articles+ search results

6,447 articles+ results

View results as:
Number of results to display per page

1. TRIZ-based method for developing a conceptual laparoscopic surgeon’s chair

2. Multifunctional and multimaterial contact lenses: tailored solutions for tunable color filtering and tear pH sensing

3. Modelling, optimization, and testing of novel cuboidal spherical plate lattice structures

4. Development of a novel gantry system for cooperative printing of plastic materials

5. Wire-arc directed energy deposition of monolithic and bimetallic structures of maraging 250 steel

6. 17-4 PH and SS316L bimetallic structures via additive manufacturing

7. Deposition dynamics and analysis of polyurethane foam structure boundaries for aerial additive manufacturing

8. Modeling and application of droplet oscillation momentum for elucidating the development of surface roughness in wire-arc additive manufacturing

9. Manipulating melt pool thermofluidic transport in directed energy deposition driven by a laser intensity spatial shaping strategy

10. Sub-microscale 3D printing based on cold-constrained local electrodeposition

11. Heterogeneous grain structure in biodegradable Zn prepared via mechanical alloying and laser powder bed fusion for strength-plasticity synergy

12. Effect of heat treatment and electroless Ni-P coating on mechanical property and corrosion behaviour of 316L stainless steel fabricated by laser powder bed fusion

13. Effects of path patterns on residual stresses and deformations of directed energy deposition-arc built blocks

14. Multi-objective optimisation of process parameters for laser-based directed energy deposition of a mixture of H13 and M2 steel powders on 4Cr5Mo2SiV1 steel

15. Topology optimisation for vat photopolymerization 3D printing of ceramics with flushing jet accessibility constraint

16. Three-dimensional, soft magnetic-cored solenoids via multi-material extrusion

17. High-efficiency pentafluorostilbene-based photocatalysts dedicated to preparing fluorescent 3D printed polymer nanocomposites

18. Detection and quantitative evaluation of surface defects in wire and arc additive manufacturing based on 3D point cloud

19. Grain refinement of NiTi alloys during ultrasound-assisted wire-arc directed energy deposition

20. Co-continuous structure enhanced magnetic responsive shape memory PLLA/TPU blend fabricated by 4D printing

21. The role of controlled voids shape on the flexural properties of 3D printed food: an approach for tailoring their mechanical properties

22. Upgrading analytical models to predict the onset of degradation in selective laser sintering

23. Modelling and researching the evolution of stress during arc-directed energy deposition (ADED) hybrid inter-layer hammering

24. A multi-materials 3D-printed continuous conductive fibre-based metamaterial for broadband microwave absorption

25. The enhanced mechanical properties of laser powder bed fusion Al-Mn-Sc alloy via non-isothermal aging

26. Advancing the additive manufacturing of PLA-ZnO nanocomposites by fused filament fabrication

27. A novel model for directed energy deposition-arc based on in-order stacking of primitives

28. An integrated multiscale simulation guiding the processing optimisation for additively manufactured nickel-based superalloys

29. High-precision digital light processing (DLP) printing of microstructures for microfluidics applications based on a machine learning approach

30. Numerical modelling of the viscoelastic polymer melt flow in material extrusion additive manufacturing

31. Fabrication of functionalised graphene-PAEK nanocomposites for different manufacturing processes

32. Additively manufactured multi-functional metamaterials: low coefficient of thermal expansion and programmable Poisson’s ratio

33. Microstructure and property enhancement of 7075 aluminium alloy via laser metal deposition augmented by in-situ ultrasonic vibration

34. Direct wire writing technique benefitting the flexible electronics

35. Bluetooth dataset for proximity detection in indoor environments collected with smartphones

36. Mechanical response of tensegrity-origami solar modules

37. Design, synthesis and curing mechanism of two novel photothermal dual-curing adhesives for propellants and explosives

38. Methods for modeling and real-time visualization of CLIP and iCLIP-based 3D printing

39. Fabrication of Ba0.5Sr0.5TiO3 components combining rapid prototyping with gelcasting using different gelling systems

71. Rapid Prototyping of Thermoplastic Microfluidic 3D Cell Culture Devices by Creating Regional Hydrophilicity Discrepancy

72. Three Birds, One Stone: An Osteo‐Microenvironment Stage‐Regulative Scaffold for Bone Defect Repair through Modulating Early Osteo‐Immunomodulation, Middle Neovascularization, and Later Osteogenesis

73. A Design Language for Prototyping and Storyboarding Data-Driven Stories

74. Mathematical Analysis and Real-Time Control of a Novel 5-DOF Robotic System with a Parallel Kinematics Structure for Additive Manufacturing Technologies

75. Using Rapid Prototyping to Develop a Cell-Based Platform with Electrical Impedance Sensor Membranes for In Vitro RPMI2650 Nasal Nanotoxicology Monitoring

76. Numerical Modeling and Analysis of Transient and Three-Dimensional Heat Transfer in 3D Printing via Fused-Deposition Modeling (FDM)

77. Advanced Manufacturing for Sustainable Fashion. Developing Interdisciplinary Educational Experiences

78. Data Driven Design: From Environment to the Human Body

79. How Design Thinking Could Benefit Future Educational Environments in a Post-Pandemic Era?

80. A Review of Optical Sensors in CMOS

81. Adaptive Sliding Mode Control Based on a Radial Neural Model Applied for an Electric Drive with an Elastic Shaft

82. Evolution of prototyping in automotive engineering: a Comprehensive Study on the reliability of Additive Manufacturing for advanced powertrain components

83. A dynamic approach for visualizing and exploring concept hierarchies from textbooks

84. Cell-free protein synthesis for nonribosomal peptide synthetic biology

85. Printable devices for neurotechnology

86. Quantitative assessment on synchronisation capability of a line‐start permanent magnet synchronous motor with hybrid rotor

87. 4D radar simulator for human activity recognition

88. Innovative Maritime Uncrewed Systems and Satellite Solutions for Shallow Water Bathymetric Assessment

89. Co-Production of a Flexibly Delivered Relapse Prevention Tool to Support the Self-Management of Long-Term Mental Health Conditions: Co-Design and User Testing Study

90. Toward green ammonia synthesis – exploring the influence of lanthanide oxides as supports on the cobalt catalysts properties

91. Fabrication of an Optically Transparent Planar Inverted-F Antenna Using PEDOT-Based Silver Nanowire Clear Ink with Aerosol-Jet Printing Method towards Effective Antennas

92. An effective methodology for honing students' skills in building prototypes using modern modeling techniques in industrial design

93. Pysanky to Microfluidics: An Innovative Wax-Based Approach to Low Cost, Rapid Prototyping of Microfluidic Devices

94. Performance of Fabrics with 3D-Printed Photosensitive Acrylic Resin on the Surface

95. Road condition estimation using deep learning with hyperspectral images: detection of water and snow

96. Flexible and rigorous numerical modelling of multiphysics processes in fractured porous media using PorePy

97. A Novel Approach to Simulating Realistic Exoskeleton Behavior in Response to Human Motion

98. From bibliometric analysis: 3D printing design strategies and battery applications with a focus on zinc‐ion batteries

Catalog

Books, media, physical & digital resources

Guides

Course- and topic-based guides to collections, tools, and services.