articles+ search results

LoRa technology has gained popularity as one of the most widely used standards for device interconnection due to its ability to cover long distances and energy efficiency, making it a suitable choice for various Internet of Things (IoT) monitoring and control applications. In this sense, this work presents the development of a visual support tool for creating IoT devices with LoRa and LoRaWAN connectivity. This work significantly advances the state of the art in LoRa technology by introducing a novel visual support tool tailored for creating IoT devices with LoRa and LoRaWAN connectivity. By simplifying the development process and offering compatibility with multiple hardware solutions, this research not only facilitates the integration of LoRaWAN technology within educational settings but also paves the way for rapid prototyping of IoT nodes. The incorporation of block programming for LoRa and LoRaWAN using the Arduinoblocks framework as a graphical environment enhances the capabilities of the tool, positioning it as a comprehensive solution for efficient firmware generation. In addition to the visual tool for firmware generation, multiple compatible hardware solutions enable easy, economical, and stable development, offering a comprehensive hardware and software solution. The hardware proposal is based on an ESP32 microcontroller, known for its power and low cost, in conjunction with an RFM9x module that is based on SX127x LoRa transceivers. Finally, three successfully tested use cases and a discussion are presented.

The transfer from batch to flow chemistry is often based on commercial microfluidic equipment, such as costly complete reactor systems, which cannot be easily tailored to specific requirements of technologies such as DNA-encoded library technology (DELT), in particular for increasingly important photochemical reactions. Customized photoreactor concepts using rapid prototyping technology offer a modular, flexible, and affordable design that allows for adaptation to various applications. In order to validate the prototype reactors, a photochemical pinacol coupling reaction at 368 nm was conducted to demonstrate the transfer from batch to flow chemistry. The conversion rates were optimized by adapting the design parameters of the microfluidic flow photoreactor module. Subsequently, the photoreactor module has been extended to an application with DNA-tagged substrates by switching to LEDs with a wavelength of 454 nm. The successful recovery of DNA confirmed the feasibility of the modular-designed flow photo reactor. This collaborative approach holds enormous potential to drive the development of DELT and flow equipment design.
Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.
(Copyright © 2023 Dinter, Willems, Nissalk, Hastürk, Brunschweiger and Kockmann.)

Models of urea kinetics facilitate a mechanistic understanding of urea transfer and provide a tool for optimizing dialysis efficacy. Dual-compartment models have largely replaced single-compartment models as they are able to accommodate the urea rebound on the cessation of dialysis. Modeling the kinetics of urea and other molecular species is frequently regarded as a rarefied academic exercise with little relevance at the bedside. We demonstrate the utility of System Dynamics in creating multi-compartment models of urea kinetics by developing a dual-compartment model that is efficient, intuitive, and widely accessible to a range of practitioners. Notwithstanding its simplicity, we show that the System Dynamics model compares favorably with the performance of a more complex volume-average model in terms of calibration to clinical data and parameter estimation. Its intuitive nature, ease of development/modification, and excellent performance with real-world data may make System Dynamics an invaluable tool in widening the accessibility of hemodialysis modeling.
(© 2023. The Author(s).)

Optical sensing offers several advantages owing to its non-invasiveness and high sensitivity. The miniaturization of optical sensors will mitigate spatial and weight constraints, expanding their applications and extending the principal advantages of optical sensing to different fields, such as healthcare, Internet of Things, artificial intelligence, and other aspects of society. In this study, we present the development of a miniature optical sensor for monitoring thrombi in extracorporeal membrane oxygenation (ECMO). The sensor, based on a complementary metal-oxide semiconductor integrated circuit (CMOS-IC), also serves as a photodiode, amplifier, and light-emitting diode (LED)-mounting substrate. It is sized 3.8 × 4.8 × 0.75 mm 3 and provides reflectance spectroscopy at three wavelengths. Based on semiconductor and microelectromechanical system (MEMS) processes, the design of the sensor achieves ultra-compact millimeter size, customizability, prototyping, and scalability for mass production, facilitating the development of miniature optical sensors for a variety of applications.

Since temperature and its spatial, and temporal variations affect a wide range of physical properties of material systems, they can be used to create reconfigurable spatial structures of various types in physical and biological objects. This paper presents an experimental optical setup for creating tunable two-dimensional temperature patterns on a micrometer scale. As an example of its practical application, we have produced temperature-induced magnetization landscapes in ferrimagnetic yttrium iron garnet films and investigated them using micro-focused Brillouin light scattering spectroscopy. It is shown that, due to the temperature dependence of the magnon spectrum, spatial temperature distributions can be visualized even for microscale thermal patterns.
(© 2023 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).)

Animals, Antivenins therapeutic use, Antibodies, Monoclonal therapeutic use, Snake Bites diagnosis, Snake Bites drug therapy, Crotalid Venoms therapeutic use, and Bothrops

Background: Brazil is home to a multitude of venomous snakes; perhaps the most medically relevant of which belong to the Bothrops genus. Bothrops spp. are responsible for roughly 70% of all snakebites in Brazil, and envenomings caused by their bites can be treated with three types of antivenom: bothropic antivenom, bothro-lachetic antivenom, and bothro-crotalic antivenom. The choice to administer antivenom depends on the severity of the envenoming, while the choice of antivenom depends on availability and on how certain the treating physician is that the patient was bitten by a bothropic snake. The diagnosis of a bothropic envenoming can be made based on expert identification of the dead snake or a photo thereof or based on a syndromic approach wherein the clinician examines the patient for characteristic manifestations of envenoming. This approach can be very effective but requires staff that has been trained in clinical snakebite management, which, unfortunately, far from all relevant staff has.
Results: In this article, we describe a prototype of the first lateral flow assay (LFA) capable of detecting venoms from Brazilian Bothrops spp. The monoclonal antibodies for the assay were generated using hybridoma technology and screened in sandwich enzyme-linked immunosorbent assays (ELISAs) to identify Bothrops spp.-specific antibody sandwich pairs. The prototype LFA is able to detect venom from several Bothrops spp. The LFA has a limit of detection (LoD) of 9.5 ng/mL in urine, when read with a commercial reader, and a visual LoD of approximately 25 ng/mL.
Significance: The work presented here serves as a proof of concept for a genus-specific venom detection kit that could support physicians in diagnosing Bothrops envenomings. Although further optimisation and testing is needed before the LFA can find clinical use, such a device could aid in decentralising antivenoms in the Brazilian Amazon and help ensure optimal snakebite management for even more victims of this highly neglected disease.
Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Cecilie Knudsen, Jonas A. Jürgensen, Søren H. Dam, Aleksander M. Haack, Rasmus U. W. Friis, and Andreas H. Laustsen are co-founders of VenomAid Diagnostics A/S. Jonas A. Jürgensen, Pelle D. Knudsen, and Georgina M. Ross are employed by VenomAid Diagnostics A/S. Cecilie Knudsen is an industrial PhD student at the Technical University of Denmark. Her PhD is co-sponsored by Innovation Fund Denmark and BioPorto Diagnostics A/S. Cecilie Knudsen, Jonas A. Jürgensen, Søren H. Dam, Aleksander M. Haack, Rasmus U. W. Friis, and Andreas H. Laustsen have been designated as inventors on a patent application related to the work presented here.
(Copyright © 2023 The Author(s). Published by Elsevier B.V. All rights reserved.)

Humans, Employment, and User-Centered Design

This paper presents elements of user-centered design and prototyping of a serious game. Produced within the framework of the SG-HANDI project, the serious game aims to raise awareness about integration, prevention of professional displacement and job retention of people with disabilities. This serious game is developed on an interactive RFID tabletop with tangible objects. It is intended to be used in a collective context involving one or more facilitators specialized in employment and disability, as well as the company's stakeholders to be made aware of the issue.

Lab-On-A-Chip Devices, Microfluidics, and Nucleic Acid Amplification Techniques methods

In this work, we demonstrate an inexpensive method of prototyping microfluidics using a desktop injection molding machine. A centrifugal microfluidic device with a novel central filling mechanism was developed to demonstrate the technique. We overcame the limitations of desktop machines in replicating microfluidic features by variotherm heating and cooling the mold between 50 °C and 110 °C within two minutes. Variotherm heating enabled good replication of microfeatures, with a coefficient of variation averaging only 3.6% attained for the measured widths of 100 μm wide molded channels. Using this methodology, we produced functional polystyrene centrifugal microfluidic chips, capable of aliquoting fluids into 5.0 μL reaction chambers with 97.5% accuracy. We performed allele-specific loop-mediated isothermal amplification (AS-LAMP) reactions for genotyping CYP2C19 alleles on these chips. Readouts were generated using optical pH sensors integrated onto chips, by drop-casting sensor precursor solutions into reaction chambers before final chip assembly. Positive reactions could be discerned by decreases in pH sensor fluorescence, thresholded against negative control reactions lacking the primers for nucleic acid amplification and with time-to-results averaging 38 minutes. Variotherm desktop injection molding can enable researchers to prototype microfluidic devices more cost-effectively, in an iterative fashion, due to reduced costs of smaller, in-house molds. Designs prototyped this way can be directly translated to mass production, enhancing their commercialization potential and positive impacts.

The increasing demand for seafood is responsible for many environmental impacts, especially caused by aquaculture. Shrimp accounts for a substantial part of seafood production and therefore also for negative effects associated with it. This work aimed to develop a mushroom-based shrimp analogue with a texture similar to shrimp using the fruiting bodies of pink oyster mushroom ( Pleurotus djamor ) and lion's mane ( Hericium erinaceus ). Three flushes of pink oyster mushrooms and a first flush of lion's mane mushroom were analysed regarding their nutritional composition and whether they are suitable shrimp alternatives. The two mushrooms are rich in proteins (∼32% and ∼26% w/w for the first flush of pink oyster and lion's mane, respectively). The protein content of pink oyster mushroom decreased and the dietary fibre content increased across the different flushes. The antioxidants in the mushrooms were extracted using different methods, whereby aqueous extracts mostly excelled in terms of antioxidant activity. Hydrolysis confirmed the presence of conjugated p -coumaric acid in both mushrooms and possibly conjugated caffeic acid in pink oyster. Texture analysis results of the prototypes were close to the values of fried shrimp. However, although the sensory qualities of the final prototypes were perceived as similar to shrimp, further improvements in the recipe are necessary to make the prototypes indistinguishable from shrimp.
Competing Interests: None.
(© 2023 The Author(s).)

The flapping-wing technology has emerged recently in the application of unmanned aerial robotics for autonomous flight, control, inspection, monitoring, and manipulation. Despite the advances in applications and outdoor manual flights (open-loop control), closed-loop control is yet to be investigated. This work presents a nonlinear optimal closed-loop control design via the state-dependent Riccati equation (SDRE) for a flapping-wing flying robot (FWFR). Considering that the dynamic modeling of the flapping-wing robot is complex, a proper model for the implementation of nonlinear control methods is demanded. This work proposes an alternative approach to deliver an equivalent dynamic for the translation of the system and a simplified model for orientation, to find equivalent dynamics for the whole system. The objective is to see the effect of flapping (periodic oscillation) on behavior through a simple model in simulation. Then the SDRE controller is applied to the derived model and implemented in simulations and experiments. The robot bird is a 1.6 m wingspan flapping-wing system (six-degree-of-freedom robot) with four actuators, three in the tail, and one as the flapping input. The underactuated system has been controlled successfully in position and orientation. The control loop is closed by the motion capture system in the indoor test bed where the experiments of flight have been successfully done.
Competing Interests: Declaration of competing interest The authors declare that there is no conflict of interest for this paper.
(Copyright © 2023 The Author(s). Published by Elsevier Ltd.. All rights reserved.)