Haller, Norm, author. and National Research Council (U.S.). Air Force Studies Board, issuing body.
Prototypes, Engineering -- Congresses., Rapid prototyping -- Congresses., and Military research -- United States -- Planning -- Congresses.
"Assessment to Enhance Air Force and Department of Defense Prototyping for the New Defense Strategy is the summary of a workshop convened by the Air Force Studies Board of the National Academies' National Research Council in September 2013 to enhance Air Force and Department of Defense (DoD) prototyping for the new defense strategy. This workshop examined of a wide range of prototyping issues, including individual recommendations for a renewed prototype program, application of prototyping as a tool for technology/system development and sustainment (including annual funding), and positive and negative effects of a renewed program. Prototyping has historically been of great benefit to the Air Force and DoD in terms of risk reduction and concept demonstration prior to system development, advancing new technologies, workforce enhancement and skills continuity between major acquisitions, dissuasion of adversaries by demonstrating capabilities, maintaining technological surprise through classified technologies, and an overarching strategy of overall risk reduction during austere budget environments. Over the last two decades, however, many issues with prototyping have arisen. For example, the definitions and terminology associated with prototyping have been convoluted and budgets for prototyping have been used as offsets to remedy budget shortfalls. Additionally, prototyping has been done with no strategic intent or context, and both government and industry have misused prototyping as a key tool in the DoD and defense industrial base. Assessment to Enhance Air Force and Department of Defense Prototyping for the New Defense Strategy envisions a prototyping program that encourages innovation in new concepts and approaches and provides a means to assess and reduce risk before commitment to major new programs."--Publisher's description.
Polo-Lopez, Lucas, Masa-Campos, Jose L., and Ruiz-Cruz, Jorge A.
International Journal of RF and Microwave Computer-Aided Engineering. Dec 2019, Vol. 29 Issue 12, n/a
Satellite communications, Antennas (Electronics) -- Design and construction, Waveguides -- Design and construction, Sintering, 3D printing, and Computer-aided design
Keywords: additive manufacturing; fused filament fabrication; phase shifter; reconfigurable; selective laser sintering; waveguide Abstract This work presents the design and manufacturing of a K-band reconfigurable phase shifter completely implemented in waveguide technology for reduced insertion loss, good matching, and large phase shifting range. The device is based on the combination of a short slot coupler and two tunable reactive loads implemented as a section of short-circuited waveguide where an adjustable metallic post is inserted. Three prototypes of this design have been manufactured using different techniques (conventional computer numerical control machining, a low-cost fused filament fabrication technique and direct metal laser sintering) in order to assess its performance for different applications. The prototypes have been characterized experimentally and the achieved results are evaluated and compared. The proposed phase shifter, since it is fully developed in waveguide technology, eliminates the need of adding transitions to planar structures in order to integrate lumped components like pin diodes or varactors. Therefore, this device has a great potential in high-power beam steering phased arrays. Biographical information: Lucas Polo-Lopez received the BSc and MSc degrees in Telecommunication Engineering from the Universidad Autonoma de Madrid, Madrid, Spain in 2014 and 2016, respectively. Since 2015 he has been with the Radiofrequency Circuits, Antennas and Systems (RFCAS) group of this same university, where he works toward the PhD degree. His current research interests include the computer-aided design of horn antennas and passive waveguide devices, as well as the application of additive manufacturing techniques to the construction of waveguide devices. Jose L. Masa-Campos received the Master degree in 1999 and the PhD Degree in 2006, from the Universidad Politecnica de Madrid, Spain. From 1999 to 2003 he developed his professional activity in the R&D department of the company RYMSA with the design of base station antennas for mobile communications and satellite antennas. From 2002 to 2003 he directed the R&D department of RYMSA. From 2003 to 2007, he worked as Researcher for Universidad Politecnica de Madrid, and in 2005 he joined to Universidad Autonoma de Madrid as Associate Professor in the Radiofrequency Circuits, Antennas and Systems (RFCAS) group. His main current research interests are in active and passive planar array antennas. Jorge A. Ruiz-Cruz received the Ingeniero de Telecomunicacion degree and the PhD degree from the Universidad Politecnica de Madrid, Madrid, Spain, in 1999 and 2005, respectively. Since 2006, he has been with the Universidad Autonoma de Madrid, Madrid, where he became an Associate Professor in 2009. His current research interests include the computer-aided design of microwave passive devices and circuits (filters, multiplexers, and orthomodes). Byline: Lucas Polo-Lopez,Jose L. Masa-Campos,Jorge A. Ruiz-Cruz
Disability and rehabilitation. Assistive technology [Disabil Rehabil Assist Technol] 2020 Nov; Vol. 15 (8), pp. 945-951. Date of Electronic Publication: 2019 Jun 28.
Aim: This paper presents the study, design and prototyping of a manual wheelchair, named handwheelchair.q, with an innovative propulsion's system. The research is based on a novel system of propulsion that is more efficient and ergonomic than the hand rim one. The main goal of the designed prototype is to facilitate the mobility and to extend the reachable areas while reducing the required time. Methods: The propulsion is realised through a rowing-inspired gesture. Results: This gesture avoids the damages caused on shoulders by the compressive force of the hand rim and lever systems. Conclusion: The prototyping allowed the analysis of the project parameters and their influence on the kinematic characteristics of the prototype and the biomechanical characteristics of the gesture. The same propulsion's system can be adopted on wheelchairs devoted to sport activities, representing the starting point for a future prototype of racing wheelchairs. In this regard, the wheelchair's braking system has been redesigned in order to improve efficiency and safety.Implication for rehabilitationThe use of the Handwheelchair.q may have positive impacts in terms of the quality of life, in order to reduce the shoulder pain caused by the handrim and lever system.In addition, it can be a good tool for rehabilitation because the activity can be performed outdoor.
Biomedicines [Biomedicines] 2020 Oct 18; Vol. 8 (10). Date of Electronic Publication: 2020 Oct 18.
CO 2 laser manufacturing has served as an enabling and reliable tool for rapid and cost-effective microfabrication over the past few decades. While a wide range of industrial and biological applications have been studied, the choice of materials fabricated across various laser parameters and systems is often confounded by their complex combinations. We herein presented a unified procedure performed using percussion CO 2 laser drilling with a range of laser parameters, substrate materials and various generated microstructures, enabling a variety of downstream tissue/cellular-based applications. Emphasis is placed on delineating the laser drilling effect on different biocompatible materials and proof-of-concept utilities. First, a polydimethylsiloxane (PDMS) microneedle (MN) array mold is fabricated to generate dissolvable polyvinylpyrrolidone/polyvinyl alcohol (PVP/PVA) MNs for transdermal drug delivery. Second, polystyrene (PS) microwells are optimized in a compact array for the formation of size-controlled multicellular tumor spheroids (MCTSs). Third, coverglass is perforated to form a microaperture that can be used to trap/position cells/spheroids. Fourth, the creation of through-holes in PS is validated as an accessible method to create channels that facilitate medium exchange in hanging drop arrays and as a conducive tool for the growth and drug screenings of MCTSs.
INTERNET BUSINESS NEWS-(C)1995-2020 M2 COMMUNICATIONS PRO DESIGN, veteran in the E[sup.2]MS industry and supplier of high-speed ASIC and SoC verification platforms, has launched its new proFPGA UNO, DUO and QUAD [...]
Synopsys Inc., Computer software industry, and Power electronics
Support the needs of EV design which includes EV model libraries for power electronic, microcontrollers and AUTOSAR components Enables more productive development and rapid scaling of test activities by removing [...]
Gibson, I. (Ian), Rosen, D. W. (David W.), Stucker, B. (Brent), and Gibson, I. (Ian)
Manufacturing processes -- Automation., Production control -- Automation., CAD/CAM systems., and Rapid Prototyping (Fertigung)
"Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing deals with various aspects of joining materials to form parts. Additive Manufacturing (AM) is an automated technique for direct conversion of 3D CAD data into physical objects using a variety of approaches. Manufacturers have been using these technologies in order to reduce development cycle times and get their products to the market quicker, more cost effectively, and with added value due to the incorporation of customizable features. Realizing the potential of AM applications, a large number of processes have been developed allowing the use of various materials ranging from plastics to metals for product development. Authors Ian Gibson, David W. Rosen and Brent Stucker explain these issues, as well as: Providing a comprehensive overview of AM technologies plus descriptions of support technologies like software systems and post-processing approaches ; Discussing the wide variety of new and emerging applications like micro-scale AM, medical applications, direct write electronics and Direct Digital Manufacturing of end-use components ; Introducing systematic solutions for process selection and design for AM. Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing is the perfect book for researchers, students, practicing engineers, entrepreneurs, and manufacturing industry professionals interested in additive manufacturing."--Publisher's website.
Byline: Mohamed Farid Shehab, Nabila Mohammed Abdel Hamid, Nevien Abdullatif Askar, Ahmed Mokhtar Elmardenly Keywords: CAD-CAM, electron beam melting; immediate mandibular reconstruction; patient-specific titanium mesh; rapid prototyping Abstract Background Immediate mandibular reconstruction was performed using a patient-specific titanium mesh tray fabricated by electron beam melting (EBM) /rapid prototyping techniques. Methods Patient-specific titanium trays were virtually designed and fabricated using EBM technology/rapid prototyping for patients requiring mandibular resection and immediate reconstruction using an iliac crest bone graft. Dental implants were placed in the grafted sites and the patients received prosthetic rehabilitation with a follow-up of one year. Clinical data, postoperative bone formation and complications were evaluated. Results A symmetric appearance of facial contours was achieved. The titanium tray incorporated the particulate iliac crest bone graft that provided significant bone formation (mean 18.97 [+ or -] 1.45 mm) and predictable results. Stability of the dental implants was achieved. Conclusion The patient-specific titanium meshes and immediate particulate autogenous bone graft showed satisfactory clinical and surgical results in improving patients' quality of life and decreasing the overall treatment time with adequate functional rehabilitation.
Particles kicked by external forces to produce mobility distinct from thermal diffusion are an iconic feature of the active matter problem. Here, we map this onto a minimal model for experiment and theory covering the wide time and length scales of usual active matter systems. A particle diffusing in a harmonic potential generated by an optical trap is kicked by programmed forces with time correlation at random intervals following the Poisson process. The model's generic simplicity allows us to find conditions for which displacements are Gaussian (or not), how diffusion is perturbed (or not) by kicks, and quantifying heat dissipation to maintain the non-equilibrium steady state in an active bath. The model reproduces experimental results of tracer mobility in an active bath of swimming algal cells. It can be used as a stochastic dynamic simulator for Brownian objects in various active baths without mechanistic understanding, owing to the generic framework of the protocol.