1. Post‐processing of selective laser sintered metal parts Agarwala, Mukesh, Bourell, David, Beaman, Joseph, Marcus, Harris, and Barlow, Joel Rapid Prototyping Journal, 1995, Vol. 1, Issue 2, pp. 36-44. Full text View on content provider's site
2. Powder deposition in selective metal powder sintering Van der Schueren, B. and Kruth, J.P. Rapid Prototyping Journal, 1995, Vol. 1, Issue 3, pp. 23-31. Full text View on content provider's site
3. Rapid metal tooling Klocke, F., Celiker, T., and Song, Y.‐A. Rapid Prototyping Journal, 1995, Vol. 1, Issue 3, pp. 32-42. Full text View on content provider's site
4. Rapid Mould: epoxy‐infiltrated, laser‐sintered inserts Apelskog Killander, Lena Rapid Prototyping Journal, 1996, Vol. 2, Issue 1, pp. 34-40. Full text View on content provider's site
5. Structural quality of parts processed by fused deposition Agarwala, Mukesh K., Jamalabad, Vikram R., Langrana, Noshir A., Safari, Ahmad, Whalen, Philip J., and Danforth, Stephen C. Rapid Prototyping Journal, 1996, Vol. 2, Issue 4, pp. 4-19. Full text View on content provider's site
6. Rapid tooling Radstok, Eric Rapid Prototyping Journal, 1999, Vol. 5, Issue 4, pp. 164-169. Full text View on content provider's site
7. Rapid prototyping gains speed, volume and precision Kochan, Anna Assembly Automation, 2000, Vol. 20, Issue 4, pp. 295-299. Full text View on content provider's site
8. Advanced deposition techniques for freeform fabrication of metal and ceramic parts Tseng, A.A. and Tanaka, M. Rapid Prototyping Journal, 2001, Vol. 7, Issue 1, pp. 6-17. Full text View on content provider's site
9. Mechanisms of selective laser sintering and heat transfer in Ti powder Tolochko, Nikolay K., Arshinov, Maxim K., Gusarov, Andrey V., Titov, Victor I., Laoui, Tahar, and Froyen, Ludo Rapid Prototyping Journal, 2003, Vol. 9, Issue 5, pp. 314-326. Full text View on content provider's site
10. Manufacturing sacrificial patterns for casting by salt powder lamination Marutani, Yoji and Kamitani, Takayuki Rapid Prototyping Journal, 2004, Vol. 10, Issue 5, pp. 281-287. Full text View on content provider's site
11. Development of nickel‐titanium graded composition components Domack, M.S. and Baughman, J.M. Rapid Prototyping Journal, 2005, Vol. 11, Issue 1, pp. 41-51. Full text View on content provider's site
12. Microstructural evolution in direct laser sintering of Cu‐based metal powder Zhu, H.H., Fuh, J.Y.H., and Lu, L. Rapid Prototyping Journal, 2005, Vol. 11, Issue 2, pp. 74-81. Full text View on content provider's site
13. Thermal characteristics of a new metal/polymer material for FDM rapid prototyping process Masood, S.H., Song, W.Q., and Dr. Corney, Jonathan Assembly Automation, 2005, Vol. 25, Issue 4, pp. 309-315. Full text View on content provider's site
14. Rapid manufacturing of patient‐specific shielding masks, using RP in parallel with metal spraying de Beer, Deon J., Truscott, Michéle, Booysen, Gerrie J., Barnard, Ludrick J., and van der Walt, Jakobus G. Rapid Prototyping Journal, 2005, Vol. 11, Issue 5, pp. 298-303. Full text View on content provider's site
15. Comparison between the products of four RPM systems for metals Abdel Ghany, K. and Moustafa, S.F. Rapid Prototyping Journal, 2006, Vol. 12, Issue 2, pp. 86-94. Full text View on content provider's site
16. Improving accuracy of powder‐based SFF processes by metal deposition from a nanoparticle dispersion Crane, Nathan B., Wilkes, J., Sachs, E., and Allen, Samuel M. Rapid Prototyping Journal, 2006, Vol. 12, Issue 5, pp. 266-274. Full text View on content provider's site
17. Selective laser melting of heat transfer devices Wong, Matthew, Tsopanos, Sozon, Sutcliffe, Chris J., and Owen, Ieuan Rapid Prototyping Journal, 2007, Vol. 13, Issue 5, pp. 291-297. Full text View on content provider's site
18. A new method of direct metal prototyping: hybrid plasma deposition and milling Xiong, Xinhong, Haiou, Zhang, and Guilan, Wang Rapid Prototyping Journal, 2008, Vol. 14, Issue 1, pp. 53-56. Full text View on content provider's site
19. Preparation and selective laser sintering of nylon‐coated metal powders for the indirect SLS process Yan, C.Z., Shi, Y.S., Yang, J.S., and Liu, J.H. Rapid Prototyping Journal, 2009, Vol. 15, Issue 5, pp. 355-360. Full text View on content provider's site
20. Fabrication and compressive properties of Ti6Al4V implant with honeycomb‐like structure for biomedical applications Li, Xiang, Wang, Chengtao, Zhang, Wenguang, and Li, Yuanchao Rapid Prototyping Journal, 2010, Vol. 16, Issue 1, pp. 44-49. Full text View on content provider's site
21. Microscale metal additive manufacturing of multi‐component medical devices Cohen, Adam, Chen, Richard, Frodis, Uri, Wu, Ming‐Ting, Folk, Chris, Bourell, Dave, and Stucker, Brent Rapid Prototyping Journal, 2010, Vol. 16, Issue 3, pp. 209-215. Full text View on content provider's site
22. Blending of iron and silicon carbide powders for producing metal matrix composites by laser sintering process Krishnamurthy Srinivasa, Cheekur, Suryanarayana Ramesh, Chinnakurli, and Prabhakar, S.K. Rapid Prototyping Journal, 2010, Vol. 16, Issue 4, pp. 258-267. Full text View on content provider's site
23. Temperature distribution in powder beds during 3D printing Dressler, M., Röllig, M., Schmidt, M., Maturilli, A., and Helbert, J. Rapid Prototyping Journal, 2010, Vol. 16, Issue 5, pp. 328-336. Full text View on content provider's site
24. The influence of standoff variations on the forming accuracy in laser direct metal deposition Zhu, Gangxian, Li, Dichen, Zhang, Anfeng, Pi, Gang, and Tang, Yiping Rapid Prototyping Journal, 2011, Vol. 17, Issue 2, pp. 98-106. Full text View on content provider's site
25. On the use of EAS solid‐shell formulations in the numerical simulation of incremental forming processes Sena, J.I.V., Alves de Sousa, R.J., and Valente, R.A.F. Engineering Computations, 2011, Vol. 28, Issue 3, pp. 287-313. Full text View on content provider's site
26. Transient thermal response in ultrasonic additive manufacturing of aluminum 3003 Schick, David, Suresh Babu, Sudarsanam, Foster, Daniel R., Dapino, Marcelo, Short, Matt, and Lippold, John C. Rapid Prototyping Journal, 2011, Vol. 17, Issue 5, pp. 369-379. Full text View on content provider's site
27. Fabrication of magnesium using selective laser melting technique Chung Ng, Chi, Savalani, Monica, and Chung Man, Hau Rapid Prototyping Journal, 2011, Vol. 17, Issue 6, pp. 479-490. Full text View on content provider's site
28. Top surface quality research for direct metal laser fabrication Yang, Jialin, Ouyang, Hongwu, Xu, Chao, and Wang, Yang Rapid Prototyping Journal, 2012, Vol. 18, Issue 1, pp. 4-15. Full text View on content provider's site
29. Metallic part fabrication using selective inhibition sintering (SIS) Khoshnevis, Behrokh, Yoozbashizadeh, Mahdi, and Chen, Yong Rapid Prototyping Journal, 2012, Vol. 18, Issue 2, pp. 144-153. Full text View on content provider's site
30. Obtaining desired surface roughness of castings produced using ZCast direct metal casting process through Taguchi's experimental approach Chhabra, Munish and Singh, Rupinder Rapid Prototyping Journal, 2012, Vol. 18, Issue 6, pp. 458-471. Full text View on content provider's site
31. Effect of the Q‐switch parameters on the sintering behavior of laser micro sintering Cu‐based metal powder using Q‐switched Nd‐YAG laser Zhu, Haihong, Ke, Linda, Lei, Wenjuan, Dai, Cheng, and Chen, Baijin Rapid Prototyping Journal, 2013, Vol. 19, Issue 1, pp. 44-50. Full text View on content provider's site
32. Investigation of plasma spectra during selective laser micro sintering Cu‐based metal powder Cheng, Dai, Zhu, Haihong, and Ke, Linda Rapid Prototyping Journal, 2013, Vol. 19, Issue 5, pp. 373-382. Full text View on content provider's site
33. Effect of preheat and layer thickness on selective laser melting (SLM) of magnesium Monica Mahesh Savalani and Jorge Martinez Pizarro Rapid Prototyping Journal, 2016, Vol. 22, Issue 1, pp. 115-122. Full text View on content provider's site
34. Processing windows for Ti-6Al-4V fabricated by selective electron beam melting with improved beam focus and different scan line spacings Pobel, Christoph R., Osmanlic, Fuad, Lodes, Matthias A., Wachter, Sebastian, and Körner, Carolin Rapid Prototyping Journal, 2018, Vol. 25, Issue 4, pp. 665-671. Full text View on content provider's site
35. Surface plasmon induced enhancement in selective laser melting processes Vinnakota, Raj K. and Genov, Dentcho A. Rapid Prototyping Journal, 2019, Vol. 25, Issue 6, pp. 1135-1143. Full text View on content provider's site
36. Cyclic shear response of additively manufactured Inconel 718 Siddiqui, Sanna F. and Gordon, Ali P. Rapid Prototyping Journal, 2020, Vol. 26, Issue 7, pp. 1237-1248. Full text View on content provider's site
37. Effect of system compliance on weld power in ultrasonic additive manufacturing Venkatraman, Gowtham, Hehr, Adam, Headings, Leon M., and Dapino, Marcelo J. Rapid Prototyping Journal, 2021, Vol. 27, Issue 9, pp. 1650-1663. Full text View on content provider's site