articles+ search results

1,878 articles+ results

1 - 100
View results as:
Number of results to display per page

1. Electrothermal response optimization of nozzle structure for multi-material rapid prototyping based on fuzzy adaptive control [2022]

  • Xu, Jinghua, Liu, Kunqian, Liu, Zhi, Zhang, Fuqiang, Zhang, Shuyou, and Tan, Jianrong
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 6, pp. 1168-1181.

2. Hydroxyapatite composite scaffold for bone regeneration via rapid prototyping technique: a review [2022]

  • Sun, Fangfang, Wang, Tianze, and Yang, Yong
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 3, pp. 585-605.

3. Volumetric adaptive slicing of manifold mesh for rapid prototyping based on relative volume error [2022]

  • QianyongChen, JinghuaXu, and ShuyouZhang
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 3, pp. 606-626.

4. Characterization of 3d printing filaments applied in restoration of sensitive archaeological objects using rapid prototyping [2021]

  • Aura-Castro, Elvira, Díaz-Marín, Carmen, Mas-Barberà, Xavier, Sánchez, Miguel, and Vendrell Vidal, Eduardo
  • Rapid Prototyping Journal, 2021, Vol. 27, Issue 4, pp. 645-657.

5. 4D-printed parametric façade in architecture: prototyping a self-shaping skin using programmable two-way shape memory composite (TWSMC) [2022]

  • Yi, Hwang
  • Engineering, Construction and Architectural Management, 2021, Vol. 29, Issue 10, pp. 4132-4152.

6. 4D-textiles: development of bistable textile structures using rapid prototyping and the bionic approach [2022]

  • Schmidt, Ann-Malin, Schmelzeisen, David, and Gries, Thomas
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 8, pp. 1589-1597.

7. Mechanical meta-material-based polymer skin graft production by rapid prototyping and replica method [2021]

  • Attar, Mohamad, Aydin, Seher Selen, Arabaci, Aliye, and Mutlu, Ilven
  • Rapid Prototyping Journal, 2020, Vol. 27, Issue 2, pp. 278-287.

8. Concept evaluation in new product development : A set-based method utilizing rapid prototyping and physical modelling [2020]

  • Blindheim, Jørgen, Elverum, Christer W., Welo, Torgeir, and Steinert, Martin
  • Journal of Engineering, Design and Technology, 2020, Vol. 18, Issue 5, pp. 1139-1151.

9. Design and prototyping of GSM-bluetooth based solar energy remote monitoring system [2022]

  • Kerem, Alper and Yazgan, Abdusselam
  • COMPEL -The international journal for computation and mathematics in electrical and electronic engineering, 2021, Vol. 41, Issue 4, pp. 1072-1083.

10. Evaluation of a rapid prototyping application for stomas [2020]

  • Sierra, Jose Manuel, Rodríguez, Jose Ignacio, Villazon, Marta María, Cortizo, Jose Luis, and Fernandez, Maria del Rocio
  • Rapid Prototyping Journal, 2020, Vol. 26, Issue 9, pp. 1525-1533.

11. Design fiction diegetic prototyping: a research framework for visualizing service innovations [2020]

  • Harwood, Tracy, Garry, Tony, and Belk, Russell
  • Journal of Services Marketing, 2020, Vol. 34, Issue 1, pp. 59-73.

12. Prototyping an IoT-based system for monitoring building indoor environment [2022]

  • Zhou, Na, Chang-Richards, Alice, Wang, Kevin I-Kai, and Dirks, Kim Natasha
  • Journal of Engineering, Design and Technology, 2022, Vol. 20, Issue 4, pp. 965-992.

13. Systematic design of nonlinear ADRC for laser seeker system with FPGA-based rapid prototyping validation [2022]

  • Ferdjali, Abdellah, Stanković, Momir, Manojlović, Stojadin, Madonski, Rafal, Bujaković, Dimitrije, and Djenadbia, Abderraouf
  • Aircraft Engineering and Aerospace Technology, 2022, Vol. 94, Issue 7, pp. 1087-1099.

14. A rapid prototyping-based methodology for patient-specific contouring of osteotomy plates [2019]

  • Gomari, Behnam, Farahmand, Farzam, and Farkhondeh, Hassan
  • Rapid Prototyping Journal, 2019, Vol. 25, Issue 5, pp. 888-894.

15. Economic sustainability of additive manufacturing : Contextual factors driving its performance in rapid prototyping [2019]

  • Khorram Niaki, Mojtaba, Nonino, Fabio, Palombi, Giulia, and Torabi, S. Ali
  • Journal of Manufacturing Technology Management, 2018, Vol. 30, Issue 2, pp. 353-365.

16. The role of additive technologies in the prototyping issues of design [2018]

  • Carfagni, Monica, Fiorineschi, Lorenzo, Furferi, Rocco, Governi, Lapo, and Rotini, Federico
  • Rapid Prototyping Journal, 2018, Vol. 24, Issue 7, pp. 1101-1116.

17. Rapid prototyping eddy current sensors using 3D printing [2018]

  • Li, Bo, Meng, Lifan, Wang, Hongyu, Li, Jing, and Liu, Chunmei
  • Rapid Prototyping Journal, 2018, Vol. 24, Issue 1, pp. 106-113.

18. Direct global editing of STL mesh model for product design and rapid prototyping [2017]

  • Adhikary, N. and Gurumoorthy, B.
  • Rapid Prototyping Journal, 2017, Vol. 23, Issue 4, pp. 781-795.

19. Rapid prototyping assisted fabrication of customized surgical guides in mandibular distraction osteogenesis: a case report [2017]

  • Dahake, Sandeep W., Kuthe, Abhaykumar M., Chawla, Jitendra, and Mawale, Mahesh B.
  • Rapid Prototyping Journal, 2017, Vol. 23, Issue 3, pp. 602-610.

20. Mechanical properties of urethane diacrylate/bamboo powder composite fabricated by rapid prototyping system [2016]

  • Chiu, Shih-Hsuan, Ivan, Ivan, Wu, Cheng-Lung, Chen, Kun-Ting, Wicaksono, Sigit Tri, and Takagi, Hitoshi
  • Rapid Prototyping Journal, 2016, Vol. 22, Issue 4, pp. 676-683.

21. Applications of medical rapid prototyping assisted customized surgical guides in complex surgeries [2016]

  • Dahake, Sandeep W., Kuthe, Abhaykumar M., Mawale, Mahesh B., and Bagde, Ashutosh D.
  • Rapid Prototyping Journal, 2016, Vol. 22, Issue 6, pp. 934-946.

22. Evaluation of thiol-ene photo-curable resins using in rapid prototyping [2016]

  • Zhou, Jian, Zhang, Qiuyu, Zhang, Hepeng, Tan, Jiaojun, Chen, Shaojie, Liu, Qing, Ma, Mingliang, and Xin, Tiejun
  • Rapid Prototyping Journal, 2016, Vol. 22, Issue 3, pp. 465-473.

23. Rapid prototyping in the intervertebral implant design process [2015]

  • Janusz Domanski, Konstanty Skalski, Roman Grygoruk, and Adrian Mróz
  • Rapid Prototyping Journal, 2015, Vol. 21, Issue 6, pp. 735-746.

24. Global adaptive slicing of NURBS based sculptured surface for minimum texture error in rapid prototyping [2015]

  • S. Sikder, A. Barari, and H.A. Kishawy
  • Rapid Prototyping Journal, 2015, Vol. 21, Issue 6, pp. 649-661.

25. Application of improved complex proportional assessment (COPRAS) method for rapid prototyping system selection [2015]

  • M. A. Makhesana
  • Rapid Prototyping Journal, 2015, Vol. 21, Issue 6, pp. 671-674.

26. Application of curved layer manufacturing for preservation of randomly located minute critical surface features in rapid prototyping [2015]

  • Yashpal Patel, Aashish Kshattriya, Sarat B Singamneni, and A. Roy Choudhury
  • Rapid Prototyping Journal, 2015, Vol. 21, Issue 6, pp. 725-734.

27. Combining rapid prototyping techniques in mechanical engineering and electronics for realization of a variable capacitor [2014]

  • Stojanović, Goran, Mandić, Vesna, Ćurčić, Milan, Vasiljević, Dragana, Kisić, Milica, and Radosavljević, Nikola
  • Rapid Prototyping Journal, 2014, Vol. 20, Issue 2, pp. 115-120.

28. Modeling and prototyping of a soft closed-chain modular gripper [2019]

  • Anwar, Muddasar, Khawli, Toufik Al, Hussain, Irfan, Gan, Dongming, and Renda, Federico
  • Industrial Robot: the international journal of robotics research and application, 2019, Vol. 46, Issue 1, pp. 135-145.

29. Rapid prototyping-assisted fabrication of the customized metatarsophalangeal joint implant (SamKu) : A case report [2014]

  • C. Raghatate, Sameer, M. Kuthe, Abhaykumar, R. Deshmukh, Tushar, and W. Dahake, Sandeep
  • Rapid Prototyping Journal, 2014, Vol. 20, Issue 4, pp. 270-279.

30. Basics and applications of rapid prototyping medical models [2014]

  • Negi, Sushant, Dhiman, Suresh, and Kumar Sharma, Rajesh
  • Rapid Prototyping Journal, 2014, Vol. 20, Issue 3, pp. 256-267.

31. State-of-the-art in empirical modelling of rapid prototyping processes [2014]

  • Garg, A., Tai, K., and Savalani, M.M.
  • Rapid Prototyping Journal, 2014, Vol. 20, Issue 2, pp. 164-178.

32. Development of SVM rapid prototyping for scaffold fabrication [2014]

  • Phattanaphibul, Thittikorn, Koomsap, Pisut, Idram, Irwansyah, and Nachaisit, Suchart
  • Rapid Prototyping Journal, 2014, Vol. 20, Issue 2, pp. 90-104.

33. From “ethics of the eye” to “ethics of the hand” by collaborative prototyping [2014]

  • Christiansen, Ellen
  • Journal of Information, Communication and Ethics in Society, 2014, Vol. 12, Issue 1, pp. 3-9.

34. Iterative prototyping of strategy implementation workshop design [2018]

  • Kryger, Anders
  • Journal of Strategy and Management, 2018, Vol. 11, Issue 2, pp. 166-183.

35. The use of rapid prototyping in the joining of fractured historical silver object [2018]

  • Seixas, Maria Luiza, Assis, Paulo Santos, Figueiredo, João Cura D’Ars, Jr., Pinto, Maria Aparecida, and Paula, Daniella Gualberto Caldeira
  • Rapid Prototyping Journal, 2018, Vol. 24, Issue 3, pp. 532-538.

36. Design and manufacture methods of rapid prototyping wind‐tunnel models based on photopolymer‐resin [2013]

  • Dang‐guo, Yang, Yan, Sun, Zheng‐yu, Zhang, Chao, Wang, and Wei‐jun, Zhu
  • Rapid Prototyping Journal, 2013, Vol. 19, Issue 1, pp. 20-27.

37. Remotely Accessible Rapid Prototyping Laboratory: design and implementation framework [2012]

  • Fidan, Ismail
  • Rapid Prototyping Journal, 2012, Vol. 18, Issue 5, pp. 344-352.

38. Dynamic crack propagation and arrest in rapid prototyping material [2012]

  • Ibrahim, Umar and Irfan, Mohammad A.
  • Rapid Prototyping Journal, 2012, Vol. 18, Issue 2, pp. 154-160.

39. Design and prototyping of the novel axial flux-switching permanent-magnet motor [2018]

  • Rahmani Fard, Javad and Ardebili, Mohammad
  • COMPEL -The international journal for computation and mathematics in electrical and electronic engineering, 2018, Vol. 37, Issue 2, pp. 890-910.

40. Analysis, optimization and prototyping of a parallel RCM mechanism of a surgical robot for craniotomy surgery [2018]

  • Dehghani, Mohammadreza, Mohammadi Moghadam, Majid, and Torabi, Pourya
  • Industrial Robot: An International Journal, 2017, Vol. 45, Issue 1, pp. 78-88.

41. Quantitative assessments of geometric errors for rapid prototyping in medical applications [2012]

  • Arrieta, Cristobal, Uribe, Sergio, Ramos‐Grez, Jorge, Vargas, Alex, Irarrazaval, Pablo, Parot, Vicente, and Tejos, Cristian
  • Rapid Prototyping Journal, 2012, Vol. 18, Issue 6, pp. 431-442.

42. Feasibility study on accurate rapid prototyping for human hand bones and affiliated artery [2017]

  • Ji, Dafeng, Wang, Peng, Zhang, Xinhua, and Chen, Xinrong
  • Rapid Prototyping Journal, 2017, Vol. 23, Issue 1, pp. 96-100.

43. The use of virtual prototyping for hazard identification in the early design stage [2012]

  • King Chun, Chan, Li, Heng, and Skitmore, Martin
  • Construction Innovation, 2012, Vol. 12, Issue 1, pp. 29-42.

44. Rapid prototyping assisted fabrication of the customised temporomandibular joint implant: a case report [2011]

  • Deshmukh, T.R., Kuthe, A.M., Chaware, S.M., Vaibhav, B., and Ingole, D.S.
  • Rapid Prototyping Journal, 2011, Vol. 17, Issue 5, pp. 362-368.

45. The use of virtual prototyping to rehearse the sequence of construction work involving mobile cranes [2012]

  • Li, Heng, Chan, Neo K.Y., and Skitmore, Martin
  • Construction Innovation, 2012, Vol. 12, Issue 4, pp. 429-446.

46. Statistical modeling and minimization of form error in SLS prototyping [2012]

  • Senthilkumaran, K., Pandey, P.M., and Rao, P.V.M.
  • Rapid Prototyping Journal, 2012, Vol. 18, Issue 1, pp. 38-48.

47. Investigating the friction coefficient in functionally graded rapid prototyping of Al–Al2O3 composite prepared by fused deposition modelling [2017]

  • Singh, Rupinder and Singh, Sunpreet
  • Assembly Automation, 2017, Vol. 37, Issue 2, pp. 154-161.

48. The use of rapid prototyping techniques (RPT) to manufacture micro channels suitable for high operation pressures and μPIV [2016]

  • Josep Farré-Lladós, Jasmina Casals-Terré, Jordi Voltas, and Lars G. Westerberg
  • Rapid Prototyping Journal, 2016, Vol. 22, Issue 1, pp. 67-76.

49. Rapid prototyping – a technology transfer approach for development of rapid tooling [2009]

  • Sahebrao Ingole, Dilip, Madhusudan Kuthe, Abhay, Thakare, Shashank B., and Talankar, Amol S.
  • Rapid Prototyping Journal, 2009, Vol. 15, Issue 4, pp. 280-290.

50. Virtual Prototyping for Open Building Design [2011]

  • ŞEule TaşlıPektaş and Özgüç, Bülent
  • Open House International, 2011, Vol. 36, Issue 4, pp. 46-56.

51. A study of photomask correction method in area‐forming rapid prototyping system [2008]

  • Chiu, Shih‐Hsuan, Pong, Sheng‐Hong, Wu, Dien‐Chi, and Lin, Chien‐Hung
  • Rapid Prototyping Journal, 2008, Vol. 14, Issue 5, pp. 285-292.

52. 3D restitution, restoration and prototyping of a medieval damaged skull [2008]

  • Fantini, Massimiliano, de Crescenzio, Francesca, Persiani, Franco, Benazzi, Stefano, and Gruppioni, Giorgio
  • Rapid Prototyping Journal, 2008, Vol. 14, Issue 5, pp. 318-324.

53. Investigation of an electrophotography based rapid prototyping technology [2003]

  • Kumar, Ashok V. and Dutta, Anirban
  • Rapid Prototyping Journal, 2003, Vol. 9, Issue 2, pp. 95-103.

54. Prototyping, customer involvement, and speed of information dissemination in new product success [2016]

  • Tih, Siohong, Wong, Kok-Kee, Lynn, Gary S., and Reilly, Richard R.
  • Journal of Business & Industrial Marketing, 2016, Vol. 31, Issue 4, pp. 437-448.

55. Rapid prototyping process selection using multi criteria decision making considering environmental criteria and its decision support system [2016]

  • KEK, Vimal, S., Vinodh, P., Brajesh, and R., Muralidharan
  • Rapid Prototyping Journal, 2016, Vol. 22, Issue 2, pp. 225-250.

56. Investigation of electroless nickel plating on rapid prototyping material of acrylic resin [2016]

  • Janaka Chandraguptha Rajaguru, Mike Duke, and ChiKit Au
  • Rapid Prototyping Journal, 2016, Vol. 22, Issue 1, pp. 162-169.

57. A dexel‐based virtual prototyping system for product development [2002]

  • Choi, S.H. and Chan, A.M.M.
  • Rapid Prototyping Journal, 2002, Vol. 8, Issue 5, pp. 300-314.

58. Visualisation of rapid prototyping [2001]

  • Choi, S.H. and Samavedam, S.
  • Rapid Prototyping Journal, 2001, Vol. 7, Issue 2, pp. 99-114.

59. Development of a web‐based tele‐manufacturing service system for rapid prototyping [2006]

  • Liu, Xiao‐guang, Jin, Ye, and Xi, Jun‐tong
  • Journal of Manufacturing Technology Management, 2006, Vol. 17, Issue 3, pp. 303-314.

60. HyCon: virtual prototyping in hybrid concrete construction frame design [2006]

  • Zhang, X., Goulding, J.S., Sexton, M.G., Aouad, G., and Kagioglou, M.
  • Construction Innovation, 2006, Vol. 6, Issue 1, pp. 47-60.

61. Design for medical rapid prototyping of cranioplasty implants [2003]

  • Hieu, L.C., Bohez, E., Vander Sloten, J., Phien, H.N., Vatcharaporn, E., Binh, P.H., An, P.V., and Oris, P.
  • Rapid Prototyping Journal, 2003, Vol. 9, Issue 3, pp. 175-186.

62. The customized mandible substitute based on rapid prototyping [2003]

  • Yaxiong, Liu, Dichen, Li, Bingheng, Lu, Sanhu, He, and Gang, Li
  • Rapid Prototyping Journal, 2003, Vol. 9, Issue 3, pp. 167-174.

63. Rapid prototyping for treatment of canine limb deformities [2003]

  • Harrysson, Ola L.A., Cormier, Denis R., Marcellin‐Little, Denis J., and Jajal, Ketan
  • Rapid Prototyping Journal, 2003, Vol. 9, Issue 1, pp. 37-42.

64. A study on effects of process parameters in rapid freeze prototyping [2003]

  • Bryant, Frances D., Sui, Guanghua, and Leu, Ming C.
  • Rapid Prototyping Journal, 2003, Vol. 9, Issue 1, pp. 19-23.

65. Smoothing STL files by Max‐Fit biarc curves for rapid prototyping [2000]

  • Koc, Bahattin, Ma, Yawei, and Lee, Yuan‐Shin
  • Rapid Prototyping Journal, 2000, Vol. 6, Issue 3, pp. 186-205.

66. Rapid prototyping for architectural models [2002]

  • Gibson, Ian, Kvan, Thomas, and Wai Ming, Ling
  • Rapid Prototyping Journal, 2002, Vol. 8, Issue 2, pp. 91-95.

67. The role of rapid prototyping in the product development process: A case study on the ergonomic factors of handheld video games [2002]

  • Lopez, Samuel M. and Wright, Paul K.
  • Rapid Prototyping Journal, 2002, Vol. 8, Issue 2, pp. 116-125.

68. Prosthetic sockets fabrication using rapid prototyping technology [2002]

  • Ng, P., Lee, P.S.V., and Goh, J.C.H.
  • Rapid Prototyping Journal, 2002, Vol. 8, Issue 1, pp. 53-59.

69. Algorithms for accurate rapid prototyping replication of cancellous bone voxel maps [2002]

  • Sisias, G., Phillips, R., Dobson, C.A., Fagan, M.J., and Langton, C.M.
  • Rapid Prototyping Journal, 2002, Vol. 8, Issue 1, pp. 6-24.

70. Rapid prototyping and art [1999]

  • Rees, Michael
  • Rapid Prototyping Journal, 1999, Vol. 5, Issue 4, pp. 154-167.

71. Standards for the rapid prototyping industry [1999]

  • Jurrens, Kevin K.
  • Rapid Prototyping Journal, 1999, Vol. 5, Issue 4, pp. 169-178.

72. Path planning in the Proteus rapid prototyping system [2001]

  • Tarabanis, Konstantinos A.
  • Rapid Prototyping Journal, 2001, Vol. 7, Issue 5, pp. 241-252.

73. Rapid prototyping for direct manufacture [2001]

  • Hopkinson, Neil and Dickens, Phill
  • Rapid Prototyping Journal, 2001, Vol. 7, Issue 4, pp. 197-202.

74. Rapid prototyping integrated systems [2001]

  • Onuh, S.O.
  • Rapid Prototyping Journal, 2001, Vol. 7, Issue 4, pp. 220-223.

75. An easy rapid prototyping technique with point cloud data [2001]

  • Pal, Pralay
  • Rapid Prototyping Journal, 2001, Vol. 7, Issue 2, pp. 82-90.

76. A comparison of rapid prototyping techniques used for wind tunnel model fabrication [1998]

  • Chuk, Raymond N. and Thomson, Vincent J.
  • Rapid Prototyping Journal, 1998, Vol. 4, Issue 4, pp. 185-196.

77. Piezoelectric ceramics and composites via rapid prototyping techniques [1998]

  • Bandyopadhyay, A., Panda, R.K., McNulty, T.F., Mohammadi, F., Danforth, S.C., and Safari, A.
  • Rapid Prototyping Journal, 1998, Vol. 4, Issue 1, pp. 37-49.

78. Rapid prototyping gains speed, volume and precision [2000]

  • Kochan, Anna
  • Assembly Automation, 2000, Vol. 20, Issue 4, pp. 295-299.

79. Rapid prototyping of small size objects [2000]

  • Bertsch, Arnaud, Bernhard, Paul, Vogt, Christian, and Renaud, Philippe
  • Rapid Prototyping Journal, 2000, Vol. 6, Issue 4, pp. 259-266.

80. Surface macro‐texture design for rapid prototyping [2000]

  • Jee, Haeseong and Sachs, Emanuel
  • Rapid Prototyping Journal, 2000, Vol. 6, Issue 1, pp. 50-60.

81. Integrated rapid prototyping and rapid tooling (IRPRT) [2002]

  • Folkestad, James E. and Johnson, Russell L.
  • Integrated Manufacturing Systems, 2002, Vol. 13, Issue 2, pp. 97-103.

82. The business of rapid prototyping [1999]

  • Smith, Preston G.
  • Rapid Prototyping Journal, 1999, Vol. 5, Issue 4, pp. 179-186.

83. Low cost prototyping of multichip modules ‐ the European INCO‐Copernicus project [1999]

  • Illyefalvi‐Vitéz, Zsolt, Vervaet, Alfons, Van Calster, André, Sinnadurai, Nihal, Hrovat, Marko, Svasta, Paul, Tóth, Endre, Belavic, Darko, Mihai Ionescu, Radu, and Dennehy, William
  • Microelectronics International: An International Journal, 1999, Vol. 16, Issue 2, pp. 13-19.

84. Considerations and selection of optimal orientation for different rapid prototyping systems [1999]

  • Xu, F., Loh, H.T., and Wong, Y.S.
  • Rapid Prototyping Journal, 1999, Vol. 5, Issue 2, pp. 54-60.

85. Integrating rapid prototyping into the engineering curriculum ‐ a case study [1997]

  • Helge Bøhn, Jan
  • Rapid Prototyping Journal, 1997, Vol. 3, Issue 1, pp. 32-37.

86. Application of direct bonded copper substrates for prototyping of power electronic modules [2016]

  • Wojciech Grzesiak, Piotr Maćków, Tomasz Maj, Beata Synkiewicz, Krzysztof Witek, Ryszard Kisiel, Marcin Myśliwiec, Janusz Borecki, Tomasz Serzysko, and Marek Żupnik
  • Circuit World, 2016, Vol. 42, Issue 1, pp. 23-31.

87. Virtual prototyping for customized product development [1998]

  • Tseng, Mitchell M., Jiao, Jianxin, and Su, Chuan‐Jun
  • Integrated Manufacturing Systems, 1998, Vol. 9, Issue 6, pp. 334-343.

88. Motion compensation for five‐axis rapid prototyping system [1998]

  • Ng, Peow, Fang, Wei, Li, Bo, Zou, Jiguo, and Gong, Haiqing
  • Rapid Prototyping Journal, 1998, Vol. 4, Issue 2, pp. 68-76.

89. A discussion on the concept of a flexible rapid prototyping cell [1996]

  • Gibson, Ian
  • Rapid Prototyping Journal, 1996, Vol. 2, Issue 2, pp. 32-38.

90. Intelligent rapid prototyping with fused deposition modelling [1996]

  • Masood, Syed H.
  • Rapid Prototyping Journal, 1996, Vol. 2, Issue 1, pp. 24-33.

91. Robotyping – new rapid prototyping processes for sand moulds using industrial robots [2000]

  • Schaaf, Walter
  • Assembly Automation, 2000, Vol. 20, Issue 4, pp. 321-329.

92. Rapid prototyping: a key to fast tracking design to manufacture [2000]

  • Graham, Simon
  • Assembly Automation, 2000, Vol. 20, Issue 4, pp. 291-294.

93. How rapid prototyping can assist in the development of new orthopaedic products ‐ a case study [1995]

  • Jamieson, R., Holmer, B., and Ashby, A.
  • Rapid Prototyping Journal, 1995, Vol. 1, Issue 4, pp. 38-41.

94. Future potential of rapid prototyping and manufacturing around the world [1995]

  • Wohlers, Terry
  • Rapid Prototyping Journal, 1995, Vol. 1, Issue 1, pp. 4-10.

95. Rapid prototyping: current technology and future potential [1995]

  • Hull, Charles, Feygin, Michael, Baron, Yehudah, Sanders, Roy, Sachs, Emanuel, Lightman, Allan, and Wohlers, Terry
  • Rapid Prototyping Journal, 1995, Vol. 1, Issue 1, pp. 11-19.

96. Rapid prototyping in Singapore: 1988 to 1997 [1997]

  • Chee Kai, Chua and Kah Fai, Leong
  • Rapid Prototyping Journal, 1997, Vol. 3, Issue 3, pp. 116-119.

97. Technology forecast on ink‐jet head technology applications in rapid prototyping [1997]

  • Carrión, Alejandro
  • Rapid Prototyping Journal, 1997, Vol. 3, Issue 3, pp. 99-115.

98. Study on multifunctional rapid prototyping manufacturing system [1998]

  • Yan, Yongnian, Zhang, Renji, Lu, Qingping, and Du, Zhaohui
  • Integrated Manufacturing Systems, 1998, Vol. 9, Issue 4, pp. 236-241.

99. New slant in rapid prototyping [1996]

  • Kochan, Anna
  • Assembly Automation, 1996, Vol. 16, Issue 4, pp. 26-29.

100. Rapid prototyping from a computer scientist’s point of view [1996]

  • Dolenc, A. and Mäkelä, I.
  • Rapid Prototyping Journal, 1996, Vol. 2, Issue 2, pp. 18-25.

Catalog

Books, media, physical & digital resources
See catalog results

Guides

Course- and topic-based guides to collections, tools, and services.
Search ""Prototyping"" in all guide pages
1 - 100