Keywords Tissue P System; Wireless Sensor Network; Multi-Objective problem; Task Assignment; Decision Support System; Parallel computing; Sustainable computing Abstract The contemporary wireless sensor applications employ a Heterogeneous Wireless Sensor Network (HeWSN) to achieve its multi-objective missions. Modern wireless nodes constituting the HeWSN are more versatile in terms of its capabilities, functionalities, and applications. Assigning tasks in a dynamic HeWSN environment are challenging due to its inherent heterogeneous properties and capabilities. The investigation of existing task assignment algorithms reveals (i) the majority of the existing task assignment algorithms were designed for the homogeneous environment, (ii) most of the nature-inspired algorithms were built for centralized architecture. Scheduling tasks by existing task assignment algorithms lead to underutilization of resources as well as to the rapid depletion of network resources. To this end, a novel, distributed, heterogeneous task assignment algorithm adhering the modern sensors capabilities, functionalities and sensor application to attain sustainable computing is required. Based on the investigation, Tissue P-System inspired task assignment algorithm for the distributed heterogeneous WSN has been modelled. The experimental analyses of the proposed method have been self-evaluated as well as compared with the corresponding recent benchmark algorithms under various conditions and its performance metrics are analysed. Author Affiliation: Karunya Institute of Technology & Sciences, Coimbatore, Tamil Nadu 641 114, India * Corresponding author. Article History: Received 18 November 2019; Revised 11 June 2020; Accepted 21 June 2020 (footnote) Peer review under responsibility of King Saud University. Byline: Titus Issac [firstname.lastname@example.org] (*), Salaja Silas, Elijah Blessing Rajsingh
Journal of Information Systems Education. Summer, 2020, Vol. 31 Issue 3, p179, 8 p.
Teaching -- Usage, Teaching -- Methods, and Teaching -- Study and teaching
Given the ubiquity of interfaces on computing devices, it is essential for future Information Systems (IS) professionals to understand the ramifications of good user interface (UI) design. This article provides instructions on how to efficiently and effectively teach IS students about "fit," a Human-Computer Interaction (HCI) concept, through a paper prototyping activity. Although easy to explain, the concept of "fit" can be difficult to understand without repeated practice. Practically, designing "fit" into UIs can be cost-prohibitive because working prototypes are often beyond students' technical skillset. Accordingly, based on principles of active learning, we show how to use paper prototyping to demonstrate "fit" in a hands-on class exercise. We provide detailed stepby-step instructions to plan, setup, and present the exercise to guide students through the process of "fit" in UI design. As a result of this activity, students are better able to employ both theoretical and practical applications of "fit" in UI design and implementation. This exercise is applicable in any course that includes UI design, such as principles of HCI, systems analysis and design, software engineering, and project management. Keywords: Human-computer interaction (HCI), Paper prototyping, Active learning, Constructionism, Teaching tip 1. INTRODUCTION With computing devices peppering nearly every aspect of our lives, how people interact with these technologies is critically important to all computing fields. In fact, failure to properly [...]
To purchase or authenticate to the full-text of this article, please visit this link: http://onlinelibrary.wiley.com/doi/10.1002/rcs.1895/abstract Byline: Mohamed Farid Shehab, Nabila Mohammed Abdel Hamid, Nevien Abdullatif Askar, Ahmed Mokhtar Elmardenly Keywords: CAD-CAM, electron beam melting; immediate mandibular reconstruction; patient-specific titanium mesh; rapid prototyping Abstract Background Immediate mandibular reconstruction was performed using a patient-specific titanium mesh tray fabricated by electron beam melting (EBM) /rapid prototyping techniques. Methods Patient-specific titanium trays were virtually designed and fabricated using EBM technology/rapid prototyping for patients requiring mandibular resection and immediate reconstruction using an iliac crest bone graft. Dental implants were placed in the grafted sites and the patients received prosthetic rehabilitation with a follow-up of one year. Clinical data, postoperative bone formation and complications were evaluated. Results A symmetric appearance of facial contours was achieved. The titanium tray incorporated the particulate iliac crest bone graft that provided significant bone formation (mean 18.97 [+ or -] 1.45 mm) and predictable results. Stability of the dental implants was achieved. Conclusion The patient-specific titanium meshes and immediate particulate autogenous bone graft showed satisfactory clinical and surgical results in improving patients' quality of life and decreasing the overall treatment time with adequate functional rehabilitation.
Kondaveeti, Hari Kishan, Kumaravelu, Nandeesh Kumar, Vanambathina, Sunny Dayal, Mathe, Sudha Ellison, and Vappangi, Suseela
Computer Science Review. May, 2021, Vol. 40
Keywords Raspberry Pi; BeagleBone; Sharks Cove; Waspmote Abstract Arduino, an open-source electronics platform, has become the go-to option for anyone working on interactive hardware and software projects. An Arduino board (such as the Uno) connected to a breadboard with plugins such as inputs, sensors, lights, and displays can be controlled by a code written in the Arduino development environment. How to achieve this is by prototyping with Arduino. Prototyping with Arduino has grown in popularity with the increased use of the Arduino platform. Prototyping with Arduino, however, is not an easy task for nonprogrammers with interest in the field. With increased public interest in the field will come a need for accessible information. This paper presents a methodical literature review intended to intensively analyze and compare existing primary studies on prototyping with Arduino. We found about 130 of such studies, all peer-reviewed and published within the last 15 years, including these years (2015--2020). These studies were tediously and carefully chosen through a three-step process. In this paper, a cautious analysis of selected studies was followed by a clear description of the methods applied. The methods were categorized according to the success rate of the studied prototypes. Results obtained can be used in researches on the best technique to adopt while prototyping with Arduino. They can also be used in electronics researches and by individuals who wish to obtain a guide on prototyping with Arduino despite lacking grounded knowledge of the subject matter. Author Affiliation: (a) School of Computer Science & Engineering, VIT-AP University, Beside AP Secretariat, Near Vijayawada, Andhra Pradesh, India (b) School of Electronics Engineering, VIT-AP University, Beside AP Secretariat, Near Vijayawada, Andhra Pradesh, India * Corresponding author. Article History: Received 22 September 2020; Accepted 13 January 2021 Byline: Hari Kishan Kondaveeti [email@example.com] (a,*), Nandeesh Kumar Kumaravelu (b), Sunny Dayal Vanambathina (b), Sudha Ellison Mathe (b), Suseela Vappangi (b)
Drilling and boring -- Models, Control systems -- Models, Vibration -- Models, and Oil well drilling rigs -- Models
This paper presents a control system design methodology for the drill-string rotary drive and draw-works hoist system aimed at mature drilling rig retrofitting. The rotary drive is equipped with an active damping speed control system featuring a proportional-integral speed controller readily available within modern controlled electrical drives, extended with drill-string back-spinning prevention scheme for the case of stuck tool. The draw-works hoist system features a tool normal force (Weight-on-Bit) controller with tool longitudinal speed (Rate-of-Penetration) limiting functionality. The design of proposed control systems has been based on suitable control-oriented process models and damping optimum criterion which guarantees a desired level of closed-loop system damping. The proposed drilling control systems have been verified on a downscaled laboratory experimental setup, which represents a necessary pre-requirement before these systems are tested in the field. Keywords: active damping; draw-work; laboratory setup; petroleum drilling; proportional-integral controller; retrofitting; top-drive; torsional vibrations 1 INTRODUCTION Diminishing petroleum reserves and related increase in its prices  generally stimulate the discovery of new reserves , and implementation of advanced drilling technologies , especially those aimed [...]