articles+ search results

48 articles+ results

1 - 48
View results as:
Number of results to display per page

1. A digital design methodology for surgical planning and fabrication of customized mandible implants [2017]

  • Emad Abouel Nasr, Abdurahman Mushabab Al-Ahmari, Khaja Moiduddin, Mohammed Al Kindi, and Ali K. Kamrani
  • Rapid Prototyping Journal, 2017, Vol. 23, Issue 1, pp. 101-109.

2. Multi-objective optimization of dimensional accuracy, surface roughness and hardness of hybrid investment cast components [2017]

  • Parlad Kumar Garg, Rupinder Singh, and IPS Ahuja
  • Rapid Prototyping Journal, 2017, Vol. 23, Issue 5, pp. 845-857.

3. Plate auto-level system for fused deposition modelling (FDM) 3D printers [2017]

  • Enrique Soriano Heras, Fernando Blaya Haro, José María de Agustín del Burgo, and Manuel Enrique Islán Marcos
  • Rapid Prototyping Journal, 2017, Vol. 23, Issue 2, pp. 401-413.

4. Direct digital manufacturing of an accelerator pedal for a Formula Student racing car [2016]

  • Jorge Gonzalez Prada, Aitor Cazon, Josu Carda, and Ander Aseguinolaza
  • Rapid Prototyping Journal, 2016, Vol. 22, Issue 2, pp. 311-321.

5. Low-cost closed-loop control of a 3D printer gantry [2015]

  • author author
  • Rapid Prototyping Journal, 2015, Vol. 21, Issue 5, pp. 482-490.

6. Process capability analysis of fused deposition modelling for plastic components [2014]

  • Singh Rupinder
  • Rapid Prototyping Journal, 2014, Vol. 20, Issue 1, pp. 69-76.

7. Thickening of surfaces for direct additive manufacturing fabrication [2012]

  • Bordoni Manlio and Boschetto Alberto
  • Rapid Prototyping Journal, 2012, Vol. 18, Issue 4, pp. 308-318.

8. A dynamic model for nozzle clog monitoring in fused deposition modelling [2017]

  • Yedige Tlegenov, Yoke San Wong, and Geok Soon Hong
  • Rapid Prototyping Journal, 2017, Vol. 23, Issue 2, pp. 391-400.

9. 3D printing of generative art using the assembly and deformation of direction-specified parts [2016]

  • Yaususi Kanada
  • Rapid Prototyping Journal, 2016, Vol. 22, Issue 4, pp. 636-644.

10. Experimental investigation of FDM process for improvement of mechanical properties and production cost [2014]

  • Durgun Ismail and Ertan Rukiye
  • Rapid Prototyping Journal, 2014, Vol. 20, Issue 3, pp. 228-235.

11. Mechanical properties of composite parts manufactured in FDM technology [2018]

  • Filip Górski, Wiesław Kuczko, Radosław Wichniarek, and Adam Hamrol
  • Rapid Prototyping Journal, 2018, Vol. 24, Issue 8, pp. 1281-1287.

12. Experimental investigations on natural fiber embedded additive manufacturing-based biodegradable structures for biomedical applications [2018]

  • Amarveer Singh Mangat, Sunpreet Singh, Munish Gupta, and Ravinder Sharma
  • Rapid Prototyping Journal, 2018, Vol. 24, Issue 7, pp. 1221-1234.

13. The influence of the 3D-printing technology on the physical and mechanical properties of polyphenylene sulfone [2018]

  • Azamat Ladinovich Slonov, Azamat Askerovich Khashirov, Azamat Aslanovich Zhansitov, Elena Viktorovna Rzhevskaya, and Svetlana Yuryevna Khashirova
  • Rapid Prototyping Journal, 2018, Vol. 24, Issue 7, pp. 1124-1130.

14. Fully resolved numerical simulations of fused deposition modeling. Part II – solidification, residual stresses and modeling of the nozzle [2018]

  • Huanxiong Xia, Jiacai Lu, and Gretar Tryggvason
  • Rapid Prototyping Journal, 2018, Vol. 24, Issue 6, pp. 973-987.

15. Printing with mechanically interlocked extrudates using a custom bi-extruder for fused deposition modelling [2018]

  • Mohammad Abu Hasan Khondoker, Asad Asad, and Dan Sameoto
  • Rapid Prototyping Journal, 2018, Vol. 24, Issue 6, pp. 921-934.

16. Investigation of ABS-rice straw composite feedstock filament for FDM [2018]

  • Mohammed Ali Osman and Mostafa R.A. Atia
  • Rapid Prototyping Journal, 2018, Vol. 24, Issue 6, pp. 1067-1075.

17. Design and 3D printing customized guides for orthopaedic surgery – lessons learned [2018]

  • Diana Popescu, Dan Laptoiu, Rodica Marinescu, and Iozefina Botezatu
  • Rapid Prototyping Journal, 2018, Vol. 24, Issue 5, pp. 901-913.

18. Exposures during industrial 3-D printing and post-processing tasks [2018]

  • Sonette Du Preez, Alyson Johnson, Ryan F. LeBouf, Stephanus J.L. Linde, Aleksandr B. Stefaniak, and Johan Du Plessis
  • Rapid Prototyping Journal, 2018, Vol. 24, Issue 5, pp. 865-871.

19. Additive manufacturing of shape memory polymers: effects of print orientation and infill percentage on mechanical properties [2018]

  • Jorge Villacres, David Nobes, and Cagri Ayranci
  • Rapid Prototyping Journal, 2018, Vol. 24, Issue 4, pp. 744-751.

20. Abrasive flow finishing of FDM printed parts using a sustainable media [2018]

  • Harlal S. Mali, Bhargav Prajwal, Divyanshu Gupta, and Jai Kishan
  • Rapid Prototyping Journal, 2018, Vol. 24, Issue 3, pp. 593-606.

21. Investigation of influence of heat treatment on mechanical strength of FDM printed 3D objects [2018]

  • Wonjin Jo, O-Chang Kwon, and Myoung-Woon Moon
  • Rapid Prototyping Journal, 2018, Vol. 24, Issue 3, pp. 637-644.

22. Impact of vapor polishing on surface quality and mechanical properties of extruded ABS [2018]

  • Clayton Neff, Matthew Trapuzzano, and Nathan B. Crane
  • Rapid Prototyping Journal, 2018, Vol. 24, Issue 2, pp. 501-508.

23. Mechanical properties and water absorption of surface modified ABS 3D printed by fused deposition modelling [2018]

  • Marco Leite, André Varanda, António Relógio Ribeiro, Arlindo Silva, and Maria Fátima Vaz
  • Rapid Prototyping Journal, 2018, Vol. 24, Issue 1, pp. 195-203.

24. The effect of process parameters in fused deposition modelling on bonding degree and mechanical properties [2018]

  • Hongbin Li, Taiyong Wang, Jian Sun, and Zhiqiang Yu
  • Rapid Prototyping Journal, 2018, Vol. 24, Issue 1, pp. 80-92.

25. Enhancing the sustainability of chemical vapour polishing of additive manufactured ABS parts using a vacuum chamber [2017]

  • Sergio Pietanza, Donato Sorgente, and Gianluca Percoco
  • Rapid Prototyping Journal, 2017, Vol. 23, Issue 6, pp. 1043-1050.

26. Effect of cold vapour treatment on geometric accuracy of fused deposition modelling parts [2017]

  • Ashu Garg, Anirban Bhattacharya, and Ajay Batish
  • Rapid Prototyping Journal, 2017, Vol. 23, Issue 6, pp. 1226-1236.

27. Edge quality in fused deposition modeling: I. Definition and analysis [2017]

  • Antonio Armillotta and Marco Cavallaro
  • Rapid Prototyping Journal, 2017, Vol. 23, Issue 6, pp. 1079-1087.

28. Analysis of specimens from phase I of the 3D printing in Zero G technology demonstration mission [2017]

  • Tracie Prater, Quincy Bean, Niki Werkheiser, Richard Grguel, Ron Beshears, Terry Rolin, Tim Huff, Richard Ryan, Frank Ledbetter, and Erick Ordonez
  • Rapid Prototyping Journal, 2017, Vol. 23, Issue 6, pp. 1212-1225.

29. Bonding quality and fracture analysis of polyamide 12 parts fabricated by fused deposition modeling [2017]

  • Hao Li, Shuai Zhang, Zhiran Yi, Jie Li, Aihua Sun, Jianjun Guo, and Gaojie Xu
  • Rapid Prototyping Journal, 2017, Vol. 23, Issue 6, pp. 973-982.

30. Effect of layer thickness on irreversible thermal expansion and interlayer strength in fused deposition modeling [2017]

  • Anthony A. D’Amico, Analise Debaie, and Amy M. Peterson
  • Rapid Prototyping Journal, 2017, Vol. 23, Issue 5, pp. 943-953.

31. Local adaptive slicing [1998]

  • Tyberg Justin and Helge Bøhn Jan
  • Rapid Prototyping Journal, 1998, Vol. 4, Issue 3, pp. 118-127.

32. On the use of high viscosity polymers in the fused filament fabrication process [2017]

  • Muhammad Hussam Khaliq, Rui Gomes, Célio Fernandes, João Nóbrega, Olga Sousa Carneiro, and Luis Lima Ferrás
  • Rapid Prototyping Journal, 2017, Vol. 23, Issue 4, pp. 727-735.

33. Improvement of FDM parts’ surface quality using optimized neural networks – medical case studies [2017]

  • Ebrahim Vahabli and Sadegh Rahmati
  • Rapid Prototyping Journal, 2017, Vol. 23, Issue 4, pp. 825-842.

34. Edge quality in fused deposition modeling: II. experimental verification [2017]

  • Antonio Armillotta, Stefano Bianchi, Marco Cavallaro, and Stefania Minnella
  • Rapid Prototyping Journal, 2017, Vol. 23, Issue 4, pp. 686-695.

35. Pre and post processing techniques to improve surface characteristics of FDM parts: a state of art review and future applications [2017]

  • Jasgurpreet Singh Chohan and Rupinder Singh
  • Rapid Prototyping Journal, 2017, Vol. 23, Issue 3, pp. 495-513.

36. System and process development for coaxial extrusion in fused deposition modelling [2017]

  • Adam C. Taylor, Stephen Beirne, Gursel Alici, and Gordon G. Wallace
  • Rapid Prototyping Journal, 2017, Vol. 23, Issue 3, pp. 543-550.

37. Bond and part strength in fused deposition modeling [2017]

  • Timothy J. Coogan and David Owen Kazmer
  • Rapid Prototyping Journal, 2017, Vol. 23, Issue 2, pp. 414-422.

38. The effects of moisture and temperature on the mechanical properties of additive manufacturing components: fused deposition modeling [2016]

  • Eunseob Kim, Yong-Jun Shin, and Sung-Hoon Ahn
  • Rapid Prototyping Journal, 2016, Vol. 22, Issue 6, pp. 887-894.

39. Development of ABS based wire as feedstock filament of FDM for industrial applications [2016]

  • Rupinder Singh, Sunpreet Singh, and Karan Mankotia
  • Rapid Prototyping Journal, 2016, Vol. 22, Issue 2, pp. 300-310.

40. Investigations for melt flow index of Nylon6-Fe composite based hybrid FDM filament [2016]

  • Harish Garg and Rupinder Singh
  • Rapid Prototyping Journal, 2016, Vol. 22, Issue 2, pp. 338-343.

41. Fused deposition modelling based rapid patterns for investment casting applications: a review [2016]

  • Rapid Prototyping Journal, 2016, Vol. 22, Issue 1, pp. 123-143.

42. Fabrication of conductive paths on a fused deposition modeling substrate using inkjet deposition [2016]

  • Rapid Prototyping Journal, 2016, Vol. 22, Issue 1, pp. 77-86.

43. Fabrication and characterisation of PCL and PCL/PLA scaffolds for tissue engineering [2014]

  • Patrício T., Domingos M., Gloria A., D'Amora U., Coelho J.F., and Bártolo P.J.
  • Rapid Prototyping Journal, 2014, Vol. 20, Issue 2, pp. 145-156.

44. 3D roughness profile model in fused deposition modelling [2013]

  • Rapid Prototyping Journal, 2013, Vol. 19, Issue 4, pp. 240-252.

45. Suitability of PLA/TCP for fused deposition modeling [2012]

  • Drummer Dietmar, Cifuentes‐Cuéllar Sandra, and Rietzel Dominik
  • Rapid Prototyping Journal, 2012, Vol. 18, Issue 6, pp. 500-507.

46. FDM models and FEA in dysplastic hip [2012]

  • Dhakshyani Ratnadurai, Nukman Yusoff, and Osman Noor Azuan Abu
  • Rapid Prototyping Journal, 2012, Vol. 18, Issue 3, pp. 215-221.

47. Mechanical behavior of acrylonitrile butadiene styrene fused deposition materials modeling [2003]

  • Rodríguez José F., Thomas James P., and Renaud John E.
  • Rapid Prototyping Journal, 2003, Vol. 9, Issue 4, pp. 219-230.

48. Process speeding up via deposition planning in fused deposition‐based layered manufacturing processes [2003]

  • Han Wenbiao, Jafari Mohsen A., and Seyed Kian
  • Rapid Prototyping Journal, 2003, Vol. 9, Issue 4, pp. 212-218.

Catalog

Books, media, physical & digital resources
See catalog results
Catalog results include