammering Using an Industrial Robot [2011]

  • Hidetake Tanaka, Keigo Takasugi, Mami Jono, Naoki Asakawa, 城野 麻美, 浅川 直紀, 田中 秀岳, and 高杉 敬吾
  • Proceedings of JSPE Semestrial Meeting. 2011, :333

3. Development of a Forging Type Rapid Prototyping System : Tool Posture Control to Improve the Forming Property(Digital design and digital manufacturing) [2005]

  • Hidetake TANAKA, Masatoshi HIRAO, Naoki ASAKAWA, and Toshihiko SHINTANI
  • Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21. 2005, :51

4. Development of a Forging Type Rapid Prototyping System Phenomenon in Metal Hammering on the Basis of CAD Data [2005]

  • Hidetake TANAKA, Masatoshi HIRAD, Naoki ASAKAWA, Toshihiko SHINTANI, 平尾 政利, 新谷 俊彦, 浅川 直紀, and 田中 秀岳
  • 日本機械学会論文集 C編 / Transactions of the Japan Society of Mechanical Engineers Series C. 2005, 71(711):3320

5. 3406 Development of High Efficiency Turbine of High-performance Micro Water-power Generation [2012]

  • Kazuhiko SUGA, Masaaki SHIBATA, Naoki SATONAKA, Soramichi OKADA, Tadayuki KAMIMURA, Tokuichi FUJIWARA, 上村 匡敬, 岡田 空海地, 柴田 政明, 藤原 徳一, 里中 直樹, and 須賀 一彦
  • The Proceedings of Design & Systems Conference. 2012, 1

6. S2001-2-3 Education in Computer-aided Fabrication at School of Oral Health Sciences [2009]

  • Hiroki NIKAWA, Kazuko KAWAHARA, Kisako SASAHARA, Mitsuhiro TAMAMOTO, Saiji SHIMOE, Seicyo MAKIHIRA, Takahiro SATODA, Takeshi MURAYAMA, 下江 宰司, 二川 浩樹, 村山 長, 河原 和子, 牧平 清超, 玉本 光弘, 笹原 妃佐子, and 里田 隆博
  • The proceedings of the JSME annual meeting. 2009, :321

7. Processing of foamed polystyrene models using a hot wire tool [2009]

  • Dai WAKISAKA, Junji SHIBATA, Tadahiro UEKI, Tetsuo FUJIMOTO, 柴田 順二, 植木 忠博, 脇坂 大, and 藤本 哲男
  • 砥粒加工学会誌 / Journal of the Japan Society for Abrasive Technology. 2009, 53(10):615

8. J0207-2-2 Training System for Arthroscopic Surgery [2010]

  • Akihisa KUBOTA, Hidehiko HIGAKI, Hiromasa MIURA, Kousuke KATAYAMA, Mutsumi TOUGE, Taketoshi MARUI, Takuya NISHIMURA, Yasutaka TASHIRO, Yoshitaka NAKANISHI, 三浦 裕正, 中西 義孝, 久保田 章亀, 圓井 健敏, 峠 睦, 日垣 秀彦, 片山 耕介, 田代 泰隆, and 西村 拓哉
  • The proceedings of the JSME annual meeting. 2010, :241

9. 505 Case studies of developed industrial products by laser lithography [2000]

  • Masamitsu HORIUCHI and 堀内 正光
  • The Proceedings of Yamanashi District Conference. 2000, :133

10. Latest Manufacturing Technology of Cast Steel [2004]

  • Akira Yoshizawa, Tomomi Souda, 吉沢 亮, and 早田 智巳
  • 鋳造工学 / Journal of Japan Foundry Engineering Society. 2004, 76(12):979

11. Application of Short-term Development and Prototype Manufacturing System for Casting Products [2007]

  • Akira Yoshizawa, Kenji Itoh, Masanori Hara, 伊藤 賢児, 原 雅徳, and 吉沢 亮
  • 鋳造工学 / Journal of Japan Foundry Engineering Society. 2007, 79(7):391

12. S142023 Study on Development of CAM System for Laser Forming ; Characteristics of Laser Forming Based on Experiments and FEM Analysis [2011]

  • Akihiko USHIMARU, Hideki AOYAMA, Naohisa MATSUSHITA, Toshihiko NAKAMURA, 中村 俊彦, 松下 直久, 牛丸 明彦, and 青山 英樹
  • The Proceedings of Mechanical Engineering Congress, Japan. 2011, 1

13. 102 Basic Study on Development of Laser Forming CAM System [2010]

  • Akihiko USHIMARU, Hideki AOYAMA, Naohisa MATSUSHITA, Shotaro ISHIHARA, Toshihiko NAKAMURA, 中村 俊彦, 松下 直久, 牛丸 明彦, 石原 将太郎, and 青山 英樹
  • The Proceedings of Manufacturing Systems Division Conference. 2010, :23

Catalog

Books, media, physical & digital resources
See catalog results
Catalog results include