articles+ search results

2,655 articles+ results

1 - 100
View results as:
Number of results to display per page

1. The role of additive technologies in the prototyping issues of design [2018]

  • Monica Carfagni, Lorenzo Fiorineschi, Rocco Furferi, Lapo Governi, and Federico Rotini
  • Rapid Prototyping Journal, 2018, Vol. 24, Issue 7, pp. 1101-1116.

2. Rapid prototyping eddy current sensors using 3D printing [2018]

  • Bo Li, Lifan Meng, Hongyu Wang, Jing Li, and Chunmei Liu
  • Rapid Prototyping Journal, 2018, Vol. 24, Issue 1, pp. 106-113.

3. Direct global editing of STL mesh model for product design and rapid prototyping [2017]

  • N. Adhikary and B. Gurumoorthy
  • Rapid Prototyping Journal, 2017, Vol. 23, Issue 4, pp. 781-795.

4. Rapid prototyping assisted fabrication of customized surgical guides in mandibular distraction osteogenesis: a case report [2017]

  • Sandeep W. Dahake, Abhaykumar M. Kuthe, Jitendra Chawla, and Mahesh B. Mawale
  • Rapid Prototyping Journal, 2017, Vol. 23, Issue 3, pp. 602-610.

5. Applications of medical rapid prototyping assisted customized surgical guides in complex surgeries [2016]

  • Sandeep W. Dahake, Abhaykumar M. Kuthe, Mahesh B. Mawale, and Ashutosh D. Bagde
  • Rapid Prototyping Journal, 2016, Vol. 22, Issue 6, pp. 934-946.

6. Mechanical properties of urethane diacrylate/bamboo powder composite fabricated by rapid prototyping system [2016]

  • Shih-Hsuan Chiu, Ivan Ivan, Cheng-Lung Wu, Kun-Ting Chen, Sigit Tri Wicaksono, and Hitoshi Takagi
  • Rapid Prototyping Journal, 2016, Vol. 22, Issue 4, pp. 676-683.

7. Iterative prototyping of strategy implementation workshop design [2018]

  • Anders Kryger
  • Journal of Strategy and Management, 2018, Vol. 11, Issue 2, pp. 166-183.

8. The use of rapid prototyping in the joining of fractured historical silver object [2018]

  • Maria Luiza Seixas, Paulo Santos Assis, João Cura D’Ars Figueiredo Jr., Maria Aparecida Pinto, and Daniella Gualberto Caldeira Paula
  • Rapid Prototyping Journal, 2018, Vol. 24, Issue 3, pp. 532-538.

9. Evaluation of thiol-ene photo-curable resins using in rapid prototyping [2016]

  • Jian Zhou, Qiuyu Zhang, Hepeng Zhang, Jiaojun Tan, Shaojie Chen, Qing Liu, Mingliang Ma, and Tiejun Xin
  • Rapid Prototyping Journal, 2016, Vol. 22, Issue 3, pp. 465-473.

10. Rapid prototyping in the intervertebral implant design process [2015]

  • Rapid Prototyping Journal, 2015, Vol. 21, Issue 6, pp. 735-746.

11. Global adaptive slicing of NURBS based sculptured surface for minimum texture error in rapid prototyping [2015]

  • Rapid Prototyping Journal, 2015, Vol. 21, Issue 6, pp. 649-661.

12. Application of curved layer manufacturing for preservation of randomly located minute critical surface features in rapid prototyping [2015]

  • Rapid Prototyping Journal, 2015, Vol. 21, Issue 6, pp. 725-734.

13. Application of improved complex proportional assessment (COPRAS) method for rapid prototyping system selection [2015]

  • Rapid Prototyping Journal, 2015, Vol. 21, Issue 6, pp. 671-674.

14. Design and prototyping of the novel axial flux-switching permanent-magnet motor [2018]

  • Javad Rahmani Fard and Mohammad Ardebili
  • COMPEL -The international journal for computation and mathematics in electrical and electronic engineering, 2018, Vol. 37, Issue 2, pp. 890-910.

15. Analysis, optimization and prototyping of a parallel RCM mechanism of a surgical robot for craniotomy surgery [2018]

  • Mohammadreza Dehghani, Majid Mohammadi Moghadam, and Pourya Torabi
  • Industrial Robot: An International Journal, 2018, Vol. 45, Issue 1, pp. 78-88.

16. Combining rapid prototyping techniques in mechanical engineering and electronics for realization of a variable capacitor [2014]

  • Stojanović Goran, Mandić Vesna, Ćurčić Milan, Vasiljević Dragana, Kisić Milica, and Radosavljević Nikola
  • Rapid Prototyping Journal, 2014, Vol. 20, Issue 2, pp. 115-120.

17. Rapid prototyping-assisted fabrication of the customized metatarsophalangeal joint implant (SamKu) : A case report [2014]

  • C. Raghatate Sameer, M. Kuthe Abhaykumar, R. Deshmukh Tushar, and W. Dahake Sandeep
  • Rapid Prototyping Journal, 2014, Vol. 20, Issue 4, pp. 270-279.

18. Basics and applications of rapid prototyping medical models [2014]

  • Negi Sushant, Dhiman Suresh, and Kumar Sharma Rajesh
  • Rapid Prototyping Journal, 2014, Vol. 20, Issue 3, pp. 256-267.

19. State-of-the-art in empirical modelling of rapid prototyping processes [2014]

  • Garg A., Tai K., and Savalani M.M.
  • Rapid Prototyping Journal, 2014, Vol. 20, Issue 2, pp. 164-178.

20. Development of SVM rapid prototyping for scaffold fabrication [2014]

  • Phattanaphibul Thittikorn, Koomsap Pisut, Idram Irwansyah, and Nachaisit Suchart
  • Rapid Prototyping Journal, 2014, Vol. 20, Issue 2, pp. 90-104.

21. From “ethics of the eye” to “ethics of the hand” by collaborative prototyping [2014]

  • Christiansen Ellen
  • Journal of Information, Communication and Ethics in Society, 2014, Vol. 12, Issue 1, pp. 3-9.

22. Feasibility study on accurate rapid prototyping for human hand bones and affiliated artery [2017]

  • Dafeng Ji, Peng Wang, Xinhua Zhang, and Xinrong Chen
  • Rapid Prototyping Journal, 2017, Vol. 23, Issue 1, pp. 96-100.

23. Investigating the friction coefficient in functionally graded rapid prototyping of Al–Al2O3 composite prepared by fused deposition modelling [2017]

  • Rupinder Singh and Sunpreet Singh
  • Assembly Automation, 2017, Vol. 37, Issue 2, pp. 154-161.

24. Design and manufacture methods of rapid prototyping wind‐tunnel models based on photopolymer‐resin [2013]

  • Dang‐guo Yang, Yan Sun, Zheng‐yu Zhang, Chao Wang, and Wei‐jun Zhu
  • Rapid Prototyping Journal, 2013, Vol. 19, Issue 1, pp. 20-27.

25. Remotely Accessible Rapid Prototyping Laboratory: design and implementation framework [2012]

  • Fidan Ismail
  • Rapid Prototyping Journal, 2012, Vol. 18, Issue 5, pp. 344-352.

26. Dynamic crack propagation and arrest in rapid prototyping material [2012]

  • Ibrahim Umar and Irfan Mohammad A.
  • Rapid Prototyping Journal, 2012, Vol. 18, Issue 2, pp. 154-160.

27. The use of rapid prototyping techniques (RPT) to manufacture micro channels suitable for high operation pressures and μPIV [2016]

  • Rapid Prototyping Journal, 2016, Vol. 22, Issue 1, pp. 67-76.

28. Prototyping, customer involvement, and speed of information dissemination in new product success [2016]

  • Siohong Tih, Kok-Kee Wong, Gary S. Lynn, and Richard R. Reilly
  • Journal of Business & Industrial Marketing, 2016, Vol. 31, Issue 4, pp. 437-448.

29. Quantitative assessments of geometric errors for rapid prototyping in medical applications [2012]

  • Arrieta Cristobal, Uribe Sergio, Ramos‐Grez Jorge, Vargas Alex, Irarrazaval Pablo, Parot Vicente, and Tejos Cristian
  • Rapid Prototyping Journal, 2012, Vol. 18, Issue 6, pp. 431-442.

30. The use of virtual prototyping for hazard identification in the early design stage [2012]

  • King Chun Chan, Li Heng, and Skitmore Martin
  • Construction Innovation, 2012, Vol. 12, Issue 1, pp. 29-42.

31. Rapid prototyping process selection using multi criteria decision making considering environmental criteria and its decision support system [2016]

  • Vimal KEK, Vinodh S., Brajesh P., and Muralidharan R.
  • Rapid Prototyping Journal, 2016, Vol. 22, Issue 2, pp. 225-250.

32. Investigation of electroless nickel plating on rapid prototyping material of acrylic resin [2016]

  • Rapid Prototyping Journal, 2016, Vol. 22, Issue 1, pp. 162-169.

33. The use of virtual prototyping to rehearse the sequence of construction work involving mobile cranes [2012]

  • Li Heng, Chan Neo K.Y., and Skitmore Martin
  • Construction Innovation, 2012, Vol. 12, Issue 4, pp. 429-446.

34. Statistical modeling and minimization of form error in SLS prototyping [2012]

  • Senthilkumaran K., Pandey P.M., and Rao P.V.M.
  • Rapid Prototyping Journal, 2012, Vol. 18, Issue 1, pp. 38-48.

35. Rapid prototyping assisted fabrication of the customised temporomandibular joint implant: a case report [2011]

  • Deshmukh T.R., Kuthe A.M., Chaware S.M., Vaibhav B., and Ingole D.S.
  • Rapid Prototyping Journal, 2011, Vol. 17, Issue 5, pp. 362-368.

36. Application of direct bonded copper substrates for prototyping of power electronic modules [2016]

  • Circuit World, 2016, Vol. 42, Issue 1, pp. 23-31.

37. Rapid prototyping – a technology transfer approach for development of rapid tooling [2009]

  • Sahebrao Ingole Dilip, Madhusudan Kuthe Abhay, Thakare Shashank B., and Talankar Amol S.
  • Rapid Prototyping Journal, 2009, Vol. 15, Issue 4, pp. 280-290.

38. Regulating complex geometries using layered depth‐normal images for rapid prototyping and manufacturing [2013]

  • Rapid Prototyping Journal, 2013, Vol. 19, Issue 4, pp. 253-268.

39. A study of photomask correction method in area‐forming rapid prototyping system [2008]

  • Chiu Shih‐Hsuan, Pong Sheng‐Hong, Wu Dien‐Chi, and Lin Chien‐Hung
  • Rapid Prototyping Journal, 2008, Vol. 14, Issue 5, pp. 285-292.

40. 3D restitution, restoration and prototyping of a medieval damaged skull [2008]

  • Fantini Massimiliano, de Crescenzio Francesca, Persiani Franco, Benazzi Stefano, and Gruppioni Giorgio
  • Rapid Prototyping Journal, 2008, Vol. 14, Issue 5, pp. 318-324.

41. Distributed rapid prototyping – a framework for Internet prototyping and manufacturing [2001]

  • Tay Francis E.H., Khanal Yadav P., Kuen Kwong Kwok, and Cheng Tan Kim
  • Integrated Manufacturing Systems, 2001, Vol. 12, Issue 6, pp. 409-415.

42. Investigation of an electrophotography based rapid prototyping technology [2003]

  • Kumar Ashok V. and Dutta Anirban
  • Rapid Prototyping Journal, 2003, Vol. 9, Issue 2, pp. 95-103.

43. What and whose values in design? : The challenge of incorporating ethics into collaborative prototyping [2014]

  • Gerdes Anne
  • Journal of Information, Communication and Ethics in Society, 2014, Vol. 12, Issue 1, pp. 18-20.

44. Synopsys Ships More Than 3,000 HAPS-80 Prototyping Systems [2019]

  • PR Newswire Asia, November 26, 2019, 2pp
Abstract
HAPS-80's High Performance and Cost Effectiveness Has Driven Adoption by More Than 100 Companies MOUNTAIN VIEW, Calif., Nov. 27, 2019 /PRNewswire/ --Synopsys, Inc.(Nasdaq: SNPS) today announced that it has shipped more than 3,000 HAPS®-80 prototyping systems since its introduction...

45. Alion Opens New Prototyping, Integration, and Acquisition Center to Support Naval Air Systems Command [2019]

  • PR Newswire (USA), November 25, 2019, 2pp
Abstract
WASHINGTON, Nov. 25, 2019 /PRNewswire/ -- Alion Science and Technology, a global industry leader in the design and delivery of complex engineering solutions for Defense and Intelligence agencies, held an open house to celebrate the opening of its new Prototyping, Integration, and Acquisition Center supporting the Naval Air Systems (NAVAIR) Command at Patuxent River (PAX River)...

46. Rapid prototyping of porcelain products by layer‐wise slurry deposition (LSD) and direct laser sintering [2012]

  • Tian Xiaoyong, Li Dichen, and Heinrich Juergen G.
  • Rapid Prototyping Journal, 2012, Vol. 18, Issue 5, pp. 362-373.

47. A dexel‐based virtual prototyping system for product development [2002]

  • Choi S.H. and Chan A.M.M.
  • Rapid Prototyping Journal, 2002, Vol. 8, Issue 5, pp. 300-314.

48. Visualisation of rapid prototyping [2001]

  • Choi S.H. and Samavedam S.
  • Rapid Prototyping Journal, 2001, Vol. 7, Issue 2, pp. 99-114.

49. Development of a web‐based tele‐manufacturing service system for rapid prototyping [2006]

  • Liu Xiao‐guang, Jin Ye, and Xi Jun‐tong
  • Journal of Manufacturing Technology Management, 2006, Vol. 17, Issue 3, pp. 303-314.

50. HyCon: virtual prototyping in hybrid concrete construction frame design [2006]

  • Zhang X., Goulding J.S., Sexton M.G., Aouad G., and Kagioglou M.
  • Construction Innovation, 2006, Vol. 6, Issue 1, pp. 47-60.

51. Design for medical rapid prototyping of cranioplasty implants [2003]

  • Hieu L.C., Bohez E., Vander Sloten J., Phien H.N., Vatcharaporn E., Binh P.H., An P.V., and Oris P.
  • Rapid Prototyping Journal, 2003, Vol. 9, Issue 3, pp. 175-186.

52. The customized mandible substitute based on rapid prototyping [2003]

  • Yaxiong Liu, Dichen Li, Bingheng Lu, Sanhu He, and Gang Li
  • Rapid Prototyping Journal, 2003, Vol. 9, Issue 3, pp. 167-174.

53. Rapid prototyping for treatment of canine limb deformities [2003]

  • Harrysson Ola L.A., Cormier Denis R., Marcellin‐Little Denis J., and Jajal Ketan
  • Rapid Prototyping Journal, 2003, Vol. 9, Issue 1, pp. 37-42.

54. A study on effects of process parameters in rapid freeze prototyping [2003]

  • Bryant Frances D., Sui Guanghua, and Leu Ming C.
  • Rapid Prototyping Journal, 2003, Vol. 9, Issue 1, pp. 19-23.

55. Smoothing STL files by Max‐Fit biarc curves for rapid prototyping [2000]

  • Koc Bahattin, Ma Yawei, and Lee Yuan‐Shin
  • Rapid Prototyping Journal, 2000, Vol. 6, Issue 3, pp. 186-205.

56. Rapid prototyping for architectural models [2002]

  • Gibson Ian, Kvan Thomas, and Wai Ming Ling
  • Rapid Prototyping Journal, 2002, Vol. 8, Issue 2, pp. 91-95.

57. The role of rapid prototyping in the product development process: A case study on the ergonomic factors of handheld video games [2002]

  • Lopez Samuel M. and Wright Paul K.
  • Rapid Prototyping Journal, 2002, Vol. 8, Issue 2, pp. 116-125.

58. Prosthetic sockets fabrication using rapid prototyping technology [2002]

  • Ng P., Lee P.S.V., and Goh J.C.H.
  • Rapid Prototyping Journal, 2002, Vol. 8, Issue 1, pp. 53-59.

59. Algorithms for accurate rapid prototyping replication of cancellous bone voxel maps [2002]

  • Sisias G., Phillips R., Dobson C.A., Fagan M.J., and Langton C.M.
  • Rapid Prototyping Journal, 2002, Vol. 8, Issue 1, pp. 6-24.

60. Rapid prototyping and art [1999]

  • Rees Michael
  • Rapid Prototyping Journal, 1999, Vol. 5, Issue 4, pp. 154-167.

61. Standards for the rapid prototyping industry [1999]

  • Jurrens Kevin K.
  • Rapid Prototyping Journal, 1999, Vol. 5, Issue 4, pp. 169-178.

62. An integrated design approach for rapid product development : A case study through application of reverse engineering, re‐engineering and fast prototyping tools [2013]

  • Ali Fahraz, Chowdary Boppana V., and Gonzales Luis
  • Journal of Engineering, Design and Technology, 2013, Vol. 11, Issue 2, pp. 178-189.

63. Garment prototyping based on scalable virtual female bodies [2013]

  • Chaw Hlaing Ei, Krzywinski Sybille, and Roedel Hartmut
  • International Journal of Clothing Science and Technology, 2013, Vol. 25, Issue 3, pp. 184-197.

64. Improving the process of making rapid prototyping models from medical ultrasound images [2012]

  • Vaezi Mohammad, Kai Chua Chee, and Meng Chou Siaw
  • Rapid Prototyping Journal, 2012, Vol. 18, Issue 4, pp. 287-298.

65. Additive manufacturing: rapid prototyping comes of age [2012]

  • Campbell Ian, Bourell David, and Gibson Ian
  • Rapid Prototyping Journal, 2012, Vol. 18, Issue 4, pp. 255-258.

66. A study on the fabrication method of removable partial denture framework by computer‐aided design and rapid prototyping [2012]

  • Wu Jiang, Wang Xiaobo, Zhao Xianghui, Zhang Chunbao, and Gao Bo
  • Rapid Prototyping Journal, 2012, Vol. 18, Issue 4, pp. 318-323.

67. Path planning in the Proteus rapid prototyping system [2001]

  • Tarabanis Konstantinos A.
  • Rapid Prototyping Journal, 2001, Vol. 7, Issue 5, pp. 241-252.

68. Rapid prototyping for direct manufacture [2001]

  • Hopkinson Neil and Dickens Phill
  • Rapid Prototyping Journal, 2001, Vol. 7, Issue 4, pp. 197-202.

69. Rapid prototyping integrated systems [2001]

  • Onuh S.O.
  • Rapid Prototyping Journal, 2001, Vol. 7, Issue 4, pp. 220-223.

70. An easy rapid prototyping technique with point cloud data [2001]

  • Pal Pralay
  • Rapid Prototyping Journal, 2001, Vol. 7, Issue 2, pp. 82-90.

71. A comparison of rapid prototyping techniques used for wind tunnel model fabrication [1998]

  • Chuk Raymond N. and Thomson Vincent J.
  • Rapid Prototyping Journal, 1998, Vol. 4, Issue 4, pp. 185-196.

72. Piezoelectric ceramics and composites via rapid prototyping techniques [1998]

  • Bandyopadhyay A., Panda R.K., McNulty T.F., Mohammadi F., Danforth S.C., and Safari A.
  • Rapid Prototyping Journal, 1998, Vol. 4, Issue 1, pp. 37-49.

73. Options for additive rapid prototyping methods (3D printing) in MEMS technology. [2014]

  • Lifton Victor, Lifton Gregory, Simon Steve, Campbell R. Ian, and Bourell David
  • Rapid Prototyping Journal, 2014, Vol. 20, Issue 5.

74. A Method to Represent Heterogeneous Materials for Rapid Prototyping – The Matryoshka Approach [2014]

  • Lei Shuangyan, Frank Matthew Charles, Anderson Donald D., Brown Thomas D., Campbell R. Ian, and Bourell David
  • Rapid Prototyping Journal, 2014, Vol. 20, Issue 5.

75. Rapid prototyping gains speed, volume and precision [2000]

  • Kochan Anna
  • Assembly Automation, 2000, Vol. 20, Issue 4, pp. 295-299.

76. Rapid prototyping of small size objects [2000]

  • Bertsch Arnaud, Bernhard Paul, Vogt Christian, and Renaud Philippe
  • Rapid Prototyping Journal, 2000, Vol. 6, Issue 4, pp. 259-266.

77. Surface macro‐texture design for rapid prototyping [2000]

  • Jee Haeseong and Sachs Emanuel
  • Rapid Prototyping Journal, 2000, Vol. 6, Issue 1, pp. 50-60.

78. Facial prosthetic model fabrication using rapid prototyping tools [2000]

  • Chee Kai Chua, Siaw Meng Chou, Sin Ching Lin, Seng Teik Lee, and Chit Aung Saw
  • Integrated Manufacturing Systems, 2000, Vol. 11, Issue 1, pp. 42-53.

79. Integrating rapid prototyping into the engineering curriculum ‐ a case study [1997]

  • Helge Bøhn Jan
  • Rapid Prototyping Journal, 1997, Vol. 3, Issue 1, pp. 32-37.

80. Modelling, prototyping, and verifying concurrent and distributed applications using object‐oriented Petri nets [2002]

  • Češka Milan, Janoušek Vladimír, and Vojnar Tomá&scaron
  • Kybernetes, 2002, Vol. 31, Issue 9/10, pp. 1289-1299.

81. Integrated rapid prototyping and rapid tooling (IRPRT) [2002]

  • Folkestad James E. and Johnson Russell L.
  • Integrated Manufacturing Systems, 2002, Vol. 13, Issue 2, pp. 97-103.

82. The business of rapid prototyping [1999]

  • Smith Preston G.
  • Rapid Prototyping Journal, 1999, Vol. 5, Issue 4, pp. 179-186.

83. Low cost prototyping of multichip modules ‐ the European INCO‐Copernicus project [1999]

  • Illyefalvi‐Vitéz Zsolt, Vervaet Alfons, Van Calster Andr&eacute, Sinnadurai Nihal, Hrovat Marko, Svasta Paul, Tóth Endre, Belavic Darko, Mihai Ionescu Radu, and Dennehy William
  • Microelectronics International: An International Journal, 1999, Vol. 16, Issue 2, pp. 13-19.

84. Considerations and selection of optimal orientation for different rapid prototyping systems [1999]

  • Xu F., Loh H.T., and Wong Y.S.
  • Rapid Prototyping Journal, 1999, Vol. 5, Issue 2, pp. 54-60.

85. A discussion on the concept of a flexible rapid prototyping cell [1996]

  • Gibson Ian
  • Rapid Prototyping Journal, 1996, Vol. 2, Issue 2, pp. 32-38.

86. Intelligent rapid prototyping with fused deposition modelling [1996]

  • Masood Syed H.
  • Rapid Prototyping Journal, 1996, Vol. 2, Issue 1, pp. 24-33.

87. Virtual prototyping for customized product development [1998]

  • Tseng Mitchell M., Jiao Jianxin, and Su Chuan‐Jun
  • Integrated Manufacturing Systems, 1998, Vol. 9, Issue 6, pp. 334-343.

88. Motion compensation for five‐axis rapid prototyping system [1998]

  • Ng Peow, Fang Wei, Li Bo, Zou Jiguo, and Gong Haiqing
  • Rapid Prototyping Journal, 1998, Vol. 4, Issue 2, pp. 68-76.

89. How rapid prototyping can assist in the development of new orthopaedic products ‐ a case study [1995]

  • Jamieson R., Holmer B., and Ashby A.
  • Rapid Prototyping Journal, 1995, Vol. 1, Issue 4, pp. 38-41.

90. Rapid prototyping: current technology and future potential [1995]

  • Hull Charles, Feygin Michael, Baron Yehudah, Sanders Roy, Sachs Emanuel, Lightman Allan, and Wohlers Terry
  • Rapid Prototyping Journal, 1995, Vol. 1, Issue 1, pp. 11-19.

91. Future potential of rapid prototyping and manufacturing around the world [1995]

  • Wohlers Terry
  • Rapid Prototyping Journal, 1995, Vol. 1, Issue 1, pp. 4-10.

92. Support fast generation algorithm based on discrete‐marking in stereolithgraphy rapid prototyping [2011]

  • Bo Qian, Lichao Zhang, Yusheng Shi, and Guocheng Liu
  • Rapid Prototyping Journal, 2011, Vol. 17, Issue 6, pp. 451-457.

93. Development of new rapid prototyping process [2011]

  • Wesley Machado Cunico Marlon, Marcus Gomes da Silva Cruz Carlos, Machado Cunico Miriam, and Volpato Neri
  • Rapid Prototyping Journal, 2011, Vol. 17, Issue 2, pp. 138-147.

94. A framework for the rapid prototyping of knowledgebased recommender systems in the learning domain [2012]

  • Ruiz-Iniesta, Almudena, Jimenez-Diaz, Guillermo, and Gomez-Albarran, Mercedes
  • Journal of Research and Practice in Information Technology, Vol. 44, No. 2, May 2012: 167-181

95. A novel rapid prototyping system for expandable polystyrene [2011]

  • Sun Kun, Li Bo, Fang Liang, and Ye Qingguang
  • Rapid Prototyping Journal, 2011, Vol. 17, Issue 1, pp. 17-27.

96. Robotyping – new rapid prototyping processes for sand moulds using industrial robots [2000]

  • Schaaf Walter
  • Assembly Automation, 2000, Vol. 20, Issue 4, pp. 321-329.

97. Rapid prototyping: a key to fast tracking design to manufacture [2000]

  • Graham Simon
  • Assembly Automation, 2000, Vol. 20, Issue 4, pp. 291-294.

98. Rapid prototyping in Singapore: 1988 to 1997 [1997]

  • Chee Kai Chua and Kah Fai Leong
  • Rapid Prototyping Journal, 1997, Vol. 3, Issue 3, pp. 116-119.

99. Technology forecast on ink‐jet head technology applications in rapid prototyping [1997]

  • Carrión Alejandro
  • Rapid Prototyping Journal, 1997, Vol. 3, Issue 3, pp. 99-115.

100. New slant in rapid prototyping [1996]

  • Kochan Anna
  • Assembly Automation, 1996, Vol. 16, Issue 4, pp. 26-29.

Catalog

Books, media, physical & digital resources
See catalog results
Catalog results include