articles+ search results

Printing, Three-Dimensional, Hydrogen Peroxide, and Luminescence

Low force stereolithography is exploited for the first time for one-step facile fabrication of chemiluminescence (CL) flow-through cells that bear unrivalled features as compared to those available through milling or blowing procedures or alternative 3D printing technologies. A variety of bespoke cross-section geometries with polyhedral features (namely, triangular, square, and five-side polygon) as well as semicircular cross-section are herein critically evaluated in terms of analytical performance against the standardcircular cross-section in a flat spirally-shape format. The idea behind is to maximize capture of elicited light by the new designs while leveraging 3D printing further for fabrication of (i) customized gaskets that enable reliable attaching of the active mixing zone of the CL cell to the detection window, (ii) in-line 3D-printed serpentine reactors, and (iii) flow confluences with tailorable shapes for enhancing mixing of samples with CL reagents. Up to twenty transparent functional cells were simultaneously fabricated without inner supports following post-curing and surface treatment protocols lasting less than 5 h. In fact, previous attempts to print spirally-shaped cells in one-step by resorting to less cost effective photopolymer inkjet printing technologies were unsuccessful because of the requirement of lengthy procedures (>15 days) for quantitative removal of the support material. By exploiting the phthalazinedione-hydrogen peroxide chemistry as a model reaction, the five-side irregular pentagon cell exhibited superior analytical figures of merit in terms of LOD, dynamic range and intermediate precision as compared to alternative designs. Computational fluid dynamic simulations for mapping velocities at the entry region of the spiral cell corroborated the fact that the 5-side polygon cross-section flow-cell with Y-type confluence permitted the most efficient mixing of reagents and sample while enabling larger flow velocities near the inlet that contribute to a more efficient capture of the photons from the flash-type reaction. The applicability of the 3D-printed 5-side polygon CL cell for automatic determination of hydrogen peroxide using a computerized hybrid flow system was demonstrated for the analysis of high matrix samples, viz., seawater and saliva, with relative recoveries ranging from 83 to 103%.
Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
(Copyright © 2023 Elsevier B.V. All rights reserved.)

Brain diagnostic imaging, Algorithms, Image Processing, Computer-Assisted methods, Magnetic Resonance Imaging methods, and Software

Purpose: Introduce Shimming Toolbox ( https://shimming-toolbox.org), an open-source software package for prototyping new methods and performing static, dynamic, and real-time B0 shimming as well as B1 shimming experiments.
Methods: Shimming Toolbox features various field mapping techniques, manual and automatic masking for the brain and spinal cord, B0 and B1 shimming capabilities accessible through a user-friendly graphical user interface. Validation of Shimming Toolbox was demonstrated in three scenarios: (i) B0 dynamic shimming in the brain at 7T using custom AC/DC coils, (ii) B0 real-time shimming in the spinal cord at 3T, and (iii) B1 static shimming in the spinal cord at 7T.
Results: The B0 dynamic shimming of the brain at 7T took about 10 min to perform. It showed a 47% reduction in the standard deviation of the B0 field, associated with noticeable improvements in geometric distortions in EPI images. Real-time dynamic xyz-shimming in the spinal cord took about 5 min and showed a 30% reduction in the standard deviation of the signal distribution. B1 static shimming experiments in the spinal cord took about 10 min to perform and showed a 40% reduction in the coefficient of variation of the B1 field.
Conclusion: Shimming Toolbox provides an open-source platform where researchers can collaborate, prototype and conveniently test B0 and B1 shimming experiments. Future versions will include additional field map preprocessing techniques, optimization algorithms, and compatibility across multiple MRI manufacturers.
(© 2022 International Society for Magnetic Resonance in Medicine.)

Humans, Creatinine chemistry, Limit of Detection, Smartphone, Electrochemical Techniques, Electrodes, Graphite chemistry, and Nanoparticles chemistry

3D printing technologies are an attractive for fabricating electrochemical sensors due to their ease of operation, freedom of design, fast prototyping, low waste, and low cost. We report the fabrication of a simple 3D-printed electrochemical sensing device for non-enzymatic detection of creatinine, an important indicator of renal function. To create the 3D-printed electrodes (3DE), carbon black/polylactic acid (CB/PLA) composite filament was used. The 3DE was activated using 0.5 M NaOH via amperometry prior to use to improve electrochemical performance. To give selectivity for creatinine, the activated 3DE was modified with a copper oxide nanoparticle-ionic liquid/reduced graphene oxide (CuO-IL/rGO) composite. The modified 3DE was characterized using microscopy and electrochemistry. Cyclic voltammetry and amperometry were used to evaluate sensor performance. The modified 3DE provided electrocatalytic activity towards creatinine without enzymes. Under optimal conditions, the modified 3DE directly coupled with a portable smartphone potentiostat exhibited the linear detection range of 0.5-35.0 mM, and the limit of detection was 37.3 μM, which is sufficient for detecting creatinine in human urine samples. Furthermore, the other physiological compounds present in human urine were not detected on the modified 3DE. Therefore, the modified 3DE could be a tool for effective creatinine screening in the urine.
Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
(Copyright © 2022 Elsevier B.V. All rights reserved.)

Purpose: to evaluate the efficacy of dual-purpose computer-generated splint in guiding the proximal and the distal segment in bilateral sagittal split osteotomy.
Patients and Method: It was a prospective case series study directed on 8 class III patients indicating the need of maxillary advancement and mandibular set back by bilateral sagittal split osteotomy. A CAD/CAM splint is generated to guide the distal segment to the stable maxilla and at the same time a grooved extension to engage the proximal segment ensuring the condyle in its planned position during fixation. The primary outcome was measured by calculating the difference between the pre- and post-operative condylar segment position.
Results: The present study included five female patient and three male patient with mean age of 28.4 ± 5.1 years. The accuracy of the splint in positioning the mandibular proximal segment showed promising results ranging from 2.59 to 0.49.
Conclusion: The dual-purpose splint introduced in this study showed satisfied results in maintaining the pre-operative condylar position while securing the distal segment in the desired plan.
Competing Interests: Conflict of interestThe authors declare that there is no conflict of interest (Mamdouh Ahmed declares that there is no conflict of interest, Sherif Ali declares that there is no conflict of interest and Sara Soliman declares that there is no conflict of interest).
(© This is a U.S. government work and not under copyright protection in the U.S.; foreign copyright protection may apply 2022.)

Hydrodynamics, Kinetics, Ultraviolet Rays, Disinfection methods, and Water Purification methods

We developed and studied one of the first high-flow UV-LED water disinfection reactors applicable to point-of-entry (POE) water disinfection. A multiphysics computational model was created to predict the performance of UV reactor design concepts by modeling the synergic effect of radiation, hydrodynamics, and the inactivation kinetics of microorganisms. The geometrical optics that describe light propagation in terms of rays were employed to model the radiation profile of multiple UV-LEDs with optical components in complex reactor geometries, the first account of such an approach. The computational solution of the mass, momentum, and species equations was applied to model the hydrodynamics and kinetics. We designed a reactor through a detailed computational study of the optical and hydrodynamic performance of various design strategies. Highly efficient UV fluence distribution in the reactor was achieved by creating nearly collimated UV radiation beams across the reactor and managing the hydrodynamics using a flow distributor. We fabricated a prototype of the optimized reactor design for experimental studies. Biodosimetry tests were conducted for various flow rates and UV transmittances (UVTs), and the experimental results were compared with the model predictions. The design, which employed 14 UV-LEDs assembled over custom-made optical modules, resulted in a reduction equivalent dose (RED) of 65 mJ/cm 2 at a flow rate of 20 liters per minute (LPM) while consuming about 50 W energy. This reactor design required only 0.05 W radiant power per LPM flow rate to achieve an NSF Class A UV dose equivalent of 40 mJ/cm 2 . The findings of this study provide insights into UV-LED reactor development strategies as well as the creation and application of reactor virtual prototyping tools for designing and optimizing highly efficient UV-LED reactors.
Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
(Copyright © 2023. Published by Elsevier Ltd.)

Electrons, Quantum Theory, and Software

Fanpy is a free and open-source Python library for developing and testing multideterminant wavefunctions and related ab initio methods in electronic structure theory. The main use of Fanpy is to quickly prototype new methods by making it easier to convert the mathematical formulation of a new wavefunction ansätze to a working implementation. Fanpy is designed based on our recently introduced Flexible Ansatz for N-electron Configuration Interaction (FANCI) framework, where multideterminant wavefunctions are represented by their overlaps with Slater determinants of orthonormal spin-orbitals. In the simplest case, a new wavefunction ansatz can be implemented by simply writing a function for evaluating its overlap with an arbitrary Slater determinant. Fanpy is modular in both implementation and theory: the wavefunction model, the system's Hamiltonian, and the choice of objective function are all independent modules. This modular structure makes it easy for users to mix and match different methods and for developers to quickly explore new ideas. Fanpy is written purely in Python with standard dependencies, making it accessible for various operating systems. In addition, it adheres to principles of modern software development, including comprehensive documentation, extensive testing, quality assurance, and continuous integration and delivery protocols. This article is considered to be the official release notes for the Fanpy library.
(© 2022 Wiley Periodicals LLC.)

The use of three-dimensional (3-D) technology in upper extremity surgery has the potential to revolutionize the way that hand and upper limb procedures are planned and performed. 3-D technology can assist in the diagnosis and treatment of conditions, allowing virtual preoperative planning and surgical templating. 3-D printing can allow the production of patient-specific jigs, instruments and implants, allowing surgeons to plan and perform complex procedures with greater precision and accuracy. Previously, cost has been a barrier to the use of 3-D technology, which is now falling rapidly. This review article will discuss the current status of 3-D technology and printing, including its applications, ethics and challenges in hand and upper limb surgery. We have provided case examples to outline how clinicians can incorporate 3-D technology in their clinical practice for congenital deformities, management of acute fracture and malunion and arthroplasty.

Mice, Animals, Electrodes, Prostheses and Implants, Brain, Sulfhydryl Compounds chemistry, and Nervous System

Off-stoichiometry thiol-ene-epoxy (OSTE+) thermosets show low permeability to gases and little absorption of dissolved molecules, allow direct low-temperature dry bonding without surface treatments, have a low Young's modulus, and can be manufactured via UV polymerisation. For these reasons, OSTE+ thermosets have recently gained attention for the rapid prototyping of microfluidic chips. Moreover, their compatibility with standard clean-room processes and outstanding mechanical properties make OSTE+ an excellent candidate as a novel material for neural implants. Here we exploit OSTE+ to manufacture a conformable multilayer micro-electrocorticography array with 16 platinum electrodes coated with platinum black. The mechanical properties allow conformability to curved surfaces such as the brain. The low permeability and strong adhesion between layers improve the stability of the device. Acute experiments in mice show the multimodal capacity of the array to record and stimulate the neural tissue by smoothly conforming to the mouse cortex. Devices are not cytotoxic, and immunohistochemistry stainings reveal only modest foreign body reaction after two and six weeks of chronic implantation. This work introduces OSTE+ as a promising material for implantable neural interfaces.
Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Diego Ghezzi reports financial support was provided by Medtronic plc.
(Copyright © 2022 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Humans, Cross-Sectional Studies, Taiwan, Creativity, Problem Solving, Clinical Competence, Students, Nursing, and Education, Nursing, Baccalaureate

Background: Competence in design thinking plays a pivotal role when undertaking innovative problem-solving. Our knowledge on nursing students' self-perceived design thinking competence, however, is noticeably lacking, particularly in Taiwan.
Object: To examine Taiwanese nursing students' self-perceived competence in design thinking.
Design: Descriptive, cross-sectional, quantitative study.
Participants: One hundred and one nursing students enrolled in the interdisciplinary capstone courses, which were jointly offered to industrial design students, as part of a 4-year nursing program at a science and technology university in northern Taiwan.
Methods: Self-reported questionnaire data were collected from students, including their demographics and self-perceived competence in design thinking as measured by the Creative Synthesis Inventory and the Design Thinking Traits Questionnaire between January 2020 and January 2021.
Results: Distinctive and reliable individual differences were found in nursing students' self-perceived competence in design thinking. In addition, students perceived a significantly higher creative synthesis skill of discovery in developing an understanding of potential users and a significantly lower design thinking trait of optimism, not backing down from challenging problems. Finally, greater perceived competence in creative synthesis skills were significantly correlated with greater perceived competence in all design thinking traits, except the trait of optimism.
Conclusions: Results indicated that significant individual differences exist in Taiwanese nursing students' self-perceived design thinking competence, suggesting opportunities for helping students with lower perceived competence. Overall, Taiwanese students believed themselves to be less skilled in visualization, prototyping, and evaluation as well as lacking an attribute of optimism when encountering challenging problems. Therefore, as informed by the design thinking framework, nursing schools should focus on developing strategies through training and practice to foster creative synthesis skills and designer traits in students, particularly targeting those who self-perceived as less competent and those skills and traits self-perceived as weaknesses.
Competing Interests: Declaration of competing interest No competing interests are declared by the authors.
(Copyright © 2022 The Author. Published by Elsevier Ltd.. All rights reserved.)