articles+ search results

137 articles+ results

1 - 20
View results as:
Number of results to display per page

1. Prototyping of Filaments for Fused Filament Fabrication Using CFRP Pellets for Injection Molding [2019]

  • Takashi Suda, Yoshio Fukushima, 福島 祥夫, and 須田 高史
  • Proceedings of JSPE Semestrial Meeting. 2019, :19

2. Development of a Forging Type Rapid Prototyping System Influence of Local Heating and Tool Path on Formability [2014]

  • Hidetake Tanaka, Kanae Yamamoto, Keigo Takasugi, Masato Okada, Naoki Asakawa, 山本 芳苗, 岡田 将人, 浅川 直紀, 田中 秀岳, and 高杉 敬吾
  • Proceedings of JSPE Semestrial Meeting. 2014, :661

3. A microchannel rapid prototyping technique without MEMS device fabrication techniques [2017]

  • Hirotada Hirama, Tomoya Inoue, Toru Torii, 井上 朋也, 平間 宏忠, and 鳥居 徹
  • Proceedings of JSPE Semestrial Meeting. 2017, :839

4. Production Prototyping of Polishing Pad Surface Asperity Pasted Upper Platen for Double Sided Polisher and Its Fundamental Examination [2016]

  • Daizo Ichikawa, Kazutaka Shibuya, Ken-ichi Ishikawa, Kosuke Hayakawa, Michio Uneda, Yoshio Nakamura, 中村 由夫, 市川 大造, 早川 光祐, 澁谷 和孝, 畝田 道雄, and 石川 憲一
  • Proceedings of JSPE Semestrial Meeting. 2016, :217

5. Development of a Forging Type Rapid Prototyping System Influence of Processing Temperature [2012]

  • Hidetake Tanaka, Keigo Takasugi, Mami Jono, Masato Okada, Naoki Asakawa, 城野 麻未, 岡田 将人, 浅川 直紀, 田中 秀岳, and 高杉 敬吾
  • Proceedings of JSPE Semestrial Meeting. 2012, :841

6. Prototyping of Soft Film Actuator for Liquid Nitrogen Temperature by Antagonistic Driving Method [2015]

  • Daisuke Yamaguchi, Masaya Takasaki, Masayuki Hara, Ryotaro Kamimura, Takeshi Mizuno, Tatsuya Hanaki, Yuji Ishino, 上村 崚太郎, 原 正之, 山口 大介, 水野 毅, 石野 裕二, 花木 樹也, and 高崎 正也
  • Proceedings of JSPE Semestrial Meeting. 2015, :885

7. Surface texture Creation by Inkjet Binder Rapid Prototyping [2011]

  • Kazuyuki Sasajima, Seiichiro Hara, Tadasi Kosen, 原 精一郎, 古仙 唯, and 笹島 和幸
  • Proceedings of JSPE Semestrial Meeting. 2011, :942

8. Development of Forging Rapid Prototyping System Path Generation for Incremental Hammering Using an Industrial Robot [2011]

  • Hidetake Tanaka, Keigo Takasugi, Mami Jono, Naoki Asakawa, 城野 麻美, 浅川 直紀, 田中 秀岳, and 高杉 敬吾
  • Proceedings of JSPE Semestrial Meeting. 2011, :333

9. Development of a Forging Type Rapid Prototyping System Relationship between Heating Area and Formability [2011]

  • Hidetake Tanaka, Keigo Takasugi, Mami Jono, Naoki Asakawa, 城野 麻未, 浅川 直紀, 田中 秀岳, and 高杉 敬吾
  • Proceedings of JSPE Semestrial Meeting. 2011, :331

10. Development of a Forging Type Rapid Prototyping System Formability Improvement by Hot Processing [2011]

  • Hidetake Tanaka, Keigo Takasugi, Mami Jono, Naoki Asakawa, 城野 麻未, 浅川 直紀, 田中 秀岳, and 高杉 敬吾
  • Proceedings of JSPE Semestrial Meeting. 2011, :441

11. Design and Prototyping of Innovative CMP/P-CVM Combined Processing Machine(1st report) Basic Concept and Prototype Machine [2014]

  • Hideo Aida, Syuhei Kurokawa, Toshiro Doi, Yasuhisa Sano, 佐野 泰久, 土肥 俊郎, 會田 英雄, and 黒河 周平
  • Proceedings of JSPE Semestrial Meeting. 2014, :271

12. XAML-based 2D/3D UI prototyping system for the development of information appliancesand the usability assessment system [2009]

  • Satoshi Kanai, Taiga Higuchi, 樋口 大河, and 金井 理
  • Proceedings of JSPE Semestrial Meeting. 2009, :149

13. A study on reduction of oxidation inside high density object for metal rapid prototyping [2009]

  • Isamu Kanazawa, Teiichi Takahashi, Tsuyoshi Tokunaga, Yuusuke Shinozuka, 徳永 剛, 篠塚 祐甫, 金沢 勇, and 高橋 貞一
  • Proceedings of JSPE Semestrial Meeting. 2009, :357

14. Development of the Coloring Molding Technique by Rapid Prototyping and Color Material Management [2005]

  • Masamichi Mito, Masayoshi Kobayashi, Muturo Iwakoshi, Satoshi Kanai, Seiki Yasuda, 三戸 正道, 安田 星季, 小林 政義, 岩越 睦郎, and 金井 理
  • Proceedings of JSPE Semestrial Meeting. 2005, :149

15. Development of a Forging Type Rapid Prototyping System [2005]

  • Hidetake Tanaka, Keigo Takasugi, Masatoshi Hirao, Naoki Asakawa, 平尾 政利, 浅川 直紀, 田中 秀岳, and 高杉 敬吾
  • Proceedings of JSPE Semestrial Meeting. 2005, :38

16. Rapid Prototyping by Free Sintering Method (1st Report) Fundamental Study [1998]

  • Hiromu NAKAZAWA, Mitsuo ISHIKAWA, Yusuke MATSUMOTO, 中沢 弘, 松本 祐介, and 石川 光男
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1998, 64(7):1078

17. A Study of Design Environment for Behavioral Prototyping [1999]

  • Satoshi OZEKI, Toshiharu TAURA, 尾関 聡之, and 田浦 俊春
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1999, 65(1):67

18. Development of a Forging Type Rapid Prototyping System [2005]

  • Hidetake Tanaka, Masatoshi Hirao, Naoki Asakawa, 平尾 政利, 浅川 直紀, and 田中 秀岳
  • Proceedings of JSPE Semestrial Meeting. 2005, :613

19. Study on the Measurement of Physical Properties in the Materials for Rapid Prototyping [2007]

  • Abdullah Yassin, Akira Hosokawa, Ryutaro Tanaka, Satoshi Abe, Takashi Tukamoto, Takashi Ueda, Tatsuaki Furumoto, Yassin Abdullah, 上田 隆司, 古本 達明, 塚本 卓, 田中 隆太郎, 細川 晃, and 阿部 諭
  • Proceedings of JSPE Semestrial Meeting. 2007, :841

20. Development of a Forging Type Rapid Prototyping System [2007]

  • Hidetake Tanaka, Masatoshi Hirao, Naoki Asakawa, Shinichi Yonezawa, 平尾 正利, 浅川 直紀, 田中 秀岳, and 米澤 真一
  • Proceedings of JSPE Semestrial Meeting. 2007, :863

Catalog

Books, media, physical & digital resources
See catalog results
Catalog results include