articles+ search results

4,788 articles+ results

1 - 50
View results as:
Number of results to display per page

1. 3D-printed microneedle-based potentiometric sensor for pH monitoring in skin interstitial fluid [2023]

  • Parrilla, Marc, Vanhooydonck, Andres, Johns, Maby, Watts, Regan, and De Wael, Karolien
  • Sensors & Actuators: B. Chemical. March 1, 2023, Vol. 378

2. Portable smartphone integrated 3D-Printed electrochemical sensor for nonenzymatic determination of creatinine in human urine [2023]

  • Teekayupak, Kanyapat, Aumnate, Chuanchom, Lomae, Atchara, Preechakasedkit, Pattarachaya, Henry, Charles S., Chailapakul, Orawon, and Ruecha, Nipapan
  • Talanta. March 1, 2023, Vol. 254

3. Virtual prototyping and characterization of a point-of-entry UV-LED water disinfection reactor with the synergic effect of radiation, hydrodynamics, and inactivation kinetics [2023]

  • Mohaghegh Montazeri, Mahyar and Taghipour, Fariborz
  • Water Research. February 15, 2023, Vol. 230

4. Correction to: Development of shuttle vectors for rapid prototyping of engineered Synechococcus sp. PCC7002 [2023]

  • Yuan, Jifeng, Cheng, Jie, Fan, Cong, Wu, Peiling, Zhang, Yang, Cao, Mingfeng, and Shi, Tuo
  • Applied Microbiology and Biotechnology. February, 2023, Vol. 107 Issue 2-3, p985, 1 p.

5. Conformable neural interface based on off-stoichiometry thiol-ene-epoxy thermosets [2023]

  • Borda, Eleonora, Medagoda, Danashi Imani, Airaghi Leccardi, Marta Jole Ildelfonsa, Zollinger, Elodie Geneviève, and Ghezzi, Diego
  • Biomaterials. February, 2023, Vol. 293

6. Design thinking competence as self-perceived by nursing students in Taiwan: A cross-sectional study [2023]

  • Liu, Hsing-Yuan
  • Nurse Education Today. February, 2023, Vol. 121

7. Studies from University of North Carolina at Chapel Hill and North Carolina State University Update Current Data on Sensor Research (A Rapid Prototyping Method for Sub-MHz Single-Element Piezoelectric Transducers by Using 3D-Printed Components) [2023]

  • Obesity, Fitness & Wellness Week. January 28, 2023, 914

8. Compressive response of selective laser-melted lattice structures with different strut sizes based on theoretical, numerical and experimental approaches [2023]

  • Huang, Xina, Ding, Shoubin, Lang, Lihui, and Gong, Shuili
  • Rapid Prototyping Journal, 2023, Vol. 29, Issue 2, pp. 209-217.

9. Mixed-mode load bearing estimation of the cracked additively manufactured materials using stress/strain-based models [2023]

  • Ameri, Behnam, Taheri-Behrooz, Fathollah, Majidi, Hamid Reza, and Mohammad Aliha, Mohammad Reza
  • Rapid Prototyping Journal, 2022, Vol. 29, Issue 2, pp. 218-231.

10. Modeling SEBM process of tantalum lattices [2023]

  • Yue, Mingkai, Li, Meie, An, Ning, Yang, Kun, Wang, Jian, and Zhou, Jinxiong
  • Rapid Prototyping Journal, 2022, Vol. 29, Issue 2, pp. 232-245.

11. A new multiobjective optimization adaptive layering algorithm for 3D printing based on demand-oriented [2023]

  • Wang, Xiaoqi, Cao, Jianfu, and Cao, Ye
  • Rapid Prototyping Journal, 2022, Vol. 29, Issue 2, pp. 246-258.

12. Force-flow guided reinforcement design of homogeneous mesoscale structure in additive manufacturing [2023]

  • Yu, Ying, Huang, Huan, Wang, Shuo, Li, Shuaishuai, and Wang, Yu
  • Rapid Prototyping Journal, 2022, Vol. 29, Issue 2, pp. 259-274.

13. Impact energy absorption and fracture mechanism of FFF made fiberglass reinforced polymer composites [2023]

  • Prajapati, Ashish R., Dave, Harshit K., and Raval, Harit K.
  • Rapid Prototyping Journal, 2022, Vol. 29, Issue 2, pp. 275-287.

14. 3D-printed medical models supply chain: barriers modeling and analysis [2023]

  • Verma, Virendra Kumar, Kamble, Sachin S., and Ganapathy, L.
  • Rapid Prototyping Journal, 2022, Vol. 29, Issue 2, pp. 288-311.

15. A novel methodology to manufacture complex metallic sudden overhangs in weld-deposition based additive manufacturing [2023]

  • Panchagnula, Jayaprakash Sharma and Simhambhatla, Suryakumar
  • Rapid Prototyping Journal, 2022, Vol. 29, Issue 2, pp. 312-323.

16. Thermal modeling of directed energy deposition additive manufacturing using graph theory [2023]

  • Riensche, Alex, Severson, Jordan, Yavari, Reza, Piercy, Nicholas L., Cole, Kevin D., and Rao, Prahalada
  • Rapid Prototyping Journal, 2022, Vol. 29, Issue 2, pp. 324-343.

17. A graph-based path planning method for additive manufacturing of continuous fiber-reinforced planar thin-walled cellular structures [2023]

  • Zhang, Guoquan, Wang, Yaohui, He, Jian, and Xiong, Yi
  • Rapid Prototyping Journal, 2022, Vol. 29, Issue 2, pp. 344-353.

18. The effect of layer height and post-curing temperature on the shape memory properties of smart polymers in vat photopolymerization [2023]

  • Danielak, Anna, Chauhan, Siddharth Singh, Islam, Aminul, Andrzejewski, Jacek, and Pedersen, David Bue
  • Rapid Prototyping Journal, 2022, Vol. 29, Issue 2, pp. 354-365.

19. Evaluation of Cu-Ti dissimilar interface characteristics for wire arc additive manufacturing process [2023]

  • Mishra, Avinash, Paul, Amrit Raj, Mukherjee, Manidipto, Singh, Rabesh Kumar, and Sharma, Anuj Kumar
  • Rapid Prototyping Journal, 2022, Vol. 29, Issue 2, pp. 366-377.

20. Applying graded material transitions with low-cost additive manufacturing [2023]

  • Brauer, Cole and Aukes, Daniel
  • Rapid Prototyping Journal, 2022, Vol. 29, Issue 2, pp. 378-392.

21. Comparative study on the properties of 17-4 PH stainless steel parts made by metal fused filament fabrication process and atomic diffusion additive manufacturing [2023]

  • Lavecchia, Fulvio, Pellegrini, Alessandro, and Galantucci, Luigi Maria
  • Rapid Prototyping Journal, 2022, Vol. 29, Issue 2, pp. 393-407.

22. The development of a radial based integrated network for the modelling of 3D fused deposition [2023]

  • AlAlaween, Wafa', Abueed, Omar, Gharaibeh, Belal, Alalawin, Abdallah, Mahfouf, Mahdi, Alsoussi, Ahmad, and Albashabsheh, Nibal
  • Rapid Prototyping Journal, 2022, Vol. 29, Issue 2, pp. 408-421.

23. Study Data from University of Notre Dame Update Understanding of Technology (A home-made pipette droplet microfluidics rapid prototyping and training kit for digital PCR, microorganism/cell encapsulation and controlled microgel synthesis) [2023]

  • Life Science Weekly. January 24, 2023, 5532

24. Reports Outline Biofuel Study Findings from Grenoble INP (Simulation of Biogas Conversion Using Porous Solid Oxide Electrochemical Cells: Virtual Prototyping) [2023]

  • Biotech Week. January 11, 2023, 382

25. State Intellectual Property Office of China Receives Chongqing Central Du Institute of Biological Res's Patent Application for in-Situ Rapid Prototyping Hydrogel Skin Application and Preparation Method Thereof [2023]

  • Global IP News: Medical Patent News. January 3, 2023

26. Islamic University of Technology Reports Findings in Education and Information Technology (Instructional design with ADDIE and rapid prototyping for blended learning: validation and its acceptance in the context of TVET Bangladesh) ( design with ...) [2023]

  • Information Technology Newsweekly. January 3, 2023, 340

27. Mechanical properties assessment of a 3D printed composite under torsional and perpendicular stress [2023]

  • Lovo, João Fiore Parreira, Gerlin Neto, Vicente, Piedade, Lucas Pereira, Massa, Renan Cesar, Pintão, Carlos Alberto, Foschini, Cesar Renato, and Fortulan, Carlos Alberto
  • Rapid Prototyping Journal, 2022, Vol. 29, Issue 1, pp. 1-8.

28. Design and 3D printing of a modular phantom of a uterus for medical device validation [2023]

  • Candidori, Sara, Graziosi, Serena, Russo, Paola, Osouli, Kasra, De Gaetano, Francesco, Zanini, Alberto Antonio, and Costantino, Maria Laura
  • Rapid Prototyping Journal, 2023, Vol. 29, Issue 11, pp. 7-20.

29. Investigation of the effects of a pre-deposition heating system on the interfacial temperature and interlayer bonding strength for fused filament fabrication [2023]

  • Mundada, Piyush Suresh, Yang, Che-Hao, and Chen, Roland K.
  • Rapid Prototyping Journal, 2022, Vol. 29, Issue 1, pp. 9-18.

30. Assessment and treatment of pectus deformities: a review of reverse engineering and 3D printing techniques [2023]

  • Mussi, Elisa, Servi, Michaela, Facchini, Flavio, Furferi, Rocco, and Volpe, Yary
  • Rapid Prototyping Journal, 2022, Vol. 29, Issue 1, pp. 19-32.

31. Overcoming the post-processing barriers for 3D-printed medical models [2023]

  • Verma, Virendra Kumar, Kamble, Sachin S., Ganapathy, L., and Tarei, Pradeep Kumar
  • Rapid Prototyping Journal, 2022, Vol. 29, Issue 1, pp. 33-49.

32. Additively manufactured foamed polylactic acid for lightweight structures [2023]

  • Yousefi Kanani, Armin, Rennie, Allan E.W., and Abd Rahim, Shayfull Zamree Bin
  • Rapid Prototyping Journal, 2022, Vol. 29, Issue 1, pp. 50-66.

33. Ti6Al4V scaffolds fabricated by laser powder bed fusion with hybrid volumetric energy density [2023]

  • Gaur, Bhanupratap, Soman, Deepak, Ghyar, Rupesh, and Bhallamudi, Ravi
  • Rapid Prototyping Journal, 2022, Vol. 29, Issue 1, pp. 67-79.

34. Offline laser power modulation in LPBF additive manufacturing including kinematic and technological constraints [2023]

  • Ettaieb, Kamel, Godineau, Kevin, Lavernhe, Sylvain, and Tournier, Christophe
  • Rapid Prototyping Journal, 2022, Vol. 29, Issue 1, pp. 80-91.

35. Effect of build parameters and strain rate on mechanical properties of 3D printed PLA using DIC and desirability function analysis [2023]

  • Ali, Shafahat, Abdallah, Said, Devjani, Deepak H., John, Joel S., Samad, Wael A., and Pervaiz, Salman
  • Rapid Prototyping Journal, 2022, Vol. 29, Issue 1, pp. 92-111.

36. Viability and development of multi-axis material extrusion products: a case study [2023]

  • Kaill, Nathaniel, Campbell, Robert, and Pradel, Patrick
  • Rapid Prototyping Journal, 2022, Vol. 29, Issue 1, pp. 112-117.

37. Effect of direct aging and annealing on the microstructure and mechanical properties of AlSi10Mg fabricated by selective laser melting [2023]

  • Xiao, Haifeng, Zhang, Changchun, and Zhu, Haihong
  • Rapid Prototyping Journal, 2022, Vol. 29, Issue 1, pp. 118-127.

38. An initial feasibility study into ray-based slicing for revolving thin-wall parts using a rotary 3D printer [2023]

  • Zhao, Donghua, Zhu, Gaohan, He, Jiapeng, and Guo, Weizhong
  • Rapid Prototyping Journal, 2022, Vol. 29, Issue 1, pp. 128-144.

39. The problem with printing pitch: challenges in designing 3D printed claves [2023]

  • Evans, Emmeline and McComb, Christopher
  • Rapid Prototyping Journal, 2022, Vol. 29, Issue 1, pp. 145-156.

40. Effects of 3D-printed PLA material with different filling densities on coefficient of friction performance [2023]

  • Şirin, Şenol, Aslan, Enes, and Akincioğlu, Gülşah
  • Rapid Prototyping Journal, 2022, Vol. 29, Issue 1, pp. 157-165.

41. Parametric optimization for dimensional correctness of 3D printed part using masked stereolithography: Taguchi method [2023]

  • Borra, N. Dhanunjayarao and Neigapula, Venkata Swamy Naidu
  • Rapid Prototyping Journal, 2022, Vol. 29, Issue 1, pp. 166-184.

42. A study on the effects of internal architecture on the mechanical properties and mixed-mode fracture behavior of 3D printed CaCO3/ABS nanocomposite samples [2023]

  • Seyedzavvar, Mirsadegh and Boğa, Cem
  • Rapid Prototyping Journal, 2022, Vol. 29, Issue 1, pp. 185-206.

43. Mass transport enhancement in direct formic acid fuel cell with a novel channel design [2023]

  • Jalowiecka, Monika, Bojarska, Zuzanna, Malolepszy, Artur, and Makowski, Lukasz
  • Chemical Engineering Journal. January 1, 2023, Vol. 451

44. 3D printed cranioplasty moulds and a 3D optical scanner: A novel approach to reconstruction of challenging post-traumatic defects [2023]

  • Wellham, Annabelle Margaret Lucy, Hurrell, Michael James Leslie, Collier, Ryan Christopher, Morrison, David Anthony, and Ricciardo, Peter Virgil
  • Journal of Oral and Maxillofacial Surgery, Medicine, and Pathology. January, 2023, Vol. 35 Issue 1, p67.

45. Fused Deposition Modeling of Polyolefins: Challenges and Opportunities [2023]

  • Verma, Nandishwar, Awasthi, Pratiksha, Gupta, Akash, and Banerjee, Shib Shankar
  • Macromolecular Materials and Engineering. January, 2023, Vol. 308 Issue 1, pn/a, 23 p.

46. Instructional Design for Socially Distanced Compliance Audit [2023]

  • Frazier-Aich, Lorraine, Beaudry, Justin, MacDonald, Madeleine, and Giacumo, Lisa A.
  • TechTrends: For Leaders in Education & Training. January, 2023, Vol. 67 Issue 1, p68, 16 p.

47. CovInnovations teaming with crowd funding heavyweight, StartEngine [2022]

  • Financial Services Monitor Worldwide. December 24, 2022

48. CovInnovations teaming with crowd funding heavyweight, StartEngine [2022]

  • PRWeb Newswire. December 23, 2022

49. Geometrical analysis in material extrusion process with polylactic acid (PLA)+carbon fiber [2022]

  • Bermudo Gamboa, Carolina, Martín Béjar, Sergio, Trujillo Vilches, Francisco Javier, and Sevilla Hurtado, Lorenzo
  • Rapid Prototyping Journal, 2022, Vol. 29, Issue 11, pp. 21-39.

50. Multimaterial powder bed fusion techniques [2022]

  • Mehrpouya, Mehrshad, Tuma, Daniel, Vaneker, Tom, Afrasiabi, Mohamadreza, Bambach, Markus, and Gibson, Ian
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 11, pp. 1-19.

Catalog

Books, media, physical & digital resources
See catalog results

Guides

Course- and topic-based guides to collections, tools, and services.
Search ""Prototyping"" in all guide pages