articles+ search results

14,545 articles+ results

View results as:
Number of results to display per page

1. TRIZ-based method for developing a conceptual laparoscopic surgeon’s chair

2. Multifunctional and multimaterial contact lenses: tailored solutions for tunable color filtering and tear pH sensing

3. Modelling, optimization, and testing of novel cuboidal spherical plate lattice structures

4. Development of a novel gantry system for cooperative printing of plastic materials

5. Wire-arc directed energy deposition of monolithic and bimetallic structures of maraging 250 steel

6. 17-4 PH and SS316L bimetallic structures via additive manufacturing

7. Deposition dynamics and analysis of polyurethane foam structure boundaries for aerial additive manufacturing

8. Modeling and application of droplet oscillation momentum for elucidating the development of surface roughness in wire-arc additive manufacturing

9. Manipulating melt pool thermofluidic transport in directed energy deposition driven by a laser intensity spatial shaping strategy

10. Sub-microscale 3D printing based on cold-constrained local electrodeposition

11. Heterogeneous grain structure in biodegradable Zn prepared via mechanical alloying and laser powder bed fusion for strength-plasticity synergy

12. Effect of heat treatment and electroless Ni-P coating on mechanical property and corrosion behaviour of 316L stainless steel fabricated by laser powder bed fusion

13. Effects of path patterns on residual stresses and deformations of directed energy deposition-arc built blocks

14. A non-probabilistic convex modelling framework for uncertainty quantification of laser powder bed fusion fabricated structures based on limited data

15. Enhancing the sensitivity of 3D printed sensors via ironing and void reduction

16. Large-format additive manufacturing of polymers: a review of fabrication processes, materials, and design

17. Multi-objective optimisation of process parameters for laser-based directed energy deposition of a mixture of H13 and M2 steel powders on 4Cr5Mo2SiV1 steel

18. Fatigue performance of metal additive manufacturing: a comprehensive overview

19. Revealing formation mechanism of end of process depression in laser powder bed fusion by multi-physics meso-scale simulation

20. Energy absorption and piezoresistive characteristics of 3D printed honeycomb composites with hybrid cell architecture

21. Additive manufacturing of self-sensing parts through material extrusion

22. Topology optimisation for vat photopolymerization 3D printing of ceramics with flushing jet accessibility constraint

23. Three-dimensional, soft magnetic-cored solenoids via multi-material extrusion

24. LattSAC: a software for the acoustic modelling of lattice sound absorbers

25. Mapping 3D printed part density and filament flow characteristics in the material extrusion (MEX) process for filled and unfilled polymers

26. A novel layer-based optimization method for stabilizing the early printing stage of LPBF process

27. Mechanical property enhancement in additively manufactured NiTi double-asymmetric honeycombs with bioinspired graded design

28. High-efficiency pentafluorostilbene-based photocatalysts dedicated to preparing fluorescent 3D printed polymer nanocomposites

29. Hygro-thermal coupling on 4D-printed biocomposites as key for meteosensitive shape-changing materials

30. Detection and quantitative evaluation of surface defects in wire and arc additive manufacturing based on 3D point cloud

31. Use of creep and recovery protocol to assess the printability of fibre-reinforced 3D printed white Portland cement composites

32. Grain refinement of NiTi alloys during ultrasound-assisted wire-arc directed energy deposition

33. Prediction of low-cycle fatigue properties of additive manufactured IN718 by crystal plasticity modelling incorporating effects from crystallographic orientations and defects

34. Effects of sacrificial coating material in laser shock peening of L-PBF printed AlSi10Mg

35. Co-continuous structure enhanced magnetic responsive shape memory PLLA/TPU blend fabricated by 4D printing

36. The role of controlled voids shape on the flexural properties of 3D printed food: an approach for tailoring their mechanical properties

37. Upgrading analytical models to predict the onset of degradation in selective laser sintering

38. Unlocking multiscale metallic metamaterials via lithography additive manufacturing

39. Integrated free-standing WS2 3D-printed carbon supercapacitor with solid state electrolyte

40. Modelling and researching the evolution of stress during arc-directed energy deposition (ADED) hybrid inter-layer hammering

41. A BIM-enabled robot control system for automated integration between rebar reinforcement and 3D concrete printing

42. A multi-materials 3D-printed continuous conductive fibre-based metamaterial for broadband microwave absorption

43. The enhanced mechanical properties of laser powder bed fusion Al-Mn-Sc alloy via non-isothermal aging

44. Advancing the additive manufacturing of PLA-ZnO nanocomposites by fused filament fabrication

45. AM-SegNet for additive manufacturing in situ X-ray image segmentation and feature quantification

46. A novel model for directed energy deposition-arc based on in-order stacking of primitives

47. An integrated multiscale simulation guiding the processing optimisation for additively manufactured nickel-based superalloys

48. High-precision digital light processing (DLP) printing of microstructures for microfluidics applications based on a machine learning approach

49. A ribbed strategy disrupts conventional metamaterial deformation mechanisms for superior energy absorption

50. Numerical modelling of the viscoelastic polymer melt flow in material extrusion additive manufacturing

Catalog

Books, media, physical & digital resources

Guides

Course- and topic-based guides to collections, tools, and services.