articles+ search results

DNA-encoded chemistry (DEL), photochemistry, flow photoreactor concept, batch to flow, rapid prototyping, photoredox reaction, Chemistry, and QD1-999

The transfer from batch to flow chemistry is often based on commercial microfluidic equipment, such as costly complete reactor systems, which cannot be easily tailored to specific requirements of technologies such as DNA-encoded library technology (DELT), in particular for increasingly important photochemical reactions. Customized photoreactor concepts using rapid prototyping technology offer a modular, flexible, and affordable design that allows for adaptation to various applications. In order to validate the prototype reactors, a photochemical pinacol coupling reaction at 368 nm was conducted to demonstrate the transfer from batch to flow chemistry. The conversion rates were optimized by adapting the design parameters of the microfluidic flow photoreactor module. Subsequently, the photoreactor module has been extended to an application with DNA-tagged substrates by switching to LEDs with a wavelength of 454 nm. The successful recovery of DNA confirmed the feasibility of the modular-designed flow photo reactor. This collaborative approach holds enormous potential to drive the development of DELT and flow equipment design.

Interactive systems, rapid prototyping, interaction design, physical product design, design tools, design cycle, Electrical engineering. Electronics. Nuclear engineering, and TK1-9971

Designing interactive prototypes involves multiple tools and skills. In addition, several design cycles are required to iterate through idea generation, evaluation of design alternatives, and development. Consequently, prototyping tools should offer flexibility and adaptability to allow designers to quickly test and evaluate different ideas, design alternatives, materials, interactions, etc. To meet these requirements, we designed Protobject – a rapid prototyping tool aimed at making the early stages of prototyping interactive products more flexible. Protobject allows designers to reinvent and reuse existing objects for prototyping purposes by making them interactive. After introducing the features of Protobject and discussing the differences with similar tools, we present a user evaluation through two workshop sessions held in Milan during Brera Design Days and attended by 22 people. The results suggest that Protobject facilitates cooperation between people with different skills by allowing them to envision interactive prototypes together.

Robustness optimization design, Rapid prototyping, Functional artifacts, Fuzzy decision-making, Infrared thermographs, Visualized computing digital twins, Drawing. Design. Illustration, NC1-1940, Computer applications to medicine. Medical informatics, R858-859.7, Computer software, and QA76.75-76.765

Abstract This study presents a robustness optimization method for rapid prototyping (RP) of functional artifacts based on visualized computing digital twins (VCDT). A generalized multiobjective robustness optimization model for RP of scheme design prototype was first built, where thermal, structural, and multidisciplinary knowledge could be integrated for visualization. To implement visualized computing, the membership function of fuzzy decision-making was optimized using a genetic algorithm. Transient thermodynamic, structural statics, and flow field analyses were conducted, especially for glass fiber composite materials, which have the characteristics of high strength, corrosion resistance, temperature resistance, dimensional stability, and electrical insulation. An electrothermal experiment was performed by measuring the temperature and changes in temperature during RP. Infrared thermographs were obtained using thermal field measurements to determine the temperature distribution. A numerical analysis of a lightweight ribbed ergonomic artifact is presented to illustrate the VCDT. Moreover, manufacturability was verified based on a thermal-solid coupled finite element analysis. The physical experiment and practice proved that the proposed VCDT provided a robust design paradigm for a layered RP between the steady balance of electrothermal regulation and manufacturing efficacy under hybrid uncertainties.

3dtechnology, pattern, prototyping, garment factories, virtual simulation), Fine Arts, Architecture, and NA1-9428

3D technology is considered one of the Pattern digital technologies that help this technology to increase, ease and speed of completion of industrial processes. This study deals with how to take advantage of 3D technology in developing the performance of the samples department in the technical department of ready-to-wear factories, in order to solve the problems of the samples section associated with the implementation of the 2D Pattern, as this problem was concluded through field study and practical experiences in ready-to-wear factories in Egypt.Controlling the fitting Pattern of clothes in the samples section faces many difficulties, the most important of which is the incompatibility of the industrial Pattern drawn with the human body “Pattern ". Where defects appeared in the product after conducting and implementing the first sample, which required making adjustments to the industrial Pattern and re-executing the sample a second time until it became free from defects and ready to perform the grading according to the measurements and the "order" of the operation order required to be executed to start production processes, which results in it. In the presence of lost time to implement the sample, as well as wasted effort, and wastes in the raw materials used in the implementation of the sample (fabric/ accessories / threads / and direct and indirect costs) that will be quantified after that.In order to find a solution to this problem, this research presents a case study using the "CLO5.1" program to improve the industrial Pattern in order to improve the quality of the male industrial Pattern drawing using 3D technology by making adjustments to some areas where the stress and stress ratios are high due to the lack of nan fitting of the Pattern. Industrial, which does not appear clearly even during implementation. The study concluded that the implementation of the CLO5.1 program in the sample section has succeeded in reducing the time wastage for sample production and the wastage of raw materials, thus reducing the cost of sample productionKey words :( 3Dtechnology ، pattern، Prototyping ، Garment Factories ،virtual simulation)

method of mathematical prototyping of energy processes, integration of differential equations, machine learning, Motor vehicles. Aeronautics. Astronautics, and TL1-4050

Background. Solving the problem of choosing the optimal parameters, as well as diagnosing and predicting the technical condition of aircraft equipment components, necessitates the construction of a model of this components. At the input of the models, the measured characteristics are fed, and the controlled characteristics are obtained at the output. The authors proposed a method of mathematical prototyping of energy processes, allowing to build adequate mathematical models (which do not contradict the general physical laws) of the dynamics of physical and chemical processes of various nature. Then these equations are converted to models that are directly used to solve the mentioned practical problems. To simplify calculations, it is necessary to correctly set the analytical approximation of solutions to differential equations of the method of mathematical prototyping of energy processes. This determines the urgency of the mentioned problem. Matherials and methods. In the case of using special methods for solving a system of differential equations, it is necessary to specify an approximate analytical expression for the solution (general or particular) of the system being solved, the coefficients of which are determined from the system of equations being solved. The analytical approximation of the solution of systems of differential equations of the method of mathematical prototyping of energy processes is based on the concept of the system tending to some stationary state, which changes as a result of feedback. Results. The proposed method for setting the analytical approximation of solutions to the equations of the method of mathematical prototyping of energy processes makes it possible to set a class of correct mathematical models (which do not contradict the general physical laws, as well as the features of the flow of physical and chemical processes in a particular system under consideration) of various components of aviation equipment. In such a class, models are built (methods of identification theory, machine learning, etc.) with the lowest computational costs. Conclusions. Qualitative analysis of the equations of the method of mathematical prototyping of energy processes makes it possible to specify the most narrowed class of mathematical models, in which an adequate mathematical model of the required accuracy of an arbitrary system is built with the lowest computational costs.

Power electronics, Inverters, Rapid control prototyping, Experimental setups, Science (General), and Q1-390

A flexible power electronic converter embedding a rapid control prototyping platform suitable to be applied in research test setups and teaching laboratories is proposed and described in this paper. The electronic system is composed of three subsystems, namely, i) three half-bridge power boards, ii) a dc-link capacitor bank with a half-bridge power module for active dc-link control, iii) an interfacing board, called motherboard, to couple the power modules with a control unit, iv) a digital control unit with rapid control prototyping functionalities for controlling power electronic circuits. Power modules integrate sensors with related conditioning circuits, driving circuits for power switches, and protection circuits. Conversion circuits exploit GaN electronic switches for optimal performance. The architecture and implementation of the system are described in detail in this manuscript. Main applications are in the implementation of conversion circuits for supplying arbitrary ac or dc voltages or currents, testing of new control algorithms for power electronic converters, testing of systems of electronic converters in, for example, smart nanogrids or renewable energy applications, training of undergraduate and graduate students.

Science

Abstract Microfluidic devices have found extensive applications in mechanical, biomedical, chemical, and materials research. However, the high initial cost, low resolution, inferior feature fidelity, poor repeatability, rough surface finish, and long turn-around time of traditional prototyping methods limit their wider adoption. In this study, a strategic approach to a deterministic fabrication process based on in-situ image analysis and intermittent flow control called image-guided in-situ maskless lithography (IGIs-ML), has been proposed to overcome these challenges. By using dynamic image analysis and integrated flow control, IGIs-ML provides superior repeatability and fidelity of densely packed features across a large area and multiple devices. This general and robust approach enables the fabrication of a wide variety of microfluidic devices and resolves critical proximity effect and size limitations in rapid prototyping. The affordability and reliability of IGIs-ML make it a powerful tool for exploring the design space beyond the capabilities of traditional rapid prototyping.

Technology, Engineering (General). Civil engineering (General), and TA1-2040

Abstract In this work, we introduce a polymer version of a previously developed silicon MEMS drop deposition tool for surface functionalization that consists of a microcantilever integrating an open fluidic channel and a reservoir. The device is fabricated by laser stereolithography, which offers the advantages of low-cost and fast prototyping. Additionally, thanks to the ability to process multiple materials, a magnetic base is incorporated into the cantilever for convenient handling and attachment to the holder of a robotized stage used for spotting. Droplets with diameters ranging from ∼50 µm to ∼300 µm are printed upon direct contact of the cantilever tip with the surface to pattern. Liquid loading is achieved by fully immersing the cantilever into a reservoir drop, where a single load results in the deposition of more than 200 droplets. The influences of the size and shape of the cantilever tip and the reservoir on the printing outcome are studied. As a proof-of-concept of the biofunctionalization capability of this 3D printed droplet dispenser, microarrays of oligonucleotides and antibodies displaying high specificity and no cross-contamination are fabricated, and droplets are deposited at the tip of an optical fiber bundle.

IoT, rapid prototyping, education, LoRa, LoRaWAN, Arduinoblocks, Chemical technology, and TP1-1185

LoRa technology has gained popularity as one of the most widely used standards for device interconnection due to its ability to cover long distances and energy efficiency, making it a suitable choice for various Internet of Things (IoT) monitoring and control applications. In this sense, this work presents the development of a visual support tool for creating IoT devices with LoRa and LoRaWAN connectivity. This work significantly advances the state of the art in LoRa technology by introducing a novel visual support tool tailored for creating IoT devices with LoRa and LoRaWAN connectivity. By simplifying the development process and offering compatibility with multiple hardware solutions, this research not only facilitates the integration of LoRaWAN technology within educational settings but also paves the way for rapid prototyping of IoT nodes. The incorporation of block programming for LoRa and LoRaWAN using the Arduinoblocks framework as a graphical environment enhances the capabilities of the tool, positioning it as a comprehensive solution for efficient firmware generation. In addition to the visual tool for firmware generation, multiple compatible hardware solutions enable easy, economical, and stable development, offering a comprehensive hardware and software solution. The hardware proposal is based on an ESP32 microcontroller, known for its power and low cost, in conjunction with an RFM9x module that is based on SX127x LoRa transceivers. Finally, three successfully tested use cases and a discussion are presented.

prototyping, knowledge, knowledge dimensions, prototyping methods, product development process, Drawing. Design. Illustration, NC1-1940, Engineering design, and TA174

Prototyping is a knowledge generation activity facilitating improved understanding of problem and solution spaces. This knowledge can be generated across a range of dimensions, termed knowledge dimensions (KDs), via a range of methods and media, each with their own inherent properties. This article investigates and characterises the relationships between prototypes and knowledge generated from prototyping activities during the design process, by establishing how different methods and media contribute across KDs. In so doing, it provides insights into prototyping activity, as well as affording a means by which prototyping knowledge generation may be studied in detail. The investigation considers sets of prototypes from eight parallel 16-week design projects, with subsequent investigation of the knowledge contributions that each prototype provides and at what stage of the design process. Results showed statistical significance supporting three inferences: i) teams undertaking the same design brief create similar knowledge profiles; ii) prototyping fidelity impacts KD contribution and iii) KDs align with the different phases of the project. This article demonstrates a means to describe and potentially prescribe knowledge generation activities through prototyping. Correspondingly, the article contends that consideration of KDs offers potential to improve aspects of the design process through better prototyping method selection and sequencing.

Wireless automatic weather station, Low-cost weather instrumentation, Natural disaster monitoring, Intelligent sensor calibration, Internet of things, Information technology, and T58.5-58.64

Weather events put human lives at risk mostly when people might occupy areas susceptible to natural disasters. Deploying Professional Weather Stations (PWS) in vulnerable areas is key for monitoring weather with reliable measurements. However, such professional instrumentation is notably expensive while remote sensing from a number of stations is paramount. This imposes challenges on the large-scale weather station deployment for broad monitoring from large observation networks such as in Cemaden—The Brazilian National Center for Monitoring and Early Warning of Natural Disasters. In this context, in this paper, we propose a Low-Cost Automatic Weather Station (LCAWS) system developed from Commercial Off-The-Shelf (COTS) and open-source Internet of Things (IoT) technologies, which provides measurements as reliable as a reference PWS for natural disaster monitoring. When being automatic, LCAWS is a stand-alone photovoltaic system connected wirelessly to the Internet in order to provide real-time reliable end-to-end weather measurements. To achieve data reliability, we propose an intelligent sensor calibration method to correct measures. From a 30-day uninterrupted observation with sampling in minute resolution, we show that the calibrated LCAWS sensors have no statistically significant differences from the PWS measurements. As such, LCAWS has opened opportunities for reducing maintenance costs in Cemaden's observational network.

rapid prototyping, additive manufacturing, broadband low noise amplifiers, near-field communication, aerosol jet printing, Production capacity. Manufacturing capacity, and T58.7-58.8

In this paper, we report the use of additive manufacturing methods to fabricate a high aspect ratio, low noise amplifier (LNA) for a handheld active sensor device operating at up to 1 GHz. The new form factor LNA incorporates a modification of a square-shaped commercial off-the-shelf (COTS) LNA into a 5:1 aspect ratio device without a loss in RF performance. For rapid prototyping, we employ both subtractive and additive manufacturing technologies, such as milling, extrusion-based syringe printing, and aerosol jet printing techniques to fabricate both small form factor and high aspect ratio devices. The 5:1 aspect ratio LNA demonstrated a 20% smaller form factor, a gain of 25 dB, and an NF less than 3 dB over an operating frequency range up to 1 GHz, comparable to the COTS LNA. Design, simulation, and experimental results are given to highlight the advantages of 3D printed hybrid electronic technology over the conventional PCB fabrication method for rapid prototyping of RF electronic devices.

Social sciences (General) and H1-99

One example of information technology that has been widely applied to the business processes of a business venture is a web-based information system. Micro, Small, and Medium Enterprises (MSMEs) are productive businesses supporting the country's economy and individual companies. One of the MSMEs that will be the object of research this time is MSME Putra Anugrah Sejahtera, and This MSMEs sells premium spray paint for wheels with more than 100 colours. Around 15-20 customers daily make direct transactions at these MSMEs. In the running business processes, there are several obstacles, such as incorrect information when checking the stock of goods and recording sales transactions. This research aims to produce a web-based cashier and inventory information system to minimize errors and simplify sales and inventory transactions. System development using the Prototyping model with RDBMS MySQL was successfully developed. The results testing of systems using the User Acceptance Test (UAT) show that the resulting system follows user needs and answers the obstacles UMKM Putra Anugrah Sejahtera faces.

systems design, agrifood systems, particpatory design, covered food markets, digital transformation, circular transition, Visual arts, N1-9211, Hospitality industry. Hotels, clubs, restaurants, etc. Food service, and TX901-946.5

The challenges posed by the environmental sustainability and circular transition of food chains increasingly see the emergence of practices that link strategies and policies to territorial pilot projects that connect physical and digital infrastructures. This aspect is particularly evident in the change of urban production–transformation–distribution–consumption models. They are the basis of a complex system that influences individual and collective behaviours, life within neighbourhoods and the intertwining of incoming and outgoing food flows as the waste flow. The article will discuss the insight emerging from REFLOW, an EU H2020-funded project. It runs from June 2019 to May 2022, aiming to build an integrated approach for developing new participatory design and co-design practices dedicated to innovative and circular urban metabolisms to promote circular solutions capable of bringing environmental, social and economic benefits. In particular, the Milan Pilot involves the municipality of Milan, local makerspaces and FabLabs, agri-food enterprises and other local stakeholders. They collectively worked on municipal food markets to upgrade them into circularity hubs. The Milan Pilot – named ‘Food Market 4.0’ – concerns the design and prototyping of three product–service systems solutions to increase the circularity of the municipal covered markets and their offer service related to agri-food products. The solutions implemented are linked to a data layer that will be the basis of a city-wide renewal process of the 22 other ones. The prototypes could represent some of the building blocks of the datafication of the food distribution metabolisms and the start of a new interactive process of selling connected with other possible service offers.

Materials of engineering and construction. Mechanics of materials, TA401-492, Chemical technology, TP1-1185, Textile bleaching, dyeing, printing, etc., and TP890-933

3D virtual prototyping for garment development, although not much exploited and appreciated by the clothing industry in the early days of its appearance two decades ago, has now been explored (research-wise) extensively especially in the pandemic period and its impact on the whole supply chain of garments and fashion products. This virtual prototype which allows the company to visualize the status and condition of a clothing product that may be thousands of kilometers away, providing insights into how products can be better designed, manufactured, operated and serviced before companies invest in physical prototypes and assets, is often called digital twin. At the same time, laser-cut as a creative design technique on clothing materials have emerged in recent times, as fashion moguls are seeing the benefits that the technology presents. Laser cut technology with its benefits of accuracy, speed, precision, applicability in various materials, flexibility in geometry, interoperability with other systems like CAD/CAM and CIM, sustainability in resources and source of inspiration for several upcoming designers, provides an excellent approach for creating bridges between the past, the present and the future in history of fashion design. The aim of this paper was to provide a decision-making framework for the selection of an effective digital twinning process with the use of two different 3D virtual prototyping tools. For this purpose, a methodological framework is proposed which guides the creator according to the final use of the digital garment twin: evaluation of actual fit and actual representation of the produced physical, or as a shared digital asset for an exclusive digital environment.