articles+ search results

1,921 articles+ results

1 - 100
View results as:
Number of results to display per page

1. Design, additive manufacturing and component testing of pneumatic rotary vane actuators for lightweight robots [2022]

  • Gabriel Dämmer, Hartmut Bauer, Rüdiger Neumann, and Zoltan Major
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 11, pp. 20-32.

2. Prototyping an IoT-based system for monitoring building indoor environment [2022]

  • Na Zhou, Alice Chang-Richards, Kevin I-Kai Wang, and Kim Natasha Dirks
  • Journal of Engineering, Design and Technology, 2022, Vol. 20, Issue 4, pp. 965-992.

3. A review of Industry 4.0 and additive manufacturing synergy [2022]

  • Mahyar Khorasani, Jennifer Loy, Amir Hossein Ghasemi, Elmira Sharabian, Martin Leary, Hamed Mirafzal, Peter Cochrane, Bernard Rolfe, and Ian Gibson
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 8, pp. 1462-1475.

4. Effect of building orientations and heat treatments on AlSi10Mg alloy fabricated by selective laser melting: microstructure evolution, mechanical properties, fracture mechanism and corrosion behavior [2022]

  • Gürkan Tarakçı, Hamaid Mahmood Khan, Mustafa Safa Yılmaz, and Gökhan Özer
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 8, pp. 1609-1621.

5. Establishing a blockchain online travel agency with a human–computer interaction perspective [2022]

  • Kuo-Wei Su, Po-Chih Chiu, and Tzu-Hsiang Lin
  • Journal of Hospitality and Tourism Technology, 2022, Vol. 13, Issue 3, pp. 559-572.

6. Research on microstructure and mechanical properties of hybrid plasma arc and micro-rolling additive manufacturing of Inconel 718 superalloy [2022]

  • Qingyong Chen, Guilan Wang, Haiou Zhang, and Runsheng Li
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 8, pp. 1509-1519.

7. Effects of the process parameters on the formability and properties of Ni54(at.%) Ti alloys prepared by laser powder bed fusion [2022]

  • Jianran Lv, Hongyao Shen, and Jianzhong Fu
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 6, pp. 1193-1205.

8. Experimental assessment of thermal gradients and layout effects on the mechanical performance of components manufactured by fused deposition modeling [2022]

  • Ramiro Mantecón, Celia Rufo-Martín, Rodrigo Castellanos, and José Diaz-Alvarez
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 8, pp. 1598-1608.

9. 4D-textiles: development of bistable textile structures using rapid prototyping and the bionic approach [2022]

  • Ann-Malin Schmidt, David Schmelzeisen, and Thomas Gries
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 8, pp. 1589-1597.

10. Estimation of lift characteristics of a subscale fighter using low-cost experimental methods [2022]

  • Leonardo Murilo Nepomuceno, Roberto Gil Annes da Silva, Alejandro Sobron, Petter Krus, and David Lundström
  • Aircraft Engineering and Aerospace Technology, 2022, Vol. 94, Issue 8, pp. 1379-1389.

11. In-situ adaptive thermal simulation method for predicting and avoiding hotspots in material extrusion processes [2022]

  • Jorne Driezen and Axel S. Herrmann
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 8, pp. 1492-1508.

12. Correlating structural complexity and acoustic noise performance of electric motors [2022]

  • Issah Ibrahim, Mohammad Hossain Mohammadi, Vahid Ghorbanian, and David Lowther
  • COMPEL -The international journal for computation and mathematics in electrical and electronic engineering, 2022, Vol. 41, Issue 3, pp. 925-937.

13. Laser additive manufacturing of bulk and powder ceramic materials: mathematical modeling with experimental correlations [2022]

  • Muhammad Arif Mahmood, Andrei C. Popescu, Mihai Oane, Carmen Ristoscu, and Ion N. Mihailescu
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 8, pp. 1520-1529.

14. Study on the impact behavior of arch micro-strut (ARCH) lattice structure by selective laser melting (SLM) [2022]

  • Jun Yao, Ruochen Ding, Kailun Li, Baorui Du, Lu Zhao, and Yixiang Yuan
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 8, pp. 1541-1557.

15. Performance characterisation and printing parameter modelling of selective laser melting printed capillary wicks [2022]

  • Xu Meng, Shujie Tan, Liping Ding, Yicha Zhang, and Liheng Chen
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 8, pp. 1558-1572.

16. Physical, thermal and tensile behaviour of 3D printed kenaf/PLA to suggest its usability for ankle–foot orthosis – a preliminary study [2022]

  • Farah Syazwani Shahar, Mohamed Thariq Hameed Sultan, Syafiqah Nur Azrie Safri, Mohammad Jawaid, Abd. Rahim Abu Talib, Adi Azriff Basri, and Ain Umaira Md Shah
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 8, pp. 1573-1588.

17. Specific energy absorption during compression testing of ABS and FPU parts fabricated using LCD-SLA based 3D printer [2022]

  • Harshit K. Dave, Ravi Teja Karumuri, Ashish R. Prajapati, and Shilpesh R. Rajpurohit
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 8, pp. 1530-1540.

18. Leadership development through experimentation: a theoretical framework and empirical test [2022]

  • Julian Birkinshaw and Maya Gudka
  • Journal of Management Development, 2022, Vol. 41, Issue 2, pp. 70-93.

19. Multimaterial powder bed fusion techniques [2022]

  • Mehrshad Mehrpouya, Daniel Tuma, Tom Vaneker, Mohamadreza Afrasiabi, Markus Bambach, and Ian Gibson
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 11, pp. 1-19.

20. Open-source syringe extrusion head for shear-thinning materials 3D printing [2022]

  • José Luis Dávila, Bruna Maria Manzini, Marcos Akira d'Ávila, and Jorge Vicente Lopes da Silva
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 8, pp. 1452-1461.

21. Evaluation of polymeric 3D printed adhesively bonded joints: effect of joint morphology and mechanical interlocking [2022]

  • Andrea Spaggiari and Filippo Favali
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 8, pp. 1437-1451.

22. Computational design strategy to improve RF heating uniformity [2022]

  • Jared Allison, John Pearce, Joseph Beaman, and Carolyn Seepersad
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 8, pp. 1476-1491.

23. 6DOF nonlinear control loading system for a large transport aircraft simulator [2022]

  • Saeb Amir Ahmadi Chomachar and Ashok Kuppusamy
  • Aircraft Engineering and Aerospace Technology, 2022, Vol. 94, Issue 7, pp. 1047-1057.

24. Distribution and evolution of thermal stress in laser powder bed fusion: conduction mode versus keyhole mode [2022]

  • Changpeng Chen, Zhongxu Xiao, Gang Xue, Hailong Liao, and Haihong Zhu
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 7, pp. 1325-1345.

25. Systematic design of nonlinear ADRC for laser seeker system with FPGA-based rapid prototyping validation [2022]

  • Abdellah Ferdjali, Momir Stanković, Stojadin Manojlović, Rafal Madonski, Dimitrije Bujaković, and Abderraouf Djenadbia
  • Aircraft Engineering and Aerospace Technology, 2022, Vol. 94, Issue 7, pp. 1087-1099.

26. Optimisation of single contour strategy in selective laser melting of Ti-6Al-4V lattices [2022]

  • Xue Cao, Luke Nelson Carter, Victor Manuel Villapún, Francesco Cantaboni, Giulia De Sio, Morgan Lowther, Sophie Elizabeth Thompson Louth, Liam Grover, Paola Ginestra, and Sophie Constance Cox
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 5, pp. 907-915.

27. Development of novel customized pressure distribution surface for reduction of pressure ulcers using additive manufacturing technology [2022]

  • Sivasankar Arumugam and Rajesh Ranganathan
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 7, pp. 1407-1421.

28. Characterization of power demand and energy consumption for fused filament fabrication using CFR-PEEK [2022]

  • Kyudong Kim, Heena Noh, Kijung Park, Hyun Woo Jeon, and Sunghoon Lim
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 7, pp. 1394-1406.

29. Relative density prediction of additively manufactured Inconel 718: a study on genetic algorithm optimized neural network models [2022]

  • Cuiyuan Lu and Jing Shi
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 8, pp. 1425-1436.

30. Effects of various processing parameters on the mechanical properties and dimensional accuracies of Prosopis chilensis/PES composites produced by SLS [2022]

  • Jian Li, Aboubaker Idriss Bolad, Yanling Guo, Yangwei Wang, Elkhawad Ali Elfaki, Shareef Aldoom Abdallah Adam, and Gafer Abd Alhamid Mohammad Ahmed
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 6, pp. 1144-1167.

31. Effect of heparin drug loading on biodegradable polycaprolactone–iron pentacarbonyl powder blend stents fabricated by solvent cast 3D printing [2022]

  • Jasvinder Singh, Pulak Mohan Pandey, Tejinder Kaur, and Neetu Singh
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 7, pp. 1361-1373.

32. Accuracy of 3D printed dental casts for protective dental splints during general anesthesia [2022]

  • Kyeong-Mee Park, Jieun Cheong, Seoyul Kim, Wonse Park, and Kee-Deog Kim
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 7, pp. 1374-1381.

33. Optimization of FDM 3D printing parameters for high strength PEEK using the Taguchi method and experimental validation [2022]

  • Cho-Pei Jiang, Yung-Chang Cheng, Hong-Wei Lin, Yu-Lee Chang, Tim Pasang, and Shyh-Yuan Lee
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 7, pp. 1260-1271.

34. Surface modification of prototypes in fused deposition modelling using lapping process [2022]

  • Mohammad Vahid Ehteshamfar, Mohammad Sadegh Javadi, and Hamed Adibi
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 7, pp. 1382-1393.

35. A critical review of 3D printing and digital manufacturing in construction engineering [2022]

  • Md. Hazrat Ali, Gani Issayev, Essam Shehab, and Shoaib Sarfraz
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 7, pp. 1312-1324.

36. High-cycle fatigue properties of curved-surface AlSi10Mg parts fabricated by powder bed fusion additive manufacturing [2022]

  • Yue Zhou, El Mehdi Abbara, Dayue Jiang, Arad Azizi, Mark D. Poliks, and Fuda Ning
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 7, pp. 1346-1360.

37. Fatigue life optimization for 17-4Ph steel produced by selective laser melting [2022]

  • Jean-marc Linares, Julien Chaves-Jacob, Quentin Lopez, and Jean-Michel Sprauel
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 6, pp. 1182-1192.

38. Evolution of temperature and residual stress behavior in selective laser melting of 316L stainless steel across a cooling channel [2022]

  • Hamaid Mahmood Khan, Saad Waqar, and Ebubekir Koç
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 7, pp. 1272-1283.

39. Additive manufacturing with fibre-reinforcement – design guidelines and investigation into the influence of infill patterns [2022]

  • Janos Plocher, Jean-Baptiste Wioland, and Ajit Singh Panesar
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 7, pp. 1241-1259.

40. An experimental and numerical investigation on mechanical properties of 3D printed continuous glass tow preg-reinforced composites [2022]

  • Nastaran Mosleh, Soheil Dariushi, and Masoud Esfandeh
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 7, pp. 1284-1296.

41. Selection for additive manufacturing using hybrid MCDM technique considering sustainable concepts [2022]

  • Mukesh Chandra, Faisal Shahab, Vimal KEK, and Sonu Rajak
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 7, pp. 1297-1311.

42. Electrothermal response optimization of nozzle structure for multi-material rapid prototyping based on fuzzy adaptive control [2022]

  • Jinghua Xu, Kunqian Liu, Zhi Liu, Fuqiang Zhang, Shuyou Zhang, and Jianrong Tan
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 6, pp. 1168-1181.

43. This title is not available for guests. Log in to see the title and access the article.

44. A case study on a flexible floor plan design for South Korean apartments using two types of margins [2022]

  • Chaeshin Yoon, Marie Kim, Jinho Park, and Jeayoung Lee
  • Open House International, 2022, Vol. 47, Issue 2, pp. 207-217.

45. Proposal of design rules for improving the accuracy of selective laser melting (SLM) manufacturing using benchmarks parts [2022]

  • Sara Giganto, Susana Martínez-Pellitero, Eduardo Cuesta, Pablo Zapico, and Joaquín Barreiro
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 6, pp. 1129-1143.

46. Sustainable design guidelines for additive manufacturing applications [2022]

  • Rohit Agrawal
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 7, pp. 1221-1240.

47. Densification behaviour of pure copper processed through cold pressing and binder jetting under different atmospheres [2022]

  • Tobia Romano, Emanuele Migliori, Marco Mariani, Nora Lecis, and Maurizio Vedani
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 6, pp. 1023-1039.

48. Investigation of suitable material and adhesion promoter combinations for fused filament fabrication on flexible silicone build plates [2022]

  • Thomas Herzog, Georg Schnell, Carsten Tille, and Hermann Seitz
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 7, pp. 1209-1220.

49. Fused filament fabrication of nylon 6/66 copolymer: parametric study comparing full factorial and Taguchi design of experiments [2022]

  • Kaifur Rashed, Abdullah Kafi, Ranya Simons, and Stuart Bateman
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 6, pp. 1111-1128.

50. A bibliometric analysis of research in design for additive manufacturing [2022]

  • Martins Ugonna Obi, Patrick Pradel, Matt Sinclair, and Richard Bibb
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 5, pp. 967-987.

51. Validation of design and materials for additive manufacturing of endocavitary mechanical distractor [2022]

  • Jose Manuel Sierra, Maria del Rocio Fernandez, Jose Ignacio Ignacio Rodriguez Garcia, Jose Luis Cortizo, and Marta María Villazon
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 6, pp. 1005-1012.

52. Development and experimental study of an automated laser-foil-printing additive manufacturing system [2022]

  • Chia-Hung Hung, Tunay Turk, M. Hossein Sehhat, and Ming C. Leu
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 6, pp. 1013-1022.

53. Feedforward control to suppress the leading edge bulge in photopolymerization-based additive manufacturing [2022]

  • Andrey Kozhevnikov, Rudie P.J. Kunnen, Gregor E. van Baars, and Herman J.H. Clercx
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 6, pp. 1040-1059.

54. On the build orientation effect in as-printed and as-sintered bending properties of 17-4PH alloy fabricated by metal fused filament fabrication [2022]

  • Chanun Suwanpreecha and Anchalee Manonukul
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 6, pp. 1076-1085.

55. Overlapping optimization of hybrid deposited and micro-rolling additive manufacturing [2022]

  • Xushan Zhao, Yuanxun Wang, Haiou Zhang, Runsheng Li, Xi Chen, and Youheng Fu
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 6, pp. 1086-1096.

56. Transient thermal finite-element analysis of fused filament fabrication process [2022]

  • Chitralekha Nahar and Pavan Kumar Gurrala
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 6, pp. 1097-1110.

57. A physical investigation of dimensional and mechanical characteristics of 3D printed nut and bolt for industrial applications [2022]

  • Ramesh Chand, Vishal S. Sharma, Rajeev Trehan, and Munish Kumar Gupta
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 5, pp. 953-966.

58. Study of anisotropy through microscopy, internal friction and electrical resistivity measurements of Ti-6Al-4V samples fabricated by selective laser melting [2022]

  • Adelaide Nespoli, Nicola Bennato, Elena Villa, and Francesca Passaretti
  • Rapid Prototyping Journal, 2022, Vol. 28, Issue 6, pp. 1060-1075.

59. Fatigue life assessment of polyamide 12 processed by selective laser sintering. Damage modelling according to fracture mechanics [2021]

  • Alicia Salazar, Alberto Jesús Cano Aragón, and Jesús Rodríguez
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 5, pp. 814-823.

60. Multi-jet ice 3D printing [2021]

  • Pushkar Prakash Kamble, Subodh Chavan, Rajendra Hodgir, Gopal Gote, and K.P. Karunakaran
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 6, pp. 989-1004.

61. The role of robotics in additive manufacturing: review of the AM processes and introduction of an intelligent system [2021]

  • J. Norberto Pires, Amin S. Azar, Filipe Nogueira, Carlos Ye Zhu, Ricardo Branco, and Trayana Tankova
  • Industrial Robot: the international journal of robotics research and application, 2021, Vol. 49, Issue 2, pp. 311-331.

62. Two improved scanning path planning algorithms and a 3D printing control system with circular motion controller [2021]

  • Dier Wang and Jun Zhang
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 4, pp. 695-703.

63. Impact of cutting fluid on hybrid manufacturing of AISI H13 tool steel [2021]

  • Magdalena Cortina, Jon Iñaki Arrizubieta, Aitzol Lamikiz, and Eneko Ukar
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 5, pp. 933-944.

64. Erosion characteristics on surface texture of additively manufactured AlSi10Mg alloy in SiO2 quartz added slurry environment [2021]

  • Recep Demirsöz, Mehmet Erdi Korkmaz, Munish Kumar Gupta, Alberto Garcia Collado, and Grzegorz M. Krolczyk
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 5, pp. 916-932.

65. Development of a patient-specific immobilisation facemask for radiation therapy using additive manufacturing, pressure sensors and topology optimisation [2021]

  • Amirhossein Asfia, James I. Novak, Bernard Rolfe, and Tomas Kron
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 5, pp. 945-952.

66. Fused filament fabrication of continuous optic fiber reinforced polylactic acid composites [2021]

  • Rui Yan, Yuye Wang, Pengjun Luo, Yangbo Li, and Xiaochun Lu
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 4, pp. 766-776.

67. Processing and properties of PLA/Mg filaments for 3D printing of scaffolds for biomedical applications [2021]

  • Cristina Pascual-González, Cillian Thompson, Jimena de la Vega, Nicolás Biurrun Churruca, Juan P. Fernández-Blázquez, Iker Lizarralde, Diego Herráez-Molinero, Carlos González, and Javier LLorca
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 5, pp. 884-894.

68. Design and prototyping of GSM-bluetooth based solar energy remote monitoring system [2021]

  • Alper Kerem and Abdusselam Yazgan
  • COMPEL -The international journal for computation and mathematics in electrical and electronic engineering, 2021, Vol. 41, Issue 4, pp. 1072-1083.

69. Numerical modeling and experimental verification of the composite material of PA12/HA with parameterized random distribution in selective laser sintering [2021]

  • Junchao Li, Yanan Yang, Ze Zhao, and Ran Yan
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 5, pp. 873-883.

70. Multi-physics properties of thermoplastic polyurethane at various fused filament fabrication parameters [2021]

  • Samir Kasmi, Geoffrey Ginoux, Eric Labbé, and Sébastien Alix
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 5, pp. 895-906.

71. Slicing strategy and process of laser direct metal deposition (DMD) of the inclined thin-walled part under open-loop control [2021]

  • Liaoyuan Chen, Tianbiao Yu, Ying Chen, and Wanshan Wang
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 1, pp. 68-86.

72. Data fusion analysis in the powder-bed fusion AM process monitoring by Dempster-Shafer evidence theory [2021]

  • Yingjie Zhang, Wentao Yan, Geok Soon Hong, Jerry Fuh Hsi Fuh, Di Wang, Xin Lin, and Dongsen Ye
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 5, pp. 841-854.

73. Investigations of personalized and sustainable approach of oral drug delivery systems through additive manufacturing [2021]

  • R. Durga Prasad Reddy, Haytham Elgazzar, and Varun Sharma
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 5, pp. 855-872.

74. Ni-based alloy 713C manufactured by a selective laser melting method: characteristics of the microstructure [2021]

  • Monika, Iwona, Alexander, Bogusława, Magdalena, Dorota, Jarosław, Duchna, Cieślik, Kloshek, Adamczyk-Cieślak, Zieniuk, Moszczyńska, and Mizera
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 4, pp. 777-788.

75. Simultaneous extraction of profile and surface roughness of 3D SLM components using fringe projection method [2021]

  • Terry Yuan-Fang Chen, Yu-Lung Lo, Ze-Hong Lin, and Jui-Yu Lin
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 4, pp. 789-801.

76. Animal orthosis fabrication with additive manufacturing – a case study of custom orthosis for chicken [2021]

  • Wiktoria Maria Wojnarowska, Jakub Najowicz, Tomasz Piecuch, Michał Sochacki, Dawid Pijanka, Jolanta Trybulec, and Sławomir Miechowicz
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 5, pp. 824-832.

77. Correlation between pre- and post-treatments of additively manufactured 316L parts and the resulting low cycle fatigue behavior [2021]

  • Kai-Uwe Garthe, Kay-Peter Hoyer, Leif Hagen, Wolfgang Tillmann, and Mirko Schaper
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 5, pp. 833-840.

78. Use of 4D-printing and shape memory alloys to fabricate customized metal jewels with functional properties [2021]

  • Adelaide Nespoli, Nicola Bennato, Enrico Bassani, and Francesca Passaretti
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 5, pp. 805-813.

79. Volumetric adaptive slicing of manifold mesh for rapid prototyping based on relative volume error [2021]

  • QianyongChen, JinghuaXu, and ShuyouZhang
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 3, pp. 606-626.

80. The mechanism of process parameters influencing the AlSi10Mg side surface quality fabricated via laser powder bed fusion [2021]

  • Shimin Dai, Hailong Liao, Haihong Zhu, and Xiaoyan Zeng
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 3, pp. 514-524.

81. Predicting the effect of build orientation and process temperatures on the performance of parts made by fused filament fabrication [2021]

  • Fernando Moura Duarte, José António Covas, and Sidonie Fernandes da Costa
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 4, pp. 704-715.

82. Preparation and application of water-based nano-silver conductive ink in paper-based 3D printing [2021]

  • Chenfei Zhao, Jun Wang, and Lini Lu
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 4, pp. 747-755.

83. Microstructure and mechanical properties of hierarchical porous parts of Ti-6Al-4V alloy obtained by powder bed fusion techniques [2021]

  • Edwin Sallica-Leva, Fernando Henrique da Costa, Cláudio Teodoro Dos Santos, André Luiz Jardini, Jorge Vicente Lopes da Silva, and João Batista Fogagnolo
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 4, pp. 732-746.

84. Design and development of 3D printing assisted microwave sintering of elbow implant with biomechanical properties similar tohuman elbow [2021]

  • Dilpreet Singh, Bhavuk Garg, Pulak Mohan Pandey, and Dinesh Kalyanasundaram
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 2, pp. 390-403.

85. On the design and manufacturing of topologically optimized wings [2021]

  • Tiago Proença, Frederico Afonso, Fernando Lau, Hugo Policarpo, and João Lourenço
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 4, pp. 637-646.

86. Additive manufacturing is sustainable technology: citespace based bibliometric investigations of fused deposition modeling approach [2021]

  • Yanen Wang, Ray Tahir Mushtaq, Ammar Ahmed, Ammar Ahmed, Mudassar Rehman, MudassarRehman, Aqib Mashood Khan, Shubham Sharma, Dr Kashif Ishfaq, Haider Ali, and Thierno Gueye
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 4, pp. 654-675.

87. Manufacturing process-driven structured materials (MPDSMs): design and fabrication for extrusion-based additive manufacturing [2021]

  • Albert E. Patterson, Charul Chadha, and Iwona M. Jasiuk
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 4, pp. 716-731.

88. A study on the relationship between spectral characterization and composition of plasma in laser additive manufacturing of gradient materials [2021]

  • Bo Chen, Zheng Meng, Kai Yang, Yongzhen Yao, Caiwang Tan, and Xiaoguo Song
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 4, pp. 756-765.

89. Hydroxyapatite composite scaffold for bone regeneration via rapid prototyping technique: a review [2021]

  • Fangfang Sun, Tianze Wang, and Yong Yang
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 3, pp. 585-605.

90. Perspectives on the evolution of a fabrication laboratory in an emerging country: a comparative lexicometric study of European FabLabs [2021]

  • Helmi Ben Rejeb and Benoit Roussel
  • Journal of Manufacturing Technology Management, 2021, Vol. 33, Issue 2, pp. 399-422.

91. Coupling additive manufacturing and low-temperature sintering: a fast processing route of silicate glassy matrix [2021]

  • Danna Tang, Yushen Wang, Zheng Li, Yan Li, and Liang Hao
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 4, pp. 676-685.

92. Mechanical properties and crystallinity of polypropylene injection molded in polyjet and aluminum tooling [2021]

  • Gabriel Antonio Mendible, Nabil Saleh, Carol Barry, and Stephen P. Johnston
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 4, pp. 686-694.

93. Temperature-compensated constitutive model of fused filament fabrication 3D printed PLA materials with full extrusion temperatures [2021]

  • Kaiyang Zhu, Zichen Deng, Shi Dai, and Yajun Yu
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 1, pp. 41-51.

94. An optimisation framework for designs for additive manufacturing combining design, manufacturing and post-processing [2021]

  • Anton Wiberg, Johan Persson, and Johan Ölvander
  • Rapid Prototyping Journal, 2021, Vol. 27, Issue 11, pp. 90-105.

95. Experimental verification of computational and sensitivity analysis on substrate deformation and plastic strain induced by hollow thin-walled WAAM structure [2021]

  • Keval P. Prajadhiana, Yupiter H.P. Manurung, Alexander Bauer, Mohd Shahriman Adenan, Nur Izan Syahriah, Mohamed Ackiel Mohamed, Birgit Awiszus, Marcel Graf, and Andre Haelsig
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 3, pp. 559-572.

96. The microstructure and mechanical properties of Co/YCF102 composite coating [2021]

  • Wenchao Xi, Boxue Song, Jinlong Dong, Tianqi Zhang, Tianbiao Yu, and Jun Wang
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 4, pp. 647-653.

97. Curved layer path planning on a 5-axis 3D printer [2021]

  • Joao Duarte, Isabel Espírito Santo, M. Teresa T. Monteiro, and A. Ismael F. Vaz
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 4, pp. 629-636.

98. Additive manufacturing of anti-SARS-CoV-2 Copper-Tungsten-Silver alloy [2021]

  • John Robinson, Arun Arjunan, Ahmad Baroutaji, Miguel Martí, Alberto Tuñón Molina, Ángel Serrano-Aroca, and Andrew Pollard
  • Rapid Prototyping Journal, 2021, Vol. 27, Issue 10, pp. 1831-1849.

99. An in-process multi-feature data fusion nondestructive testing approach for wire arc additive manufacturing [2021]

  • Xi Chen, Youheng Fu, Fanrong Kong, Runsheng Li, Yu Xiao, Jiannan Hu, and Haiou Zhang
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 3, pp. 573-584.

100. Opportunities and challenges in additive manufacturing used in space sector:a comprehensive review [2021]

  • Kashif Ishfaq, Muhammad Asad, Muhammad Arif Mahmood, Mirza Abdullah, and Catalin Iulian Pruncu
  • Rapid Prototyping Journal, 2021, Vol. 28, Issue 2, pp. 253-267.

Catalog

Books, media, physical & digital resources
See catalog results

Guides

Course- and topic-based guides to collections, tools, and services.
Search ""Prototyping"" in all guide pages