articles+ search results

2,138 articles+ results

1 - 100
View results as:
Number of results to display per page

1. Prototyping: A Key to Managing Product Development [1992]

  • Droz, Dan
  • Journal of Business Strategy, 1992, Vol. 13, Issue 3, pp. 34-38.

2. Development of a Person Specification System for Managerial Jobs [1994]

  • Wilkinson, Lartyg and van Zwanenberg, Nigel
  • Personnel Review, 1994, Vol. 23, Issue 1, pp. 25-36.

3. Implementing Simultaneous Engineering [1994]

  • Lee‐Mortimer, A.
  • World Class Design to Manufacture, 1994, Vol. 1, Issue 1, pp. 43-47.

4. Rapid prototyping—the ultimate in automation? [1994]

  • Dickens, P M
  • Assembly Automation, 1994, Vol. 14, Issue 2, pp. 10-13.

5. Rapid prototyping using the selective sintering process [1994]

  • Juster, Neal P.
  • Assembly Automation, 1994, Vol. 14, Issue 2, pp. 14-17.

6. Cubital rapid prototyping shortens time‐to‐market [1994]

  • Smith, Richard
  • Assembly Automation, 1994, Vol. 14, Issue 2, pp. 29-31.

7. Parangon uses LOM technology to cut product development times [1994]

  • Kochan, Anna
  • Assembly Automation, 1994, Vol. 14, Issue 2, pp. 32-34.

8. Rapid Product Development in the USA, Europe and Japan [1994]

  • Waterman, Norman A. and Dickens, Philip
  • World Class Design to Manufacture, 1994, Vol. 1, Issue 3, pp. 27-36.

9. Are Prototypes Good for the Budget? [1994]

  • Plunkett, Tim
  • World Class Design to Manufacture, 1994, Vol. 1, Issue 4, pp. 21-23.

10. Rapid Prototyping – The Future [1994]

  • Wohlers, Terry
  • World Class Design to Manufacture, 1994, Vol. 1, Issue 6, pp. 33-38.

11. Future potential of rapid prototyping and manufacturing around the world [1995]

  • Wohlers, Terry
  • Rapid Prototyping Journal, 1995, Vol. 1, Issue 1, pp. 4-10.

12. Rapid prototyping: current technology and future potential [1995]

  • Hull, Charles, Feygin, Michael, Baron, Yehudah, Sanders, Roy, Sachs, Emanuel, Lightman, Allan, and Wohlers, Terry
  • Rapid Prototyping Journal, 1995, Vol. 1, Issue 1, pp. 11-19.

13. Fast, functional prototypes via multiphase jet solidification [1995]

  • Greulich, Michael, Greul, Matthias, and Pintat, Theo
  • Rapid Prototyping Journal, 1995, Vol. 1, Issue 1, pp. 20-25.

14. Direct selective laser sintering of metals [1995]

  • Agarwala, Mukesh, Bourell, David, Beaman, Joseph, Marcus, Harris, and Barlow, Joel
  • Rapid Prototyping Journal, 1995, Vol. 1, Issue 1, pp. 26-36.

15. Direct slicing of CAD models for rapid prototyping [1995]

  • Jamieson, Ron and Hacker, Herbert
  • Rapid Prototyping Journal, 1995, Vol. 1, Issue 2, pp. 4-12.

16. Numerical analysis of stereolithography processes using the finite element method [1995]

  • Bugeda, Gabriel, Cervera, Miguel, Lombera, Guillermo, and Onate, Eugenio
  • Rapid Prototyping Journal, 1995, Vol. 1, Issue 2, pp. 13-23.

17. Selective laser sintering of alumina with polymer binders [1995]

  • Subramanian, Kamatchi, Vail, Neal, Barlow, Joel, and Marcus, Harris
  • Rapid Prototyping Journal, 1995, Vol. 1, Issue 2, pp. 24-35.

18. Post‐processing of selective laser sintered metal parts [1995]

  • Agarwala, Mukesh, Bourell, David, Beaman, Joseph, Marcus, Harris, and Barlow, Joel
  • Rapid Prototyping Journal, 1995, Vol. 1, Issue 2, pp. 36-44.

19. In via recta celeriter (in the right way quickly) [1995]

  • Raynor, Martyn J.
  • World Class Design to Manufacture, 1995, Vol. 2, Issue 3, pp. 10-16.

20. An engineering designer′s view of virtual engineering and rapid prototyping [1995]

  • Medl, Tony
  • World Class Design to Manufacture, 1995, Vol. 2, Issue 3, pp. 41-44.

21. Recoating issues in stereolithography [1995]

  • Renap, K. and Kruth, J.P.
  • Rapid Prototyping Journal, 1995, Vol. 1, Issue 3, pp. 4-16.

22. Investigation into the influence of material and process on part distortion [1995]

  • Wiedemann, B., Dusel, K.‐H., and Eschl, J.
  • Rapid Prototyping Journal, 1995, Vol. 1, Issue 3, pp. 17-22.

23. Powder deposition in selective metal powder sintering [1995]

  • Van der Schueren, B. and Kruth, J.P.
  • Rapid Prototyping Journal, 1995, Vol. 1, Issue 3, pp. 23-31.

24. Rapid metal tooling [1995]

  • Klocke, F., Celiker, T., and Song, Y.‐A.
  • Rapid Prototyping Journal, 1995, Vol. 1, Issue 3, pp. 32-42.

25. Rapid developments in rapid prototyping [1995]

  • Kochan, Anna
  • Assembly Automation, 1995, Vol. 15, Issue 4, pp. 18-19.

26. The role of prototyping in a bottom‐up approach to systems development: the “ideal” [1995]

  • Oh, Denise
  • Campus-Wide Information Systems, 1995, Vol. 12, Issue 4, pp. 12-18.

27. Conversion of RP models to investment castings [1995]

  • Dickens, P.M., Stangroom, R., Greul, M., Holmer, B., Hon, K.K.B., Hovtun, R., Neumann, R., Noeken, S., and Wimpenny, D.
  • Rapid Prototyping Journal, 1995, Vol. 1, Issue 4, pp. 4-11.

28. Multi‐objective optimization of part‐ building orientation in stereolithography [1995]

  • Cheng, W., Fuh, J.Y.H., Nee, A.Y.C., Wong, Y.S., Loh, H.T., and Miyazawa, T.
  • Rapid Prototyping Journal, 1995, Vol. 1, Issue 4, pp. 12-23.

29. Layer position accuracy in powder‐based rapid prototyping [1995]

  • Lee, S.‐J.J., Sachs, E., and Cima, M.
  • Rapid Prototyping Journal, 1995, Vol. 1, Issue 4, pp. 24-37.

30. How rapid prototyping can assist in the development of new orthopaedic products ‐ a case study [1995]

  • Jamieson, R., Holmer, B., and Ashby, A.
  • Rapid Prototyping Journal, 1995, Vol. 1, Issue 4, pp. 38-41.

31. Rapid tooling [1995]

  • Jacobs, Paul
  • World Class Design to Manufacture, 1995, Vol. 2, Issue 6, pp. 42-50.

32. Prototyping for effective data management [1996]

  • Dikolli, Shane and Smith, Malcolm
  • Managerial Auditing Journal, 1996, Vol. 11, Issue 1, pp. 19-22.

33. Using rapid prototyping to produce electrical discharge machining electrodes [1996]

  • Arthur, Alan, Dickens, Phillip Michael, and Cobb, Richard Charles
  • Rapid Prototyping Journal, 1996, Vol. 2, Issue 1, pp. 4-12.

34. Importing and reshaping digitized data for use in rapid prototyping: a system for sculpting polygonal mesh surfaces [1996]

  • Alciatore, David G. and Wohlers, Terry T.
  • Rapid Prototyping Journal, 1996, Vol. 2, Issue 1, pp. 13-23.

35. Intelligent rapid prototyping with fused deposition modelling [1996]

  • Masood, Syed H.
  • Rapid Prototyping Journal, 1996, Vol. 2, Issue 1, pp. 24-33.

36. Rapid Mould: epoxy‐infiltrated, laser‐sintered inserts [1996]

  • Apelskog Killander, Lena
  • Rapid Prototyping Journal, 1996, Vol. 2, Issue 1, pp. 34-40.

37. Accuracy issues in CAD to RP translations [1996]

  • Fadel, Georges M. and Kirschman, Chuck
  • Rapid Prototyping Journal, 1996, Vol. 2, Issue 2, pp. 4-17.

38. Rapid prototyping from a computer scientist’s point of view [1996]

  • Dolenc, A. and Mäkelä, I.
  • Rapid Prototyping Journal, 1996, Vol. 2, Issue 2, pp. 18-25.

39. Conceptual framework for the thermal process modelling of fused deposition [1996]

  • Atif Yardimci, M. and Güçeri, Selçuk
  • Rapid Prototyping Journal, 1996, Vol. 2, Issue 2, pp. 26-31.

40. A discussion on the concept of a flexible rapid prototyping cell [1996]

  • Gibson, Ian
  • Rapid Prototyping Journal, 1996, Vol. 2, Issue 2, pp. 32-38.

41. Towards a water‐powered robot [1996]

  • Usher, Simon, Taylor, P.M., Wilkinson, A.J., Keiffer, J., and Taylor, G.E.
  • Industrial Robot: An International Journal, 1996, Vol. 23, Issue 4, pp. 19-23.

42. Leonardo – rapid renaissance [1996]

  • Kochan, Anna
  • Assembly Automation, 1996, Vol. 16, Issue 3, pp. 28-29.

43. A rapid mould‐making system: material properties and design considerations [1996]

  • Barlow, Joel W., Beaman, Joseph J., and Balasubramanian, Badrinarayan
  • Rapid Prototyping Journal, 1996, Vol. 2, Issue 3, pp. 4-15.

44. Viscosity analysis of photopolymer and glass‐fibre composites for rapid layered manufacturing [1996]

  • Zak, G., Chan, A.Y.F., Park, C.B., and Benhabib, B.
  • Rapid Prototyping Journal, 1996, Vol. 2, Issue 3, pp. 16-23.

45. A thermal model of polymer degradation during selective laser sintering of polymer coated ceramic powders [1996]

  • Vail, Neal K., Balasubramanian, Badrinarayan, Barlow, Joel W., and Marcus, Harris L.
  • Rapid Prototyping Journal, 1996, Vol. 2, Issue 3, pp. 24-40.

46. Computational methods for rapid prototyping of analytic solid models [1996]

  • Farouki, Rida T. and König, Thomas
  • Rapid Prototyping Journal, 1996, Vol. 2, Issue 3, pp. 41-48.

47. Robot machines rapid prototype [1996]

  • Vergeest, Joris S.M. and Tangelder, Johan W.H.
  • Industrial Robot: An International Journal, 1996, Vol. 23, Issue 5, pp. 17-20.

48. New slant in rapid prototyping [1996]

  • Kochan, Anna
  • Assembly Automation, 1996, Vol. 16, Issue 4, pp. 26-29.

49. Structural quality of parts processed by fused deposition [1996]

  • Agarwala, Mukesh K., Jamalabad, Vikram R., Langrana, Noshir A., Safari, Ahmad, Whalen, Philip J., and Danforth, Stephen C.
  • Rapid Prototyping Journal, 1996, Vol. 2, Issue 4, pp. 4-19.

50. Adaptive slicing using stepwise uniform refinement [1996]

  • Sabourin, Emmanuel, Houser, Scott A., and Helge Bøhn, Jan
  • Rapid Prototyping Journal, 1996, Vol. 2, Issue 4, pp. 20-26.

51. Predicting total build‐time and the resultant cure depth of the 3D stereolithography process [1996]

  • Chen, Calvin C. and Sullivan, Paul A.
  • Rapid Prototyping Journal, 1996, Vol. 2, Issue 4, pp. 27-40.

52. Integration of MRI and stereolithography to build medical models: a case study [1996]

  • Swann, S.
  • Rapid Prototyping Journal, 1996, Vol. 2, Issue 4, pp. 41-46.

53. The application of virtual prototyping in the development of complex aerospace products [1997]

  • Bennett, G.R.
  • Aircraft Engineering and Aerospace Technology, 1997, Vol. 69, Issue 1, pp. 19-25.

54. Managing World Wide Web publications [1997]

  • Foo, Schubert and Peng Lim, Ee
  • Information Management & Computer Security, 1997, Vol. 5, Issue 1, pp. 11-17.

55. Variable beam size SLS workstation and enhanced SLS model [1997]

  • Miller, David, Deckard, Carl, and Williams, John
  • Rapid Prototyping Journal, 1997, Vol. 3, Issue 1, pp. 4-11.

56. Rapid prototyping with sloping surfaces [1997]

  • Hope, R.L., Jacobs, P.A., and Roth, R.N.
  • Rapid Prototyping Journal, 1997, Vol. 3, Issue 1, pp. 12-19.

57. Reducing the surface deviation of stereolithography using in‐process techniques [1997]

  • Reeves, Philip E. and Cobb, Richard C.
  • Rapid Prototyping Journal, 1997, Vol. 3, Issue 1, pp. 20-31.

58. Integrating rapid prototyping into the engineering curriculum ‐ a case study [1997]

  • Helge Bøhn, Jan
  • Rapid Prototyping Journal, 1997, Vol. 3, Issue 1, pp. 32-37.

59. Accurate exterior, fast interior layered manufacturing [1997]

  • Sabourin, Emmanuel, Houser, Scott A., and Helge Bøhn, Jan
  • Rapid Prototyping Journal, 1997, Vol. 3, Issue 2, pp. 44-52.

60. Stereolithography for injection mould tooling [1997]

  • Rahmati, Sadegh and Dickens, Philip
  • Rapid Prototyping Journal, 1997, Vol. 3, Issue 2, pp. 53-60.

61. Stereolithography of ceramic suspensions [1997]

  • Allen Brady, G. and Halloran, John W.
  • Rapid Prototyping Journal, 1997, Vol. 3, Issue 2, pp. 61-65.

62. Selective area laser deposition of titanium oxide [1997]

  • Jakubenas, K.J., Lee, Y.L., Shaarawi, M.S., Marcus, H.L., and Sanchez, J.M.
  • Rapid Prototyping Journal, 1997, Vol. 3, Issue 2, pp. 66-70.

63. This title is not available for guests. Log in to see the title and access the article.

64. The Prototrak system [1997]

  • Atherton, Nigel
  • Aircraft Engineering and Aerospace Technology, 1997, Vol. 69, Issue 4, pp. 363-365.

65. Features 3D scanning systems for rapid prototyping [1997]

  • Clark, Jim
  • Assembly Automation, 1997, Vol. 17, Issue 3, pp. 206-210.

66. Features Schenck celebrates 25 years in the UK [1997]

  • Rooks, Brian
  • Assembly Automation, 1997, Vol. 17, Issue 3, pp. 211-214.

67. Features Rapid growth for rapid prototyping [1997]

  • Kochan, Anna
  • Assembly Automation, 1997, Vol. 17, Issue 3, pp. 215-217.

68. Features Rapid prototyping wins widespread acceptance [1997]

  • Kochan, Anna
  • Assembly Automation, 1997, Vol. 17, Issue 3, pp. 218-221.

69. Features Magna wins award for dashboard assembly [1997]

  • Kochan, Anna
  • Assembly Automation, 1997, Vol. 17, Issue 3, pp. 231-232.

70. Optimal orientation with variable slicing in stereolithography [1997]

  • Xu, F., Wong, Y.S., Loh, H.T., Fuh, J.Y.H., and Miyazawa, T.
  • Rapid Prototyping Journal, 1997, Vol. 3, Issue 3, pp. 76-88.

71. Adaptive slicing with sloping layer surfaces [1997]

  • Hope, R.L., Roth, R.N., and Jacobs, P.A.
  • Rapid Prototyping Journal, 1997, Vol. 3, Issue 3, pp. 89-98.

72. Technology forecast on ink‐jet head technology applications in rapid prototyping [1997]

  • Carrión, Alejandro
  • Rapid Prototyping Journal, 1997, Vol. 3, Issue 3, pp. 99-115.

73. Rapid prototyping in Singapore: 1988 to 1997 [1997]

  • Chee Kai, Chua and Kah Fai, Leong
  • Rapid Prototyping Journal, 1997, Vol. 3, Issue 3, pp. 116-119.

74. Rapid prototyping and manufacturing in the USA [1997]

  • Anderson, Carol
  • Rapid Prototyping Journal, 1997, Vol. 3, Issue 3, pp. 120-121.

75. The bra design process ‐ a study of professional practice [1997]

  • Hardaker, C.H.M. and Fozzard, G.J.W.
  • International Journal of Clothing Science and Technology, 1997, Vol. 9, Issue 4, pp. 311-325.

76. Hexapods to take over? [1997]

  • Hollingum, Jack
  • Industrial Robot: An International Journal, 1997, Vol. 24, Issue 6, pp. 428-431.

77. Material properties and fabrication parameters in selective laser sintering process [1997]

  • Gibson, Ian and Shi, Dongping
  • Rapid Prototyping Journal, 1997, Vol. 3, Issue 4, pp. 129-136.

78. Controlled laser forming for rapid prototyping [1997]

  • Thomson, Gareth and Pridham, Mark S.
  • Rapid Prototyping Journal, 1997, Vol. 3, Issue 4, pp. 137-143.

79. A comparison between zero and first order approximation algorithms for layered manufacturing [1997]

  • de Jager, P.J., Broek, J.J., and Vergeest, J.S.M.
  • Rapid Prototyping Journal, 1997, Vol. 3, Issue 4, pp. 144-149.

80. Rapid prototyping trends [1997]

  • Kochan, Anna
  • Rapid Prototyping Journal, 1997, Vol. 3, Issue 4, pp. 150-152.

81. Windows‐based simulation software as an aid to learning [1998]

  • Lehaney, Brian, Kogetsidis, Harry, Platt, Avril, and Clarke, Steve
  • Journal of European Industrial Training, 1998, Vol. 22, Issue 1, pp. 12-17.

82. A shorter product development time with digital mock‐up [1998]

  • Rooks, Brian
  • Assembly Automation, 1998, Vol. 18, Issue 1, pp. 34-38.

83. Computer‐aided build style decision support for stereolithography [1998]

  • McClurkin, Joel E. and Rosen, David W.
  • Rapid Prototyping Journal, 1998, Vol. 4, Issue 1, pp. 4-13.

84. Effects of processing conditions on short TLCP fiber reinforced FDM parts [1998]

  • Gray, Robert W., IV, Baird, Donald G., and Helge Bøhn, Jan
  • Rapid Prototyping Journal, 1998, Vol. 4, Issue 1, pp. 14-25.

85. Thermomechanical analysis of the laminated object manufacturing (LOM) process [1998]

  • Sonmez, Fazil O. and Hahn, H. Thomas
  • Rapid Prototyping Journal, 1998, Vol. 4, Issue 1, pp. 26-36.

86. Piezoelectric ceramics and composites via rapid prototyping techniques [1998]

  • Bandyopadhyay, A., Panda, R.K., McNulty, T.F., Mohammadi, F., Danforth, S.C., and Safari, A.
  • Rapid Prototyping Journal, 1998, Vol. 4, Issue 1, pp. 37-49.

87. Computer simulation of composite material performance saves four months on S‐92 Helibus program [1998]

  • Forster, Bill, Rogg, Chris, Martin, Randy, and Green, Steve
  • Aircraft Engineering and Aerospace Technology, 1998, Vol. 70, Issue 2, pp. 100-103.

88. Lowest drag ever on debris‐guarded temperature sensor using computational fluid dynamics [1998]

  • Trongard, Penny and Brown, Rob
  • Aircraft Engineering and Aerospace Technology, 1998, Vol. 70, Issue 2, pp. 110-112.

89. Towards the virtual garment: three‐dimensional computer environments for garment design [1998]

  • Hardaker, C.H.M. and Fozzard, G.J.W.
  • International Journal of Clothing Science and Technology, 1998, Vol. 10, Issue 2, pp. 114-127.

90. Best practice in reengineering: a successful example of the Porsche research and development center [1998]

  • Zinser, Stephan, Baumgärtner, Armin, and Walliser, Frank‐Steffen
  • Business Process Management Journal, 1998, Vol. 4, Issue 2, pp. 154-167.

91. Abrasive flow finishing of stereolithography prototypes [1998]

  • Williams, Robert E. and Melton, Vicki L.
  • Rapid Prototyping Journal, 1998, Vol. 4, Issue 2, pp. 56-67.

92. Motion compensation for five‐axis rapid prototyping system [1998]

  • Ng, Peow, Fang, Wei, Li, Bo, Zou, Jiguo, and Gong, Haiqing
  • Rapid Prototyping Journal, 1998, Vol. 4, Issue 2, pp. 68-76.

93. Direct rapid tooling: a review of current research [1998]

  • Karapatis, N.P., van Griethuysen, J.P.S., and Glardon, R.
  • Rapid Prototyping Journal, 1998, Vol. 4, Issue 2, pp. 77-89.

94. Advances in modeling the effects of selected parameters on the SLS process [1998]

  • Williams, John D. and Deckard, Carl R.
  • Rapid Prototyping Journal, 1998, Vol. 4, Issue 2, pp. 90-100.

95. Manufacturing and product development in the USA, in particular in the Los Angeles Basin and the strategic training and implementation of high manufacturing technology [1998]

  • Grote, Karl‐H., Walo, Michael L., and Miller, Jeffrey L.
  • Integrated Manufacturing Systems, 1998, Vol. 9, Issue 4, pp. 228-235.

96. Study on multifunctional rapid prototyping manufacturing system [1998]

  • Yan, Yongnian, Zhang, Renji, Lu, Qingping, and Du, Zhaohui
  • Integrated Manufacturing Systems, 1998, Vol. 9, Issue 4, pp. 236-241.

97. Stereolithography for the fabrication of ceramic three‐ dimensional parts [1998]

  • Hinczewski, C., Corbel, S., and Chartier, T.
  • Rapid Prototyping Journal, 1998, Vol. 4, Issue 3, pp. 104-111.

98. Direct laser freeform fabrication of high performance metal components [1998]

  • Das, Suman, Beama, Joseph J., Wohlert, Martin, and Bourell, David L.
  • Rapid Prototyping Journal, 1998, Vol. 4, Issue 3, pp. 112-117.

99. Local adaptive slicing [1998]

  • Tyberg, Justin and Helge Bøhn, Jan
  • Rapid Prototyping Journal, 1998, Vol. 4, Issue 3, pp. 118-127.

100. Online functional testing with rapid prototypes: a novel empirical similarity method [1998]

  • Cho, Uichung, Wood, Kristin L., and Crawford, Richard H.
  • Rapid Prototyping Journal, 1998, Vol. 4, Issue 3, pp. 128-138.

Catalog

Books, media, physical & digital resources
See catalog results

Guides

Course- and topic-based guides to collections, tools, and services.
Search ""Prototyping"" in all guide pages
1 - 100