articles+ search results

4,851 articles+ results

View results as:
Number of results to display per page

1. TRIZ-based method for developing a conceptual laparoscopic surgeon’s chair

2. A novel design strategy to enhance buckling resistance of thin-walled single-cell lattice structures via topology optimisation

3. Multifunctional and multimaterial contact lenses: tailored solutions for tunable color filtering and tear pH sensing

4. Modelling, optimization, and testing of novel cuboidal spherical plate lattice structures

5. Development of a novel gantry system for cooperative printing of plastic materials

6. Wire-arc directed energy deposition of monolithic and bimetallic structures of maraging 250 steel

7. 17-4 PH and SS316L bimetallic structures via additive manufacturing

8. Deposition dynamics and analysis of polyurethane foam structure boundaries for aerial additive manufacturing

9. Modeling and application of droplet oscillation momentum for elucidating the development of surface roughness in wire-arc additive manufacturing

10. Manipulating melt pool thermofluidic transport in directed energy deposition driven by a laser intensity spatial shaping strategy

11. Sub-microscale 3D printing based on cold-constrained local electrodeposition

12. Heterogeneous grain structure in biodegradable Zn prepared via mechanical alloying and laser powder bed fusion for strength-plasticity synergy

13. Effect of heat treatment and electroless Ni-P coating on mechanical property and corrosion behaviour of 316L stainless steel fabricated by laser powder bed fusion

14. Incorporating coarse aggregates into 3D concrete printing from mixture design and process control to structural behaviours and practical applications: a review

15. Effects of path patterns on residual stresses and deformations of directed energy deposition-arc built blocks

16. A non-probabilistic convex modelling framework for uncertainty quantification of laser powder bed fusion fabricated structures based on limited data

17. Enhancing the sensitivity of 3D printed sensors via ironing and void reduction

18. Large-format additive manufacturing of polymers: a review of fabrication processes, materials, and design

19. Multi-objective optimisation of process parameters for laser-based directed energy deposition of a mixture of H13 and M2 steel powders on 4Cr5Mo2SiV1 steel

20. Microstructural evolution modelling and low-stress fatigue performance of bimodal-structured Al-Mg-Sc-Zr alloy produced by laser powder bed fusion additive manufacturing

21. Fatigue performance of metal additive manufacturing: a comprehensive overview

22. Revealing formation mechanism of end of process depression in laser powder bed fusion by multi-physics meso-scale simulation

23. Microstructure and mechanical properties of Al-Cu alloy during wire and arc additive manufacturing by adding micron TiB2 particles

24. Energy absorption and piezoresistive characteristics of 3D printed honeycomb composites with hybrid cell architecture

25. Additive manufacturing of self-sensing parts through material extrusion

26. Enhanced bone regeneration with bioprinted GelMA/Bentonite scaffolds inspired by bone matrix

27. Topology optimisation for vat photopolymerization 3D printing of ceramics with flushing jet accessibility constraint

28. Three-dimensional, soft magnetic-cored solenoids via multi-material extrusion

29. Internal topology optimisation of 3D printed concrete structures: a method for enhanced performance and material efficiency

30. LattSAC: a software for the acoustic modelling of lattice sound absorbers

31. Mapping 3D printed part density and filament flow characteristics in the material extrusion (MEX) process for filled and unfilled polymers

32. Truss-plate hybrid lattice metamaterials with broadband vibration attenuation and enhanced energy absorption

33. A novel layer-based optimization method for stabilizing the early printing stage of LPBF process

34. Mechanical property enhancement in additively manufactured NiTi double-asymmetric honeycombs with bioinspired graded design

35. High-efficiency pentafluorostilbene-based photocatalysts dedicated to preparing fluorescent 3D printed polymer nanocomposites

36. Hygro-thermal coupling on 4D-printed biocomposites as key for meteosensitive shape-changing materials

37. Detection and quantitative evaluation of surface defects in wire and arc additive manufacturing based on 3D point cloud

38. Use of creep and recovery protocol to assess the printability of fibre-reinforced 3D printed white Portland cement composites

39. Grain refinement of NiTi alloys during ultrasound-assisted wire-arc directed energy deposition

40. 3D-printing of architected calcium silicate binders with enhanced and in-situ carbonation

41. Prediction of low-cycle fatigue properties of additive manufactured IN718 by crystal plasticity modelling incorporating effects from crystallographic orientations and defects

42. Effects of sacrificial coating material in laser shock peening of L-PBF printed AlSi10Mg

43. Mechanical properties enhancement of 3D-printed HA-PLA composites using ultrasonic vibration assistance

44. Development and experimental evaluation of surface enhancement methods for laser powder directed energy deposition microchannels

45. Co-continuous structure enhanced magnetic responsive shape memory PLLA/TPU blend fabricated by 4D printing

46. The role of controlled voids shape on the flexural properties of 3D printed food: an approach for tailoring their mechanical properties

47. Upgrading analytical models to predict the onset of degradation in selective laser sintering

48. Unlocking multiscale metallic metamaterials via lithography additive manufacturing

49. Integrated free-standing WS2 3D-printed carbon supercapacitor with solid state electrolyte

50. Inhomogeneity and anisotropy of Al-Zn-Mg-Cu alloy manufactured by wire arc additive manufacturing: microstructure, mechanical properties, stress corrosion cracking susceptibility

51. Modelling and researching the evolution of stress during arc-directed energy deposition (ADED) hybrid inter-layer hammering

52. A BIM-enabled robot control system for automated integration between rebar reinforcement and 3D concrete printing

53. A multi-materials 3D-printed continuous conductive fibre-based metamaterial for broadband microwave absorption

54. Effect of acetone treatment and copper oxide coating on the mechanical and wear properties of 3D-printed acrylonitrile butadiene styrene structures

55. The enhanced mechanical properties of laser powder bed fusion Al-Mn-Sc alloy via non-isothermal aging

56. Advancing the additive manufacturing of PLA-ZnO nanocomposites by fused filament fabrication

57. AM-SegNet for additive manufacturing in situ X-ray image segmentation and feature quantification

58. Microstructure, corrosion resistance and wear properties of laser directed energy deposited CrCoNi medium-entropy alloy after cyclic deep cryogenic treatment

59. A novel model for directed energy deposition-arc based on in-order stacking of primitives

60. An integrated multiscale simulation guiding the processing optimisation for additively manufactured nickel-based superalloys

61. High-precision digital light processing (DLP) printing of microstructures for microfluidics applications based on a machine learning approach

62. A curved layering algorithm based on voxelization and geodesic distance for robotic GMA additive manufacturing

63. A ribbed strategy disrupts conventional metamaterial deformation mechanisms for superior energy absorption

64. Numerical modelling of the viscoelastic polymer melt flow in material extrusion additive manufacturing

65. Fabrication of functionalised graphene-PAEK nanocomposites for different manufacturing processes

66. A computationally efficient thermo-mechanical model with temporal acceleration for prediction of residual stresses and deformations in WAAM

67. Additively manufactured multi-functional metamaterials: low coefficient of thermal expansion and programmable Poisson’s ratio

68. Custom orthotic insoles with gradual variable stiffness using 3D printed spacer technique

69. Microstructure and property enhancement of 7075 aluminium alloy via laser metal deposition augmented by in-situ ultrasonic vibration

70. Accelerated improvement in tensile superelasticity of electron beam directed energy deposition manufactured NiTi alloys by artificial thermal cycling combined with low temperature aging treatment

71. Influence of scale effect on surface morphology in laser powder bed fusion technology

72. Microwave-assisted 3D printing of epoxy resin ink using rectangular waveguide

73. Direct wire writing technique benefitting the flexible electronics

74. Sound absorption performance of a micro-perforated plate sandwich structure based on selective laser melting

75. Strategies towards large-scale 3D printing without size constraints

76. 3D-printed biodegradable polycaprolactone rib implants with tissue-specific mechanical properties promote chest wall recovery by stimulating tissue fibrosis

78. Multilevel sensor for monitoring external and internal environment of eggs

79. The TrollLabs open hackathon dataset: Generative AI and large language models for prototyping in engineering design

80. IDEA challenge 2022 dataset: Prototypes from a design Hackathon

81. Approaching open innovation in customization frameworks for product prototypes with emphasis on quality and life cycle assessment (QLCA)

82. Exploring innovative techniques for damage control during natural disasters

83. Machine learning assisted material development for lithography-based additive manufacturing of porous alumina ceramics

86. An Augmented Reality Visualization System for Simulated Multirotor Aerial Vehicles

87. Integrated approach to generate artificial samples with low tumor fraction for somatic variant calling benchmarking

88. Developing an mHealth program to improve HIV care continuum outcomes among young Black gay and bisexual men

89. Are Open Innovation and Entrepreneurial Intentions complements or substitutes for the successful commercialization of academic Breakthrough Technologies?

90. Use of design thinking in the proposal of a multi-compound solar dryer applied to processes of traditional P'urhépecha Medicine

91. Machine learning models for the prediction of turbulent combustion speed for hydrogen-natural gas spark ignition engines

92. Designing and prototyping the architecture of a digital twin for wind turbine

93. Simulation-based business model innovation process for business-to-business contexts

94. Orbital Prosthesis Rehabilitation in Biomedical Engineering by Means of Computer Vision-Photogrammetry and 3D Prototyping

95. The Recombinant Profilin from Free-Living Amoebae Induced Allergic Immune Responses via TLR2

96. Designing materials by laser powder bed fusion with machine learning-driven bi-objective optimization

97. Arbitrary engineering of spatial caustics with 3D-printed metasurfaces

98. Experimental concept study of a small engine silencer unit based on microperforated elements

99. Prototyping an Ontological Framework for Cellular Senescence Mechanisms: A Homeostasis Imbalance Perspective

100. Arduino-Based Readout Electronics for Nuclear and Particle Physics

Catalog

Books, media, physical & digital resources

Guides

Course- and topic-based guides to collections, tools, and services.