A fabric wall panel system includes wall panels mounted on a wall by means of a releasable hanger. Each fabric wall panel comprises a frame and a flat filler insert covered by a fabric. Each frame member has hanger engaging channel and a fabric clamp. The hanger has a flat base affixed to the wall with two forked tongues extend perpendicularly therefrom. The forked tongues engage the hanger engaging channels to hold the fabric wall panel to the wall. The fabric clamp allows the fabric to be installed or removed with the frame mounted on the wall.
A composition for applying to a variety of surfaces to impart dry erase properties to a substrate surface. A single component paint applied to a substrate surface by aerosol spray, brush, or roller. Currently factory applied, baked on finishes and two-part coating systems are available, but a standard single component paint formulated to withstand the penetration of dry erase markers and cleaners is not in use. Further, an endless number of colors can be produced through the addition of the appropriate pigment to the dry erase paint formulation.
Zhan, Rijing, Anderson, Andy M., and Gabehart, Thomas R.
A non thermal plasma reactor for treating gases. The reactor has a tubelike housing, which contains four concentric channels. A central channel is a gas inlet channel. Two inner channels are a non thermal plasma reactor channel and a catalytic channel. The outer channel is a gas outlet channel.
Anderson, Andy Morris, Bartley, Gordon James Johnston, Webb, Cynthia Chaffin, Heimrich, Martin John, Gabehart, Thomas Ray, and Bykowski, Bruce Bruno
The present application provides a method for evaluating one or more components using a non-engine based test system, the method comprising: providing a non-engine based test system comprising a combustor in fluid communication with the one or more component; supplying fuel and air to the combustor under feed conditions comprising a controlled air to fuel ratio (AFR), the feed conditions being effective to produce a feedstream flowpath; combusting at least a portion of fuel in the feedstream flowpath under combustion conditions effective to produce an exhaust gas while preventing substantial damage to the combustor; and, exposing the one or more components to the exhaust gas under alternate conditions comprising substantially any conditions other than those selected from the group consisting of accelerated aging conditions and drive cycle conditions.