articles+ search results

3,955 articles+ results

1 - 100
View results as:
Number of results to display per page

1. GENESIS ROBOTICS & MOTION TECHNOLOGIES EXPANDS PRODUCTION CAPACITY AND ENHANCES ENGINEERING & PROTOTYPING CAPABILITIES TO MEET PROJECTED DEMAND FOR DIRECT DRIVE MOTORS AND ACTUATORS [2022]

  • PR Newswire. May 12, 2022

2. Systems Definition, Inc. Awarded AFWERX Small Business Innovation Research Direct to Phase II Contract to Address Enhanced First Responder Personnel Accountability Capabilities [2022]

  • PR Newswire. May 10, 2022

3. Effects of the process parameters on the formability and properties of Ni54(at.%) Ti alloys prepared by laser powder bed fusion [2022]

  • Jianran Lv, Hongyao Shen, and Jianzhong Fu
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 6, pp. 1193-1205.

4. Correlating structural complexity and acoustic noise performance of electric motors [2022]

  • Issah Ibrahim, Mohammad Hossain Mohammadi, Vahid Ghorbanian, and David Lowther
  • COMPEL -The international journal for computation and mathematics in electrical and electronic engineering, 2022, Vol. 41, Issue 3, pp. 925-937.

5. CannaVault[TM] Systems Inc. 'Harvest Max' in prototyping stage [2022]

  • Marketwired. March 28, 2022

6. Aerospace 3D Printing Market to Reach $6.80 Billion, Globally, by 2030 at 18.4% CAGR: Allied Market Research [2022]

  • PR Newswire. March 23, 2022

7. Leadership development through experimentation: a theoretical framework and empirical test [2022]

  • Julian Birkinshaw and Maya Gudka
  • Journal of Management Development, 2022, Vol. 41, Issue 2, pp. 70-93.

8. SYBRIDGE TECHNOLOGIES ACQUIRES ADVANTAGE ENGINEERING INC [2022]

  • PR Newswire. March 21, 2022

9. Multimaterial powder bed fusion techniques [2022]

  • Mehrshad Mehrpouya, Daniel Tuma, Tom Vaneker, Mohamadreza Afrasiabi, Markus Bambach, and Ian Gibson
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 11, pp. 1-19.

10. Product Prototyping Market to Expand Owing to Rising Need for Minimizing Manufacturing Costs, States TMR Report [2022]

  • PR Newswire. March 14, 2022

11. FLEX LOGIX AND THE AIR FORCE RESEARCH LABORATORY EXPAND THEIR LICENSE TO INCLUDE ANY FLEX LOGIX TECHNOLOGY FOR RESEARCH AND CHIP PROTOTYPING IN ALL AVAILABLE PROCESSES INCLUDING RADHARD [2022]

  • PR Newswire. March 7, 2022

12. SparkFun Electronics Partners with MikroElektronika to Expand Rapid Prototyping Offerings [2022]

  • PR Newswire. March 4, 2022

13. Boeing is Building Wideband Global SATCOM (WGS)-11+ Satellite Using Advanced Techniques to Deliver Unrivaled Capability at 'Record-Breaking Speed' [2022]

  • PR Newswire. March 1, 2022

14. Optimisation of single contour strategy in selective laser melting of Ti-6Al-4V lattices [2022]

  • Xue Cao, Luke Nelson Carter, Victor Manuel Villapún, Francesco Cantaboni, Giulia De Sio, Morgan Lowther, Sophie Elizabeth Thompson Louth, Liam Grover, Paola Ginestra, and Sophie Constance Cox
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 5, pp. 907-915.

15. Effects of various processing parameters on the mechanical properties and dimensional accuracies of Prosopis chilensis/PES composites produced by SLS [2022]

  • Jian Li, Aboubaker Idriss Bolad, Yanling Guo, Yangwei Wang, Elkhawad Ali Elfaki, Shareef Aldoom Abdallah Adam, and Gafer Abd Alhamid Mohammad Ahmed
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 6, pp. 1144-1167.

16. Rapid Prototyping Material Market size worth $ 2282.8 Million, Globally, by 2028 at 28.50% CAGR: Verified Market Research [2022]

  • PR Newswire. February 14, 2022

17. BIS Research Study Highlights the Electric Vehicle Virtual Prototyping Market to Reach $5.6 billion by 2030 [2022]

  • PR Newswire. February 9, 2022

18. Fatigue life optimization for 17-4Ph steel produced by selective laser melting [2022]

  • Jean-marc Linares, Julien Chaves-Jacob, Quentin Lopez, and Jean-Michel Sprauel
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 6, pp. 1182-1192.

19. CoolIT Systems State-of-the-Art Innovation Lab Officially Opens Its Doors [2022]

  • PR Newswire. February 4, 2022

20. Electrothermal response optimization of nozzle structure for multi-material rapid prototyping based on fuzzy adaptive control [2022]

  • Jinghua Xu, Kunqian Liu, Zhi Liu, Fuqiang Zhang, Shuyou Zhang, and Jianrong Tan
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 6, pp. 1168-1181.

21. A case study on a flexible floor plan design for South Korean apartments using two types of margins [2022]

  • Chaeshin Yoon, Marie Kim, Jinho Park, and Jeayoung Lee
  • Open House International, 2022, Vol. 47, Issue 2, pp. 207-217.

22. Proposal of design rules for improving the accuracy of selective laser melting (SLM) manufacturing using benchmarks parts [2022]

  • Sara Giganto, Susana Martínez-Pellitero, Eduardo Cuesta, Pablo Zapico, and Joaquín Barreiro
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 6, pp. 1129-1143.

23. Global Engineering Services Outsourcing Market Report 2021-2026: Testing to Account for $791.2 Billion with Prototyping to Account for $379 Billion [2022]

  • PR Newswire. January 28, 2022

24. Densification behaviour of pure copper processed through cold pressing and binder jetting under different atmospheres [2022]

  • Tobia Romano, Emanuele Migliori, Marco Mariani, Nora Lecis, and Maurizio Vedani
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 6, pp. 1023-1039.

25. Onyx Asset Advisors, Integra Asset Solutions, and Rabin Worldwide Acquire the Assets of Plethora Corporation for Online Auction of State-of-the-Art, High-Precision CNC Machining & Rapid Prototyping Equipment in Marietta, GA [2022]

  • PR Newswire. January 24, 2022

26. Fused filament fabrication of nylon 6/66 copolymer: parametric study comparing full factorial and Taguchi design of experiments [2022]

  • Kaifur Rashed, Abdullah Kafi, Ranya Simons, and Stuart Bateman
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 6, pp. 1111-1128.

27. A bibliometric analysis of research in design for additive manufacturing [2022]

  • Martins Ugonna Obi, Patrick Pradel, Matt Sinclair, and Richard Bibb
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 5, pp. 967-987.

28. Validation of design and materials for additive manufacturing of endocavitary mechanical distractor [2022]

  • Jose Manuel Sierra, Maria del Rocio Fernandez, Jose Ignacio Ignacio Rodriguez Garcia, Jose Luis Cortizo, and Marta María Villazon
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 6, pp. 1005-1012.

29. Global EV Virtual Prototyping Industry Worth $5.6 Billion by 2030 - Discover the Key Trends, Drivers, Challenges, Segments, and Competitors [2022]

  • PR Newswire. January 12, 2022

30. Development and experimental study of an automated laser-foil-printing additive manufacturing system [2022]

  • Chia-Hung Hung, Tunay Turk, M. Hossein Sehhat, and Ming C. Leu
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 6, pp. 1013-1022.

31. Feedforward control to suppress the leading edge bulge in photopolymerization-based additive manufacturing [2022]

  • Andrey Kozhevnikov, Rudie P.J. Kunnen, Gregor E. van Baars, and Herman J.H. Clercx
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 6, pp. 1040-1059.

32. On the build orientation effect in as-printed and as-sintered bending properties of 17-4PH alloy fabricated by metal fused filament fabrication [2022]

  • Chanun Suwanpreecha and Anchalee Manonukul
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 6, pp. 1076-1085.

33. Overlapping optimization of hybrid deposited and micro-rolling additive manufacturing [2022]

  • Xushan Zhao, Yuanxun Wang, Haiou Zhang, Runsheng Li, Xi Chen, and Youheng Fu
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 6, pp. 1086-1096.

34. Transient thermal finite-element analysis of fused filament fabrication process [2022]

  • Chitralekha Nahar and Pavan Kumar Gurrala
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 6, pp. 1097-1110.

35. A physical investigation of dimensional and mechanical characteristics of 3D printed nut and bolt for industrial applications [2022]

  • Ramesh Chand, Vishal S. Sharma, Rajeev Trehan, and Munish Kumar Gupta
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 5, pp. 953-966.

36. Study of anisotropy through microscopy, internal friction and electrical resistivity measurements of Ti-6Al-4V samples fabricated by selective laser melting [2022]

  • Adelaide Nespoli, Nicola Bennato, Elena Villa, and Francesca Passaretti
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 6, pp. 1060-1075.

37. Reliable 3D Printer [2022]

  • New Equipment Digest. January, 2022, Vol. 87 Issue 1, p11, 1 p.

38. Fatigue life assessment of polyamide 12 processed by selective laser sintering. Damage modelling according to fracture mechanics [2021]

  • Alicia Salazar, Alberto Jesús Cano Aragón, and Jesús Rodríguez
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 5, pp. 814-823.

39. Multi-jet ice 3D printing [2021]

  • Pushkar Prakash Kamble, Subodh Chavan, Rajendra Hodgir, Gopal Gote, and K.P. Karunakaran
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 6, pp. 989-1004.

40. The role of robotics in additive manufacturing: review of the AM processes and introduction of an intelligent system [2021]

  • J. Norberto Pires, Amin S. Azar, Filipe Nogueira, Carlos Ye Zhu, Ricardo Branco, and Trayana Tankova
  • Industrial Robot: the international journal of robotics research and application, 2021, Vol. 49, Issue 2, pp. 311-331.

41. Two improved scanning path planning algorithms and a 3D printing control system with circular motion controller [2021]

  • Dier Wang and Jun Zhang
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 4, pp. 695-703.

42. X-Rite Helps Brands and Suppliers Implement Pantone Color of the Year 2022 as a Digital Standard [2021]

  • PR Newswire. December 16, 2021

43. Impact of cutting fluid on hybrid manufacturing of AISI H13 tool steel [2021]

  • Magdalena Cortina, Jon Iñaki Arrizubieta, Aitzol Lamikiz, and Eneko Ukar
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 5, pp. 933-944.

44. Erosion characteristics on surface texture of additively manufactured AlSi10Mg alloy in SiO2 quartz added slurry environment [2021]

  • Recep Demirsöz, Mehmet Erdi Korkmaz, Munish Kumar Gupta, Alberto Garcia Collado, and Grzegorz M. Krolczyk
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 5, pp. 916-932.

45. Development of a patient-specific immobilisation facemask for radiation therapy using additive manufacturing, pressure sensors and topology optimisation [2021]

  • Amirhossein Asfia, James I. Novak, Bernard Rolfe, and Tomas Kron
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 5, pp. 945-952.

46. Fused filament fabrication of continuous optic fiber reinforced polylactic acid composites [2021]

  • Rui Yan, Yuye Wang, Pengjun Luo, Yangbo Li, and Xiaochun Lu
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 4, pp. 766-776.

47. Processing and properties of PLA/Mg filaments for 3D printing of scaffolds for biomedical applications [2021]

  • Cristina Pascual-González, Cillian Thompson, Jimena de la Vega, Nicolás Biurrun Churruca, Juan P. Fernández-Blázquez, Iker Lizarralde, Diego Herráez-Molinero, Carlos González, and Javier LLorca
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 5, pp. 884-894.

48. TriMech Acquires InterPRO Additive Manufacturing Group [2021]

  • PR Newswire. December 2, 2021

49. Hawk Ridge Systems Partners with Caztek Inc. for Engineering, Prototyping and Design Services [2021]

  • PR Newswire. December 1, 2021

50. Aerospace 3D Printing Market worth $4.7 billion by 2026 - Exclusive Report by MarketsandMarkets(TM) [2021]

  • PR Newswire. November 30, 2021

51. Numerical modeling and experimental verification of the composite material of PA12/HA with parameterized random distribution in selective laser sintering [2021]

  • Junchao Li, Yanan Yang, Ze Zhao, and Ran Yan
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 5, pp. 873-883.

52. Multi-physics properties of thermoplastic polyurethane at various fused filament fabrication parameters [2021]

  • Samir Kasmi, Geoffrey Ginoux, Eric Labbé, and Sébastien Alix
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 5, pp. 895-906.

53. Slicing strategy and process of laser direct metal deposition (DMD) of the inclined thin-walled part under open-loop control [2021]

  • Liaoyuan Chen, Tianbiao Yu, Ying Chen, and Wanshan Wang
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 1, pp. 68-86.

54. Data fusion analysis in the powder-bed fusion AM process monitoring by Dempster-Shafer evidence theory [2021]

  • Yingjie Zhang, Wentao Yan, Geok Soon Hong, Jerry Fuh Hsi Fuh, Di Wang, Xin Lin, and Dongsen Ye
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 5, pp. 841-854.

55. Investigations of personalized and sustainable approach of oral drug delivery systems through additive manufacturing [2021]

  • R. Durga Prasad Reddy, Haytham Elgazzar, and Varun Sharma
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 5, pp. 855-872.

56. 3MF Consortium Announces Volumetric Design Support, Grows Adoption of 3D Printing Specification [2021]

  • PR Newswire. November 17, 2021

57. Ni-based alloy 713C manufactured by a selective laser melting method: characteristics of the microstructure [2021]

  • Monika, Iwona, Alexander, Bogusława, Magdalena, Dorota, Jarosław, Duchna, Cieślik, Kloshek, Adamczyk-Cieślak, Zieniuk, Moszczyńska, and Mizera
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 4, pp. 777-788.

58. Simultaneous extraction of profile and surface roughness of 3D SLM components using fringe projection method [2021]

  • Terry Yuan-Fang Chen, Yu-Lung Lo, Ze-Hong Lin, and Jui-Yu Lin
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 4, pp. 789-801.

59. Animal orthosis fabrication with additive manufacturing – a case study of custom orthosis for chicken [2021]

  • Wiktoria Maria Wojnarowska, Jakub Najowicz, Tomasz Piecuch, Michał Sochacki, Dawid Pijanka, Jolanta Trybulec, and Sławomir Miechowicz
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 5, pp. 824-832.

60. Correlation between pre- and post-treatments of additively manufactured 316L parts and the resulting low cycle fatigue behavior [2021]

  • Kai-Uwe Garthe, Kay-Peter Hoyer, Leif Hagen, Wolfgang Tillmann, and Mirko Schaper
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 5, pp. 833-840.

61. Use of 4D-printing and shape memory alloys to fabricate customized metal jewels with functional properties [2021]

  • Adelaide Nespoli, Nicola Bennato, Enrico Bassani, and Francesca Passaretti
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 5, pp. 805-813.

62. Corigine Brings Prototyping And Emulation Acceleration To The Desktop With MimicTurbo GT Card [2021]

  • PR Newswire. November 7, 2021

63. AiRANACULUS Awarded Intelligence Agency Contract For Enhanced Communications Security [2021]

  • PR Newswire. November 4, 2021

64. Volumetric adaptive slicing of manifold mesh for rapid prototyping based on relative volume error [2021]

  • QianyongChen, JinghuaXu, and ShuyouZhang
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 3, pp. 606-626.

65. Silanna Semiconductor's GaN-Based, ACF Reference Design Sets New Benchmark for 65W 1C Fast Charger Power Density, Efficiency and No-Load Power [2021]

  • PR Newswire. November 3, 2021

66. The mechanism of process parameters influencing the AlSi10Mg side surface quality fabricated via laser powder bed fusion [2021]

  • Shimin Dai, Hailong Liao, Haihong Zhu, and Xiaoyan Zeng
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 3, pp. 514-524.

67. Predicting the effect of build orientation and process temperatures on the performance of parts made by fused filament fabrication [2021]

  • Fernando Moura Duarte, José António Covas, and Sidonie Fernandes da Costa
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 4, pp. 704-715.

68. Preparation and application of water-based nano-silver conductive ink in paper-based 3D printing [2021]

  • Chenfei Zhao, Jun Wang, and Lini Lu
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 4, pp. 747-755.

69. Microstructure and mechanical properties of hierarchical porous parts of Ti-6Al-4V alloy obtained by powder bed fusion techniques [2021]

  • Edwin Sallica-Leva, Fernando Henrique da Costa, Cláudio Teodoro Dos Santos, André Luiz Jardini, Jorge Vicente Lopes da Silva, and João Batista Fogagnolo
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 4, pp. 732-746.

70. S2C Delivers VU19P FPGA-based Logic Matrix LX2 - a New Benchmark in High-performance & High-density Prototyping [2021]

  • PR Newswire. October 28, 2021

71. Design and development of 3D printing assisted microwave sintering of elbow implant with biomechanical properties similar tohuman elbow [2021]

  • Dilpreet Singh, Bhavuk Garg, Pulak Mohan Pandey, and Dinesh Kalyanasundaram
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 2, pp. 390-403.

72. On the design and manufacturing of topologically optimized wings [2021]

  • Tiago Proença, Frederico Afonso, Fernando Lau, Hugo Policarpo, and João Lourenço
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 4, pp. 637-646.

73. Additive manufacturing is sustainable technology: citespace based bibliometric investigations of fused deposition modeling approach [2021]

  • Yanen Wang, Ray Tahir Mushtaq, Ammar Ahmed, Ammar Ahmed, Mudassar Rehman, MudassarRehman, Aqib Mashood Khan, Shubham Sharma, Dr Kashif Ishfaq, Haider Ali, and Thierno Gueye
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 4, pp. 654-675.

74. Manufacturing process-driven structured materials (MPDSMs): design and fabrication for extrusion-based additive manufacturing [2021]

  • Albert E. Patterson, Charul Chadha, and Iwona M. Jasiuk
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 4, pp. 716-731.

75. A study on the relationship between spectral characterization and composition of plasma in laser additive manufacturing of gradient materials [2021]

  • Bo Chen, Zheng Meng, Kai Yang, Yongzhen Yao, Caiwang Tan, and Xiaoguo Song
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 4, pp. 756-765.

76. Hydroxyapatite composite scaffold for bone regeneration via rapid prototyping technique: a review [2021]

  • Fangfang Sun, Tianze Wang, and Yong Yang
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 3, pp. 585-605.

77. Perspectives on the evolution of a fabrication laboratory in an emerging country: a comparative lexicometric study of European FabLabs [2021]

  • Helmi Ben Rejeb and Benoit Roussel
  • Journal of Manufacturing Technology Management, 2021, Vol. 33, Issue 2, pp. 399-422.

78. eInfochips launches Smart Camera Reference Design based on the Qualcomm Vision Intelligence Platform using the Qualcomm QCS610 and Qualcomm QCS410 processors [2021]

  • PR Newswire. October 21, 2021

79. Coupling additive manufacturing and low-temperature sintering: a fast processing route of silicate glassy matrix [2021]

  • Danna Tang, Yushen Wang, Zheng Li, Yan Li, and Liang Hao
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 4, pp. 676-685.

80. Mechanical properties and crystallinity of polypropylene injection molded in polyjet and aluminum tooling [2021]

  • Gabriel Antonio Mendible, Nabil Saleh, Carol Barry, and Stephen P. Johnston
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 4, pp. 686-694.

81. Temperature-compensated constitutive model of fused filament fabrication 3D printed PLA materials with full extrusion temperatures [2021]

  • Kaiyang Zhu, Zichen Deng, Shi Dai, and Yajun Yu
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 1, pp. 41-51.

82. An optimisation framework for designs for additive manufacturing combining design, manufacturing and post-processing [2021]

  • Anton Wiberg, Johan Persson, and Johan Ölvander
  • Rapid Prototyping Journal, 2021, Vol. 27, Issue 11, pp. 90-105.

83. Global Engineering Services Outsourcing Market Report 2021-2028: An Evolving Market with Advances in Sensing, Connected Computing, Artificial Intelligence (AI), and Internet of Things (IoT) [2021]

  • PR Newswire. October 12, 2021

84. Experimental verification of computational and sensitivity analysis on substrate deformation and plastic strain induced by hollow thin-walled WAAM structure [2021]

  • Keval P. Prajadhiana, Yupiter H.P. Manurung, Alexander Bauer, Mohd Shahriman Adenan, Nur Izan Syahriah, Mohamed Ackiel Mohamed, Birgit Awiszus, Marcel Graf, and Andre Haelsig
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 3, pp. 559-572.

85. The microstructure and mechanical properties of Co/YCF102 composite coating [2021]

  • Wenchao Xi, Boxue Song, Jinlong Dong, Tianqi Zhang, Tianbiao Yu, and Jun Wang
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 4, pp. 647-653.

86. Curved layer path planning on a 5-axis 3D printer [2021]

  • Joao Duarte, Isabel Espírito Santo, M. Teresa T. Monteiro, and A. Ismael F. Vaz
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 4, pp. 629-636.

87. Reducing Time & Cost to Market for Medical Devices, Upcoming Webinar Hosted by Xtalks [2021]

  • PR Newswire. October 5, 2021

88. Additive manufacturing of anti-SARS-CoV-2 Copper-Tungsten-Silver alloy [2021]

  • John Robinson, Arun Arjunan, Ahmad Baroutaji, Miguel Martí, Alberto Tuñón Molina, Ángel Serrano-Aroca, and Andrew Pollard
  • Rapid Prototyping Journal, 2021, Vol. 27, Issue 10, pp. 1831-1849.

89. An in-process multi-feature data fusion nondestructive testing approach for wire arc additive manufacturing [2021]

  • Xi Chen, Youheng Fu, Fanrong Kong, Runsheng Li, Yu Xiao, Jiannan Hu, and Haiou Zhang
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 3, pp. 573-584.

90. Imperial Mining and Eck Industries Move to Prototyping a Scandium-Aluminum Battery Box for a Global Automotive Manufacturer [2021]

  • Marketwired. September 28, 2021

91. Meeting Market’s Expectations: The Importance of Early Prototyping and Validation [2021]

  • Nicholas H. Kirk and Lamberto Zollo
  • European Venture Toolbox: The Path for SMEs to Grasp and Defend Opportunities

92. Opportunities and challenges in additive manufacturing used in space sector:a comprehensive review [2021]

  • Kashif Ishfaq, Muhammad Asad, Muhammad Arif Mahmood, Mirza Abdullah, and Catalin Iulian Pruncu
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 2, pp. 253-267.

93. A review of the accuracy of thermoplastic polymeric parts fabricated by additive manufacturing [2021]

  • Michele Ciotti, Giampaolo Campana, and Mattia Mele
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 2, pp. 358-389.

94. Effect of process parameters on stress and strain of hybrid deposition and micro-rolling [2021]

  • Xushan Zhao, Yuanxun Wang, Guilan Wang, Runsheng Li, and Haiou Zhang
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 3, pp. 490-504.

95. A review on the performance characteristics, applications, challenges and possible solutions in electron beam melted Ti-based orthopaedic and orthodontic implants [2021]

  • Kashif Ishfaq, Mudassar Rehman, Ahmed Raza Khan, and Yanen Wang
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 3, pp. 525-545.

96. A multi-criteria decision making method for vapor smoothening fused deposition modelling part [2021]

  • Sugavaneswaran M., Prashanthi B., and John Rajan A.
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 2, pp. 236-252.

97. Effect of internal pores on tensile properties of Co-Cr-Mo alloy fabricated by selective laser melting [2021]

  • Hyeon-Tae Im, Hyun-Su Kang, Hyeon-Goo Kang, Hyo Kyu Kim, Jun Choi, Ki Beom Park, Taeg Woo Lee, Chan Bin Mo, and Hyung-Ki Park
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 2, pp. 404-408.

98. Development of a deposition framework for implementation of a region-based adaptive slicing strategy in arc-based metal additive manufacturing [2021]

  • Nitish P. Gokhale and Prateek Kala
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 3, pp. 466-478.

99. Novel process for suppressing orange peel formation in polymer laser sintering through pretreatment with low-power laser irradiation [2021]

  • Ryuichi Kobayashi, Takashi Kigure, and Ming Yang
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 3, pp. 505-513.

100. Titanium fabricated by selective laser melting: microstructure, wear and corrosion behavior in different orientations [2021]

  • Yabao Hu, Hanning Chen, Xiaodan Liang, and Jianbo Lei
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 3, pp. 546-558.

Catalog

Books, media, physical & digital resources
See catalog results

Guides

Course- and topic-based guides to collections, tools, and services.
Search ""Prototyping"" in all guide pages