articles+ search results

12,686 articles+ results

1 - 20
View results as:
Number of results to display per page

1. An Open Source Power System Simulator in Python for Efficient Prototyping of WAMPAC Applications [2021]

  • Haugdal, Hallvar and Uhlen, Kjetil
Subjects
Electrical Engineering and Systems Science - Systems and Control
Abstract
An open source software package for performing dynamic RMS simulation of small to medium-sized power systems is presented, written entirely in the Python programming language. The main objective is to facilitate fast prototyping of new wide area monitoring, control and protection applications for the future power system by enabling seamless integration with other tools available for Python in the open source community, e.g. for signal processing, artificial intelligence, communication protocols etc. The focus is thus transparency and expandability rather than computational efficiency and performance. The main purpose of this paper, besides presenting the code and some results, is to share interesting experiences with the power system community, and thus stimulate wider use and further development. Two interesting conclusions at the current stage of development are as follows: First, the simulation code is fast enough to emulate real-time simulation for small and medium-size grids with a time step of 5 ms, and allows for interactive feedback from the user during the simulation. Second, the simulation code can be uploaded to an online Python interpreter, edited, run and shared with anyone with a compatible internet browser. Based on this, we believe that the presented simulation code could be a valuable tool, both for researchers in early stages of prototyping real-time applications, and in the educational setting, for students developing intuition for concepts and phenomena through real-time interaction with a running power system model.
Comment: This work has been submitted to the IEEE for possible publication

2. Aligning Robot's Behaviours and Users' Perceptions Through Participatory Prototyping [2021]

  • Carreno-Medrano, Pamela, Tian, Leimin, Allen, Aimee, Sumartojo, Shanti, Mintrom, Michael, Coronado, Enrique, Venture, Gentiane, Croft, Elizabeth, and Kulic, Dana
Subjects
Computer Science - Robotics
Abstract
Robots are increasingly being deployed in public spaces. However, the general population rarely has the opportunity to nominate what they would prefer or expect a robot to do in these contexts. Since most people have little or no experience interacting with a robot, it is not surprising that robots deployed in the real world may fail to gain acceptance or engage their intended users. To address this issue, we examine users' understanding of robots in public spaces and their expectations of appropriate uses of robots in these spaces. Furthermore, we investigate how these perceptions and expectations change as users engage and interact with a robot. To support this goal, we conducted a participatory design workshop in which participants were actively involved in the prototyping and testing of a robot's behaviours in simulation and on the physical robot. Our work highlights how social and interaction contexts influence users' perception of robots in public spaces and how users' design and understanding of what are appropriate robot behaviors shifts as they observe the enactment of their designs.
Comment: 7 pages, ICRA 2021 submission

3. Tonic: A Deep Reinforcement Learning Library for Fast Prototyping and Benchmarking [2020]

  • Pardo, Fabio
Subjects
Computer Science - Machine Learning
Abstract
Deep reinforcement learning has been one of the fastest growing fields of machine learning over the past years and numerous libraries have been open sourced to support research. However, most codebases have a steep learning curve or limited flexibility that do not satisfy a need for fast prototyping in fundamental research. This paper introduces Tonic, a Python library allowing researchers to quickly implement new ideas and measure their importance by providing: 1) a collection of configurable modules such as exploration strategies, replays, neural networks, and updaters 2) a collection of baseline agents: A2C, TRPO, PPO, MPO, DDPG, D4PG, TD3 and SAC built with these modules 3) support for the two most popular deep learning frameworks: TensorFlow 2 and PyTorch 4) support for the three most popular sets of continuous-control environments: OpenAI Gym, DeepMind Control Suite and PyBullet 5) a large-scale benchmark of the baseline agents on 70 continuous-control tasks 6) scripts to experiment in a reproducible way, plot results, and play with trained agents.
Comment: NeurIPS 2020 Deep RL Workshop, code: https://github.com/fabiopardo/tonic

4. An XR rapid prototyping framework for interoperability across the reality spectrum [2021]

  • Geronikolakis, Efstratios and Papagiannakis, George
Subjects
Computer Science - Graphics, Computer Science - Human-Computer Interaction, 68U99, D.2.2, and D.2.12
Abstract
Applications of the Extended Reality (XR) spectrum, a superset of Mixed, Augmented and Virtual Reality, are gaining prominence and can be employed in a variety of areas, such as virtual museums. Examples can be found in the areas of education, cultural heritage, health/treatment, entertainment, marketing, and more. The majority of computer graphics applications nowadays are used to operate only in one of the above realities. The lack of applications across the XR spectrum is a real shortcoming. There are many advantages resulting from this problem's solution. Firstly, releasing an application across the XR spectrum could contribute in discovering its most suitable reality. Moreover, an application could be more immersive within a particular reality, depending on its context. Furthermore, its availability increases to a broader range of users. For instance, if an application is released both in Virtual and Augmented Reality, it is accessible to users that may lack the possession of a VR headset, but not of a mobile AR device. The question that arises at this point, would be "Is it possible for a full s/w application stack to be converted across XR without sacrificing UI/UX in a semi-automatic way?". It may be quite difficult, depending on the architecture and application implementation. Most companies nowadays support only one reality, due to their lack of UI/UX software architecture or resources to support the complete XR spectrum. In this work, we present an "automatic reality transition" in the context of virtual museum applications. We propose a development framework, which will automatically allow this XR transition. This framework transforms any XR project into different realities such as Augmented or Virtual. It also reduces the development time while increasing the XR availability of 3D applications, encouraging developers to release applications across the XR spectrum.

5. FPGA prototyping of synchronized chaotic map for UAV secure communication [2020]

  • Nwachioma, Christian, Ezuma, Martins, and Medaiyese, Olusiji . O.
Subjects
Electrical Engineering and Systems Science - Signal Processing
Abstract
We propose a design that uses the principle of chaos for UAV secure communication. A UAV identified as an aerial base station communicates with a ground base station over an RF channel. The communication units have dynamics based on the logistic map. The map is chaotic in the appropriate parameter space. Its states are non-periodic, broadband, and noise-like in the frequency domain. They are useful for spreading information during transmission, making it difficult for an eavesdropper to recover the modulated message since state prediction is ultimately impossible. To retrieve it, we propose a variable feedback controller. It asymptotically stabilizes the error dynamics when the information source is off. During transmission, the controller synchronizes the units such that the error contains signatures of the information signal. Therefore, the information signal is retrievable by a suitable detection mechanism. Security depends on the confidentiality of the map, the variable feedback controller, including its scale factor and bounded feedback gain, and the designer`s choice of invertible function for use in the scrambling and descrambling process. Also, the method is less prone to jamming attacks and multipath effects as the broadband spectrum can be used to randomly select RF channels. It uses only a few simple algorithms, including a correlation summation and a detection mechanism. The algorithms collect subsamples of the received signal sequences and averages over each subsample length. The method requires minimal programming efforts and low hardware resource utilization. It is energy-efficient, which is a vital consideration for any UAV security model. Moreover, we realize a prototype of the communication system on field-programmable gate arrays. We presented a digital design of the secure communication system involving the transmission of bitstreams between the ABS and GBS.
Comment: 7 pages, 9 figures, 2021 IEEE Aerospace

6. Expanding Access to Music Technology -- Rapid Prototyping Accessible Instrument Solutions For Musicians With Intellectual Disabilities [2020]

  • Jarvis-Holland, Quinn, Cortez, Crystal, Nathan, Gamill, and Botello, Francisco
Subjects
Computer Science - Sound, Computer Science - Human-Computer Interaction, Electrical Engineering and Systems Science - Audio and Speech Processing, and H.5.5
Abstract
Using open-source and creative coding frameworks, a teamof artist-engineers from Portland Community College work-ing with artists who experience Intellectual/Developmentaldisabilities prototyped an ensemble of adapted instrumentsand synthesizers that facilitate real-time in-key collabora-tion. The instruments employ a variety of sensors, send-ing the resulting musical controls to software sound gener-ators via MIDI. Careful consideration was given to the bal-ance between freedom of expression, and curating the pos-sible sonic outcomes as adaptation. Evaluation of adaptedinstrument design may differ greatly from frameworks forevaluating traditional instruments or products intended formass-market, though the results of such focused and indi-vidualised design have a variety of possible applications.
Comment: Proceedings of the International Conference on New Interfaces for Musical Expression, 2020

7. In Search of Outstanding Research Advances: Prototyping the creation of an open dataset of 'editorial highlights' [2020]

  • Mugabushaka, Alexis-Michel, Sadat, Jasmin, and Faria, Jorge Costa Dantas
Subjects
Computer Science - Digital Libraries
Abstract
A long-standing research question in bibliometrics is how one identifies publications, which represent major advances in their fields, making high impact in there and other areas. In this context, the term "Breakthrough" is often used and commonly used approaches rely on citation links between publications implicitly positing that peers who use or build upon previously published results collectively inform about their standing in terms of advancing the research frontiers. Here we argue that the "Breakthrough" concept is rooted in the Kuhnian model of scientific revolution which has been both conceptually and empirically challenged. A more fruitful approach is to consider various ways in which authoritative actors in scholarly communication system signal the importance of research results. We bring to discussions different "recognition channels" and pilot the creation of an open dataset of editorial highlights from regular lists of notable research advances. The dataset covers the last ten years and includes: the "discoveries of the year" from Science magazine and La Recherche and weekly editorial highlights from Nature ("research highlights") and Science ("editor's choice"). The final dataset includes 230 entries in the "discoveries of the years" (with over 720 references) and about 9,000 weekly highlights (with over 8,000 references).

8. Cloud2Edge Elastic AI Framework for Prototyping and Deployment of AI Inference Engines in Autonomous Vehicles [2020]

  • Grigorescu, Sorin, Cocias, Tiberiu, Trasnea, Bogdan, Margheri, Andrea, Lombardi, Federico, and Aniello, Leonardo
Subjects
Computer Science - Software Engineering, Computer Science - Artificial Intelligence, and Computer Science - Distributed, Parallel, and Cluster Computing
Abstract
Self-driving cars and autonomous vehicles are revolutionizing the automotive sector, shaping the future of mobility altogether. Although the integration of novel technologies such as Artificial Intelligence (AI) and Cloud/Edge computing provides golden opportunities to improve autonomous driving applications, there is the need to modernize accordingly the whole prototyping and deployment cycle of AI components. This paper proposes a novel framework for developing so-called AI Inference Engines for autonomous driving applications based on deep learning modules, where training tasks are deployed elastically over both Cloud and Edge resources, with the purpose of reducing the required network bandwidth, as well as mitigating privacy issues. Based on our proposed data driven V-Model, we introduce a simple yet elegant solution for the AI components development cycle, where prototyping takes place in the cloud according to the Software-in-the-Loop (SiL) paradigm, while deployment and evaluation on the target ECUs (Electronic Control Units) is performed as Hardware-in-the-Loop (HiL) testing. The effectiveness of the proposed framework is demonstrated using two real-world use-cases of AI inference engines for autonomous vehicles, that is environment perception and most probable path prediction.
Comment: 21 pages Published in Sensors: https://www.mdpi.com/1424-8220/20/19/5450

9. The ABC130 barrel module prototyping programme for the ATLAS strip tracker [2020]

  • Poley, Luise, Sawyer, Craig, Addepalli, Sagar, Affolder, Anthony, Allongue, Bruno, Allport, Phil, Anderssen, Eric, Anghinolfi, Francis, Arguin, Jean-François, Arling, Jan-Hendrik, Arnaez, Olivier, Asbah, Nedaa Alexandra, Ashby, Joe, Asimakopoulou, Eleni Myrto, Atlay, Naim Bora, Bartsch, Ludwig, Basso, Matthew J., Beacham, James, Beaupré, Scott L., Beck, Graham, Beichert, Carl, Bergsten, Laura, Bernabeu, Jose, Bhattarai, Prajita, Bloch, Ingo, Blue, Andrew, Bochenek, Michal, Botte, James, Boynton, Liam, Brenner, Richard, Brueers, Ben, Buchanan, Emma, Bullard, Brendon, Capocasa, Francesca, Carr, Isabel, Carra, Sonia, Chao, Chen Wen, Chen, Jiayi, Chen, Liejian, Chen, Yebo, Chen, Xin, Cindro, Vladimir, Ciocio, Alessandra, Civera, Jose V., Cormier, Kyle, Cornell, Ella, Crick, Ben, Dabrowski, Wladyslaw, Dam, Mogens, David, Claire, Demontigny, Gabriel, Dette, Karola, DeWitt, Joel, Diez, Sergio, Doherty, Fred, Dopke, Jens, Dressnandt, Nandor, Edwards, Sam, Fadeyev, Vitaliy, Farrington, Sinead, Fawcett, William, Fernandez-Tejero, Javier, Filmer, Emily, Fleta, Celeste, Gallop, Bruce, Galloway, Zachary, Argos, Carlos Garcia, Garg, Diksha, Gignac, Matthew, Gillberg, Dag, Giovinazzo, Dena, Glover, James, Goettlicher, Peter, Gonella, Laura, Gorišek, Andrej, Grant, Charles, Grant, Fiona, Gray, Calum, Greenall, Ashley, Gregor, Ingrid-Maria, Greig, Graham, Grillo, Alexander A., Gu, Shan, Guescini, Francesco, da Costa, Joao Barreiro Guimaraes, Gunnell, Jane, Gupta, Ruchi, Haber, Carl, Halgeri, Amogh, Hamersly, Derek, Haugen, Tom-Erik, Hauser, Marc, Heim, Sarah, Heim, Timon, Helling, Cole, Herde, Hannah, Hessey, Nigel P., Hommels, Bart, Hönig, Jan Cedric, Hunter, Amelia, Jackson, Paul, Jewkes, Keith, John, Jaya John, Johnson, Thomas Allan, Jones, Tim, Kachiguin, Serguei, Kang, Nathan, Kaplon, Jan, Kareem, Mohammad, Keener, Paul, Keller, John, Key-Charriere, Michelle, Kilani, Samer, Kisliuk, Dylan, Klein, Christoph Thomas, Koffas, Thomas, Kramberger, Gregor, Krizka, Karol, Kroll, Jiri, Kuehn, Susanne, Kurth, Matthew, Labitan, Charilou, Lacasta, Carlos, Lacker, Heiko, Leitao, Pedro Vicente, León, Pablo, Li, Boyang, Li, Chenyang, Li, Yiming, Li, Zhiying, Liang, Zhijun, Liberatore, Marianna, Lister, Alison, Liu, Kai, Liu, Peilian, Lohse, Thomas, Lönker, Jonas, Lou, Xinchou, Lu, Weiguo, Luce, Zachary, Lynn, David, MacFadyen, Ross, Mägdefessel, Sven, Mahboubi, Kambiz, Malik, Usha, Mandić, Igor, La Marra, Daniel, Martin, Jean-Pierre, Martinez-Mckinney, Forest, Mikestikova, Marcela, Mikuž, Marko, Mitra, Ankush, Mladina, Evan, Montalbano, Alyssa, Monzat, David, Morii, Masahiro, Mullier, Geoffrey, Neundorf, Jonas, Newcomer, Mitch, Ng, Yanwing, Nikolica, Adrian, Nikolopoulos, Konstantinos, Oechsle, Jan, Oliver, Jason, Orr, Robert S., Ottino, Gregory, Paillard, Christian, Pani, Priscilla, Paowell, Sam, Parzefall, Ulrich, Phillips, Peter W., Platero, Adrián, Platero, Vicente, Prahl, Volker, Pyatt, Simon, Ran, Kunlin, Reardon, Nikita, Rehnisch, Laura, Renardi, Alessia, Renzmann, Martin, Rifki, Othmane, Rodriguez, Arturo Rodriguez, Rosin, Guy, Rossi, Edoardo, Ruggeri, Tristan, Rühr, Frederik, Rymaszewski, Piotr, Sadrozinski, Hartmut F. -W., Sanethavong, Phathakone, Santpur, Sai Neha, Scharf, Christian, Schillaci, Zach, Schmitt, Stefan, Sharma, Abhishek, Sciolla, Gabriella, Seiden, Abraham, Shi, Xin, Simpson-Allsop, Cameron, Snoek, Hella, Snow, Steve, Solaz, Carles, Soldevila, Urmila, Sousa, Filipe, Sperlich, Dennis, Staats, Ezekiel, Stack, Tynan Louis, Stanitzki, Marcel, Starinsky, Nikolai, Steentoft, Jonas, Stegler, Martin, Stelzer, Bernd, Stucci, Stefania, Swientek, Krzysztof, Taylor, Geoffrey N., Taylor, Wendy, Teoh, Jia Jian, Teuscher, Richard, Thomas, Jürgen, Tigchelaar, Allen, Tran, Tony, Tricoli, Alessandro, Trischuk, Dominique Anderson, Unno, Yoshinobu, van Nieuwenhuizen, Gerrit, Ullán, Miguel, Vermeulen, Jos, Vickey, Trevor, Vidal, Guillem, Vreeswijk, Marcel, Warren, Matt, Weidberg, Tony, Wiehe, Moritz, Wiglesworth, Craig, Wiik-Fuchs, Liv, Williams, Scott, Wilson, John, Witharm, Rhonda, Wizemann, Felix, Wonsak, Sven, Worm, Steve, Wormald, Mike, Xella, Stefania, Yang, Yuzhen, Yarwick, Joseph, Yu, Tang-Fai, Zhang, Dengfeng, Zhang, Kaili, Zhou, Maosen, and Zhu, Hongbo
  • published 3 September 2020, Journal of Instrumentation, Volume 15, September 2020
Subjects
Physics - Instrumentation and Detectors and High Energy Physics - Experiment
Abstract
For the Phase-II Upgrade of the ATLAS Detector, its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100 % silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000 modules in the forward region (end-caps), which are foreseen to be constructed over a period of 3.5 years. The construction of each module consists of a series of assembly and quality control steps, which were engineered to be identical for all production sites. In order to develop the tooling and procedures for assembly and testing of these modules, two series of major prototyping programs were conducted: an early program using readout chips designed using a 250 nm fabrication process (ABCN-25) and a subsequent program using a follow-up chip set made using 130 nm processing (ABC130 and HCC130 chips). This second generation of readout chips was used for an extensive prototyping program that produced around 100 barrel-type modules and contributed significantly to the development of the final module layout. This paper gives an overview of the components used in ABC130 barrel modules, their assembly procedure and findings resulting from their tests.
Comment: 82 pages, 66 figures

10. toki: A Build- and Test-Platform for Prototyping and Evaluating Operating System Concepts in Real-Time Environments [2020]

  • Horst, Oliver and Baumgarten, Uwe
Subjects
Computer Science - Operating Systems
Abstract
Typically, even low-level operating system concepts, such as resource sharing strategies and predictability measures, are evaluated with Linux on PC hardware. This leaves a large gap to real industrial applications. Hence, the direct transfer of the results might be difficult. As a solution, we present toki, a prototyping and evaluation platform based on FreeRTOS and several open-source libraries. toki comes with a unified build- and test-environment based on Yocto and Qemu, which makes it well suited for rapid prototyping. With its architecture chosen similar to production industrial systems, toki provides the ground work to implement early prototypes of real-time systems research results, up to technology readiness level 7, with little effort.
Comment: Appeared in proceedings of the Open Demo Session of Real-Time Systems (RTSS@Work) held in conjunction with the 40th IEEE Real-Time Systems Symposium (RTSS)

11. Prototyping of a 25 Gbps optical transmitter for applications in high-energy physics experiments [2020]

  • Chao, C. -P., Chen, S. -W., Gong, D., Hou, S., Huang, X., Li, C. -Y., Liu, C., Liu, T., Qi, M., Ye, J., Zhao, X., Zhang, L., and Zhou, W.
Subjects
Physics - Instrumentation and Detectors and High Energy Physics - Experiment
Abstract
Development of optical links with 850 nm multi-mode vertical-cavity surface-emitting lasers (VCSELs) has advanced to 25 Gbps in speed. For applications in high-energy experiments, the transceivers are required to be tolerant in radiation and particle fields. We report on prototyping of a miniature transmitter named MTx+, which is developed for high speed transmission with the dual-channel laser driver LOCld65 and 850 nm VCSELs packaged in TOSA format. The LOCld65 is fabricated in the TSMC 65 nm process and is packaged in the QFN-40 for assembly. The MTx+ modules and test kits were first made with PCB and components qualified for 10 Gbps applications, and were tested for achieving 14 Gbps. The data transfer rate of the MTx+ module is investigated further for the speed of up to 25 Gbps. The LOCld65 is examined with post-layout simulation and the module design upgraded with components including the TOSA qualified for 25 Gbps applications. The PCB material is replaced by the Panasonic MEGTRON6. The revised MTx+ is tested at 25 Gbps and the eye-diagram shows a mask margin of 22 %.

12. Incorporating Robots into Human Law - An Analysis of Robot Prototyping in Ridley Scott’s Blade Runner and Alex Proyas’ I, Robot. [2020]

  • Katarzyna Ginszt
  • New Horizons in English Studies, Vol 5, Iss 1, Pp 172-185 (2020)
Subjects
science fiction prototyping, robot ethics, robot rights, law, ai, and Language and Literature
Abstract
Science fiction narratives have not only influenced the way the majority of people imagine the future, but they have also shaped the general expectations for the technological development. This phenomenon has been called “science fiction prototyping” by Brian David Johnson. The prototype of a robot is created by science fiction works. Robots as artificially created entities are often presented as potential “members” of future society. Therefore, their legal status in imaginary reality is worth considering. The analysis of Blade Runner (1982) by Ridley Scott and I, Robot (2004) by Alex Proyas juxtaposes features that, according to the legal tradition, are most often attributed to moral subjects of legal protection with human-like features of robots. The interdisciplinary approach adopted in this study involves applying legal reasoning to the study of science fiction.

13. Evaluation of a rapid prototyping application for stomas [2020]

  • Jose Manuel Sierra, Jose Ignacio Rodríguez, Marta María Villazon, Jose Luis Cortizo, and Maria del Rocio Fernandez
  • Rapid Prototyping Journal, 2020, Vol. 26, Issue 9, pp. 1525-1533.

14. Prototyping of Open Source NB-IoT Network [2020]

  • Chen, Chieh-Chun, Cheng, Ray-Guang, Ho, Chung-Yin, Kanj, Matthieu, Mongazon-Cazavet, Bruno, and Nikaein, Navid
Subjects
Computer Science - Networking and Internet Architecture
Abstract
Narrowband Internet-of-Things (NB-IoT) is one of the major access technologies proposed to support massive machine type communications (mMTC) services for the 5th generation (5G) mobile networks. Many emerging services and networking paradigms are expected to be developed on top of NB-IoT networks. This paper summarizes the steps required to build up an open source narrowband Internet-of-Things (NB-IoT) network. This work is a joint research and development (R&D) result from industry and academic collaboration. The open source NB-IoT enhanced Node B (eNB) is jointly developed by B-COM and NTUST based on the well-known OpenAirInterfaceTM (OAI) open source Long-Term Evolution (LTE) eNB developed by EURECOM. The NB-IoT eNB is successfully connected to an evolved packet core (EPC) developed by Nokia Bell Lab. We demonstrate how to use commercial off-the-shelf (COTS) NB-IoT module to forward its sensing data to the Internet via the open source NB-IoT network.

15. Levitation Simulator: Prototyping Ultrasonic Levitation Interfaces in Virtual Reality [2020]

  • Paneva, Viktorija, Bachynskyi, Myroslav, and Müller, Jörg
  • Proceedings of the 2020 CHI Conference on Human Factors in Computing Systems (2020)
Subjects
Computer Science - Human-Computer Interaction
Abstract
We present the Levitation Simulator, a system that enables researchers and designers to iteratively develop and prototype levitation interface ideas in Virtual Reality. This includes user tests and formal experiments. We derive a model of the movement of a levitating particle in such an interface. Based on this, we develop an interactive simulation of the levitation interface in VR, which exhibits the dynamical properties of the real interface. The results of a Fitts' Law pointing study show that the Levitation Simulator enables performance, comparable to the real prototype. We developed the first two interactive games, dedicated for levitation interfaces: LeviShooter and BeadBounce, in the Levitation Simulator, and then implemented them on the real interface. Our results indicate that participants experienced similar levels of user engagement when playing the games, in the two environments. We share our Levitation Simulator as Open Source, thereby democratizing levitation research, without the need for a levitation apparatus.
Comment: 12 pages, 14 figures, CHI'20

16. Dar luogo a ciò che non ha luogo: utopia e prototyping [2019]

  • Rispoli, Ramon and Lluch, Ester Jordana
  • Rivista di esteticaOpenAIRE.
Subjects
design, utopia, alteration, prototyping, progetto, and alterazione
Abstract
The purpose of this paper is to re-explore the relationship between utopia and architecture, trying first and foremost to challenge the way utopia has been conceived by architectural thought: i.e., as the prefiguration of a future seen as an ‘otherness’ distinct from the present, as far as the totality of its spatial, social, and political dimensions are concerned. Such vision – as we will argue – turns out to be deeply linked to a design logic of ‘projection’ and ‘prescription’; this, however, is not the only possible logic of design. Through a reflection upon some contemporary architectural practices, we will try to highlight a new horizon for design action, in which even utopia abandons its traditional ‘projective’ role and takes on a new meaning: rather than being the non-place of a possible future, utopia stands for what doesn’t have place in the present but can emerge from its alteration. Such notion of utopia as a form of ‘situated critique’, in a concrete space and time, helps to dig more deeply into the political potential of many contemporary forms of architectural and urban design.
Il proposito di questo contributo è tornare a esplorare la relazione tra utopia e architettura, cercando innanzitutto di mettere in questione il modo in cui l’utopia è stata concepita tradizionalmente nel pensiero architettonico: vale a dire, come la prefigurazione di un futuro concepito come alterità rispetto al presente, nella totalità delle sue dimensioni spaziali, sociali e politiche. Tale visione - come si cercherà di illustrare - è intimamente legata a una certa logica “proiettiva” e “prescrittiva” che, tuttavia, non è l’unica logica possibile del progetto. Attraverso una riflessione su alcuni modi del progetto di architettura contemporaneo, si cercherà infatti di mettere in evidenza una nuova logica progettuale, in cui anche l’utopia abbandona il suo carattere proiettivo tradizionale per acquisire un nuovo senso: non più il non-luogo di un futuro possibile, bensì ciò che non ha luogo nel presente e che può tuttavia emergere dalla sua alterazione. Questa nozione di utopia come “critica situata” concretamente in uno spazio e in un tempo aiuta a comprendere più in profondità il potenziale politico di molte delle forme contemporanee di progetto architettonico e urbano.

17. Efficient Computation of Graph Overlaps for Rule Composition: Theory and Z3 Prototyping [2020]

  • Behr, Nicolas, Heckel, Reiko, and Saadat, Maryam Ghaffari
  • EPTCS 330, 2020, pp. 126-144
Subjects
Computer Science - Logic in Computer Science
Abstract
Graph transformation theory relies upon the composition of rules to express the effects of sequences of rules. In practice, graphs are often subject to constraints, ruling out many candidates for composed rules. Focusing on the case of sesqui-pushout (SqPO) semantics, we develop a number of alternative strategies for computing compositions, each theoretically and with an implementation via the Python API of the Z3 theorem prover. The strategies comprise a straightforward generate-and-test strategy based on forbidden graph patterns, a variant with a more implicit logical encoding of the negative constraints, and a modular strategy, where the patterns are decomposed as forbidden relation patterns. For a toy model of polymer formation in organic chemistry, we compare the performance of the three strategies in terms of execution times and memory consumption.
Comment: In Proceedings GCM 2020, arXiv:2012.01181

18. LiftTiles: Constructive Building Blocks for Prototyping Room-scale Shape-changing Interfaces [2020]

  • Suzuki, Ryo, Nakayama, Ryosuke, Liu, Dan, Kakehi, Yasuaki, Gross, Mark D., and Leithinger, Daniel
Subjects
Computer Science - Human-Computer Interaction and Computer Science - Robotics
Abstract
Large-scale shape-changing interfaces have great potential, but creating such systems requires substantial time, cost, space, and efforts, which hinders the research community to explore interactions beyond the scale of human hands. We introduce modular inflatable actuators as building blocks for prototyping room-scale shape-changing interfaces. Each actuator can change its height from 15cm to 150cm, actuated and controlled by air pressure. Each unit is low-cost (8 USD), lightweight (10 kg), compact (15 cm), and robust, making it well-suited for prototyping room-scale shape transformations. Moreover, our modular and reconfigurable design allows researchers and designers to quickly construct different geometries and to explore various applications. This paper contributes to the design and implementation of highly extendable inflatable actuators, and demonstrates a range of scenarios that can leverage this modular building block.
Comment: TEI 2020

19. Why Map Literature? Geospatial Prototyping for Literary Studies and Digital Humanities [2020]

  • Randa El Khatib and Marcel Schaeben
  • Digital Studies, Vol 10, Iss 1 (2020)
Subjects
literary mapping, geospatial prototyping, scholarly communication, 'paradise lost', History of scholarship and learning. The humanities, AZ20-999, Electronic computers. Computer science, and QA75.5-76.95
Abstract
By focusing on the process of building 'A Map of Paradise Lost'—a geospatial humanities text-to-map project that visualizes the locatable places in John Milton’s 'Paradise Lost'— this paper addresses the question “why map literature?” and demonstrates how the process of research prototyping is in itself a form of knowledge production. Through a series of 'prototyping moments', we address how the different steps involved in building a geospatial humanities project can produce new knowledge about the fields it relates to: literary studies and digital humanities. The prototyping moments make arguments that advance our understanding of Milton’s 'Paradise Lost', approaches to data visualization for cartographic comparison in and beyond DH, and models for interdisciplinary collaboration. Résumé En se concentrant sur le processus de construction 'd’une Carte du Paradis Perdu' – un projet d’humanités géospatiales qui visualise, dans une carte à partir du texte, les places localisables dans le 'Paradis Perdu' de John Milton – cet article aborde la question «pourquoi une littérature cartographique?» et démontre comment le processus de prototypage de recherche est en soi une forme de production de connaissances. A travers une série de 'moments de prototypage', nous abordons comment les différentes étapes impliquées dans la construction d’un projet d’humanités géospatiales peuvent produire de nouvelles connaissances concernant les domaines relatifs à ce sujet: études littéraires et humanités digitales. Les moments de prototypage présentent des arguments qui améliorent notre compréhension du 'Paradis Perdu' de Milton, des approches de visualisation des données pour une comparaison cartographique «à l’intérieur» et «au-delà» des humanités digitales ainsi que des modèles pour une collaboration interdisciplinaire. Mots-clés: cartographie littéraire; prototypage géospatial; communication savante; 'Paradis Perdu'

20. Concept evaluation in new product development : A set-based method utilizing rapid prototyping and physical modelling [2020]

  • Jørgen Blindheim, Christer W. Elverum, Torgeir Welo, and Martin Steinert
  • Journal of Engineering, Design and Technology, 2020, Vol. 18, Issue 5, pp. 1139-1151.

Catalog

Books, media, physical & digital resources
See catalog results

Guides

Course- and topic-based guides to collections, tools, and services.
Search ""Prototyping"" in all guide pages