articles+ search results

2,870 articles+ results

1 - 100
View results as:
Number of results to display per page

1. The role of additive technologies in the prototyping issues of design [2018]

  • Monica Carfagni, Lorenzo Fiorineschi, Rocco Furferi, Lapo Governi, and Federico Rotini
  • Rapid Prototyping Journal, 2018, Vol. 24, Issue 7, pp. 1101-1116.

2. Rapid prototyping eddy current sensors using 3D printing [2018]

  • Bo Li, Lifan Meng, Hongyu Wang, Jing Li, and Chunmei Liu
  • Rapid Prototyping Journal, 2018, Vol. 24, Issue 1, pp. 106-113.

3. Direct global editing of STL mesh model for product design and rapid prototyping [2017]

  • N. Adhikary and B. Gurumoorthy
  • Rapid Prototyping Journal, 2017, Vol. 23, Issue 4, pp. 781-795.

4. Rapid prototyping assisted fabrication of customized surgical guides in mandibular distraction osteogenesis: a case report [2017]

  • Sandeep W. Dahake, Abhaykumar M. Kuthe, Jitendra Chawla, and Mahesh B. Mawale
  • Rapid Prototyping Journal, 2017, Vol. 23, Issue 3, pp. 602-610.

5. Modeling and prototyping of a soft closed-chain modular gripper [2019]

  • Muddasar Anwar, Toufik Al Khawli, Irfan Hussain, Dongming Gan, and Federico Renda
  • Industrial Robot: the international journal of robotics research and application, 2019, Vol. 46, Issue 1, pp. 135-145.

6. Applications of medical rapid prototyping assisted customized surgical guides in complex surgeries [2016]

  • Sandeep W. Dahake, Abhaykumar M. Kuthe, Mahesh B. Mawale, and Ashutosh D. Bagde
  • Rapid Prototyping Journal, 2016, Vol. 22, Issue 6, pp. 934-946.

7. Mechanical properties of urethane diacrylate/bamboo powder composite fabricated by rapid prototyping system [2016]

  • Shih-Hsuan Chiu, Ivan Ivan, Cheng-Lung Wu, Kun-Ting Chen, Sigit Tri Wicaksono, and Hitoshi Takagi
  • Rapid Prototyping Journal, 2016, Vol. 22, Issue 4, pp. 676-683.

8. Iterative prototyping of strategy implementation workshop design [2018]

  • Anders Kryger
  • Journal of Strategy and Management, 2018, Vol. 11, Issue 2, pp. 166-183.

9. The use of rapid prototyping in the joining of fractured historical silver object [2018]

  • Maria Luiza Seixas, Paulo Santos Assis, João Cura D’Ars Figueiredo Jr., Maria Aparecida Pinto, and Daniella Gualberto Caldeira Paula
  • Rapid Prototyping Journal, 2018, Vol. 24, Issue 3, pp. 532-538.

10. Rapid prototyping in the intervertebral implant design process [2015]

  • Rapid Prototyping Journal, 2015, Vol. 21, Issue 6, pp. 735-746.

11. Global adaptive slicing of NURBS based sculptured surface for minimum texture error in rapid prototyping [2015]

  • Rapid Prototyping Journal, 2015, Vol. 21, Issue 6, pp. 649-661.

12. Evaluation of thiol-ene photo-curable resins using in rapid prototyping [2016]

  • Jian Zhou, Qiuyu Zhang, Hepeng Zhang, Jiaojun Tan, Shaojie Chen, Qing Liu, Mingliang Ma, and Tiejun Xin
  • Rapid Prototyping Journal, 2016, Vol. 22, Issue 3, pp. 465-473.

13. Application of curved layer manufacturing for preservation of randomly located minute critical surface features in rapid prototyping [2015]

  • Rapid Prototyping Journal, 2015, Vol. 21, Issue 6, pp. 725-734.

14. Application of improved complex proportional assessment (COPRAS) method for rapid prototyping system selection [2015]

  • Rapid Prototyping Journal, 2015, Vol. 21, Issue 6, pp. 671-674.

15. Design and prototyping of the novel axial flux-switching permanent-magnet motor [2018]

  • Javad Rahmani Fard and Mohammad Ardebili
  • COMPEL -The international journal for computation and mathematics in electrical and electronic engineering, 2018, Vol. 37, Issue 2, pp. 890-910.

16. Combining rapid prototyping techniques in mechanical engineering and electronics for realization of a variable capacitor [2014]

  • Stojanović Goran, Mandić Vesna, Ćurčić Milan, Vasiljević Dragana, Kisić Milica, and Radosavljević Nikola
  • Rapid Prototyping Journal, 2014, Vol. 20, Issue 2, pp. 115-120.

17. Analysis, optimization and prototyping of a parallel RCM mechanism of a surgical robot for craniotomy surgery [2018]

  • Mohammadreza Dehghani, Majid Mohammadi Moghadam, and Pourya Torabi
  • Industrial Robot: An International Journal, 2018, Vol. 45, Issue 1, pp. 78-88.

18. Metal AM System Revs up Prototyping for Start-Up's New Engine [2019]

  • Hider, Julia
  • Modern Machine Shop. Jan 2019, Vol. 91 Issue 8, p98, 5p.

19. Rapid prototyping-assisted fabrication of the customized metatarsophalangeal joint implant (SamKu) : A case report [2014]

  • C. Raghatate Sameer, M. Kuthe Abhaykumar, R. Deshmukh Tushar, and W. Dahake Sandeep
  • Rapid Prototyping Journal, 2014, Vol. 20, Issue 4, pp. 270-279.

20. Basics and applications of rapid prototyping medical models [2014]

  • Negi Sushant, Dhiman Suresh, and Kumar Sharma Rajesh
  • Rapid Prototyping Journal, 2014, Vol. 20, Issue 3, pp. 256-267.

21. State-of-the-art in empirical modelling of rapid prototyping processes [2014]

  • Garg A., Tai K., and Savalani M.M.
  • Rapid Prototyping Journal, 2014, Vol. 20, Issue 2, pp. 164-178.

22. Development of SVM rapid prototyping for scaffold fabrication [2014]

  • Phattanaphibul Thittikorn, Koomsap Pisut, Idram Irwansyah, and Nachaisit Suchart
  • Rapid Prototyping Journal, 2014, Vol. 20, Issue 2, pp. 90-104.

23. From “ethics of the eye” to “ethics of the hand” by collaborative prototyping [2014]

  • Christiansen Ellen
  • Journal of Information, Communication and Ethics in Society, 2014, Vol. 12, Issue 1, pp. 3-9.

24. Feasibility study on accurate rapid prototyping for human hand bones and affiliated artery [2017]

  • Dafeng Ji, Peng Wang, Xinhua Zhang, and Xinrong Chen
  • Rapid Prototyping Journal, 2017, Vol. 23, Issue 1, pp. 96-100.

25. Investigating the friction coefficient in functionally graded rapid prototyping of Al–Al2O3 composite prepared by fused deposition modelling [2017]

  • Rupinder Singh and Sunpreet Singh
  • Assembly Automation, 2017, Vol. 37, Issue 2, pp. 154-161.

26. Remotely Accessible Rapid Prototyping Laboratory: design and implementation framework [2012]

  • Fidan Ismail
  • Rapid Prototyping Journal, 2012, Vol. 18, Issue 5, pp. 344-352.

27. Dynamic crack propagation and arrest in rapid prototyping material [2012]

  • Ibrahim Umar and Irfan Mohammad A.
  • Rapid Prototyping Journal, 2012, Vol. 18, Issue 2, pp. 154-160.

28. Prototyping, customer involvement, and speed of information dissemination in new product success [2016]

  • Siohong Tih, Kok-Kee Wong, Gary S. Lynn, and Richard R. Reilly
  • Journal of Business & Industrial Marketing, 2016, Vol. 31, Issue 4, pp. 437-448.

29. Design and manufacture methods of rapid prototyping wind‐tunnel models based on photopolymer‐resin [2013]

  • Dang‐guo Yang, Yan Sun, Zheng‐yu Zhang, Chao Wang, and Wei‐jun Zhu
  • Rapid Prototyping Journal, 2013, Vol. 19, Issue 1, pp. 20-27.

30. Quantitative assessments of geometric errors for rapid prototyping in medical applications [2012]

  • Arrieta Cristobal, Uribe Sergio, Ramos‐Grez Jorge, Vargas Alex, Irarrazaval Pablo, Parot Vicente, and Tejos Cristian
  • Rapid Prototyping Journal, 2012, Vol. 18, Issue 6, pp. 431-442.

31. The use of rapid prototyping techniques (RPT) to manufacture micro channels suitable for high operation pressures and μPIV [2016]

  • Rapid Prototyping Journal, 2016, Vol. 22, Issue 1, pp. 67-76.

32. Rapid prototyping process selection using multi criteria decision making considering environmental criteria and its decision support system [2016]

  • Vimal KEK, Vinodh S., Brajesh P., and Muralidharan R.
  • Rapid Prototyping Journal, 2016, Vol. 22, Issue 2, pp. 225-250.

33. The use of virtual prototyping to rehearse the sequence of construction work involving mobile cranes [2012]

  • Li Heng, Chan Neo K.Y., and Skitmore Martin
  • Construction Innovation, 2012, Vol. 12, Issue 4, pp. 429-446.

34. Investigation of electroless nickel plating on rapid prototyping material of acrylic resin [2016]

  • Rapid Prototyping Journal, 2016, Vol. 22, Issue 1, pp. 162-169.

35. The use of virtual prototyping for hazard identification in the early design stage [2012]

  • King Chun Chan, Li Heng, and Skitmore Martin
  • Construction Innovation, 2012, Vol. 12, Issue 1, pp. 29-42.

36. Rapid prototyping assisted fabrication of the customised temporomandibular joint implant: a case report [2011]

  • Deshmukh T.R., Kuthe A.M., Chaware S.M., Vaibhav B., and Ingole D.S.
  • Rapid Prototyping Journal, 2011, Vol. 17, Issue 5, pp. 362-368.

37. Application of direct bonded copper substrates for prototyping of power electronic modules [2016]

  • Circuit World, 2016, Vol. 42, Issue 1, pp. 23-31.

38. Statistical modeling and minimization of form error in SLS prototyping [2012]

  • Senthilkumaran K., Pandey P.M., and Rao P.V.M.
  • Rapid Prototyping Journal, 2012, Vol. 18, Issue 1, pp. 38-48.

39. Rapid prototyping – a technology transfer approach for development of rapid tooling [2009]

  • Sahebrao Ingole Dilip, Madhusudan Kuthe Abhay, Thakare Shashank B., and Talankar Amol S.
  • Rapid Prototyping Journal, 2009, Vol. 15, Issue 4, pp. 280-290.

40. Regulating complex geometries using layered depth‐normal images for rapid prototyping and manufacturing [2013]

  • Rapid Prototyping Journal, 2013, Vol. 19, Issue 4, pp. 253-268.

41. A study of photomask correction method in area‐forming rapid prototyping system [2008]

  • Chiu Shih‐Hsuan, Pong Sheng‐Hong, Wu Dien‐Chi, and Lin Chien‐Hung
  • Rapid Prototyping Journal, 2008, Vol. 14, Issue 5, pp. 285-292.

42. 3D restitution, restoration and prototyping of a medieval damaged skull [2008]

  • Fantini Massimiliano, de Crescenzio Francesca, Persiani Franco, Benazzi Stefano, and Gruppioni Giorgio
  • Rapid Prototyping Journal, 2008, Vol. 14, Issue 5, pp. 318-324.

43. Distributed rapid prototyping – a framework for Internet prototyping and manufacturing [2001]

  • Tay Francis E.H., Khanal Yadav P., Kuen Kwong Kwok, and Cheng Tan Kim
  • Integrated Manufacturing Systems, 2001, Vol. 12, Issue 6, pp. 409-415.

44. Investigation of an electrophotography based rapid prototyping technology [2003]

  • Kumar Ashok V. and Dutta Anirban
  • Rapid Prototyping Journal, 2003, Vol. 9, Issue 2, pp. 95-103.

45. What and whose values in design? : The challenge of incorporating ethics into collaborative prototyping [2014]

  • Gerdes Anne
  • Journal of Information, Communication and Ethics in Society, 2014, Vol. 12, Issue 1, pp. 18-20.

46. Rapid prototyping of porcelain products by layer‐wise slurry deposition (LSD) and direct laser sintering [2012]

  • Tian Xiaoyong, Li Dichen, and Heinrich Juergen G.
  • Rapid Prototyping Journal, 2012, Vol. 18, Issue 5, pp. 362-373.

47. A dexel‐based virtual prototyping system for product development [2002]

  • Choi S.H. and Chan A.M.M.
  • Rapid Prototyping Journal, 2002, Vol. 8, Issue 5, pp. 300-314.

48. Visualisation of rapid prototyping [2001]

  • Choi S.H. and Samavedam S.
  • Rapid Prototyping Journal, 2001, Vol. 7, Issue 2, pp. 99-114.

49. Development of a web‐based tele‐manufacturing service system for rapid prototyping [2006]

  • Liu Xiao‐guang, Jin Ye, and Xi Jun‐tong
  • Journal of Manufacturing Technology Management, 2006, Vol. 17, Issue 3, pp. 303-314.

50. HyCon: virtual prototyping in hybrid concrete construction frame design [2006]

  • Zhang X., Goulding J.S., Sexton M.G., Aouad G., and Kagioglou M.
  • Construction Innovation, 2006, Vol. 6, Issue 1, pp. 47-60.

51. Design for medical rapid prototyping of cranioplasty implants [2003]

  • Hieu L.C., Bohez E., Vander Sloten J., Phien H.N., Vatcharaporn E., Binh P.H., An P.V., and Oris P.
  • Rapid Prototyping Journal, 2003, Vol. 9, Issue 3, pp. 175-186.

52. The customized mandible substitute based on rapid prototyping [2003]

  • Yaxiong Liu, Dichen Li, Bingheng Lu, Sanhu He, and Gang Li
  • Rapid Prototyping Journal, 2003, Vol. 9, Issue 3, pp. 167-174.

53. Rapid prototyping for treatment of canine limb deformities [2003]

  • Harrysson Ola L.A., Cormier Denis R., Marcellin‐Little Denis J., and Jajal Ketan
  • Rapid Prototyping Journal, 2003, Vol. 9, Issue 1, pp. 37-42.

54. A study on effects of process parameters in rapid freeze prototyping [2003]

  • Bryant Frances D., Sui Guanghua, and Leu Ming C.
  • Rapid Prototyping Journal, 2003, Vol. 9, Issue 1, pp. 19-23.

55. Smoothing STL files by Max‐Fit biarc curves for rapid prototyping [2000]

  • Koc Bahattin, Ma Yawei, and Lee Yuan‐Shin
  • Rapid Prototyping Journal, 2000, Vol. 6, Issue 3, pp. 186-205.

56. Rapid prototyping for architectural models [2002]

  • Gibson Ian, Kvan Thomas, and Wai Ming Ling
  • Rapid Prototyping Journal, 2002, Vol. 8, Issue 2, pp. 91-95.

57. The role of rapid prototyping in the product development process: A case study on the ergonomic factors of handheld video games [2002]

  • Lopez Samuel M. and Wright Paul K.
  • Rapid Prototyping Journal, 2002, Vol. 8, Issue 2, pp. 116-125.

58. Prosthetic sockets fabrication using rapid prototyping technology [2002]

  • Ng P., Lee P.S.V., and Goh J.C.H.
  • Rapid Prototyping Journal, 2002, Vol. 8, Issue 1, pp. 53-59.

59. Algorithms for accurate rapid prototyping replication of cancellous bone voxel maps [2002]

  • Sisias G., Phillips R., Dobson C.A., Fagan M.J., and Langton C.M.
  • Rapid Prototyping Journal, 2002, Vol. 8, Issue 1, pp. 6-24.

60. Rapid prototyping and art [1999]

  • Rees Michael
  • Rapid Prototyping Journal, 1999, Vol. 5, Issue 4, pp. 154-167.

61. Standards for the rapid prototyping industry [1999]

  • Jurrens Kevin K.
  • Rapid Prototyping Journal, 1999, Vol. 5, Issue 4, pp. 169-178.

62. An integrated design approach for rapid product development : A case study through application of reverse engineering, re‐engineering and fast prototyping tools [2013]

  • Ali Fahraz, Chowdary Boppana V., and Gonzales Luis
  • Journal of Engineering, Design and Technology, 2013, Vol. 11, Issue 2, pp. 178-189.

63. Garment prototyping based on scalable virtual female bodies [2013]

  • Chaw Hlaing Ei, Krzywinski Sybille, and Roedel Hartmut
  • International Journal of Clothing Science and Technology, 2013, Vol. 25, Issue 3, pp. 184-197.

64. Improving the process of making rapid prototyping models from medical ultrasound images [2012]

  • Vaezi Mohammad, Kai Chua Chee, and Meng Chou Siaw
  • Rapid Prototyping Journal, 2012, Vol. 18, Issue 4, pp. 287-298.

65. Additive manufacturing: rapid prototyping comes of age [2012]

  • Campbell Ian, Bourell David, and Gibson Ian
  • Rapid Prototyping Journal, 2012, Vol. 18, Issue 4, pp. 255-258.

66. A study on the fabrication method of removable partial denture framework by computer‐aided design and rapid prototyping [2012]

  • Wu Jiang, Wang Xiaobo, Zhao Xianghui, Zhang Chunbao, and Gao Bo
  • Rapid Prototyping Journal, 2012, Vol. 18, Issue 4, pp. 318-323.

67. Path planning in the Proteus rapid prototyping system [2001]

  • Tarabanis Konstantinos A.
  • Rapid Prototyping Journal, 2001, Vol. 7, Issue 5, pp. 241-252.

68. Rapid prototyping for direct manufacture [2001]

  • Hopkinson Neil and Dickens Phill
  • Rapid Prototyping Journal, 2001, Vol. 7, Issue 4, pp. 197-202.

69. Rapid prototyping integrated systems [2001]

  • Onuh S.O.
  • Rapid Prototyping Journal, 2001, Vol. 7, Issue 4, pp. 220-223.

70. An easy rapid prototyping technique with point cloud data [2001]

  • Pal Pralay
  • Rapid Prototyping Journal, 2001, Vol. 7, Issue 2, pp. 82-90.

71. A comparison of rapid prototyping techniques used for wind tunnel model fabrication [1998]

  • Chuk Raymond N. and Thomson Vincent J.
  • Rapid Prototyping Journal, 1998, Vol. 4, Issue 4, pp. 185-196.

72. Piezoelectric ceramics and composites via rapid prototyping techniques [1998]

  • Bandyopadhyay A., Panda R.K., McNulty T.F., Mohammadi F., Danforth S.C., and Safari A.
  • Rapid Prototyping Journal, 1998, Vol. 4, Issue 1, pp. 37-49.

73. Options for additive rapid prototyping methods (3D printing) in MEMS technology. [2014]

  • Lifton Victor, Lifton Gregory, Simon Steve, Campbell R. Ian, and Bourell David
  • Rapid Prototyping Journal, 2014, Vol. 20, Issue 5.

74. A Method to Represent Heterogeneous Materials for Rapid Prototyping – The Matryoshka Approach [2014]

  • Lei Shuangyan, Frank Matthew Charles, Anderson Donald D., Brown Thomas D., Campbell R. Ian, and Bourell David
  • Rapid Prototyping Journal, 2014, Vol. 20, Issue 5.

75. Rapid prototyping gains speed, volume and precision [2000]

  • Kochan Anna
  • Assembly Automation, 2000, Vol. 20, Issue 4, pp. 295-299.

76. Rapid prototyping of small size objects [2000]

  • Bertsch Arnaud, Bernhard Paul, Vogt Christian, and Renaud Philippe
  • Rapid Prototyping Journal, 2000, Vol. 6, Issue 4, pp. 259-266.

77. Surface macro‐texture design for rapid prototyping [2000]

  • Jee Haeseong and Sachs Emanuel
  • Rapid Prototyping Journal, 2000, Vol. 6, Issue 1, pp. 50-60.

78. Facial prosthetic model fabrication using rapid prototyping tools [2000]

  • Chee Kai Chua, Siaw Meng Chou, Sin Ching Lin, Seng Teik Lee, and Chit Aung Saw
  • Integrated Manufacturing Systems, 2000, Vol. 11, Issue 1, pp. 42-53.

79. Integrating rapid prototyping into the engineering curriculum ‐ a case study [1997]

  • Helge Bøhn Jan
  • Rapid Prototyping Journal, 1997, Vol. 3, Issue 1, pp. 32-37.

80. Modelling, prototyping, and verifying concurrent and distributed applications using object‐oriented Petri nets [2002]

  • Češka Milan, Janoušek Vladimír, and Vojnar Tomá&scaron
  • Kybernetes, 2002, Vol. 31, Issue 9/10, pp. 1289-1299.

81. Integrated rapid prototyping and rapid tooling (IRPRT) [2002]

  • Folkestad James E. and Johnson Russell L.
  • Integrated Manufacturing Systems, 2002, Vol. 13, Issue 2, pp. 97-103.

82. The business of rapid prototyping [1999]

  • Smith Preston G.
  • Rapid Prototyping Journal, 1999, Vol. 5, Issue 4, pp. 179-186.

83. Low cost prototyping of multichip modules ‐ the European INCO‐Copernicus project [1999]

  • Illyefalvi‐Vitéz Zsolt, Vervaet Alfons, Van Calster Andr&eacute, Sinnadurai Nihal, Hrovat Marko, Svasta Paul, Tóth Endre, Belavic Darko, Mihai Ionescu Radu, and Dennehy William
  • Microelectronics International: An International Journal, 1999, Vol. 16, Issue 2, pp. 13-19.

84. Considerations and selection of optimal orientation for different rapid prototyping systems [1999]

  • Xu F., Loh H.T., and Wong Y.S.
  • Rapid Prototyping Journal, 1999, Vol. 5, Issue 2, pp. 54-60.

85. A discussion on the concept of a flexible rapid prototyping cell [1996]

  • Gibson Ian
  • Rapid Prototyping Journal, 1996, Vol. 2, Issue 2, pp. 32-38.

86. Intelligent rapid prototyping with fused deposition modelling [1996]

  • Masood Syed H.
  • Rapid Prototyping Journal, 1996, Vol. 2, Issue 1, pp. 24-33.

87. Virtual prototyping for customized product development [1998]

  • Tseng Mitchell M., Jiao Jianxin, and Su Chuan‐Jun
  • Integrated Manufacturing Systems, 1998, Vol. 9, Issue 6, pp. 334-343.

88. Motion compensation for five‐axis rapid prototyping system [1998]

  • Ng Peow, Fang Wei, Li Bo, Zou Jiguo, and Gong Haiqing
  • Rapid Prototyping Journal, 1998, Vol. 4, Issue 2, pp. 68-76.

89. How rapid prototyping can assist in the development of new orthopaedic products ‐ a case study [1995]

  • Jamieson R., Holmer B., and Ashby A.
  • Rapid Prototyping Journal, 1995, Vol. 1, Issue 4, pp. 38-41.

90. Rapid prototyping: current technology and future potential [1995]

  • Hull Charles, Feygin Michael, Baron Yehudah, Sanders Roy, Sachs Emanuel, Lightman Allan, and Wohlers Terry
  • Rapid Prototyping Journal, 1995, Vol. 1, Issue 1, pp. 11-19.

91. Future potential of rapid prototyping and manufacturing around the world [1995]

  • Wohlers Terry
  • Rapid Prototyping Journal, 1995, Vol. 1, Issue 1, pp. 4-10.

92. Support fast generation algorithm based on discrete‐marking in stereolithgraphy rapid prototyping [2011]

  • Bo Qian, Lichao Zhang, Yusheng Shi, and Guocheng Liu
  • Rapid Prototyping Journal, 2011, Vol. 17, Issue 6, pp. 451-457.

93. Development of new rapid prototyping process [2011]

  • Wesley Machado Cunico Marlon, Marcus Gomes da Silva Cruz Carlos, Machado Cunico Miriam, and Volpato Neri
  • Rapid Prototyping Journal, 2011, Vol. 17, Issue 2, pp. 138-147.

94. Robotyping – new rapid prototyping processes for sand moulds using industrial robots [2000]

  • Schaaf Walter
  • Assembly Automation, 2000, Vol. 20, Issue 4, pp. 321-329.

95. Rapid prototyping: a key to fast tracking design to manufacture [2000]

  • Graham Simon
  • Assembly Automation, 2000, Vol. 20, Issue 4, pp. 291-294.

96. Rapid prototyping in Singapore: 1988 to 1997 [1997]

  • Chee Kai Chua and Kah Fai Leong
  • Rapid Prototyping Journal, 1997, Vol. 3, Issue 3, pp. 116-119.

97. Technology forecast on ink‐jet head technology applications in rapid prototyping [1997]

  • Carrión Alejandro
  • Rapid Prototyping Journal, 1997, Vol. 3, Issue 3, pp. 99-115.

98. New slant in rapid prototyping [1996]

  • Kochan Anna
  • Assembly Automation, 1996, Vol. 16, Issue 4, pp. 26-29.

99. Rapid prototyping from a computer scientist’s point of view [1996]

  • Dolenc A. and Mäkelä I.
  • Rapid Prototyping Journal, 1996, Vol. 2, Issue 2, pp. 18-25.

100. Importing and reshaping digitized data for use in rapid prototyping: a system for sculpting polygonal mesh surfaces [1996]

  • Alciatore David G. and Wohlers Terry T.
  • Rapid Prototyping Journal, 1996, Vol. 2, Issue 1, pp. 13-23.

Catalog

Books, media, physical & digital resources
See catalog results
Catalog results include