articles+ search results

2,846 articles+ results

1 - 100
View results as:
Number of results to display per page

1. 3D printing of bending-dominated soft lattices: numerical and experimental assessment [2022]

2. Qualifying water-based electrode dispersions for the inkjet printing process: a requirements analysis [2022]

3. DIRECTED ENERGY DEPOSITION MOVES OUTSIDE THE BOX: Metal additive manufacturing has steadily progressed over the past decade, with today's directed energy deposition processes enabling rapid builds of large structures in near-net shape-and with minimal machining required to achieve fi nal dimensions [2022]

4. 3D-printed reflector antenna and metallization in Ka-band [2022]

5. Investigative prototyping a tissue P system for solving distributed task assignment problem in heterogeneous wireless sensor network [2022]

6. Design, additive manufacturing and component testing of pneumatic rotary vane actuators for lightweight robots [2022]

7. Development of an authentic concept of engineering activities based on product redesign [2022]

8. SymEx-VP: An open source virtual prototype for OS-agnostic concolic testing of IoT firmware[black small square] [2022]

9. Prototyping an IoT-based system for monitoring building indoor environment [2022]

10. A review of Industry 4.0 and additive manufacturing synergy [2022]

11. Effect of building orientations and heat treatments on AlSi10Mg alloy fabricated by selective laser melting: microstructure evolution, mechanical properties, fracture mechanism and corrosion behavior [2022]

12. Establishing a blockchain online travel agency with a human–computer interaction perspective [2022]

13. Research on microstructure and mechanical properties of hybrid plasma arc and micro-rolling additive manufacturing of Inconel 718 superalloy [2022]

14. Effects of the process parameters on the formability and properties of Ni54(at.%) Ti alloys prepared by laser powder bed fusion [2022]

15. Experimental assessment of thermal gradients and layout effects on the mechanical performance of components manufactured by fused deposition modeling [2022]

16. 4D-textiles: development of bistable textile structures using rapid prototyping and the bionic approach [2022]

17. Estimation of lift characteristics of a subscale fighter using low-cost experimental methods [2022]

18. In-situ adaptive thermal simulation method for predicting and avoiding hotspots in material extrusion processes [2022]

19. Correlating structural complexity and acoustic noise performance of electric motors [2022]

20. Laser additive manufacturing of bulk and powder ceramic materials: mathematical modeling with experimental correlations [2022]

21. Study on the impact behavior of arch micro-strut (ARCH) lattice structure by selective laser melting (SLM) [2022]

22. Performance characterisation and printing parameter modelling of selective laser melting printed capillary wicks [2022]

23. Physical, thermal and tensile behaviour of 3D printed kenaf/PLA to suggest its usability for ankle–foot orthosis – a preliminary study [2022]

24. Specific energy absorption during compression testing of ABS and FPU parts fabricated using LCD-SLA based 3D printer [2022]

25. Leadership development through experimentation: a theoretical framework and empirical test [2022]

26. Multimaterial powder bed fusion techniques [2022]

27. Open-source syringe extrusion head for shear-thinning materials 3D printing [2022]

28. Evaluation of polymeric 3D printed adhesively bonded joints: effect of joint morphology and mechanical interlocking [2022]

29. Computational design strategy to improve RF heating uniformity [2022]

30. 6DOF nonlinear control loading system for a large transport aircraft simulator [2022]

31. Distribution and evolution of thermal stress in laser powder bed fusion: conduction mode versus keyhole mode [2022]

32. An individualized and adaptive game-based therapy for cerebral visual impairment: Design, development, and evaluation [2022]

33. The potential for emerging technologies to support self-regulation in children with ADHD: A literature review [2022]

34. The evolution of a toolkit for smart-thing design with children through action research [2022]

35. Systematic design of nonlinear ADRC for laser seeker system with FPGA-based rapid prototyping validation [2022]

36. Optimisation of single contour strategy in selective laser melting of Ti-6Al-4V lattices [2022]

37. Development of novel customized pressure distribution surface for reduction of pressure ulcers using additive manufacturing technology [2022]

38. Characterization of power demand and energy consumption for fused filament fabrication using CFR-PEEK [2022]

39. Relative density prediction of additively manufactured Inconel 718: a study on genetic algorithm optimized neural network models [2022]

40. Effects of various processing parameters on the mechanical properties and dimensional accuracies of Prosopis chilensis/PES composites produced by SLS [2022]

41. Effect of heparin drug loading on biodegradable polycaprolactone–iron pentacarbonyl powder blend stents fabricated by solvent cast 3D printing [2022]

42. Accuracy of 3D printed dental casts for protective dental splints during general anesthesia [2022]

43. Optimization of FDM 3D printing parameters for high strength PEEK using the Taguchi method and experimental validation [2022]

44. Surface modification of prototypes in fused deposition modelling using lapping process [2022]

45. A critical review of 3D printing and digital manufacturing in construction engineering [2022]

46. High-cycle fatigue properties of curved-surface AlSi10Mg parts fabricated by powder bed fusion additive manufacturing [2022]

47. Fatigue life optimization for 17-4Ph steel produced by selective laser melting [2022]

48. Evolution of temperature and residual stress behavior in selective laser melting of 316L stainless steel across a cooling channel [2022]

49. Additive manufacturing with fibre-reinforcement – design guidelines and investigation into the influence of infill patterns [2022]

50. An experimental and numerical investigation on mechanical properties of 3D printed continuous glass tow preg-reinforced composites [2022]

51. Selection for additive manufacturing using hybrid MCDM technique considering sustainable concepts [2022]

52. Electrothermal response optimization of nozzle structure for multi-material rapid prototyping based on fuzzy adaptive control [2022]

53. USVs-Sim: A general simulation platform for unmanned surface vessels autonomous learning [2022]

54. This title is not available for guests. Log in to see the title and access the article.

55. A case study on a flexible floor plan design for South Korean apartments using two types of margins [2022]

56. Proposal of design rules for improving the accuracy of selective laser melting (SLM) manufacturing using benchmarks parts [2022]

57. Sustainable design guidelines for additive manufacturing applications [2022]

58. Densification behaviour of pure copper processed through cold pressing and binder jetting under different atmospheres [2022]

59. Investigation of suitable material and adhesion promoter combinations for fused filament fabrication on flexible silicone build plates [2022]

60. Fused filament fabrication of nylon 6/66 copolymer: parametric study comparing full factorial and Taguchi design of experiments [2022]

61. A bibliometric analysis of research in design for additive manufacturing [2022]

62. Validation of design and materials for additive manufacturing of endocavitary mechanical distractor [2022]

63. Development and experimental study of an automated laser-foil-printing additive manufacturing system [2022]

64. Feedforward control to suppress the leading edge bulge in photopolymerization-based additive manufacturing [2022]

65. On the build orientation effect in as-printed and as-sintered bending properties of 17-4PH alloy fabricated by metal fused filament fabrication [2022]

66. Overlapping optimization of hybrid deposited and micro-rolling additive manufacturing [2022]

67. Transient thermal finite-element analysis of fused filament fabrication process [2022]

68. A physical investigation of dimensional and mechanical characteristics of 3D printed nut and bolt for industrial applications [2022]

69. Study of anisotropy through microscopy, internal friction and electrical resistivity measurements of Ti-6Al-4V samples fabricated by selective laser melting [2022]

70. Digital Transformation in Metrology: Building a Metrological Service Ecosystem [2022]

71. Virtual and Augmented Reality in Manufacturing Companies in Slovakia [2022]

72. Fatigue life assessment of polyamide 12 processed by selective laser sintering. Damage modelling according to fracture mechanics [2021]

73. Multi-jet ice 3D printing [2021]

74. The role of robotics in additive manufacturing: review of the AM processes and introduction of an intelligent system [2021]

75. Two improved scanning path planning algorithms and a 3D printing control system with circular motion controller [2021]

76. Impact of cutting fluid on hybrid manufacturing of AISI H13 tool steel [2021]

77. Erosion characteristics on surface texture of additively manufactured AlSi10Mg alloy in SiO2 quartz added slurry environment [2021]

78. Development of a patient-specific immobilisation facemask for radiation therapy using additive manufacturing, pressure sensors and topology optimisation [2021]

79. Fused filament fabrication of continuous optic fiber reinforced polylactic acid composites [2021]

80. Quality Prediction of Fused Deposition Molding Parts Based on Improved Deep Belief Network [2021]

81. Processing and properties of PLA/Mg filaments for 3D printing of scaffolds for biomedical applications [2021]

82. Design and prototyping of GSM-bluetooth based solar energy remote monitoring system [2021]

83. Toy user interface design--Tools for Child--Computer Interaction [2021]

84. Improved fault detection and control allocation for hypersonic re-entry vehicle subject to intermittent fault and disturbance [2021]

85. Numerical modeling and experimental verification of the composite material of PA12/HA with parameterized random distribution in selective laser sintering [2021]

86. Multi-physics properties of thermoplastic polyurethane at various fused filament fabrication parameters [2021]

87. Slicing strategy and process of laser direct metal deposition (DMD) of the inclined thin-walled part under open-loop control [2021]

88. Data fusion analysis in the powder-bed fusion AM process monitoring by Dempster-Shafer evidence theory [2021]

89. Investigations of personalized and sustainable approach of oral drug delivery systems through additive manufacturing [2021]

90. Ni-based alloy 713C manufactured by a selective laser melting method: characteristics of the microstructure [2021]

91. Simultaneous extraction of profile and surface roughness of 3D SLM components using fringe projection method [2021]

92. Animal orthosis fabrication with additive manufacturing – a case study of custom orthosis for chicken [2021]

93. Correlation between pre- and post-treatments of additively manufactured 316L parts and the resulting low cycle fatigue behavior [2021]

94. Use of 4D-printing and shape memory alloys to fabricate customized metal jewels with functional properties [2021]

95. Volumetric adaptive slicing of manifold mesh for rapid prototyping based on relative volume error [2021]

96. The mechanism of process parameters influencing the AlSi10Mg side surface quality fabricated via laser powder bed fusion [2021]

97. Predicting the effect of build orientation and process temperatures on the performance of parts made by fused filament fabrication [2021]

98. Preparation and application of water-based nano-silver conductive ink in paper-based 3D printing [2021]

99. Feature-driven systems engineering procedure for standardized product-line development [2021]

100. Microstructure and mechanical properties of hierarchical porous parts of Ti-6Al-4V alloy obtained by powder bed fusion techniques [2021]

Catalog

Books, media, physical & digital resources
See catalog results

Guides

Course- and topic-based guides to collections, tools, and services.
Search ""Prototyping"" in all guide pages