articles+ search results

Female, Humans, Pilot Projects, Endoscopes, Fallopian Tubes, Ovarian Neoplasms diagnostic imaging, and Ovarian Neoplasms pathology

Significance: High grade serous ovarian cancer is the most deadly gynecological cancer, and it is now believed that most cases originate in the fallopian tubes (FTs). Early detection of ovarian cancer could double the 5-year survival rate compared with late-stage diagnosis. Autofluorescence imaging can detect serous-origin precancerous and cancerous lesions in ex vivo FT and ovaries with good sensitivity and specificity. Multispectral fluorescence imaging (MFI) can differentiate healthy, benign, and malignant ovarian and FT tissues. Optical coherence tomography (OCT) reveals subsurface microstructural information and can distinguish normal and cancerous structure in ovaries and FTs.
Aim: We developed an FT endoscope, the falloposcope, as a method for detecting ovarian cancer with MFI and OCT. The falloposcope clinical prototype was tested in a pilot study with 12 volunteers to date to evaluate the safety and feasibility of FT imaging prior to standard of care salpingectomy in normal-risk volunteers. In this manuscript, we describe the multiple modifications made to the falloposcope to enhance robustness, usability, and image quality based on lessons learned in the clinical setting.
Approach: The ∼ 0.8    mm diameter falloposcope was introduced via a minimally invasive approach through a commercially available hysteroscope and introducing a catheter. A navigation video, MFI, and OCT of human FTs were obtained. Feedback from stakeholders on image quality and procedural difficulty was obtained.
Results: The falloposcope successfully obtained images in vivo . Considerable feedback was obtained, motivating iterative improvements, including accommodating the operating room environment, modifying the hysteroscope accessories, decreasing endoscope fragility and fiber breaks, optimizing software, improving fiber bundle images, decreasing gradient-index lens stray light, optimizing the proximal imaging system, and improving the illumination.
Conclusions: The initial clinical prototype falloposcope was able to image the FTs, and iterative prototyping has increased its robustness, functionality, and ease of use for future trials.
(© 2023 The Authors.)

Carrageenan pharmacology, Carrageenan chemistry, Wound Healing, Biocompatible Materials chemistry, Hydrogels pharmacology, Hydrogels chemistry, Gelatin pharmacology, and Gelatin chemistry

Injectable hydrogels based on natural polymers have shown great potential for various tissue engineering applications, such as wound healing. However, poor mechanical properties and weak self-healing ability are still major challenges. In this work, we introduce a host-guest (HG) supramolecular interaction between acrylate-β-cyclodextrin (Ac-β-CD) conjugated on methacrylated kappa-carrageenan (MA-κ-CA) and aromatic residues on gelatin to provide self-healing characteristics. We synthesize an MA-κ-CA to conjugate Ac-β-CD and fabricate dual crosslinked hybrid hydrogels with gelatin to mimic the native extracellular matrix (ECM). The dual crosslinking occurs on the MA-κ-CA backbone through the addition of KCl and photocrosslinking process, which enhances mechanical strength and stability. The hybrid hydrogels exhibit shear-thinning, self-healing, and injectable behavior, which apply easily under a minimally invasive manner and contribute to shear stress during the injection. In-vitro studies indicate enhanced cell viability. Furthermore, scratch assays are performed to examine cell migration and cell-cell interaction. It is envisioned that the combination of self-healing and injectable dual crosslinked hybrid hydrogels with HG interactions display a promising and functional biomaterial platform for wound healing applications.
(© 2023 Wiley Periodicals LLC.)

Synthetic Biology, Biotechnology, Bioengineering, Microalgae genetics, Microalgae metabolism, and Biosensing Techniques

Biosensors are powerful tools to investigate, phenotype, improve and prototype microbial strains, both in fundamental research and in industrial contexts. Genetic and biotechnological developments now allow the implementation of synthetic biology approaches to novel different classes of microbial hosts, for example photosynthetic microalgae, which offer unique opportunities. To date, biosensors have not yet been implemented in phototrophic eukaryotic microorganisms, leaving great potential for novel biological and technological advancements untapped. Here, starting from selected biosensor technologies that have successfully been implemented in heterotrophic organisms, we project and define a roadmap on how these could be applied to microalgae research. We highlight novel opportunities for the development of new biosensors, identify critical challenges, and finally provide a perspective on the impact of their eventual implementation to tackle research questions and bioengineering strategies. From studying metabolism at the single-cell level to genome-wide screen approaches, and assisted laboratory evolution experiments, biosensors will greatly impact the pace of progress in understanding and engineering microalgal metabolism. We envision how this could further advance the possibilities for unraveling their ecological role, evolutionary history and accelerate their domestication, to further drive them as resource-efficient production hosts.
Competing Interests: Declaration of Competing Interest The authors declare no conflicts of interest.
(Copyright © 2023 The Authors. Published by Elsevier Inc. All rights reserved.)

Water Quality

An implementation proposal that seeks to globalize the scope of the sustainable technologies developed in the University laboratories is presented. This approach uses the generation of triple-impact projects placing people at the center of technological development to bring technical and scientific knowledge into a service design oriented to global sustainable solutions. This research is an approach to what a hub for scientific research, technological implementation, and human needs would look like by designing common environments in which to interact and expand knowledge in an iterated way through the experience of all the actors involved in technological implementation. As a control case, a new technology developed at the Universidad de Buenos Aires, consisting of using sustainable materials as tubular reactor fillers for water treatment was chosen. Based on data obtained within the framework of a University extension project, in which the water quality diagnosis for human consumption was carried out and cross-examined with the mathematical analysis of sorption, design parameters of the reactor, participatory design, and open source concepts application, different virtual environments were generated with distinct objectives: i) open design environment: publishing and mapping of installed sorption reactors, reactor model plans, and useful information related to drinking water quality (aimed at contributors of the open source design environment); ii) platform for academic actors linking: connecting data between prototyping lab for participatory design of sorption reactors (aimed at university research users); iii) information disclosure page: space where the implemented technology impact is displayed and shows options to contact researchers and request a reactor design diagnosis for another community (aimed at beneficiary users). A technological service designed to link the University with the community was proposed, by resolving one of the main gaps related to the possibility for communities to access public financing for self-managed improvement projects, increasing the appropriation of the adopted technology and democratizing public investment, making it sustainable over time.
Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
(Copyright © 2023 Elsevier Ltd. All rights reserved.)

Objective: Design thinking is a creative problem-solving process used to better understand users' needs and experiences so that a product or service can be improved. Its emphasis on empathy, iterative prototyping, and participatory collaboration make it an ideal methodology for innovation in medical education. We apply this framework to the virtual rheumatology fellowship interview process so that interviews can become more applicant centered.
Methods: This educational quality improvement project uses a design-thinking framework to identify opportunities and challenges for rheumatology fellowship applicants. The investigators use the 5-step process (Empathize, Define, Ideate, Prototype, Test) and incorporate rapid qualitative analysis of semistructured interviews to innovate the interview experience. The iterative and collaborative nature of this process has empowered participants to codesign an applicant-centered interview experience.
Results: Interviews with fellowship applicants (n = 9), fellow physicians (n = 4), and faculty members (n = 3) identified three major dynamics of the interview process: (1) Is it a safe environment to ask questions? (2) How do I exchange information effectively? and (3) How do I fit all these data into the bigger picture? Creative brainstorming techniques at a series of three workshops yielded four prototypes emphasizing customization, hybridization, facilitation, and preparation. A finalized applicant-centered interview template was devised in preparation for the 2023-2024 application season.
Conclusion: Design thinking has yielded insights into three important dynamics that drive applicant experiences. These insights allow for a redesign of processes so that virtual interviews can be more applicant centered. This framework allows for further iterations and modifications as the needs of applicants and programs evolve over time.
(© 2023 The Authors. ACR Open Rheumatology published by Wiley Periodicals LLC on behalf of American College of Rheumatology.)

Introduction: Additive manufacturing is a tool with potential use in medicine and dentistry. The manufacture of metals and composites is already advanced, however, concerns about titanium hypersensitivity, tissue staining, and corrosion caused by gradual material degradation encourage research into more biocompatible alternatives.
Objective: This systematic scoping review aimed to gather studies that evaluated zirconia implants produced by additive manufacturing to describe the current stage of the printing technique and the final product.
Methods: Searches in Embase, PubMed, SCOPUS, Web of Science, and Google Scholar databases were enriched with manual searches between February and March 2021 and updated in June 2022 using keywords: zirconium implants, zirconium oxide, additive manufacturing, rapid prototyping, 3D printing, selective laser melting, and electron beam melting. The criteria included studies that evaluated or described zirconia implants obtained by 3D printing, with a direct relationship to dentistry or orthopedics.
Results: The database search resulted in 671 articles. Eight articles were selected for full reading and remained in this systematic review.
Conclusion: The printing technique for zirconia implants is promising. However, further studies are required before implants produced by the printing technique can be tested clinically. The literature with results regarding the impression product is still limited.
(Copyright© 2023 Dennis Barber Ltd.)

Magnetically hard materials are widely used to build soft magnetic robots, providing large magnetic force/torque and macrodomain programmability. However, their high magnetic coercivity often presents practical challenges when attempting to reconfigure magnetization patterns, requiring a large magnetic field or heating. In this study, we introduce magnetic putty as a magnetically hard and soft material with large remanence and low coercivity. We show that the magnetization of magnetic putty can be easily reoriented with maximum magnitude using an external field that is only one tenth of its coercivity. Additionally, magnetic putty is a malleable, autonomous self-healing material that can be recycled and repurposed. We anticipate magnetic putty could provide a versatile and accessible tool to various magnetic robotics applications for fast prototyping and explorations for research and educational purposes. This article is protected by copyright. All rights reserved.
(This article is protected by copyright. All rights reserved.)

In a world grappling with environmental challenges and the need for sustainable manufacturing practices, the convergence of 3D printing and recycling emerges as a promising solution. This research paper explores the potential of combining these two technologies and comprehensively analyses their synergistic effects. The study delves into the printability of recycled materials, evaluating their suitability for 3D printing and comparing their performance with conventional materials. The environmental impact of 3D printing with recycled materials is examined through a sustainability analysis and a life cycle assessment of recycled 3D printed objects. The findings reveal significant benefits, including enhanced resource efficiency, waste reduction, and customisation possibilities. The research also identifies challenges and opportunities for scaling up the use of recycled materials in 3D printing, highlighting the importance of collaboration, innovation, and regulations. With potential applications spanning various industries, from prototyping to construction and healthcare, the implications of this research are far-reaching. By embracing sustainable practices, industry collaboration, and innovation, the integration of 3D printing and recycling can pave the way for a more sustainable future, where resource conservation, circularity, and customised production are at the forefront of manufacturing.
(Copyright © 2023. Published by Elsevier B.V.)

Background: Increased levels of physical activity are associated with beneficial health effects for people with type 2 diabetes, cardiovascular disease and/or severe obesity; however, transforming knowledge about these effects into action is challenging. The aim of this paper is to explore lessons learnt from a co-creation process in a partnership project involving local stakeholders, including citizens, and researchers. The purpose of the process was to link a public health care institution with civil society organisations in the local community to make it possible for citizens to continue to be physically active after ending their public rehabilitation. Secondarily, this paper aims to develop a conceptual model of the above process.
Methods: The study constitutes the first part of Project Active Communities and was based on a partnership between three research institutions and a Danish rural municipality, involving municipal and civil society stakeholders and citizens with type 2 diabetes, cardiovascular disease and/or severe obesity in co-creation of concrete interventions for implementation. The co-creation process was divided into two tracks, one involving citizens (two workshops) and one involving municipal and civil society stakeholders (two workshops). The two tracks were concluded with a final workshop involving all stakeholders, including local politicians. Data sources are focus groups and bilateral meetings, workshop observations, and questionnaires.
Results: Lessons learnt include the importance of having a flexible timeframe for the co-creation process; giving room for disagreements and matching of mutual expectations between stakeholders; the value of a coordinator in the municipality to achieve acceptance of the project; and the significance of engaging local politicians in the co-creation process to accommodate internal political agendas. We have developed a conceptual model for a co-creation process, where we outline and explain three distinct phases: stakeholder identification and description, co-creation, and prototyping. The model can be adapted and applied to other sectors and settings.
Conclusions: This study documents lessons learnt in a co-creation process aiming to link a public health care institution with civil society organisations in the local community. Further, this study has specified productive co-creative processes and documented the various phases in a conceptual model.
(© 2023. BioMed Central Ltd., part of Springer Nature.)

Introduction: Outpatient monitoring of children using invasive home mechanical ventilation (IHMV) is recommended, but access to care can be difficult. This study tested if remote (home-based) data collection was feasible and acceptable in chronic IHMV management.
Methods: A codesign study was conducted with an IHMV program, home nurses, and English- and Spanish-speaking parent-guardians of children using IHMV (0-17 years; n = 19). After prototyping, parents used a remote patient monitoring (RPM) bundle to collect patient heart rate, respiratory rate (RR), oxygen saturation, end-tidal carbon dioxide (EtCO 2 ), and ventilator pressure/volume over 8 weeks. User feedback was analyzed using qualitative methods and the System Usability Scale (SUS). Expected marginal mean differences within patient measures when awake, asleep, or after a break were calculated using mixed effects models.
Results: Patients were a median 2.9 years old and 11 (58%) took breaks off the ventilator. RPM data were entered on a mean of 83.7% (SD ± 29.1%) weeks. SUS scores were 84.8 (SD ± 10.5) for nurses and 91.8 (SD ± 10.1) for parents. Over 90% of parents agreed/strongly agreed that RPM data collection was feasible and relevant to their child's care. Within-patient comparisons revealed that EtCO 2 (break-vs-asleep 2.55 mmHg, d = 0.79 [0.42-1.15], p < .001; awake-vs-break 1.48, d = -0.49 [0.13-0.84], p = .02) and RR (break-vs-asleep 16.14, d = 2.12 [1.71-2.53], p < .001; awake-vs-break 3.44, d = 0.45 [0.10-0.04], p = .03) were significantly higher during ventilator breaks.
Conclusions: RPM data collection in children with IHMV was feasible, acceptable, and captured clinically meaningful vital sign changes during ventilator breaks, supporting the clinical utility of RPM in IHMV management.
(© 2023 The Authors. Pediatric Pulmonology published by Wiley Periodicals LLC.)

Humans, Skin microbiology, Propionibacterium acnes genetics, Synthetic Biology, Acne Vulgaris genetics, and Acne Vulgaris microbiology

In the past few years, new bacterial-cell-free transcription-translation systems have emerged as potent and quick platforms for protein production as well as for prototyping of DNA regulatory elements, genetic circuits, and metabolic pathways. The Gram-positive commensal Cutibacterium acnes is one of the most abundant bacteria present in the human skin microbiome. However, it has recently been reported that some C. acnes phylotypes can be associated with common inflammatory skin conditions, such as acne vulgaris, whereas others seem to play a protective role, acting as possible "skin probiotics". This fact has made C. acnes become a bacterial model of interest for the cosmetic industry. In the present study we report for the first time the development and optimization of a C. acnes -based cell-free system (CFS) that is able to produce 85 μg/mL firefly luciferase. We highlight the importance of harvesting the bacterial pellet in mid log phase and maintaining CFS reactions at 30 °C and physiological pH to obtain the optimal yield. Additionally, a C. acnes promoter library was engineered to compare coupled in vitro TX-TL activities, and a temperature biosensor was tested, demonstrating the wide range of applications of this toolkit in the synthetic biology field.

Reconfigurable modular microfluidics presents an opportunity for flexibly constructing prototypes of advanced microfluidic systems. Nevertheless, the strategy of directly integrating modules cannot easily fulfill the requirements of common applications, e.g., the incorporation of materials with biochemical compatibility and optical transparency and the execution of small batch production of disposable chips for laboratory trials and initial tests. Here, we propose a manufacturing scheme inspired by the movable type printing technique to realize 3D free-assembly modular microfluidics. Double-layer 3D microfluidic structures can be produced by replicating the assembled molds. A library of modularized molds is presented for flow control, droplet generation and manipulation and cell trapping and coculture. In addition, a variety of modularized attachments, including valves, light sources and microscopic cameras, have been developed with the capability to be mounted onto chips on demand. Microfluidic systems, including those for concentration gradient generation, droplet-based microfluidics, cell trapping and drug screening, are demonstrated. This scheme enables rapid prototyping of microfluidic systems and construction of on-chip research platforms, with the intent of achieving high efficiency of proof-of-concept tests and small batch manufacturing.
Competing Interests: Conflict of interestThe authors declare no competing interests.
(© Aerospace Information Research Institute, Chinese Academy of Sciences 2023.)

Clothing fit and pressure comfort play important role in clothing comfort, especially in medical body sculpting clothing (MBSC). In the present study, different body movements (forward bending, side bending, and twisting) were adopted to simulate and investigate the biomechanical stress distribution of the human body with three kinds of porosity inelastic MBSCs through the finite element analysis method. The elastic modulus of the investigated MBSCs was also measured by means of tensile testing. Analytical results showed that in the compression region during body movements, the investigated inelastic MBSCs endured less compression stress, and most of the stress was transmitted to the human body. Moreover, the stresses on the body surface were decreased with the porosity increasing. However, most of the von Mises stresses on the human body were in the desired pressure comfort range. Therefore, these results could provide potential information in the modification of MBSC for medical applications.
Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Shyuan-Yow Chen reports financial support was provided by Cathay General Hospital. Jia-Wei You reports financial support was provided by Taipei Medical University Hospital.
(Copyright © 2023. Published by Elsevier Ltd.)

Humans, Ankle, Muscles, Walking, Knee Joint, Fatigue, Walking Speed, and Foot Orthoses

Background: The stiffness of a dorsal leaf AFO that minimizes walking energy cost in people with plantarflexor weakness varies between individuals. Using predictive simulations, we studied the effects of plantarflexor weakness, passive plantarflexor stiffness, body mass, and walking speed on the optimal AFO stiffness for energy cost reduction.
Methods: We employed a planar, nine degrees-of-freedom musculoskeletal model, in which for validation maximal strength of the plantar flexors was reduced by 80%. Walking simulations, driven by minimizing a comprehensive cost function of which energy cost was the main contributor, were generated using a reflex-based controller. Simulations of walking without and with an AFO with stiffnesses between 0.9 and 8.7 Nm/degree were generated. After validation against experimental data of 11 people with plantarflexor weakness using the Root-mean-square error (RMSE), we systematically changed plantarflexor weakness (range 40-90% weakness), passive plantarflexor stiffness (range: 20-200% of normal), body mass (+ 30%) and walking speed (range: 0.8-1.2 m/s) in our baseline model to evaluate their effect on the optimal AFO stiffness for energy cost minimization.
Results: Our simulations had a RMSE < 2 for all lower limb joint kinetics and kinematics except the knee and hip power for walking without AFO. When systematically varying model parameters, more severe plantarflexor weakness, lower passive plantarflexor stiffness, higher body mass and walking speed increased the optimal AFO stiffness for energy cost minimization, with the largest effects for severity of plantarflexor weakness.
Conclusions: Our forward simulations demonstrate that in individuals with bilateral plantarflexor the necessary AFO stiffness for walking energy cost minimization is largely affected by severity of plantarflexor weakness, while variation in walking speed, passive muscle stiffness and body mass influence the optimal stiffness to a lesser extent. That gait deviations without AFO are overestimated may have exaggerated the required support of the AFO to minimize walking energy cost. Future research should focus on improving predictive simulations in order to implement personalized predictions in usual care. Trial Registration Nederlands Trial Register 5170. Registration date: May 7th 2015.  http://www.trialregister.nl/trialreg/admin/rctview.asp?TC=5170.
(© 2023. BioMed Central Ltd., part of Springer Nature.)

Animals, Mice, Dimethylpolysiloxanes, Disease Models, Animal, Wound Healing, and Capillary Tubing

The development of wearable bioelectronic systems is a promising approach for optimal delivery of therapeutic treatments. These systems can provide continuous delivery of ions, charged biomolecules, and an electric field for various medical applications. However, rapid prototyping of wearable bioelectronic systems for controlled delivery of specific treatments with a scalable fabrication process is challenging. We present a wearable bioelectronic system comprised of a polydimethylsiloxane (PDMS) device cast in customizable 3D printed molds and a printed circuit board (PCB), which employs commercially available engineering components and tools throughout design and fabrication. The system, featuring solution-filled reservoirs, embedded electrodes, and hydrogel-filled capillary tubing, is assembled modularly. The PDMS and PCB both contain matching through-holes designed to hold metallic contact posts coated with silver epoxy, allowing for mechanical and electrical integration. This assembly scheme allows us to interchange subsystem components, such as various PCB designs and reservoir solutions. We present three PCB designs: a wired version and two battery-powered versions with and without onboard memory. The wired design uses an external voltage controller for device actuation. The battery-powered PCB design uses a microcontroller unit to enable pre-programmed applied voltages and deep sleep mode to prolong battery run time. Finally, the battery-powered PCB with onboard memory is developed to record delivered currents, which enables us to verify treatment dose delivered. To demonstrate the functionality of the platform, the devices are used to deliver H[Formula: see text] in vivo using mouse models and fluoxetine ex vivo using a simulated wound environment. Immunohistochemistry staining shows an improvement of 35.86% in the M1/M2 ratio of H[Formula: see text]-treated wounds compared with control wounds, indicating the potential of the platform to improve wound healing.
(© 2023. Springer Nature Limited.)

Background: An active online learning environment enables 2-way communication wherein students can engage in problem-based learning and projects, unlike fragmented lecture-style classes.
Purpose: This pilot study aimed to develop a metaverse-based online learning system and evaluate its usability.
Methods: A rapid prototyping model and Gather.town was used to design and develop a metaverse classroom. Participants were 10 nursing students from a college in South Korea. To evaluate usability, 10 tasks were configured and 2 pilot tests were conducted. The degree of difficulty, time required to perform tasks, and students' experience were investigated.
Results: The Metaverse for Education of Nursing Students was successfully completed, incorporating student feedback and addressing identified areas for improvement.
Conclusion: This study reflects a learner-centered educational environment through the direct participation in the development process of the instructors who conducted the lectures. The metaverse space can be widely applied in creative nursing education in the future.
Competing Interests: The authors disclose no conflicts of interest.
(Copyright © 2023 Wolters Kluwer Health, Inc. All rights reserved.)

Background: Lumbar puncture is an essential medical procedure whose objective is to obtain cerebrospinal fluid. Lumbar puncture is considered a complex procedure, mainly for novice residents who suffer from stress and low confidence, which may result in harm to the patient.
Methods: The LPVirSim, has been developed in four stages: i) requirements analysis through user-centred design; ii) prototyping of the virtual environment and the haptic component; iii) preliminary tests with Ph.D. students and physicians using two haptic devices (Omega.7 and Sigma.7); iv) a user study where physicians evaluated the usability and user experience.
Results: The LPVirSim integrates non-technical skills and the possibility of representing different patients for training. Usability increased from 61.76 to 68.75 in the preliminary tests to 71.43 in the user study.
Conclusions: All the results showed good usability and demonstrated that the simulator arouses interest and realistically represents a Lumbar puncture, through the force and visual feedback.
(© 2023 John Wiley & Sons Ltd.)

This design study presents an analysis and abstraction of temporal and spatial data, and workflows in the domain of hydrogeology and the design and development of an interactive visualization prototype. Developed in close collaboration with a group of hydrogeological researchers, the interface supports them in data exploration, selection of data for their numerical model calibration, and communication of findings to their industry partners. We highlight both pitfalls and learnings of the iterative design and validation process and explore the role of rapid prototyping. Some of the main lessons were that the ability to see their own data changed the engagement of skeptical users dramatically and that interactive rapid prototyping tools are thus powerful to unlock the advantage of visual analysis for novice users. Further, we observed that the process itself helped the domain scientists understand the potential and challenges of their data more than the final interface prototype.

Models of urea kinetics facilitate a mechanistic understanding of urea transfer and provide a tool for optimizing dialysis efficacy. Dual-compartment models have largely replaced single-compartment models as they are able to accommodate the urea rebound on the cessation of dialysis. Modeling the kinetics of urea and other molecular species is frequently regarded as a rarefied academic exercise with little relevance at the bedside. We demonstrate the utility of System Dynamics in creating multi-compartment models of urea kinetics by developing a dual-compartment model that is efficient, intuitive, and widely accessible to a range of practitioners. Notwithstanding its simplicity, we show that the System Dynamics model compares favorably with the performance of a more complex volume-average model in terms of calibration to clinical data and parameter estimation. Its intuitive nature, ease of development/modification, and excellent performance with real-world data may make System Dynamics an invaluable tool in widening the accessibility of hemodialysis modeling.
(© 2023. The Author(s).)

Optical sensing offers several advantages owing to its non-invasiveness and high sensitivity. The miniaturization of optical sensors will mitigate spatial and weight constraints, expanding their applications and extending the principal advantages of optical sensing to different fields, such as healthcare, Internet of Things, artificial intelligence, and other aspects of society. In this study, we present the development of a miniature optical sensor for monitoring thrombi in extracorporeal membrane oxygenation (ECMO). The sensor, based on a complementary metal-oxide semiconductor integrated circuit (CMOS-IC), also serves as a photodiode, amplifier, and light-emitting diode (LED)-mounting substrate. It is sized 3.8 × 4.8 × 0.75 mm 3 and provides reflectance spectroscopy at three wavelengths. Based on semiconductor and microelectromechanical system (MEMS) processes, the design of the sensor achieves ultra-compact millimeter size, customizability, prototyping, and scalability for mass production, facilitating the development of miniature optical sensors for a variety of applications.

Animals, Antivenins therapeutic use, Antibodies, Monoclonal therapeutic use, Snake Bites diagnosis, Snake Bites drug therapy, Crotalid Venoms therapeutic use, and Bothrops

Background: Brazil is home to a multitude of venomous snakes; perhaps the most medically relevant of which belong to the Bothrops genus. Bothrops spp. are responsible for roughly 70% of all snakebites in Brazil, and envenomings caused by their bites can be treated with three types of antivenom: bothropic antivenom, bothro-lachetic antivenom, and bothro-crotalic antivenom. The choice to administer antivenom depends on the severity of the envenoming, while the choice of antivenom depends on availability and on how certain the treating physician is that the patient was bitten by a bothropic snake. The diagnosis of a bothropic envenoming can be made based on expert identification of the dead snake or a photo thereof or based on a syndromic approach wherein the clinician examines the patient for characteristic manifestations of envenoming. This approach can be very effective but requires staff that has been trained in clinical snakebite management, which, unfortunately, far from all relevant staff has.
Results: In this article, we describe a prototype of the first lateral flow assay (LFA) capable of detecting venoms from Brazilian Bothrops spp. The monoclonal antibodies for the assay were generated using hybridoma technology and screened in sandwich enzyme-linked immunosorbent assays (ELISAs) to identify Bothrops spp.-specific antibody sandwich pairs. The prototype LFA is able to detect venom from several Bothrops spp. The LFA has a limit of detection (LoD) of 9.5 ng/mL in urine, when read with a commercial reader, and a visual LoD of approximately 25 ng/mL.
Significance: The work presented here serves as a proof of concept for a genus-specific venom detection kit that could support physicians in diagnosing Bothrops envenomings. Although further optimisation and testing is needed before the LFA can find clinical use, such a device could aid in decentralising antivenoms in the Brazilian Amazon and help ensure optimal snakebite management for even more victims of this highly neglected disease.
Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Cecilie Knudsen, Jonas A. Jürgensen, Søren H. Dam, Aleksander M. Haack, Rasmus U. W. Friis, and Andreas H. Laustsen are co-founders of VenomAid Diagnostics A/S. Jonas A. Jürgensen, Pelle D. Knudsen, and Georgina M. Ross are employed by VenomAid Diagnostics A/S. Cecilie Knudsen is an industrial PhD student at the Technical University of Denmark. Her PhD is co-sponsored by Innovation Fund Denmark and BioPorto Diagnostics A/S. Cecilie Knudsen, Jonas A. Jürgensen, Søren H. Dam, Aleksander M. Haack, Rasmus U. W. Friis, and Andreas H. Laustsen have been designated as inventors on a patent application related to the work presented here.
(Copyright © 2023 The Author(s). Published by Elsevier B.V. All rights reserved.)

Since temperature and its spatial, and temporal variations affect a wide range of physical properties of material systems, they can be used to create reconfigurable spatial structures of various types in physical and biological objects. This paper presents an experimental optical setup for creating tunable two-dimensional temperature patterns on a micrometer scale. As an example of its practical application, we have produced temperature-induced magnetization landscapes in ferrimagnetic yttrium iron garnet films and investigated them using micro-focused Brillouin light scattering spectroscopy. It is shown that, due to the temperature dependence of the magnon spectrum, spatial temperature distributions can be visualized even for microscale thermal patterns.
(© 2023 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).)

Humans, Thinking, and Pharmacy Research

Design thinking is an approach to problem solving that focuses on a solution to a problem. This systematic approach can be applied to practice-based research or implementation projects in your practice setting. It may be useful for starting new projects as well as revisiting past projects that may not have yielded meaningful results. The design-thinking process begins with identifying a problem or knowledge gap and then the steps include: (1) understanding the problem, (2) observing the problem, (3) defining the problem, (4) brainstorming possible solutions, (5) prototyping the best solution, and (6) testing the solution.

Humans, Child, United States, Medical Oncology, Surveys and Questionnaires, Awareness, Neoplasms drug therapy, and Nurses

The expanded access to clinical trials has provided more patients the opportunity to participate in novel therapeutics research. There is an increased likelihood of a patient, as a pediatric oncology clinical trial participant, to present for clinical care outside the research site, such as at an emergency room or urgent care center. A novel wearable universal serial bus device is a proposed technology to bridge potential communication gaps, pertaining to critical information such as side effects and permitted therapies, between research teams and clinical teams where investigational agents may be contraindicated to standard treatments. Fifty-five emergency and urgent care nurses across the United States were presented, via online survey without priming to the context of clinical trials or the device, a picture of a pediatric patient wearing the novel wearable device prompted to identify significant, environmental cues important for patient care. Of the 40 nurses observing the patient photo, three identified the wearable device within Situational Awareness Global Assessment Tool formatted narrative response fields. Analysis of the narrative nurse-participant responses of significant clinical findings upon initial assessment of the pediatric patient photo is described, as well as the implications for subsequent prototyping of the novel universal serial bus prototype.
(Copyright © 2023 Wolters Kluwer Health, Inc. All rights reserved.)

The increasing interests in analog computing nowadays call for multipurpose analog computing platforms with reconfigurability. The advancement of analog computing, enabled by novel electronic elements like memristors, has shown its potential to sustain the exponential growth of computing demand in the new era of analog data deluge. Here, a platform of a memristive field-programmable analog array (memFPAA) is experimentally demonstrated with memristive devices serving as a variety of core analog elements and CMOS components as peripheral circuits. The memFPAA is reconfigured to implement a first-order band pass filter, an audio equalizer, and an acoustic mixed frequency classifier, as application examples. The memFPAA, featured with programmable analog memristors, memristive routing networks, and memristive vector-matrix multipliers, opens opportunities for fast prototyping analog designs as well as efficient analog applications in signal processing and neuromorphic computing.
(© 2022 The Authors. Advanced Materials published by Wiley-VCH GmbH.)

Modern technological advancements have opened avenues for innovative low-energy sources in construction, with electric field energy harvesting (EFEH) from overhead power lines serving as a prime candidate for empowering intelligent monitoring sensors and vital communication networks. This study delves into this concept, presenting a physical model of an energy harvester device. The prototype was meticulously designed, simulated, constructed, and tested, to validate its foundational mathematical model, with implications for future prototyping endeavors. The findings illustrate the potential of harnessing ample power from this device when deployed on medium-voltage (MV) overhead power lines, facilitating the monitoring of electric and meteorological parameters and their seamless communication through the Internet of Things (IoT) network. The study focused on the medium voltage applications of the harvester. Two dielectric materials were tested in the present experiments: air and polyurethane. The measurement results exhibited satisfactory alignment, particularly with the air dielectric. Nevertheless, deviations arose when employing polyurethane rubber as the dielectric, due to impurities and defects within the material. The feasibility of generating the requisite 0.84 mW output power to drive process electronics, sensors, and IoT communications was established. The novelty of this work rests in its comprehensive approach, cementing the theoretical concept through rigorous experimentation, and emphasizing its application in enhancing the efficacy of overhead power line monitoring.

LoRa technology has gained popularity as one of the most widely used standards for device interconnection due to its ability to cover long distances and energy efficiency, making it a suitable choice for various Internet of Things (IoT) monitoring and control applications. In this sense, this work presents the development of a visual support tool for creating IoT devices with LoRa and LoRaWAN connectivity. This work significantly advances the state of the art in LoRa technology by introducing a novel visual support tool tailored for creating IoT devices with LoRa and LoRaWAN connectivity. By simplifying the development process and offering compatibility with multiple hardware solutions, this research not only facilitates the integration of LoRaWAN technology within educational settings but also paves the way for rapid prototyping of IoT nodes. The incorporation of block programming for LoRa and LoRaWAN using the Arduinoblocks framework as a graphical environment enhances the capabilities of the tool, positioning it as a comprehensive solution for efficient firmware generation. In addition to the visual tool for firmware generation, multiple compatible hardware solutions enable easy, economical, and stable development, offering a comprehensive hardware and software solution. The hardware proposal is based on an ESP32 microcontroller, known for its power and low cost, in conjunction with an RFM9x module that is based on SX127x LoRa transceivers. Finally, three successfully tested use cases and a discussion are presented.

Humans, Prospective Studies, Fatigue, Educational Status, Psychiatry, and Military Personnel

Background: Military service inherently includes frequent periods of high-stress training, operational tempo, and sustained deployments to austere far-forward environments. These occupational requirements can contribute to acute and chronic sleep disruption, fatigue, and behavioral health challenges related to acute and chronic stress and disruption of team dynamics. To date, there is no centralized mobile health platform that supports self- and supervised detection, monitoring, and management of sleep and behavioral health issues in garrison and during and after deployments.
Objective: The objective of this study was to adapt a clinical decision support platform for use outside clinical settings, in garrison, and during field exercises by medics and soldiers to monitor and manage sleep and behavioral health in operational settings.
Methods: To adapt an existing clinical decision support digital health platform, we first gathered system, content, and context-related requirements for a sleep and behavioral health management system from experts. Sleep and behavioral health assessments were then adapted for prospective digital data capture. Evidence-based and operationally relevant educational and interventional modules were formatted for digital delivery. These modules addressed the management and mitigation of sleep, circadian challenges, fatigue, stress responses, and team communication. Connectivity protocols were adapted to accommodate the absence of cellular or Wi-Fi access in deployed settings. The resulting apps were then tested in garrison and during 2 separate field exercises.
Results: Based on identified requirements, 2 Android smartphone apps were adapted for self-monitoring and management for soldiers (Soldier app) and team supervision and intervention by medics (Medic app). A total of 246 soldiers, including 28 medics, received training on how to use the apps. Both apps function as expected under conditions of limited connectivity during field exercises. Areas for future technology enhancement were also identified.
Conclusions: We demonstrated the feasibility of adapting a clinical decision support platform into Android smartphone-based apps to collect, save, and synthesize sleep and behavioral health data, as well as share data using adaptive data transfer protocols when Wi-Fi or cellular data are unavailable. The AIRE (Autonomous Connectivity Independent System for Remote Environments) prototype offers a novel self-management and supervised tool to augment capabilities for prospective monitoring, detection, and intervention for emerging sleep, fatigue, and behavioral health issues that are common in military and nonmilitary high-tempo occupations (eg, submarines, long-haul flights, space stations, and oil rigs) where medical expertise is limited.
(©Anne Germain, Megan Wolfson, I Wayan Pulantara, Meredith L Wallace, Katie Nugent, George Mesias, Kristina Clarke-Walper, Phillip J Quartana, Joshua Wilk. Originally published in the Journal of Medical Internet Research (https://www.jmir.org), 28.08.2023.)

"openFrame" is a modular, low-cost, open-hardware microscopy platform that can be configured or adapted to most light microscopy techniques and is easily upgradeable or expandable to multiple modalities. The ability to freely mix and interchange both open-source and proprietary hardware components or software enables low-cost, yet research-grade instruments to be assembled and maintained. It also enables rapid prototyping of advanced or novel microscope systems. For long-term time-lapse image data acquisition, slide-scanning or high content analysis, we have developed a novel optical autofocus incorporating orthogonal cylindrical optics to provide robust single-shot closed-loop focus lock, which we have demonstrated to accommodate defocus up to ±37 μm with <200 nm accuracy, and a 2-step autofocus mode which we have shown can operate with defocus up to ±68 μm. We have used this to implement automated single molecule localization microscopy (SMLM) in a relatively low cost openFrame-based instrument using multimode diode lasers for excitation and cooled CMOS cameras. This article is protected by copyright. All rights reserved.
(This article is protected by copyright. All rights reserved.)

Humans, Employment, and User-Centered Design

This paper presents elements of user-centered design and prototyping of a serious game. Produced within the framework of the SG-HANDI project, the serious game aims to raise awareness about integration, prevention of professional displacement and job retention of people with disabilities. This serious game is developed on an interactive RFID tabletop with tangible objects. It is intended to be used in a collective context involving one or more facilitators specialized in employment and disability, as well as the company's stakeholders to be made aware of the issue.

In the field of bioprocess development miniaturization, parallelization and flexibility play a key role reducing costs and time. To precisely meet these requirements, additive manufacturing (3D-printing) is an ideal technology. 3D-printing enables rapid prototyping and cost-effective fabrication of individually designed devices with complex geometries on demand. For successful bioprocess development, monitoring of process-relevant parameters, such as pH, dissolved oxygen (DO), and biomass, is crucial. Online monitoring is preferred as offline sampling is time-consuming and leads to loss of information. In this study, 3D-printed cultivation vessels with optical prisms are evaluated for the use in upstream processes of different industrially relevant microorganisms and cell lines. It was shown, that the 3D-printed optically modified well (OMW) is of benefit for a wide range of biotechnologically relevant microorganisms and even for mammalian suspension cells. Evaluation tests with Escherichia coli , Bacillus subtilis , Saccharomyces cerevisiae , and Chinese hamster ovary (CHO) cells were performed, providing highly reproducible results. Growth behavior of OMW cultures was comparable to behavior of shake flask (SF) cultivations and the signal to noise ratio in online biomass measurement was shown to be reduced up to 95.8% by using the OMW. Especially the cultivation phases with low turbidity respective optical densities below 1.0 rel.AU could be monitored accurately for the first time. Furthermore, it was demonstrated that the 3D-printed optics are transferable to different well geometries and sizes, enabling efficient biomass monitoring for individual requirements with tailor-made 3D-printed cultivation vessels in small scale.
Competing Interests: The authors declare no conflict of interest.
(© 2023 The Authors. Engineering in Life Sciences published by Wiley‐VCH GmbH.)

Fabrication of patterned boron-doped diamond (BDD) in an inexpensive and straightforward way is required for a variety of practical applications, including the development of BDD-based electrochemical sensors. This work describes a simplified and novel bottom-up fabrication approach for BDD-based three-electrode sensor chips utilizing direct inkjet printing of diamond nanoparticles on silicon-based substrates. The whole seeding process, accomplished by a commercial research inkjet printer with piezo-driven drop-on-demand printheads, was systematically examined. Optimized and continuous inkjet-printed features were obtained with glycerol-based diamond ink (0.4% vol/wt), silicon substrates pretreated by exposure to oxygen plasma and subsequently to air, and applying a dot density of 750 drops (volume 9 pL) per inch. Next, the dried micropatterned substrate was subjected to a chemical vapor deposition step to grow uniform thin-film BDD, which satisfied the function of both working and counter electrodes. Silver was inkjet-printed to complete the sensor chip with a reference electrode. Scanning electron micrographs showed a closed BDD layer with a typical polycrystalline structure and sharp and well-defined edges. Very good homogeneity in diamond layer composition and a high boron content (∼2 × 10 21 atoms cm -3 ) was confirmed by Raman spectroscopy. Important electrochemical characteristics, including the width of the potential window (2.5 V) and double-layer capacitance (27 μF cm -2 ), were evaluated by cyclic voltammetry. Fast electron transfer kinetics was recognized for the [Ru(NH 3 ) 6 ] 3+/2+ redox marker due to the high doping level, while somewhat hindered kinetics was observed for the surface-sensitive [Fe(CN) 6 ] 3-/4- probe. Furthermore, the ability to electrochemically detect organic compounds of different structural motifs, such as glucose, ascorbic acid, uric acid, tyrosine, and dopamine, was successfully verified and compared with commercially available screen-printed BDD electrodes. The newly developed chip-based manufacture method enables the rapid prototyping of different small-scale electrode designs and BDD microstructures, which can lead to enhanced sensor performance with capability of repeated use.

Lab-On-A-Chip Devices, Microfluidics, and Nucleic Acid Amplification Techniques methods

In this work, we demonstrate an inexpensive method of prototyping microfluidics using a desktop injection molding machine. A centrifugal microfluidic device with a novel central filling mechanism was developed to demonstrate the technique. We overcame the limitations of desktop machines in replicating microfluidic features by variotherm heating and cooling the mold between 50 °C and 110 °C within two minutes. Variotherm heating enabled good replication of microfeatures, with a coefficient of variation averaging only 3.6% attained for the measured widths of 100 μm wide molded channels. Using this methodology, we produced functional polystyrene centrifugal microfluidic chips, capable of aliquoting fluids into 5.0 μL reaction chambers with 97.5% accuracy. We performed allele-specific loop-mediated isothermal amplification (AS-LAMP) reactions for genotyping CYP2C19 alleles on these chips. Readouts were generated using optical pH sensors integrated onto chips, by drop-casting sensor precursor solutions into reaction chambers before final chip assembly. Positive reactions could be discerned by decreases in pH sensor fluorescence, thresholded against negative control reactions lacking the primers for nucleic acid amplification and with time-to-results averaging 38 minutes. Variotherm desktop injection molding can enable researchers to prototype microfluidic devices more cost-effectively, in an iterative fashion, due to reduced costs of smaller, in-house molds. Designs prototyped this way can be directly translated to mass production, enhancing their commercialization potential and positive impacts.

The osseous tissue can be classified as a nanocomposite that encompasses a complex interweaving of organic and inorganic matrices. This intricate amalgamation consists of a collagen component and a mineral phase that are intricately arranged to form elaborate and perforated configurations. Hydroxyapatite, whether synthesized artificially or obtained from natural sources, has garnered considerable attention as a composite material in the field of bone tissue engineering due to its striking resemblance to bone in terms of structure and characteristics. Hydroxyapatite (HA) constitutes the predominant ceramic biomaterial for biomedical applications due to its ability to replicate the mineral composition of vertebrate bone. Nonetheless, it is noteworthy that the present biomimetic substance exhibits unfavorable mechanical characteristics, characterized by insufficient tensile and compressive strength, thus rendering it unsuitable for effective employment in the field of bone tissue engineering. Due to its beneficial attributes, hydroxyapatite (HA) is frequently employed in conjunction with various polymers and crosslinkers as composites to enhance mechanical properties and overall efficacy of implantable biomaterials engineered. The restoration of skeletal defects through the use of customized replacements is an effective way to replace damaged or lost bone structures. This method not only restores the bones' original functions but also reinstates their initial aesthetic appearance. The utilization of hydroxyapatite-polymer composites within 3D-printed grafts necessitates meticulous optimization of both mechanical and biological properties, in order to ensure their suitability for employment in medical devices. The utilization of 3D-printing technology represents an innovative approach in the manufacturing of HA-based scaffolds, which offers advantageous prospects for personalized bone regeneration. The expeditious prototyping method, with emphasis on the application of 3D printing, presents a viable approach in the development of bespoke prosthetic implants, grounded on healthcare data sets. 4D printing approach is an evolved form of 3D printing that utilizes programmable materials capable of altering the intended shape of printed structures, contingent upon single or dual stimulating factors. These factors include aspects such as pH level, temperature, humidity, crosslinking degree, and leaching factors.
Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
(© 2023 The Authors.)

Three-dimensional printing technology has been used for more than three decades in many industries, including the automotive and aerospace industries. So far, the use of this technology in medicine has been limited only to 3D printing of anatomical models for educational and training purposes, which is due to the insufficient functional properties of the materials used in the process. Only recent advances in the development of innovative materials have resulted in the flourishing of the use of 3D printing in medicine and pharmacy. Currently, additive manufacturing technology is widely used in clinical fields. Rapid development can be observed in the design of implants and prostheses, the creation of biomedical models tailored to the needs of the patient and the bioprinting of tissues and living scaffolds for regenerative medicine. The purpose of this review is to characterize the most popular 3D printing techniques.

The increasing demand for seafood is responsible for many environmental impacts, especially caused by aquaculture. Shrimp accounts for a substantial part of seafood production and therefore also for negative effects associated with it. This work aimed to develop a mushroom-based shrimp analogue with a texture similar to shrimp using the fruiting bodies of pink oyster mushroom ( Pleurotus djamor ) and lion's mane ( Hericium erinaceus ). Three flushes of pink oyster mushrooms and a first flush of lion's mane mushroom were analysed regarding their nutritional composition and whether they are suitable shrimp alternatives. The two mushrooms are rich in proteins (∼32% and ∼26% w/w for the first flush of pink oyster and lion's mane, respectively). The protein content of pink oyster mushroom decreased and the dietary fibre content increased across the different flushes. The antioxidants in the mushrooms were extracted using different methods, whereby aqueous extracts mostly excelled in terms of antioxidant activity. Hydrolysis confirmed the presence of conjugated p -coumaric acid in both mushrooms and possibly conjugated caffeic acid in pink oyster. Texture analysis results of the prototypes were close to the values of fried shrimp. However, although the sensory qualities of the final prototypes were perceived as similar to shrimp, further improvements in the recipe are necessary to make the prototypes indistinguishable from shrimp.
Competing Interests: None.
(© 2023 The Author(s).)

Three-dimensional (3D) printing, alternatively known as additive manufacturing, is a transformative technology enabling precise, customized, and efficient manufacturing of components with complex structures. It revolutionizes traditional processes, allowing rapid prototyping, cost-effective production, and intricate designs. The 3D printed graphene-based materials combine graphene's exceptional properties with additive manufacturing's versatility, offering precise control over intricate structures with enhanced functionalities. To gain comprehensive insights into the development of 3D printed graphene and graphene/polymer composites, this review delves into their intricate fabrication methods, unique structural attributes, and multifaceted applications across various domains. Recent advances in printable materials, apparatus characteristics, and printed structures of typical 3D printing techniques for graphene and graphene/polymer composites are addressed, including extrusion methods (direct ink writing and fused deposition modeling), photopolymerization strategies (stereolithography and digital light processing) and powder-based techniques. Multifunctional applications in energy storage, physical sensor, stretchable conductor, electromagnetic interference shielding and wave absorption, as well as bio-applications are highlighted. Despite significant advancements in 3D printed graphene and its polymer composites, innovative studies are still necessary to fully unlock their inherent capabilities.

In the laser sintering (LS) printing process, a printed part is formed by sintering layer-by-layer on the powder bed. Thus, it is necessary to consider the dimensional accuracy of the laser-sintered powder bed as an important evaluation index. In this paper, a generalized powder bed-size accuracy compensation model is proposed for non-crystalline thermoplastic polymer materials. Taking polyethersulfone (PES) material as an example, the main factors influencing powder bed dimensional accuracy during LS printing are modeled and analyzed experimentally in this study, including four important factors: laser reference deviation, temperature deviation, density deviation, and secondary sintering deviation. In this study, CX_A200 LS equipment is used for prototyping and verification, a 3D scanning method is used to measure the printed parts, and the measurement results are digitally compared and analyzed. On this basis, the relationship of each influencing factor in the proposed compensation model is determined experimentally, and the experimental results demonstrate that the proposed compensation model is approximately 95% effective in terms of correcting the deviation of powder bed dimensional accuracy.

Animals, Staining and Labeling, In Situ Hybridization, Antibodies, Zebrafish, and Embryo, Nonmammalian metabolism

Whole mount zebrafish antibody staining (ABS) is a common staining technique used to localize protein information in a zebrafish embryo or larva. Like most biological assays, the whole mount zebrafish ABS is still largely conducted manually through labor intensive and time-consuming steps which affect both consistency and throughput of the assay. In this work, we develop a milli fluidic device that can automatically trap and immobilize the fixed chorion-less zebrafish embryos for the whole mount ABS. With just a single loading step, the zebrafish embryos can be trapped by the milli fluidic device through a chaotic hydrodynamic trapping process. Moreover, a consistent body orientation (i.e., head point inward) for the trapped zebrafish embryos can be achieved without additional orientation adjustment device. Furthermore, we employed a consumer-grade SLA 3D printer assisted method for device prototyping which is ideal for labs with limited budgets. Notably, the milli fluidic device has enabled the optimization and successful implementation of whole mount zebrafish Caspase-3 ABS. We demonstrated our device can accelerate the overall procedure by reducing at least 50% of washing time in the standard well-plate-based manual procedure. Also, the consistency is improved, and manual steps are reduced using the milli fluidic device. This work fills the gap in the milli fluidic application for whole mount zebrafish immunohistochemistry. We hope the device can be accepted by the zebrafish community and be used for other types of whole mount zebrafish ABS procedures or expanded to more complicated in situ hybridization (ISH) procedure.
(© 2023. The Author(s).)

The brain-storm of designing low-cost and commercialized eutectic electrolytes for zinc (Zn)-based electrochemical energy storage (ZEES) remains unresolved and attractive, especially when implementing it at low temperatures. Here, we report an appealing layout of advancing chlorine-functionalized eutectic (Cl-FE) electrolytes via exploiting Cl anion-induced eutectic interaction with Zn acetate solutions. This novel eutectic liquid shows high affinity to collaborate with 1,3-dioxolane (DOL) and is prone to constitute Cl-FE/DOL-based electrolytes with a unique inner/outer eutectic solvation sheath for the better regulation of Zn-solvating neighboring and reconstruction of H-bonding. The side reactions are effectively restricted on Zn anodes and a high Coulombic efficiency of 99.5 % can be achieved over 1000 cycles at -20 °C with Zn//Cu setups. By prototyping scale-up Zn-ion pouch cells using the optimal eutectic liquid of 3ZnOAc 1.2 Cl 1.8 -DOL, we obtain improved electrochemical properties at -20 °C with a high capacitance of 203.9 F g -1 at 0.02 A g -1 in a range of 0.20-1.90 V and long-term cycling ability with 95.3 % capacitance retention at 0.2 A g -1 over 3,000 cycles. Overall, the proposal of ideal Cl-FE/DOL-based electrolytes guides the design of sub-zero and endurable aqueous ZEES devices and beyond.
(© 2023 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

Background: Numerous studies describe the popularity and usefulness of parenting programs. In particular, parenting programs are generally viewed as effective for supporting parents' mental well-being during key transition periods. However, the evidence base for fathers is limited owing to their lack of involvement in parenting programs and scarcity of tailored support.
Objective: This paper aimed to describe the co-design process for a universal digital intervention for fathers (fatherli) and the outline of a logic model with its expected outcomes.
Methods: Following established guidelines for co-designing and developing complex interventions, we conducted a nonsystematic review of the available literature to gather key information, developed market surveys to assess fathers' needs and interests, consulted with key stakeholders to obtain expert opinions, and engaged in a rapid iterative prototyping process with app developers. Each step was summarized, and the information was collated and integrated to inform a logic model and the features of the resulting intervention.
Results: The steps in the co-design process confirmed a need for and interest in a digital intervention for fathers. In response to this finding, fatherli was developed, consisting of 5 key features: a discussion forum for anyone to post information about various topics (the forum), a socializing platform for fathers to create and engage with others in small groups about topics or points of shared interest (dad hub), a tool for fathers to find other fathers with shared interests or within the same geographic location (dad finder), a resource for fathers to access up-to-date information about topics that interest them (dad wiki), and a portal to book sessions with coaches who specialize in different topics (dad coaching space). The evidence-based logic model proposes that if fatherli is successfully implemented, important outcomes such as increased parental efficacy and mental health help-seeking behaviors may be observed.
Conclusions: We documented the co-design and development process of fatherli, which confirmed that it is possible to use input from end users and experts, integrated with theory and research evidence, to create suitable digital well-being interventions for fathers. In general, the key findings suggest that an app that facilitates connection, communication, and psychoeducation may appeal to fathers. Further studies will now focus on acceptability, feasibility, and effectiveness. Feedback gathered during pilot-testing will inform any further developments in the app to increase its applicability to fathers and its usability.
(©Shaun Liverpool, Mia Eisenstadt, Aoife Mulligan Smith, Sofia Kozhevnikova. Originally published in JMIR Formative Research (https://formative.jmir.org), 14.08.2023.)

Acoustic hologram lenses were typically produced by high-resolution 3D printing methods, such as stereolithography (SLA) printing. However, SLA printing of thin, plate-shaped lens structures has major limitations including vulnerability to deformation during photo-curing and limited control of acoustic impedance. To overcome these limitations, we demonstrated a nanoparticle epoxy composite (NPEC) molding technique, and we tested its feasibility for acoustic hologram lens fabrication. The characterized acoustic impedance of the 22.5% NPEC was 4.64 MRayl which is 55% higher than the clear photopolymer (2.99 MRayl) used by SLA. Simulations demonstrated that the improved pressure transmission by the higher acoustic impedance of the NPEC resulted in 21% higher pressure amplitude in the region of interest (ROI, -6 dB pressure amplitude pixels) than the photopolymer. This improvement was experimentally demonstrated after prototyping NPEC lenses through a molding process. The NPEC lens showed no significant deformation and 72% lower thickness profile errors than the photopolymer which otherwise experienced deformed edges due to thermal bending. Beam mapping results using the NPEC lens validated the predicted improvement, demonstrating 24% increased pressure amplitude on average and 10% improved structural similarity with the simulated pressure pattern compared to the photopolymer lens. This method can be used for acoustic hologram lens applications with improved pressure output and accurate pressure field formation.

Binder jetting is a highly productive additive manufacturing (AM) method for porous parts. Due to its cost-effectiveness, it is used for large components and quantities ranging from prototyping to series production. Post-processing steps like sintering or infiltration are common in several applications to achieve high density and strength. This work investigates how 3D-printed sand molds can be infiltrated with epoxy resins without vacuum assistance to produce high-strength molds for thermoforming applications. Specimens 3D-printed from different sand types are infiltrated with resins of different viscosity and analyzed for infiltration velocity and depth. The infiltration velocities corresponded well with the correlation described in Washburn's equation: The resins' viscosities and the saturation level were decisive. Amongst the investigated sand types commonly used in foundries, sand type GS19 was found most suitable for infiltration. However, the sand type proved to be a less relevant influencing factor than the resins' viscosities and quantities applied. Infiltration of topology-optimized 3D-printed sand tools up to a wall thickness of 20 mm for thermoforming applications was found to be feasible.

The application of three-dimensional printing technology in the medical field has great potential for bone defect repair, especially personalized and biological repair. As a green manufacturing process that does not involve liquefication through heating, low-temperature deposition manufacturing (LDM) is a promising type of rapid prototyping manufacturing and has been widely used to fabricate scaffolds in bone tissue engineering. The scaffolds fabricated by LDM have a multi-scale controllable pore structure and interconnected micropores, which are beneficial for the repair of bone defects. At the same time, different types of cells or bioactive factor can be integrated into three-dimensional structural scaffolds through LDM. Herein, we introduced LDM technology and summarize its applications in bone tissue engineering. We divide the scaffolds into four categories according to the skeleton materials and discuss the performance and limitations of the scaffolds. The ideas presented in this review have prospects in the development and application of LDM scaffolds.
Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.
(Copyright © 2023 Sun, Wang, Huang, Liu, Zhang, Zhang, Wang and Li.)

Stereolithography, Microtechnology, Lab-On-A-Chip Devices, Microphysiological Systems, and Printing, Three-Dimensional

Organs-on-a-chip, or OoCs, are microfluidic tissue culture devices with micro-scaled architectures that repeatedly achieve biomimicry of biological phenomena. They are well positioned to become the primary pre-clinical testing modality as they possess high translational value. Current methods of fabrication have facilitated the development of many custom OoCs that have generated promising results. However, the reliance on microfabrication and soft lithographic fabrication techniques has limited their prototyping turnover rate and scalability. Additive manufacturing, known commonly as 3D printing, shows promise to expedite this prototyping process, while also making fabrication easier and more reproducible. We briefly introduce common 3D printing modalities before identifying two sub-types of vat photopolymerization - stereolithography (SLA) and digital light processing (DLP) - as the most advantageous fabrication methods for the future of OoC development. We then outline the motivations for shifting to 3D printing, the requirements for 3D printed OoCs to be competitive with the current state of the art, and several considerations for achieving successful 3D printed OoC devices touching on design and fabrication techniques, including a survey of commercial and custom 3D printers and resins. In all, we aim to form a guide for the end-user to facilitate the in-house generation of 3D printed OoCs, along with the future translation of these important devices.

Advances in the instrumentation and materials for photopolymerization 3D printing aided the use of this powerful technique in the fabrication of microfluidic devices. The costs of printers and supplies have been reduced to the point where this technique becomes attractive for prototyping microfluidic systems with good resolution. With all the development of multi-material 3D printers, most of the microfluidic devices prepared by photopolymerization 3D printing are based on a single substrate material. We developed a digital light processing multi-material 3D printer where two or more resins can be used to prepare complex objects and functional microfluidic devices. The printer is based on a vat inclination system and embedded peristaltic pumps that allow the injection and removal of resins and cleaning step between material changes. Although we have built the whole system, the modification can be incorporated into commercially available printers. Using a high-resolution projector, microfluidic channels as narrow as 43 μm were obtained. We demonstrate the printing of multi-material objects containing flexible, rigid, water-soluble, fluorescent, phosphorescent, and conductive (containing PEDOT or copper nanoparticles) resins. An example of a microfluidic chip containing electrodes for electrochemical detection is also presented.

The transfer from batch to flow chemistry is often based on commercial microfluidic equipment, such as costly complete reactor systems, which cannot be easily tailored to specific requirements of technologies such as DNA-encoded library technology (DELT), in particular for increasingly important photochemical reactions. Customized photoreactor concepts using rapid prototyping technology offer a modular, flexible, and affordable design that allows for adaptation to various applications. In order to validate the prototype reactors, a photochemical pinacol coupling reaction at 368 nm was conducted to demonstrate the transfer from batch to flow chemistry. The conversion rates were optimized by adapting the design parameters of the microfluidic flow photoreactor module. Subsequently, the photoreactor module has been extended to an application with DNA-tagged substrates by switching to LEDs with a wavelength of 454 nm. The successful recovery of DNA confirmed the feasibility of the modular-designed flow photo reactor. This collaborative approach holds enormous potential to drive the development of DELT and flow equipment design.
Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.
(Copyright © 2023 Dinter, Willems, Nissalk, Hastürk, Brunschweiger and Kockmann.)

Objective: To describe the Cleft Recurrence Risk (Cleft RR) App, designed to be used on genetic counseling for cleft lip and/ or palate.
Design: A validation study, single cohort.
Setting: Tertiary care children's Hospital.
Patients, Participants: The manual obtained the results of 100 cases undergoing genetic counseling at the cleft lip and palate treatment center.
Interventions: The application for genetic counseling for cleft lip and/ or palate is designed to calculate quickly the recurrence risk considering the ancestry, cleft type, sex, and family history and thus encourage the implementation of genetic counseling in cleft lip and palate centers around the world.
Main Outcome Measure(s): The data were submitted to the Bland-Altman statistics.
Results: After defining parameters the application development follows the steps: development, prototyping, and documentation. The validation of the calculated data was performed by comparing the results of 100 cases undergoing genetic counseling at the cleft lip and palate treatment center obtained by the manual method with the results obtained by the mobile app method; the data were submitted to the Bland-Altman statistics and a high concordance was found.
Conclusions: The mobile app for use by healthcare professionals proved to be simple to use, easy to apply, and provided accurate results. Cleft Recurrence Risk is an application for smartphones developed for genetic counseling in cleft lip and palate, supplementary use by health professionals, and should not replace professional performance.

This study proposes a design approach and the development of a low-power planar biped robot named YU-Bibot. The kinematic structure of the robot consists of six independently driven axes, and it weighs approximately 20 kg. Based on biomimetics, the robot dimensions were selected as the average anthropomorphic dimensions of the human lower extremities. The optimization of the mechanical design and actuator selection of the robot was based on the results of parametric simulations. The natural human walking gait was mimicked as a walking pattern in these simulations. As a result of the optimization, a low power-to-weight ratio of 30 W/kg was obtained. The drive system of the robot joints consists of servo-controlled brushless DC motors with reduction gears and additional bevel gears at the knee and ankle joints. The robot features spring-supported knee and ankle joints that counteract the robot's weight and compensate for the backlash present in these joints. The robot is constrained to move only in the sagittal plane by using a lateral support structure. The robot's feet are equipped with low-cost, force-sensitive resistor (FSR)-type sensors for monitoring ground contact and zero-moment point (ZMP) criterion. The experimental results indicate that the proposed robot mechanism can follow the posture commands accurately and demonstrate locomotion at moderate stability. The proposed parametric natural gait simulation-based design approach and the resulting biped robot design with a low power/weight ratio are the main contributions of this study.