articles+ search results

26 articles+ results

1 - 20
View results as:
Number of results to display per page

1. Theoretical Analysis of Laser Optics for the Rapid Prototyping [1994]

  • Hiroyuki NARAHARA, Katsumasa SAITO, 斎藤 勝政, and 楢原 弘之
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1994, 60(7):994

2. Prototyping of Epoxy/ceramic Photonic Crystals by Stereolithography [2000]

  • Kenji Kajiyama, Soshu Kirihara, and Yoshinari Miyamoto
  • Journal of the Japan Society of Powder and Powder Metallurgy. 2000, 47(3):239

3. Optical System Analysis of the Rapid Prototyping Identification of the Laser Power Density Distribution [1994]

  • Hiroyuki NARAIIARA, Katsumasa SAITO, 斎藤 勝政, and 楢原 弘之
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1994, 60(8):1117

4. Research on fabrication of the magnetic composite material based on the Rapid ProtoTyping [2004]

  • 是澤 宏之, 楢原 弘之, 萩原 宜和, and 鈴木 裕
  • Proceedings of JSPE Semestrial Meeting. 2004, :534

5. Study on prototyping of ultra-micro centrifugal compressor components [2004]

  • Eisuke OUTA, Gaku MINORIKAWA, Ronglei GU, Shimpei MIZUKI, Toshiyuki HIRANO, Yuichiro ASAKA, Yutaka OHTA, 大田 英輔, 太田 有, 平野 利幸, 御法川 学, 朝賀 裕一朗, 水木 新平, and 顧 茸蕾
  • The Proceedings of the National Symposium on Power and Energy Systems. 2004, :43

6. Chapter 5: Recommendations. [2017]

  • Griffey, Jason
  • Library Technology Reports. Jul2017, Vol. 53 Issue 5, p29-31. 3p.
Subjects
3-D printers, Three-dimensional printing, Stereolithography, Rapid prototyping, Printing machinery & supplies, and Equipment & supplies
Abstract
The article evaluates several three dimensional (3D) printers including LulzBot Mini, Raspberry Pi, and OctoPrint.

7. F042006 New developments of AM software in next-generation 3D printer [2015]

  • Yoshikazu Ooba and 大場 好一
  • The Proceedings of Mechanical Engineering Congress, Japan. 2015, 1

8. G1301-1-4 Basic study on a rapid prototype modeling using multi laser beams [2009]

  • Makoto FUKUDA, Yuuta ITO, 伊藤 祐大, and 福田 眞
  • The proceedings of the JSME annual meeting. 2009, :215

9. Clinical Applications of Stereolithography Surgical Applications in the Field of Plastic Surgery [2000]

  • Masahiro KOBAYASHI and Tatsuo NAKAJIMA
  • The Review of Laser Engineering. 2000, 28(7):416

10. A research about measurement of uneven surface of Photoresin for Stereolithography - Examination of improvement on measurement accuracy by consideration of three dimensional arrangement of optical system [2002]

  • Akihiro Yoshikawa, Hiroshi Suzuki, Hiroyuki Narahara, 吉川 晶洋, 楢原 弘之, and 鈴木 裕
  • Proceedings of JSPE Semestrial Meeting. 2002, :709

11. Development of Micro-stereolithography System and Fabrication of Three Dimensional Ceramic Structures to Control Electromagnetic Waves [2007]

  • Soshu Kirihara, Yoshinari Miyamoto, 宮本 欽生, and 桐原 聡秀
  • Preprints of the National Meeting of JWS. 2007, :33

12. Fabrication of Sintered Ceramic Dental-Crown Model by Using Stereolithography [2007]

  • Masahito Ishikawa, Soshu Kirihara, Taiji Sohmura, Yoshinari Miyamoto, 宮本 欽生, 桐原 聡秀, 石川 理一登, and 荘村 泰治
  • Preprints of the National Meeting of JWS. 2007, :32

13. Control of microwave emission from photonic crystals by lattice modifications. [2002]

  • Kazuaki Sakoda, Mitsuo Takeda, Soshu Kirihara, and Yoshinari Miyamoto
  • Preprints of Annual Meeting of The Ceramic Society of Japan Preprints of Fall Meeting of The Ceramic Society of Japan. 2002, :329

14. Measurement of Liquid Surface Unevenness in Stereolithography [2004]

  • Akihiro YOSHIKAWA, Hiroshi SUZUKI, and Hiroyuki NARAHARA
  • JSME International Journal Series C Mechanical Systems, Machine Elements and Manufacturing. 2004, 47(1):129

15. 3109 ポジティブ・ダイレクトマスク光造形に関する研究 [2003]

  • Hiromi OCHIAI, Taku YADA, Tamotsu MURAKAMI, 村上 存, 矢田 拓, and 落合 大実
  • The Proceedings of Design & Systems Conference. 2003, :434

16. Principle of RP Technology and its Applications [2004]

  • Yoji MARUTANI and 丸谷 洋二
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 2004, 70(2):159

17. Studies on Solid Formation Mechanism of Three Dimensional Photofabrication (1st Report) Investigation of Solidified Unit Shape [1995]

  • Hiroyuki NARAHARA, Katsumasa SAITO, Satoru IGARASHI, Shinichi KOJIMA, 五十嵐 悟, 小島 真一, 斎藤 勝政, and 楢原 弘之
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1995, 61(1):117

18. 3. 新しいプロセスによるセラミック電磁波機能材料の開発 [2006]

  • Hideaki KANAOKA, Soshu KIRIHARA, Yoshinari MIYAMOTO, 宮本 欽生, 桐原 聡秀, and 金岡 秀明
  • 材料 / Journal of the Society of Materials Science, Japan. 2006, 55(11):1051

19. Stereolithography Mock-up with Internal Camera for Interface Simulation and Usability Data Acquisition [2007]

  • Michiki NAKANO, Tamotsu MURAKAMI, 中野 道樹, and 村上 存
  • 日本機械学会論文集 C編 / Transactions of the Japan Society of Mechanical Engineers Series C. 2007, 73(727):927

20. Study on the Solidified Depth Parameters Capable of Quantitative Comparison of Photopolymers for Three Dimensional Photofabrication [1993]

  • Hiroyuki NARAILARA, Katsumasa SAITO, 斎藤 勝政, and 楢原 弘之
  • 精密工学会誌 / Journal of the Japan Society for Precision Engineering. 1993, 59(11):1803

Catalog

Books, media, physical & digital resources
See catalog results
Catalog results include