articles+ search results

1,300 articles+ results

1 - 50
View results as:
Number of results to display per page

1. 교수체제설계를 위한 래피드 프로토타입(RPISD) 모형 적용 및 개선에 관한 연구 [2020]

  • 임철일 ( Cheolil Lim ), 송유경 ( Yukyeong Song ), 홍수민 ( Sumin Hong ), and 박찬실 ( Chansil Park)
  • 교육공학연구. Vol. 36 No. 3 (2020) pg. 589, 29 p.

2. A Product Design Process for Innovation based on Iterative Agile Prototyping [2019]

  • 김유빈 ( Youbin Kim ) and 이재환 ( Jaehwan Lee)
  • 산업디자인학연구. Vol. 13 No. 2 (2019) pg. 61, 9 p.

3. 안전한 정신질환자 치유환경에 대한 정신건강전문가의 인식 유형 [2020]

  • 주익현 ( Ik Hyun Joo ), 임은정 ( Yen Jung Lim ), and 이명수 ( Myung Soo Lee)
  • 주관성 연구. Vol. 52 (2020) pg. 27, 20 p.

4. 청소년의 복지체제 선호에 따른 복지인식 유형화 [2019]

  • 김상미 ( Sang Mi Kim ), 고진희 ( Jin Hee Koh ), 문정순 ( Jeong Soon Moon ), and 양기훈 ( Gi Hoon Yang)
  • 주관성 연구. Vol. 47 (2019) pg. 29, 20 p.

5. Development and Practical Utility Assessment of a Remote Monitoring System for Greenhouses Using Internet of Things Prototyping Kits [2019]

  • Akihisa Nonaka, Genta Kanai, Yoshimichi Yamashita, 山下 善道, 野中 章久, and 金井 源太
  • 農業情報研究 / Agricultural Information Research. 2019, 28(3):97

6. Rapid Prototyping Instructional Systems Development에 근거한 국군간호사관학교의 군 간호학 교육체계 개발 [2018]

  • 조순영 ( Joe Seun-young ), 김혜원 ( Kim Hyewon ), 전윤경 ( Jeon Yungyong ), and 정은영 ( Jung Eun-young)
  • 군진간호연구. Vol. 36 No. 1 (2018) pg. 1, 21 p.

7. Development of a Data Utilization Skill Development Program —Development of Prototyping Support Environment for Data Utilization Services, and Its Practical Use— [2020]

  • Koichiro Yonemaru, Kyosuke Takahashi, Naka Gotoda, Naoto Hikawa, Rihito Yaegashi, Takayuki Kunieda, Yusuke Kometani, 八重樫 理人, 國枝 孝之, 後藤田 中, 樋川 直人, 米丸 浩一郎, 米谷 雄介, and 高橋 亨輔
  • 教育システム情報学会誌 / Transactions of Japanese Society for Information and Systems in Education. 2020, 37(2):131

8. Future Prototyping Methodology for Knowledge Co-creation [2019]

  • Hideaki TAKEDA, Hisashi MASUDA, Kunio SHIRAHADA, MIWA NISHINAKA, Yusuke KISHITA, 増田 央, 木下 裕介, 武田 英明, 白肌 邦生, and 西中 美和
  • Proceedings of the Annual Conference of JSAI. 2019, :2

9. Prototyping for Clarifying experience of news [2019]

  • Hiroyuki Fujishiro, Masaaki Nonoyama, Shingo Dobashi, 土橋 臣吾, 藤代 裕之, and 野々山 正章
  • PROCEEDINGS OF THE ANNUAL CONFERENCE OF JSSD. 2019, :398

10. Importance of Prototyping by Remote Communication [2020]

  • Yasunori Sannomiya, Yasushi Harada, 三野宮 定里, and 原田 泰
  • PROCEEDINGS OF THE ANNUAL CONFERENCE OF JSSD. 2020, :32

11. Prototyping of Ingestible Core-Body Temperature Sensor Charged by Gastric Acid Power Generation [2020]

  • Hiroshi Miyaguchi, Shinya Yoshida, Tsutomu Nakamura, 中村 力, 吉田 慎哉, and 宮口 裕
  • 生体医工学 / Transactions of Japanese Society for Medical and Biological Engineering. 2020, Annual58(Abstract):418

12. A new framework for design and validation of complex heat transfer surfaces based on adjoint optimization and rapid prototyping technologies [2020]

  • Takayuki OSAWA, Yosuke HASEGAWA, Yukinori KAMETANI, and Yutaka FUKUDA
  • Journal of Thermal Science and Technology. 2020, 15(2):0016

13. A ZigBee/Wi-Fi Cooperative Channel Control Method and Its Prototyping [2020]

  • Hideki TODE, Kazuhiko KINOSHITA, Shu NISHIKORI, Takashi WATANABE, and Yosuke TANIGAWA
  • IEICE Transactions on Communications. 2020, E103.B(3):181

14. Robot Prototyping through Dialogue and Verification with Users using Independent Crawler Unit. [2020]

  • Hiroshi SHIMURA, Ryota YAMASHINA, 山科 亮太, and 志村 浩
  • The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec). 2020, :1-B13

15. Prototyping of musculoskeletal robot based on anatomy of neck of giraffes and performance test [2020]

  • Atsuhiko Niikura, Gen Endo, Hiroyuki Nabae, Kent Mori, Koichi Suzumori, Megu Gunji, Ryuma Niiyama, 新倉 敦彦, 新山 龍馬, 森 健人, 遠藤 玄, 郡司 芽久, 鈴森 康一, and 難波江 裕之
  • The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec). 2020, :1-L03

16. Omnidirectional mechanism from the viewpoint of axial direction drive - Prototyping of the Ciliated Wheel Mechanism and the Vehicle Mechanism with Cross-Helical Gear - [2020]

  • Eri TAKANE, Issei ONDA, Kenjiro TADAKUMA, Masahiro WATANABE, Masashi KONYO, Riichiro TADAKUMA, Satoshi TADOKORO, Tomoya TAKAHASHI, Tori SHIMIZU, Yu OZAWA, 多田隈 建二郎, 多田隈 理一郎, 小澤 悠, 恩田 一生, 昆陽 雅司, 清水 杜織, 渡辺 将広, 田所 諭, 高橋 知也, and 髙根 英里
  • The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec). 2020, :1-H14

17. Development of a center-of-gravity movement device using differential screw driving mechanism for glider type small underwater robots -Prototyping and evaluation of backlash removal mechanism- [2020]

  • Akira SEINO, Hayato IWATA, Takayuki TAKAHASHI, 岩田 逸人, 情野 瑛, and 高橋 隆行
  • The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec). 2020, :1-B05

18. Welding method of polyimide films without molds and prototyping of balloon actuator [2020]

  • Daisuke Yamaguchi, Masaya Takasaki, Takeshi Mizuno, Yosuke Kato, Yuji Ishino, 加藤 陽祐, 山口 大介, 水野 毅, 石野 裕二, and 髙﨑 正也
  • Proceedings of JSPE Semestrial Meeting. 2020, :300

19. A Prototyping of Penile Tumescence Continuous Observation Device [2020]

  • Seiji Matsumoto and Yasuhito Takeuchi
  • Advanced Biomedical Engineering. 2020, 9:167

20. Consideration and prototyping of knowledge base for problem solving in elderly care services [2020]

  • Chiaki OSHIYAMA, Satoshi NISHIMURA, Yuichi OOTA, 太田 祐一, 押山 千秋, and 西村 悟史
  • Proceedings of the Annual Conference of JSAI. 2020, :4

21. Prototyping of Electronic Musical Instrument 'Photomin' as Physical Programming Learning Material for STEAM Education [2020]

  • Naohito KIMURA and 木村 尚仁
  • 工学教育 / Journal of JSEE. 2020, 68(2):2-72

22. DisplayBowl: 半透過凹型半球面ディスプレイの試作と評価 [2020]

  • Hideki KOIKE, Shio MIYAFUJI, Soichiro TOYOHARA, Toshiki SATO, 佐藤 俊樹, 宮藤 詩緒, 小池 英樹, and 豊原 宗一郎
  • コンピュータ ソフトウェア / Computer Software. 2020, 37(1):1-114

23. This title is not available for guests. Log in to see the title and access the article.

24. 스타트업의 디자인 개발을 위한 패스트 피드백 프로토타이핑 방법연구 [2017]

  • 정성훈 ( Jung Sung-hoon ), 윤진영 ( Yoon Jin-young ), 이윤숙 ( Lee Youn-suk ), 조성은 ( Cho Seong-eun ), and 류창완 ( Ryoo Chang-wan)
  • 커뮤니케이션 디자인학연구. Vol. 58 (2017) pg. 32, 14 p.

25. Lean UX 프로세스에서 프로토타이핑 도구의 역할과 개선 방향 [2016]

  • 정명화 ( Jung Myeong Hwa ) and 윤재영 ( Yun Ray Jaeyoung)
  • 디자인융복합연구. Vol. 15 No. 5 (2016) pg. 137, 16 p.

26. 제품디자인 모형제작의 교육적 효과와 새로운 활용방향 제안 -더미모형의 대안을 중심으로- [2016]

  • 이희명 ( Hee Myoung Yi)
  • 기초조형학연구. Vol. 17 No. 3 (2016) pg. 415, 11 p.

27. 창의성의 확산과 수렴적 사고를 중심으로 한 프로토타이핑의 활용도 고찰 [2016]

  • 이지연 ( Lee Jiyoun ) and 나건 ( Nah Ken)
  • 산업디자인학연구. Vol. 10 No. 3 (2016) pg. 83, 13 p.

28. 프로토타이핑 중심의 제품디자인 스튜디오 수업과정 제안에 관한 연구 [2016]

  • 김성룡 ( Sung Lyong Kim)
  • 기초조형학연구. Vol. 17 No. 3 (2016) pg. 45, 12 p.

29. Prototyping of Tactile display technology using MEMS technology-2 [2018]

  • Junji Sone, Katsuhiko Ooizumi, Yasuyoshi Matsumoto, Yoich Hoshi, Yoji Yasuda, 大泉 勝彦, 安田 洋司, 星 陽一, 曽根 順治, and 松本 康義
  • The Proceedings of the Symposium on Micro-Nano Science and Technology. 2018, :31

30. Designing of Prototyping laboratory Design process in 'softdevice Lab.' [2018]

  • Masaaki Nonoyama and 野々山 正章
  • PROCEEDINGS OF THE ANNUAL CONFERENCE OF JSSD. 2018, :278

31. 3D10 Ideas of using Prototyping for encouragement for entrepreneurs on engineering education [2018]

  • Kahori NOHARA, Masatake FUJIOKA, Osamu ERYU, Takuma YANO, 江龍 修, 矢野 卓真, 藤岡 正剛, and 野原 かほり
  • Proceedings of Annual Conference of Japanese Society for Engineering Education. 2018, :434

32. Study on production management method in high-mix low-volume production mainly on prototyping [2019]

  • Akira Tsumaya, Yudai Nakamura, 中村 雄大, and 妻屋 彰
  • Proceedings of JSPE Semestrial Meeting. 2019, :226

33. Introduction to Rapid Prototyping with Micro-Controller for Systems and Control Engineers [2017]

  • Hiroyuki Kajimoto, Masato Ishikawa, 梶本 裕之, and 石川 将人
  • システム／制御／情報 / SYSTEMS, CONTROL AND INFORMATION. 2017, 61(10):422

34. 초보자의 전자회로 프로토타이핑을 위한 회로제작방식 제안 [2015]

  • 유효라(주저자) ( Hyo Ra Yu ) and 박승호(교신저자) ( Seung Ho Park)
  • 디자인융복합연구. Vol. 14 No. 5 (2015) pg. 171, 15 p.

35. UX기반 서비스 프로토타이핑 모델러 개발 -서비스 플로우 & 터치포인트 모델러를 중심으로- [2015]

  • 박인찬 ( In Chan Park)
  • 기초조형학연구. Vol. 16 No. 1 (2015) pg. 221, 14 p.

36. 제품 인터페이스 개발을 위한 프로토타이핑 지원도구에 관한 연구 [2016]

  • 김성룡 ( Sung-lyong Kim)
  • 한국디자인포럼. Vol. 51 (2016) pg. 19, 10 p.

37. SCRATCH3-ROS A Scratch3 ROS Client for Rapid Developing and Prototyping of Robot Programming Front-End Interfaces [2019]

  • Guilherme de Campos Affonso, Kei Okada, and Masayuki Inaba
  • The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec). 2019, :2-M08

38. Development of a flexible roll forming machine for cutting curved parts with virtual prototyping technology [2019]

  • Duc-Viet DANG, Hong-Seok PARK, and Trung-Thanh NGUYEN
  • Journal of Advanced Mechanical Design, Systems, and Manufacturing. 2019, 13(2):0033

39. FaBoセンサのRTC化による簡単なロボットプロトタイピング [2017]

  • Ikumi OOTANI, Yuichi YAGUCHI, 大谷 育未, and 矢口 勇一
  • The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec). 2017, :2-K12

40. Prototyping and Design for Envisioning the Future. About the activities of Design-Led X Platform [2019]

  • Shunji YAMANAKA and 山中 俊治
  • 生産研究 / SEISAN KENKYU. 2019, 71(3):276

41. 모바일 UX 디자인 교육을 위한 페이퍼 프로토타이핑 기법 도입 가능성 모색 [2015]

  • 이미진 ( Mijin Lee ), 윤정진 ( Jeongjin Youn ), and 홍동식 ( Dongsik Hong)
  • 조형미디어학. Vol. 18 No. 3 (2015) pg. 155, 8 p.

42. MR Fluid Jamming Gripper Applying Internally-Balanced Magnetic Unit Controllable by Small Control Force - 1st Report: Basic Structure Prototyping, Miniaturization and Enhancement by Arraying Magnets - [2019]

  • Hikaru TETSUI, Kenjiro TADAKUMA, Masahiro WATANABE, Masashi KONYO, Rio MUKAIDE, Satoshi TADOKORO, Shouhei INOMATA, Sosuke HAYASHI, Tori SHIMIZU, 向出 陸央, 多田隈 建二郎, 昆陽 雅司, 林 聡輔, 清水 杜織, 渡辺 将広, 猪股 翔平, 田所 諭, and 鉄井 光
  • The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec). 2019, :2-G03

43. Electropermanent Jumping Mechanism Applying Internally-Balanced Magnetic Unit with Spring Compressible by Small Control Force - 1st Report: Basic Structure Prototyping and Verification of Motion Model - [2019]

  • Eri Takane, Kenjiro TADAKUMA, Masahiro WATANABE, Masashi KONYO, Satoshi TADOKORO, Sosuke HAYASHI, Tori SHIMIZU, 多田隈 建二郎, 昆陽 雅司, 林 聡輔, 清水 杜織, 渡辺 将広, 田所 諭, and 髙根 英里
  • The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec). 2019, :1-K07

44. BlowFab: Prototyping for Reusable and Rigid Inatable Objects using Laser Cutter [2019]

  • Junichi Yamaoka, Ryuma Niiyama, Yasuaki Kakehi, 山岡 潤一, 新山 龍馬, and 筧 康明
  • ヒューマンインタフェース学会論文誌 / The Transactions of Human Interface Society. 2019, 21(1):61

45. An IoT Oriented Development Framework for Prototyping User Experience on Vehicle Prototypes of User Experience between Things and Passengers on Vehicle [2019]

  • Hidehito Shimada, Hiroshi Yasuda, Ryo Kodama, Shun Taguchi, Tsukasa Shimizu, Yoshihiro Ohama, 大濱 吉紘, 安田 浩志, 小玉 亮, 嶋田 英人, 清水 司, and 田口 峻
  • 自動車技術会論文集 / Transactions of Society of Automotive Engineers of Japan. 2019, 50(4):1182

46. Actuator Control for a Rapid Prototyping Railway Bogie, Using a Dynamically Substructured Systems Approach [2016]

  • David P. STOTEN and Nobuyuki WATANABE
  • Quarterly Report of RTRI. 2016, 57(2):90

47. THE BENEFITS OF PROTOTYPING EARLY IN DESIGN WORKSHOPS Report and insights from an international collaborative workshop between Chiba University and Köln International School of Design, supported by Fujitsu [2016]

  • Algirdas PASKEVICIUS, Andreas Muxel, Giovanni INNELLA, Paul A. RODGERS, and Takayuki HIGUCHI
  • Bulletin of Japanese Society for the Science of Design. 2016, 63(4):4-21

48. REDESIGNING AND PROTOTYPING A SIX SPEED MANUAL AUTOMOTIVE TRANSMISSION OF POWDER METAL GEARS [2017]

  • Anders Flodin and Michael ANDERSSON
  • The Proceedings of the JSME international conference on motion and power transmissions. 2017, :01-11

49. Study on the Efficiency Improvement of Air Conditioning Equipment Maintenance in the Underground Shopping (Part1) Prototyping Tool for Efficiency Improvement of Maintenance Work [2019]

  • 河路 友也 and 野津 真輝
  • Techinical Papers of Annual Meeting the Society of Heating,Air-conditioning and Sanitary Engineers of Japan. 2019, :141

50. Predicting Performance and Prototyping LTDSE with Rotary Displacer [2019]

  • Kosuke OKAZAKI and 岡崎 航介
  • The Proceedings of the Symposium on Stirlling Cycle. 2019, :04

Catalog

Books, media, physical & digital resources
See catalog results

Guides

Course- and topic-based guides to collections, tools, and services.
Search ""Prototyping"" in all guide pages