articles+ search results

Electrodes, Ion-Selective Electrodes, Ions, Potassium, Potentiometry, Printing, Three-Dimensional, Sodium, Internet of Things, and Robotics

We report automated fabrication of solid-contact sodium-selective (Na + -ISEs) and potassium-selective electrodes (K + -ISEs) using a 3D printed liquid handling robot controlled with Internet of Things (IoT) technology. The printing system is affordable and can be customized for the use with micropipettes for applications such as drop-casting, biological assays, sample preparation, rinsing, cell culture, and online analyte monitoring using multi-well plates. The robot is more compact (25 × 30 × 35 cm) and user-friendly than commercially available systems and does not require mechatronic experience. For fabrication of ion-selective electrodes, a carbon black intermediate layer and ion-selective membrane were successively drop-cast on the surface of stencil-printed carbon electrode using the dispensing robot. The 3D-printed robot increased ISE robustness while decreasing the modification time by eliminating manual steps. The Na + -ISEs and K + -ISEs were characterized for their potentiometric responses using a custom-made, low-cost (<$25) multi-channel smartphone-based potentiometer capable of signal processing and wireless data transmission. The electrodes showed Nernstian responses of 58.2 ± 2.6 mV decade -1 and 56.1 ± 0.7 mV decade -1 for Na + and K + , respectively with an LOD of 1.0 × 10 -5  M. We successfully applied the ISEs for multiplexed detection of Na + and K + in urine and artificial sweat samples at clinically relevant concentration ranges. The 3D-printed pipetting robot cost $100 and will pave the way for more accessible mass production of ISEs for those who cannot afford the expensive commercial robots.
(Copyright © 2022 Elsevier B.V. All rights reserved.)

Objectives. Lower back pain (LBP) is extremely prevalent in seafood harvesters who often have limited or no access to ergonomic consultation, occupational health support and rehabilitation services. This pilot study aimed to describe a participatory ergonomic approach and determine the feasibility and extent of adoption of self-management strategies in clam farmers with LBP. Methods. A rapid prototype participatory ergonomic approach was used to develop context-specific self-management strategies. Options to adjust lifting and repetitive stress were introduced using video clips, demonstrations and discussions in the workplace. Workers chose and implemented three strategies for 8 weeks with weekly reminders. Survey and qualitative data from focus groups were analyzed. Results. Team strategies were the most popular, but individual options were used more often. Strategies were considered feasible, acceptable and relatively easy to use. Strategies were implemented relatively consistently, and most improved productivity with decreased pain. Challenges for uptake included changing habit, culture and team dynamics. Conclusions. Participatory rapid prototyping provided a feasible and efficient option to introduce strategies for clam farmers with small teams, variable work processes and workloads, and time restrictions. Strategies were considered acceptable and easy to use, and most increased productivity. These methods show potential for future research.

Traveling wave structures for lossless ion manipulation (TW-SLIM) has proven a valuable tool for the separation and study of gas-phase ions. Unfortunately, many of the traditional components of TW-SLIM experiments manifest practical and financial barriers to the technique's broad implementation. To this end, a series of technological innovations and methodologies are presented which enable for simplified SLIM experimentation and more rapid TW-SLIM prototyping. In addition to the use of multiple independent board sets that comprise the present SLIM system, we introduce a low-cost, multifunctional traveling wave generator to produce TW within the TW-SLIM. This square-wave producing unit proved effective in realizing TW-SLIM separations compared to traditional approaches. Maintaining a focus on lowering barriers to implementation, the present set of experiments explores the use of on-board injection (OBI) methods, which offer potential alternatives to ion funnel traps. These OBI techniques proved feasible and the ability of this simplified TW-SLIM platform to enhance ion accumulation was established. Further experimentation regarding ion accumulation revealed a complexity to ion accumulation within TW-SLIM that has yet to be expounded upon. Lastly, the ability of the presented TW-SLIM platform to store ions for extended periods (1 s) without significant loss (<10%) was demonstrated. The aforementioned experiments clearly establish the efficacy of a simplified TW-SLIM platform which promises to expand adoption and experimentation of the technique.
(Copyright © 2022 Elsevier B.V. All rights reserved.)

DNA, Luciferases, Luminescence, Mycobacterium tuberculosis genetics, and RNA, Guide genetics

The wide application of molecular beacon probes in specific DNA detection, especially in the fast prototyping of pathogen DNA detection kits in point-of-care diagnostics, has been hindered by the nonflexible choice of target sequences and the unstable fluorophore output. We developed an in vitro DNA detection system consisting of a pair of dCas9 proteins linked to split halves of luciferase, named the Paired dCas9 (PC) reporter. Co-localization of the reporter pair to a ~46 bp target sequence defined by two single guide RNAs (sgRNAs) activated luciferase which subsequently generated highly intensified luminescent signals. Combined with an array design and statistical analyses, the PC reporter system could be programmed to access sequence information across the entire genome of the pathogenic Mycobacterium tuberculosis H37Rv strain. These findings suggest great potential for the PC reporter in effective and affordable in vitro nucleic acid detection technologies. In this article we highlighted the systems design from our previous researchworkon the PC reporter (Zhang et al, 2015)with a focuson methodology.
(Copyright © 2021 Elsevier Inc. All rights reserved.)

Drug Delivery Systems, Humans, and Bioprinting methods

Additive Manufacturing (AM) comprises a variety of techniques that enable fabrication of customised objects with specific attributes. The versatility of AM procedures and constant technological improvements allow for their application in the development of medicinal products and medical devices. This review provides an overview of AM applications related to respiratory sciences. For this purpose, both fields of research are briefly introduced and the potential benefits of integrating AM to respiratory sciences at different levels of pharmaceutical development are highlighted. Tailored manufacturing of microstructures as a particle design approach in respiratory drug delivery will be discussed. At the dosage form level, we exemplify AM as an important link in the iterative loop of data driven inhaler design, rapid prototyping and in vitro testing. This review also presents the application of bioprinting in the respiratory field for design of biorelevant in vitro cellular models, followed by an overview of AM-related processes in preventive and therapeutic care. Finally, this review discusses future prospects of AM as a component in a digital health environment.
(Copyright © 2022 The Authors. Published by Elsevier B.V. All rights reserved.)

Abstract: Surgical treatment of head and neck cancer causes severe tissue loss, therefore, deformities and psychosocial consequences. In cases involving orbit exenteration, satisfactory reconstruction can only be achieved with prosthetic replacement, despite successful reconstructive plastic surgery. Extraoral implants, 3D scanning, and prototyping technologies have contributed to increase satisfactory aesthetic results of oculofacial prosthesis. However, to achieve prosthetic rehabilitation refinement, patients' biological tissues have been treated with injectable cosmetic adjuncts methods as complements to results. This study aimed to describe the use of botulinum toxin type A, hyaluronic acid, and calcium hydroxyapatite previously to oculofacial prostheses manufacturing, in 5 oncologic patients of a rehabilitation unit. Outcomes produced by additional cosmetic methods on tissues, prostheses planning, and overall facial rehabilitation were observed and registered by photographs. Botulinum toxin type A, hyaluronic acid, and calcium hydroxyapatite has shown to be useful in improving asymmetries, volumizing surgical depressions and dissembling atrophic scars. Presenting an additional resource to improve overall results, enabling the manufacturing of smaller, thinner, and better-fitting oculofacial prostheses. Limitations as chronic infection and necrosis episodes, related to filler injection into previously irradiated sites, were described. The temporary effect of the materials used generates a need for reapplications but increases the safety of such procedures and enables patients' cancer treatment follow-up.
(Copyright © 2022 by Mutaz B. Habal, MD.)

Background: Trauma care faces challenges to innovating their services, such as with mobile health (mHealth) app, to improve the quality of care and patients' health experience. Systematic needs inquiries and collaborations with professional and patient end users are highly recommended to develop and prepare future implementations of such innovations.
Objective: This study aimed to develop a trauma mHealth app for patient information and support in accordance with the Center for eHealth Research and Disease Management road map and describe experiences of unmet information and support needs among injured patients with trauma, barriers to and facilitators of the provision of information and support among trauma care professionals, and drivers of value of an mHealth app in patients with trauma and trauma care professionals.
Methods: Formative evaluations were conducted using quantitative and qualitative methods. Ten semistructured interviews with patients with trauma and a focus group with 4 trauma care professionals were conducted for contextual inquiry and value specification. User requirements and value drivers were applied in prototyping. Furthermore, a complementary quantitative discrete choice experiment (DCE) was conducted with 109 Dutch trauma surgeons, which enabled triangulation on value specification results. In the DCE, preferences were stated for hypothetical mHealth products with various attributes. Panel data from the DCE were analyzed using conditional and mixed logit models.
Results: Patients disclosed a need for more psychosocial support and easy access to more extensive information on their injury, its consequences, and future prospects. Health care professionals designated workload as an essential issue; a digital solution should not require additional time. The conditional logit model of DCE results suggested that access to patient app data through electronic medical record integration (odds ratio [OR] 3.3, 95% CI 2.55-4.34; P<.001) or a web viewer (OR 2.3, 95% CI 1.64-3.31; P<.001) was considered the most important for an mHealth solution by surgeons, followed by the inclusion of periodic self-measurements (OR 2, 95% CI 1.64-2.46; P<.001), the local adjustment of patient information (OR 1.8, 95% CI 1.42-2.33; P<.001), local hospital identification (OR 1.7, 95% CI 1.31-2.10; P<.001), complication detection (OR 1.5, 95% CI 1.21-1.84; P<.001), and the personalization of rehabilitation through artificial intelligence (OR 1.4, 95% CI 1.13-1.62; P=.001).
Conclusions: In the context of trauma care, end users have many requirements for an mHealth solution that addresses psychosocial functioning; dependable information; and, possibly, a prediction of how a patient's recovery trajectory is evolving. A structured development approach provided insights into value drivers and facilitated mHealth prototype enhancement. The findings imply that iterative development should move on from simple and easily implementable mHealth solutions to those that are suitable for broader innovations of care pathways that most-but plausibly not yet all-end users in trauma care will value. This study could inspire the trauma care community.
(©Thymen Houwen, Miel A P Vugts, Koen W W Lansink, Hilco P Theeuwes, Nicky Neequaye, M Susan H Beerekamp, Margot C W Joosen, Mariska A C de Jongh. Originally published in JMIR Human Factors (https://humanfactors.jmir.org), 20.06.2022.)

Lower costs and higher employee satisfaction are some of the benefits driving organizations to adopt dispersed and virtual working arrangements. Despite these advantages, product design engineering teams-those who develop physical products-have not widely adopted this working style due to perceived critical dependence on physical facilities and the belief that it is ineffective to communicate technical details virtually. This paper uses the mass shift in working conditions caused by the COVID-19 pandemic to explore the feasibility of virtual and distributed work in product design engineering. We conducted 20 semi-structured interviews with product design engineers working virtually to uncover current challenges of, and the beginning of promising strategies for, effective virtual engineering work. We categorize and analyze Tangible Design activities, Intangible Design activities, and Communication and Project Management activities throughout the product design process. Contrary to present opinions, we found that much of a product design engineer's work is realizable in a virtual and distributed setting. However, there are still many challenges, especially when attempting Tangible Design activities-those that require physical products and tools-from home. These challenges, missing from existing virtual product design engineering literature, include but are not limited to individuals' lessened sense of accountability, fewer de-risking opportunities before product sign-off, and limited supervision of production staff. Product design engineers described novel strategies that emerged organically to mitigate these challenges, such as creating digital alternatives for engineering reviews and sign-offs and leveraging rapid prototyping. Recent advances in technology, an increased commitment to reducing environmental impact, and better work-life balance expectations from new generations of workers will only push society faster towards a distributed working model. Thus, it is critical that we use this opportunity to understand the existing challenges for distributed product design engineers, so that organizations can best prepare and become resilient to future shocks.
(© The Author(s), under exclusive licence to Springer-Verlag London Ltd., part of Springer Nature 2022.)

Gene Library, Protein Biosynthesis, Synthetic Biology, High-Throughput Screening Assays, and Microfluidics methods

Engineering regulatory parts for improved performance in genetic programs has played a pivotal role in the development of the synthetic biology cell programming toolbox. Here, we report the development of a novel high-throughput platform for regulatory part prototyping and analysis that leverages the advantages of engineered DNA libraries, cell-free protein synthesis (CFPS), high-throughput emulsion droplet microfluidics, standard flow sorting adapted to screen droplet reactions, and next-generation sequencing (NGS). With this integrated platform, we screened the activity of millions of genetic parts within hours, followed by NGS retrieval of the improved designs. This in vitro platform is particularly valuable for engineering regulatory parts of nonmodel organisms, where in vivo high-throughput screening methods are not readily available. The platform can be extended to multipart screening of complete genetic programs to optimize yield and stability.

Background: An increasing number of schools in rural settings are implementing multi-tier positive behavioral interventions and supports (PBIS) to address school-climate problems. PBIS can be used to provide the framework for the implementation of evidence-based practices (EBPs) to address children's mental health concerns. Given the large service disparities for children in rural areas, offering EBPs through PBIS can improve access and lead to better long-term outcomes. A key challenge is that school personnel need technical assistance in order to implement EBPs with fidelity and clinical effectiveness. Providing ongoing on-site support is not feasible or sustainable in the majority of rural schools, due to their remote physical location. For this reason, remote training technology has been recommended for providing technical assistance to behavioral health staff (BHS) in under-served rural communities.
Objectives: The purpose of this study is to use the user-centered design, guided by an iterative process (rapid prototyping), to develop and evaluate the appropriateness, feasibility, acceptability, usability, and preliminary student outcomes of two online training strategies for the implementation of EBPs at PBIS Tier 2.
Methods: The study will employ a pragmatic design comprised of a mixed-methods approach for the development of the training platform, and a hybrid type 2, pilot randomized controlled trial to examine the implementation and student outcomes of two training strategies: Remote Video vs. Remote Video plus Coaching.
Discussion: There is a clear need for well-designed remote training studies focused on training in non-traditional settings. Given the lack of well-trained mental health professionals in rural settings and the stark disparities in access to services, the development and pilot-testing of a remote training strategy for BHS in under-served rural schools could have a significant public health impact.
Ethics and Dissemination: The project was reviewed and approved by the institutional review board. Results will be submitted to ClinicalTrials.gov and disseminated to community partners and participants, peer-reviewed journals, and academic conferences.
Trial Registration: ClinicialTrials.gov, NCT05034198 and NCT05039164.
(© 2022. The Author(s).)

In 2019, the first cases of SARS-CoV-2 were detected in Wuhan, China, and by early 2020 the first cases were identified in the United States. SARS-CoV-2 infections increased in the US causing many states to implement stay-at-home orders and additional safety precautions to mitigate potential outbreaks. As policies changed throughout the pandemic and restrictions lifted, there was an increase in demand for COVID-19 testing which was costly, difficult to obtain, or had long turn-around times. Some academic institutions, including Boston University (BU), created an on-campus COVID-19 screening protocol as part of a plan for the safe return of students, faculty, and staff to campus with the option for in-person classes. At BU, we put together an automated high-throughput clinical testing laboratory with the capacity to run 45,000 individual tests weekly by Fall of 2020, with a purpose-built clinical testing laboratory, a multiplexed reverse transcription PCR (RT-qPCR) test, robotic instrumentation, and trained staff. There were many challenges including supply chain issues for personal protective equipment and testing materials in addition to equipment that were in high demand. The BU Clinical Testing Laboratory (CTL) was operational at the start of Fall 2020 and performed over 1 million SARS-CoV-2 PCR tests during the 2020-2021 academic year.
(Copyright © 2022. Published by Elsevier Inc.)

Metal patterning via additive manufacturing has been phasing-in to broad applications in many medical, electronics, aerospace, and automotive industries. While previous efforts have produced various promising metal patterning strategies, their complexity and high cost limited their practical application in rapid production and prototyping. Herein, we introduce a one-step gold printing technique based on anion-assisted photochemical deposition (APD), which can directly print highly conductive gold patterns (1.08×10 7 S m -1 ) under ambient conditions without post-annealing treatment. Uniquely, the APD uses specific ion effects with projection lithography to pattern Au nanoparticles and simultaneously sinter them into tunable porous gold structures. We present the significant influence of kosmotropic or chaotropic anions in the precursor ink on tuning the morphologies and conductivities of the printed patterns by employing a series of different ions, including Cl - ions, in the printing process. Additionally, the resistance stabilities and the electrochemical properties of the APD-printed gold patterns are carefully investigated. We demonstrate the high conductivity and excellent conformability of the printed Au electrodes with its reliable performance in electrophysiological signal delivery and acquisition for biomedical applications. Our work exploits the potential of photochemical deposition-based metal patterning in flexible electronic manufacturing. This article is protected by copyright. All rights reserved.
(This article is protected by copyright. All rights reserved.)

Entoptic phenomena are visual artifacts arising from the interaction of light with the specific anatomic structure of the human eye. While they are usually too subtle to actually enable additional visual abilities, their perception can provide indirect information on the physiological conditions of the visual system. Among the most famous ones, Haidinger's brushes consist in the appearance of a yellowish bow tie perceived in the presence of linearly polarized white light and originate from the particular spatial distribution of dichroic carotenoid molecules forming a sort of embedded radial polarizer in the foveal region. In this work, we develop a compact and versatile optical setup for the psychophysical analysis of the perceptual threshold of such entoptic effect. The tests performed on a group of 113 healthy individuals under conditions of maximum contrast (blue light) reveal the capability to perceive an average polarization degree around 16%. The developed prototype outlines a new optical platform to train the users in the perception of the phenomenon and infer information on the polarization-degree sensitivity of the human visual system.
(Copyright © 2022 Elsevier Ltd. All rights reserved.)

Electrodes, Electromyography, Electronics, Clothing, and Textiles

We present a novel design for an e-textile based surface electromyography (sEMG) suit that incorporates stretchable conductive textiles as electrodes and interconnects within an athletic compression garment. The fabrication and assembly approach is a facile combination of laser cutting and heat-press lamination that provides for rapid prototyping of designs in a typical research environment without need for any specialized textile or garment manufacturing equipment. The materials used are robust to wear, resilient to the high strains encountered in clothing, and can be machine laundered. The suit produces sEMG signal quality comparable to conventional adhesive electrodes, but with improved comfort, longevity, and reusability. The embedded electronics provide signal conditioning, amplification, digitization, and processing power to convert the raw EMG signals to a level-of-effort estimation for flexion and extension of the elbow and knee joints. The approach we detail herein is also expected to be extensible to a variety of other electrophysiological sensors.
(© 2022. The Author(s).)

Purpose: Virtual reality (VR) can provide an added value for diagnosis and/or intervention planning. Several VR software implementations have been proposed but they are often application dependent. Previous attempts for a more generic solution incorporating VR in medical prototyping software (MeVisLab) were still lacking functionality precluding easy and flexible development.
Methods: We propose an alternative solution that uses rendering to a graphical processing unit (GPU) texture to enable rendering arbitrary Open Inventor scenes in a VR context. It facilitates flexible development of user interaction and rendering of more complex scenes involving multiple objects. We tested the platform in planning a transcatheter cardiac stent placement procedure.
Results: This approach proved to enable development of a particular implementation that facilitates planning of percutaneous treatment of a sinus venosus atrial septal defect. The implementation showed it is intuitive to plan and verify the procedure using VR.
Conclusion: An alternative implementation for linking OpenVR with MeVisLab is provided that offers more flexible development of VR prototypes which can facilitate further clinical validation of this technology in various medical disciplines.
(© 2022. CARS.)

Computers, Neural Networks, Computer, Artificial Intelligence, and Space Flight

Convolution Neural Networks (CNNs) are gaining ground in deep learning and Artificial Intelligence (AI) domains, and they can benefit from rapid prototyping in order to produce efficient and low-power hardware designs. The inference process of a Deep Neural Network (DNN) is considered a computationally intensive process that requires hardware accelerators to operate in real-world scenarios due to the low latency requirements of real-time applications. As a result, High-Level Synthesis (HLS) tools are gaining popularity since they provide attractive ways to reduce design time complexity directly in register transfer level (RTL). In this paper, we implement a MobileNetV2 model using a state-of-the-art HLS tool in order to conduct a design space exploration and to provide insights on complex hardware designs which are tailored for DNN inference. Our goal is to combine design methodologies with sparsification techniques to produce hardware accelerators that achieve comparable error metrics within the same order of magnitude with the corresponding state-of-the-art systems while also significantly reducing the inference latency and resource utilization. Toward this end, we apply sparse matrix techniques on a MobileNetV2 model for efficient data representation, and we evaluate our designs in two different weight pruning approaches. Experimental results are evaluated with respect to the CIFAR-10 data set using several different design methodologies in order to fully explore their effects on the performance of the model under examination.

Health Personnel, Humans, Surveys and Questionnaires, and Mobile Applications

Objective: This article presents a mobile application model for the treatment tracking of in-hospital wounds.
Methods: A survey of the literature on mobile apps for wound monitoring was carried out. Health professionals were interviewed and wound forms were analyzed to synthesize the application's fields and features. We designed the application model using a prototyping tool.
Results: The prototype features interfaces for patient evaluation, different functionalities according to the role of the health professional, a dashboard for monitoring the open admissions, selection of wound locations using a body model, treatment prescribing, tracking the wounds using photos, and generating wound reports.
Conclusion: The adoption of this application could optimize wounds' treatment, increase patient safety, reduce material expenditures and time for professionals with rework in the dressing procedure.

Delivery of Health Care, Feedback, Humans, Kidney, Workflow, and Kidney Transplantation

There is a need for IT systems that support the complex needs of data management in kidney transplantation. The KidneyCloud project aims to inform a transplant-specific digital solution by exploring patient pathways and data journeys. This paper reports on the early prototyping of the KidneyCloud clinician interface using an iterative codesign methodology. User workshops identified that for making clinical decisions and adding patients to the national waiting list transplant teams relied heavily on manual processes to access data across systems and organisations. Based on the requirements gathered, a prototype interface was designed to provide a unified view on the available patient data, which aligned with clinical workflows. Interactive prototype screens allowed users to gain hands-on experience and provide rich real-time feedback. This informed the necessary functionalities of the interface, but also helped us understand the capabilities required of the back-end solution.

Argentina, Comprehensive Health Care, Humans, Latin America, Electronic Health Records, and HIV Infections

Updating electronic health record systems to meet new clinic needs and government regulations presents an ongoing challenge for health care organizations. To redesign an existing system for two HIV clinics in Argentina, we employed a three-phase approach of exploration, participatory design, and prototyping. The process and resulting architecture of the HIV-centered "RedClin" electronic health record may inform electronic health records at other clinics in Latin America and worldwide.

Cardiac Electrophysiology, Microtechnology, Prostheses and Implants, Electrophysiological Phenomena, and Neurosciences

New fabrication approaches for mechanically flexible implants hold the key to advancing the applications of neuroengineering in fundamental neuroscience and clinic. By combining the high precision of thin film microfabrication with the versatility of additive manufacturing, we demonstrate a straight-forward approach for the prototyping of intracranial implants with electrode arrays and microfluidic channels. We show that the implant can modulate neuronal activity in the hippocampus through localized drug delivery, while simultaneously recording brain activity by its electrodes. Moreover, good implant stability and minimal tissue response are seen one-week post-implantation. Our work shows the potential of hybrid fabrication combining different manufacturing techniques in neurotechnology and paves the way for a new approach to the development of multimodal implants.