articles+ search results

2,184 articles+ results

1 - 50
View results as:
Number of results to display per page

1. Microstructure simulation and experimental evaluation of the anisotropy of 316 L stainless steel manufactured by laser powder bed fusion [2023]

2. Inkjet four-dimensional printing of shape memory polymers: a review [2023]

3. On 3D printing of customized multi-root dental implants for the strategic tooth of canine by direct metal laser sintering [2023]

4. Thermo-fluid flow behavior of the IN718 molten pool in the laser directed energy deposition process under magnetic field [2023]

5. Customized production based on trusted 3D printing services in the cloud context [2023]

6. Prediction and validation of composite mechanical properties resulting from voxel-based microstructural design in material jetting [2023]

7. A comprehensive review on surface quality improvement methods for additively manufactured parts [2023]

8. Additive manufacturing of Ti-Al functionally graded material by laser based directed energy deposition [2023]

9. Compressive behavior of hollow triply periodic minimal surface cellular structures manufactured by selective laser melting [2023]

10. Preliminary color characterization of HP Multi Jet Fusion additive manufacturing with different orientations and surface finish [2023]

11. Effect of post-treatment on local mechanical properties of additively manufactured impellers made of maraging steel [2023]

12. Compensation of sintering deformation for components manufactured by metal binder jetting using numerical simulations [2023]

13. Impact of zirconia slurry in steel powder on melt pool characteristics in laser powder bed fusion [2023]

14. A sustainable formwork system based on ice pattern and sand mould for fabricating customised concrete components [2023]

15. A view similarity-based shape complexity metric to guide part selection for additive manufacturing [2023]

16. Industry 4.0 in textile and apparel sector: a systematic literature review [2023]

17. Investigation on the mechanical performance of mono-material vs multi-material interface geometries using fused filament fabrication [2023]

18. Compressive response of selective laser-melted lattice structures with different strut sizes based on theoretical, numerical and experimental approaches [2023]

19. Mixed-mode load bearing estimation of the cracked additively manufactured materials using stress/strain-based models [2023]

20. Modeling SEBM process of tantalum lattices [2023]

21. A new multiobjective optimization adaptive layering algorithm for 3D printing based on demand-oriented [2023]

22. Force-flow guided reinforcement design of homogeneous mesoscale structure in additive manufacturing [2023]

23. Impact energy absorption and fracture mechanism of FFF made fiberglass reinforced polymer composites [2023]

24. 3D-printed medical models supply chain: barriers modeling and analysis [2023]

25. A novel methodology to manufacture complex metallic sudden overhangs in weld-deposition based additive manufacturing [2023]

26. Thermal modeling of directed energy deposition additive manufacturing using graph theory [2023]

27. A graph-based path planning method for additive manufacturing of continuous fiber-reinforced planar thin-walled cellular structures [2023]

28. The effect of layer height and post-curing temperature on the shape memory properties of smart polymers in vat photopolymerization [2023]

29. Evaluation of Cu-Ti dissimilar interface characteristics for wire arc additive manufacturing process [2023]

30. Applying graded material transitions with low-cost additive manufacturing [2023]

31. Comparative study on the properties of 17-4 PH stainless steel parts made by metal fused filament fabrication process and atomic diffusion additive manufacturing [2023]

32. The development of a radial based integrated network for the modelling of 3D fused deposition [2023]

33. Mechanical properties assessment of a 3D printed composite under torsional and perpendicular stress [2023]

34. Design and 3D printing of a modular phantom of a uterus for medical device validation [2023]

35. Investigation of the effects of a pre-deposition heating system on the interfacial temperature and interlayer bonding strength for fused filament fabrication [2023]

36. Assessment and treatment of pectus deformities: a review of reverse engineering and 3D printing techniques [2023]

37. Overcoming the post-processing barriers for 3D-printed medical models [2023]

38. Additively manufactured foamed polylactic acid for lightweight structures [2023]

39. Ti6Al4V scaffolds fabricated by laser powder bed fusion with hybrid volumetric energy density [2023]

40. Offline laser power modulation in LPBF additive manufacturing including kinematic and technological constraints [2023]

41. Effect of build parameters and strain rate on mechanical properties of 3D printed PLA using DIC and desirability function analysis [2023]

42. Viability and development of multi-axis material extrusion products: a case study [2023]

43. Effect of direct aging and annealing on the microstructure and mechanical properties of AlSi10Mg fabricated by selective laser melting [2023]

44. An initial feasibility study into ray-based slicing for revolving thin-wall parts using a rotary 3D printer [2023]

45. The problem with printing pitch: challenges in designing 3D printed claves [2023]

46. Effects of 3D-printed PLA material with different filling densities on coefficient of friction performance [2023]

47. Parametric optimization for dimensional correctness of 3D printed part using masked stereolithography: Taguchi method [2023]

48. A study on the effects of internal architecture on the mechanical properties and mixed-mode fracture behavior of 3D printed CaCO3/ABS nanocomposite samples [2023]

49. Geometrical analysis in material extrusion process with polylactic acid (PLA)+carbon fiber [2022]

50. Multimaterial powder bed fusion techniques [2022]

Catalog

Books, media, physical & digital resources
See catalog results

Guides

Course- and topic-based guides to collections, tools, and services.
Search ""Prototyping"" in all guide pages