articles+ search results

1,211 articles+ results

1 - 20
View results as:
Number of results to display per page

1. Development and Practical Utility Assessment of a Remote Monitoring System for Greenhouses Using Internet of Things Prototyping Kits [2019]

  • Akihisa Nonaka, Genta Kanai, Yoshimichi Yamashita, 山下 善道, 野中 章久, and 金井 源太
  • 農業情報研究 / Agricultural Information Research. 2019, 28(3):97

2. Development of a Data Utilization Skill Development Program —Development of Prototyping Support Environment for Data Utilization Services, and Its Practical Use— [2020]

  • Koichiro Yonemaru, Kyosuke Takahashi, Naka Gotoda, Naoto Hikawa, Rihito Yaegashi, Takayuki Kunieda, Yusuke Kometani, 八重樫 理人, 國枝 孝之, 後藤田 中, 樋川 直人, 米丸 浩一郎, 米谷 雄介, and 高橋 亨輔
  • 教育システム情報学会誌 / Transactions of Japanese Society for Information and Systems in Education. 2020, 37(2):131

3. A ZigBee/Wi-Fi Cooperative Channel Control Method and Its Prototyping [2020]

  • Hideki TODE, Kazuhiko KINOSHITA, Shu NISHIKORI, Takashi WATANABE, and Yosuke TANIGAWA
  • IEICE Transactions on Communications. 2020, E103.B(3):181

4. Future Prototyping Methodology for Knowledge Co-creation [2019]

  • Hideaki TAKEDA, Hisashi MASUDA, Kunio SHIRAHADA, MIWA NISHINAKA, Yusuke KISHITA, 増田 央, 木下 裕介, 武田 英明, 白肌 邦生, and 西中 美和
  • Proceedings of the Annual Conference of JSAI. 2019, :2

5. Prototyping for Clarifying experience of news [2019]

  • Hiroyuki Fujishiro, Masaaki Nonoyama, Shingo Dobashi, 土橋 臣吾, 藤代 裕之, and 野々山 正章
  • PROCEEDINGS OF THE ANNUAL CONFERENCE OF JSSD. 2019, :398

6. Welding method of polyimide films without molds and prototyping of balloon actuator [2020]

  • Daisuke Yamaguchi, Masaya Takasaki, Takeshi Mizuno, Yosuke Kato, Yuji Ishino, 加藤 陽祐, 山口 大介, 水野 毅, 石野 裕二, and 髙﨑 正也
  • Proceedings of JSPE Semestrial Meeting. 2020, :300

7. Importance of Prototyping by Remote Communication [2020]

  • Yasunori Sannomiya, Yasushi Harada, 三野宮 定里, and 原田 泰
  • PROCEEDINGS OF THE ANNUAL CONFERENCE OF JSSD. 2020, :32

8. Prototyping of Ingestible Core-Body Temperature Sensor Charged by Gastric Acid Power Generation [2020]

  • Hiroshi Miyaguchi, Shinya Yoshida, Tsutomu Nakamura, 中村 力, 吉田 慎哉, and 宮口 裕
  • 生体医工学 / Transactions of Japanese Society for Medical and Biological Engineering. 2020, Annual58(Abstract):418

9. A new framework for design and validation of complex heat transfer surfaces based on adjoint optimization and rapid prototyping technologies [2020]

  • Takayuki OSAWA, Yosuke HASEGAWA, Yukinori KAMETANI, and Yutaka FUKUDA
  • Journal of Thermal Science and Technology. 2020, 15(2):0016

10. Robot Prototyping through Dialogue and Verification with Users using Independent Crawler Unit. [2020]

  • Hiroshi SHIMURA, Ryota YAMASHINA, 山科 亮太, and 志村 浩
  • The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec). 2020, :1-B13

11. Prototyping of musculoskeletal robot based on anatomy of neck of giraffes and performance test [2020]

  • Atsuhiko Niikura, Gen Endo, Hiroyuki Nabae, Kent Mori, Koichi Suzumori, Megu Gunji, Ryuma Niiyama, 新倉 敦彦, 新山 龍馬, 森 健人, 遠藤 玄, 郡司 芽久, 鈴森 康一, and 難波江 裕之
  • The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec). 2020, :1-L03

12. Omnidirectional mechanism from the viewpoint of axial direction drive - Prototyping of the Ciliated Wheel Mechanism and the Vehicle Mechanism with Cross-Helical Gear - [2020]

  • Eri TAKANE, Issei ONDA, Kenjiro TADAKUMA, Masahiro WATANABE, Masashi KONYO, Riichiro TADAKUMA, Satoshi TADOKORO, Tomoya TAKAHASHI, Tori SHIMIZU, Yu OZAWA, 多田隈 建二郎, 多田隈 理一郎, 小澤 悠, 恩田 一生, 昆陽 雅司, 清水 杜織, 渡辺 将広, 田所 諭, 高橋 知也, and 髙根 英里
  • The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec). 2020, :1-H14

13. Development of a center-of-gravity movement device using differential screw driving mechanism for glider type small underwater robots -Prototyping and evaluation of backlash removal mechanism- [2020]

  • Akira SEINO, Hayato IWATA, Takayuki TAKAHASHI, 岩田 逸人, 情野 瑛, and 高橋 隆行
  • The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec). 2020, :1-B05

14. A Prototyping of Penile Tumescence Continuous Observation Device [2020]

  • Seiji Matsumoto and Yasuhito Takeuchi
  • Advanced Biomedical Engineering. 2020, 9:167

15. Consideration and prototyping of knowledge base for problem solving in elderly care services [2020]

  • Chiaki OSHIYAMA, Satoshi NISHIMURA, Yuichi OOTA, 太田 祐一, 押山 千秋, and 西村 悟史
  • Proceedings of the Annual Conference of JSAI. 2020, :4

16. Prototyping of Electronic Musical Instrument 'Photomin' as Physical Programming Learning Material for STEAM Education [2020]

  • Naohito KIMURA and 木村 尚仁
  • 工学教育 / Journal of JSEE. 2020, 68(2):2-72

17. DisplayBowl: 半透過凹型半球面ディスプレイの試作と評価 [2020]

  • Hideki KOIKE, Shio MIYAFUJI, Soichiro TOYOHARA, Toshiki SATO, 佐藤 俊樹, 宮藤 詩緒, 小池 英樹, and 豊原 宗一郎
  • コンピュータ ソフトウェア / Computer Software. 2020, 37(1):1-114

18. Study on production management method in high-mix low-volume production mainly on prototyping [2019]

  • Akira Tsumaya, Yudai Nakamura, 中村 雄大, and 妻屋 彰
  • Proceedings of JSPE Semestrial Meeting. 2019, :226

19. Prototyping of Tactile display technology using MEMS technology-2 [2018]

  • Junji Sone, Katsuhiko Ooizumi, Yasuyoshi Matsumoto, Yoich Hoshi, Yoji Yasuda, 大泉 勝彦, 安田 洋司, 星 陽一, 曽根 順治, and 松本 康義
  • The Proceedings of the Symposium on Micro-Nano Science and Technology. 2018, :31

20. Designing of Prototyping laboratory Design process in 'softdevice Lab.' [2018]

  • Masaaki Nonoyama and 野々山 正章
  • PROCEEDINGS OF THE ANNUAL CONFERENCE OF JSSD. 2018, :278

Catalog

Books, media, physical & digital resources
See catalog results

Guides

Course- and topic-based guides to collections, tools, and services.
Search ""Prototyping"" in all guide pages