articles+ search results

Female, Humans, Pilot Projects, Endoscopes, Fallopian Tubes, Ovarian Neoplasms diagnostic imaging, and Ovarian Neoplasms pathology

Significance: High grade serous ovarian cancer is the most deadly gynecological cancer, and it is now believed that most cases originate in the fallopian tubes (FTs). Early detection of ovarian cancer could double the 5-year survival rate compared with late-stage diagnosis. Autofluorescence imaging can detect serous-origin precancerous and cancerous lesions in ex vivo FT and ovaries with good sensitivity and specificity. Multispectral fluorescence imaging (MFI) can differentiate healthy, benign, and malignant ovarian and FT tissues. Optical coherence tomography (OCT) reveals subsurface microstructural information and can distinguish normal and cancerous structure in ovaries and FTs.
Aim: We developed an FT endoscope, the falloposcope, as a method for detecting ovarian cancer with MFI and OCT. The falloposcope clinical prototype was tested in a pilot study with 12 volunteers to date to evaluate the safety and feasibility of FT imaging prior to standard of care salpingectomy in normal-risk volunteers. In this manuscript, we describe the multiple modifications made to the falloposcope to enhance robustness, usability, and image quality based on lessons learned in the clinical setting.
Approach: The ∼ 0.8    mm diameter falloposcope was introduced via a minimally invasive approach through a commercially available hysteroscope and introducing a catheter. A navigation video, MFI, and OCT of human FTs were obtained. Feedback from stakeholders on image quality and procedural difficulty was obtained.
Results: The falloposcope successfully obtained images in vivo . Considerable feedback was obtained, motivating iterative improvements, including accommodating the operating room environment, modifying the hysteroscope accessories, decreasing endoscope fragility and fiber breaks, optimizing software, improving fiber bundle images, decreasing gradient-index lens stray light, optimizing the proximal imaging system, and improving the illumination.
Conclusions: The initial clinical prototype falloposcope was able to image the FTs, and iterative prototyping has increased its robustness, functionality, and ease of use for future trials.
(© 2023 The Authors.)

Image reconstruction from data collected over full-angular range (FAR) in dual-energy CT (DECT) is well-studied. There exists interest in DECT with advanced scan configurations in which data are collected only over limited-angular ranges (LARs) for meeting unique workflow needs in certain practical imaging applications, and thus in the algorithm development for image reconstruction from such LAR data. The objective of the work is to investigate and prototype image reconstructions in DECT with LAR scans. We investigate and prototype optimization programs with various designs of constraints on the directional-total-variations (DTVs) of virtual monochromatic images and/or basis images, and derive the DTV algorithms to numerically solve the optimization programs for achieving accurate image reconstruction from data collected in a slew of different LAR scans. Using simulated and real data acquired with low- and high-kV spectra over LARs, we conduct quantitative studies to demonstrate and evaluate the optimization programs and their DTV algorithms developed. As the results of the numerical studies reveal, while the DTV algorithms yield images of visual quality and quantitative accuracy comparable to that of the existing algorithms from FAR data, the former reconstruct images with improved visualization, reduced artifacts, and also enhanced quantitative accuracy when applied to LAR data in DECT. Optimization-based, one-step algorithms, including the DTV algorithms demonstrated, can be developed for quantitative image reconstruction from spectral data collected over LARs of extents that are considerably smaller than the FAR in DECT. The theoretical and numerical results obtained can be exploited for prototyping designs of optimization-based reconstructions and LAR scans in DECT, and they may also yield insights into the development of reconstruction procedures in practical DECT applications. The approach and algorithms developed can naturally be applied to investigating image reconstruction from LAR data in multi-spectral and photon-counting CT.
Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
(Copyright © 2023 Elsevier B.V. All rights reserved.)

Acetyl Coenzyme A metabolism, Cell Extracts, Escherichia coli metabolism, Saccharomyces cerevisiae genetics, Saccharomyces cerevisiae metabolism, and Metabolic Engineering

Building and optimizing biosynthetic pathways in engineered cells holds promise to address societal needs in energy, materials, and medicine, but it is often time-consuming. Cell-free synthetic biology has emerged as a powerful tool to accelerate design-build-test-learn cycles for pathway engineering with increased tolerance to toxic compounds. However, most cell-free pathway prototyping to date has been performed in extracts from wildtype cells which often do not have sufficient flux towards the pathways of interest, which can be enhanced by engineering. Here, to address this gap, we create a set of engineered Escherichia coli and Saccharomyces cerevisiae strains rewired via CRISPR-dCas9 to achieve high-flux toward key metabolic precursors; namely, acetyl-CoA, shikimate, triose-phosphate, oxaloacetate, α-ketoglutarate, and glucose-6-phosphate. Cell-free extracts generated from these strains are used for targeted enzyme screening in vitro. As model systems, we assess in vivo and in vitro production of triacetic acid lactone from acetyl-CoA and muconic acid from the shikimate pathway. The need for these platforms is exemplified by the fact that muconic acid cannot be detected in wildtype extracts provided with the same biosynthetic enzymes. We also perform metabolomic comparison to understand biochemical differences between the cellular and cell-free muconic acid synthesis systems (E. coli and S. cerevisiae cells and cell extracts with and without metabolic rewiring). While any given pathway has different interfaces with metabolism, we anticipate that this set of pre-optimized, flux enhanced cell extracts will enable prototyping efforts for new biosynthetic pathways and the discovery of biochemical functions of enzymes.
(Copyright © 2023 International Metabolic Engineering Society. Published by Elsevier Inc. All rights reserved.)

Microfluidic 3D cell culture devices that enable the recapitulation of key aspects of organ structures and functions in vivo represent a promising preclinical platform to improve translational success during drug discovery. Essential to these engineered devices is the spatial patterning of cells from different tissue types within a confined microenvironment. Traditional fabrication strategies lack the scalability, cost-effectiveness, and rapid prototyping capabilities required for industrial applications, especially for processes involving thermoplastic materials. Here, an approach to pattern fluid guides inside microchannels is introduced by establishing differential hydrophilicity using pressure-sensitive adhesives as masks and a subsequent selective coating with a biocompatible polymer. Optimal coating conditions are identified using polyvinylpyrrolidone, which resulted in rapid and consistent hydrogel flow in both the open-chip prototype and the fully bonded device containing additional features for medium perfusion. The suitability of the device for dynamic 3D cell culture is tested by growing human hepatocytes in the device under controlled fluid flow for a 14-day period. Additionally, the study demonstrated the potential of using the device for pharmaceutical high-throughput screening applications, such as predicting drug-induced liver injury. The approach offers a facile strategy of rapid prototyping thermoplastic microfluidic organ chips with varying geometries, microstructures, and substrate materials.
(© 2023 The Authors. Advanced Science published by Wiley-VCH GmbH.)

Background: Caregivers play a critical role in the treatment and recovery of youth and young adults at risk for psychosis. Caregivers often report feeling isolated, overwhelmed, and lacking in resources. Mobile health (mHealth) has the potential to provide scalable, accessible, and in-the-moment support to caregivers. To date, few if any mHealth resources have been developed specifically for this population.
Objective: The aim of this study was to conduct user-centered design and testing of an mHealth intervention to support early psychosis caregivers.
Methods: We conducted a multiphase user-centered development process to develop the Bolster mobile app. In phase 1, a total of 21 caregivers were recruited to participate in a qualitative needs assessment and respond to an initial prototype of the Bolster platform. Content analysis was used to identify key needs and design objectives, which guided the development of the Bolster mobile app. In phase 2, a total of 11 caregivers were recruited to participate in a 1-week field trial wherein they provided qualitative and quantitative feedback regarding the usability and acceptability of Bolster; in addition, they provided baseline and posttest assessments of the measures of distress, illness appraisals, and family communication.
Results: In phase 1, participants identified psychoeducation, communication coaching, a guide to seeking services, and support for coping as areas to address. Live prototype interaction sessions led to multiple design objectives, including ensuring that messages from the platform were actionable and tailored to the caregiver experience, delivering messages in multiple modalities (eg, video and text), and eliminating a messaging-style interface. These conclusions were used to develop the final version of Bolster tested in the field trial. In phase 2, of the 11 caregivers, 10 (91%) reported that they would use Bolster if they had access to it and would recommend it to another caregiver. They also reported marked changes in their appraisals of illness (Cohen d=0.55-0.68), distress (Cohen d=1.77), and expressed emotion (Cohen d=0.52).
Conclusions: To our knowledge, this study is the first to design an mHealth intervention specifically for early psychosis caregivers. Preliminary data suggest that Bolster is usable, acceptable, and promising to improve key targets and outcomes. A future fully powered clinical trial will help determine whether mHealth can reduce caregiver burdens and increase engagement in services among individuals affected by psychosis.
(©Benjamin Buck, Mary Wingerson, Erica Whiting, Jaime Snyder, Maria Monroe-DeVita, Dror Ben-Zeev. Originally published in JMIR Mental Health (https://mental.jmir.org), 30.11.2023.)

Nanotechnology, Microfluidics, Bioreactors, Microfluidic Analytical Techniques, and Nanopores

While injection molding is becoming the fabrication modality of choice for high-scale production of microfluidic devices, especially those used for in vitro diagnostics, its translation into the growing area of nanofluidics (structures with at least one dimension <100 nm) has not been well established. Another prevailing issue with injection molding is the high startup costs and the relatively long time between device iterations making it in many cases impractical for device prototyping. We report, for the first time, functional nanofluidic devices with dimensions of critical structures below 30 nm fabricated by injection molding for the manipulation, identification, and detection of single molecules. UV-resin molds replicated from Si masters served as mold inserts, negating the need for generating Ni-mold inserts via electroplating. Using assembled devices with a cover plate via hybrid thermal fusion bonding, we demonstrated two functional thermoplastic nanofluidic devices. The first device consisted of dual in-plane nanopores placed at either end of a nanochannel and was used to detect and identify single ribonucleotide monophosphate molecules via resistive pulse sensing and obtain the effective mobility of the molecule through nanoscale electrophoresis to allow its identification. The second device demonstrated selective binding of a single RNA molecule to a solid phase bioreactor decorated with a processive exoribonuclease, XRN1. Our results provide a simple path towards the use of injection molding for device prototyping in the development stage of any nanofluidic or even microfluidic application, through which rapid scale-up is made possible by transitioning from prototyping to high throughput production using conventional Ni mold inserts.

Neural networks attract significant attention in almost every field due to their widespread applications in various tasks. However, developers often struggle with debugging due to the black-box nature of neural networks. Visual analytics provides an intuitive way for developers to understand the hidden states and underlying complex transformations in neural networks. Existing visual analytics tools for neural networks have been demonstrated to be effective in providing useful hints for debugging certain network architectures. However, these approaches are often architecture-specific with strong assumptions of how the network should be understood. This limits their use when the network architecture or the exploration goal changes. In this paper, we present a general model and a programming toolkit, Neural Network Visualization Builder (NNVisBuilder), for prototyping visual analytics systems to understand neural networks. NNVisBuilder covers the common data transformation and interaction model involved in existing tools for exploring neural networks. It enables developers to customize a visual analytics interface for answering their specific questions about networks. NNVisBuilder is compatible with PyTorch so that developers can integrate the visualization code into their learning code seamlessly. We demonstrate the applicability by reproducing several existing visual analytics systems for networks with NNVisBuilder. The source code and some example cases can be found at https://github.com/sysuvis/NVB.

The flapping-wing technology has emerged recently in the application of unmanned aerial robotics for autonomous flight, control, inspection, monitoring, and manipulation. Despite the advances in applications and outdoor manual flights (open-loop control), closed-loop control is yet to be investigated. This work presents a nonlinear optimal closed-loop control design via the state-dependent Riccati equation (SDRE) for a flapping-wing flying robot (FWFR). Considering that the dynamic modeling of the flapping-wing robot is complex, a proper model for the implementation of nonlinear control methods is demanded. This work proposes an alternative approach to deliver an equivalent dynamic for the translation of the system and a simplified model for orientation, to find equivalent dynamics for the whole system. The objective is to see the effect of flapping (periodic oscillation) on behavior through a simple model in simulation. Then the SDRE controller is applied to the derived model and implemented in simulations and experiments. The robot bird is a 1.6 m wingspan flapping-wing system (six-degree-of-freedom robot) with four actuators, three in the tail, and one as the flapping input. The underactuated system has been controlled successfully in position and orientation. The control loop is closed by the motion capture system in the indoor test bed where the experiments of flight have been successfully done.
Competing Interests: Declaration of competing interest The authors declare that there is no conflict of interest for this paper.
(Copyright © 2023 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Premature birth and neonatal mortality are significant global health challenges, with 15 million premature births annually and an estimated 2.5 million neonatal deaths. Approximately 90% of preterm births occur in low/middle income countries, particularly within the global regions of sub-Saharan Africa and South Asia. Neonatal hypothermia is a common and significant cause of morbidity and mortality among premature and low birth weight infants, particularly in low/middle-income countries where rates of premature delivery are high, and access to health workers, medical commodities, and other resources is limited. Kangaroo Mother Care/Skin-to-Skin care has been shown to significantly reduce the incidence of neonatal hypothermia and improve survival rates among premature infants, but there are significant barriers to its implementation, especially in low/middle-income countries (LMICs). The paper proposes the use of a multidisciplinary approach to develop an integrated mHealth solution to overcome the barriers and challenges to the implementation of Kangaroo Mother Care/Skin-to-skin care (KMC/STS) in LMICs. The innovation is an integrated mHealth platform that features a wearable biomedical device (NeoWarm) and an Android-based mobile application (NeoRoo) with customized user interfaces that are targeted specifically to parents/family stakeholders and healthcare providers, respectively. This publication describes the iterative, human-centered design and participatory development of a high-fidelity prototype of the NeoRoo mobile application. The aim of this study was to design and develop an initial ("A") version of the Android-based NeoRoo mobile app specifically to support the use case of KMC/STS in health facilities in Kenya. Key functions and features are highlighted. The proposed solution leverages the promise of digital health to overcome identified barriers and challenges to the implementation of KMC/STS in LMICs and aims to equip parents and healthcare providers of prematurely born infants with the tools and resources needed to improve the care provided to premature and low birthweight babies. It is hoped that, when implemented and scaled as part of a thoughtful, strategic, cross-disciplinary approach to reduction of global rates of neonatal mortality, NeoRoo will prove to be a useful tool within the toolkit of parents, health workers, and program implementors.
Competing Interests: I have read the journal’s policy and the authors of this manuscript have the following competing interests: Dr. Sherri Bucher has been awarded intellectual property protection for invention of the NeoWarm biomedical device. This includes US patent US10390630B2, Nigeria NG/PT/C/2018/2802 and ARIPO patent PT/C/2018/2802. The authors declare no other potential conflicts of interest with respect to research, authorship, financial relationships, and/or publication of the article.
(Copyright: © 2023 Bucher et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Humans, SARS-CoV-2, Australia epidemiology, Disease Outbreaks prevention control, Workplace, and COVID-19 epidemiology

Early case detection is critical to preventing onward transmission of COVID-19 by enabling prompt isolation of index infections, and identification and quarantining of contacts. Timeliness and completeness of ascertainment depend on the surveillance strategy employed. This paper presents modelling used to inform workplace testing strategies for the Australian government in early 2021. We use rapid prototype modelling to quickly investigate the effectiveness of testing strategies to aid decision making. Models are developed with a focus on providing relevant results to policy makers, and these models are continually updated and improved as new questions are posed. Developed to support the implementation of testing strategies in high risk workplace settings in Australia, our modelling explores the effects of test frequency and sensitivity on outbreak detection. We start with an exponential growth model, which demonstrates how outbreak detection changes depending on growth rate, test frequency and sensitivity. From the exponential model, we learn that low sensitivity tests can produce high probabilities of detection when testing occurs frequently. We then develop a more complex Agent Based Model, which was used to test the robustness of the results from the exponential model, and extend it to include intermittent workplace scheduling. These models help our fundamental understanding of disease detectability through routine surveillance in workplaces and evaluate the impact of testing strategies and workplace characteristics on the effectiveness of surveillance. This analysis highlights the risks of particular work patterns while also identifying key testing strategies to best improve outbreak detection in high risk workplaces.
(© 2023. BioMed Central Ltd., part of Springer Nature.)

LoRa technology has gained popularity as one of the most widely used standards for device interconnection due to its ability to cover long distances and energy efficiency, making it a suitable choice for various Internet of Things (IoT) monitoring and control applications. In this sense, this work presents the development of a visual support tool for creating IoT devices with LoRa and LoRaWAN connectivity. This work significantly advances the state of the art in LoRa technology by introducing a novel visual support tool tailored for creating IoT devices with LoRa and LoRaWAN connectivity. By simplifying the development process and offering compatibility with multiple hardware solutions, this research not only facilitates the integration of LoRaWAN technology within educational settings but also paves the way for rapid prototyping of IoT nodes. The incorporation of block programming for LoRa and LoRaWAN using the Arduinoblocks framework as a graphical environment enhances the capabilities of the tool, positioning it as a comprehensive solution for efficient firmware generation. In addition to the visual tool for firmware generation, multiple compatible hardware solutions enable easy, economical, and stable development, offering a comprehensive hardware and software solution. The hardware proposal is based on an ESP32 microcontroller, known for its power and low cost, in conjunction with an RFM9x module that is based on SX127x LoRa transceivers. Finally, three successfully tested use cases and a discussion are presented.

The transfer from batch to flow chemistry is often based on commercial microfluidic equipment, such as costly complete reactor systems, which cannot be easily tailored to specific requirements of technologies such as DNA-encoded library technology (DELT), in particular for increasingly important photochemical reactions. Customized photoreactor concepts using rapid prototyping technology offer a modular, flexible, and affordable design that allows for adaptation to various applications. In order to validate the prototype reactors, a photochemical pinacol coupling reaction at 368 nm was conducted to demonstrate the transfer from batch to flow chemistry. The conversion rates were optimized by adapting the design parameters of the microfluidic flow photoreactor module. Subsequently, the photoreactor module has been extended to an application with DNA-tagged substrates by switching to LEDs with a wavelength of 454 nm. The successful recovery of DNA confirmed the feasibility of the modular-designed flow photo reactor. This collaborative approach holds enormous potential to drive the development of DELT and flow equipment design.
Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.
(Copyright © 2023 Dinter, Willems, Nissalk, Hastürk, Brunschweiger and Kockmann.)

Humans, Models, Anatomic, Computer Simulation, Hand, Anastomosis, Surgical education, Clinical Competence, Thoracic Surgical Procedures, and Simulation Training

Objective: The objective of this paper is to describe the techniques and process of developing and testing a take-home surgical anastomosis simulation model.
Design: Through an iterative process, a simulation model was customized and designed to target specific skill development and performance objectives that focused on anastomotic techniques in thoracic surgery and consist of 3D printed and silicone molded components. Various manufacturing techniques such as silicone dip spin coating and injection molding have been described in this paper and explored as part of the research and development process. The final prototype is a low-cost, take-home model with reusable and replaceable components.
Setting: The study took place at a single-center quaternary care university-affiliated hospital.
Participants: The participants included in the model testing were 10 senior thoracic surgery trainees who completed an in-person training session held during an annual hands- on thoracic surgery simulation course. Feedback was then collected in the form of an evaluation of the model from participants.
Results: All 10 participants had an opportunity to test the model and complete at least 1 pulmonary artery and bronchial anastomosis. The overall experience was rated highly, with minor feedback provided regarding the set- up and fidelity of the materials used for the anastomoses. Overall, the trainees agreed that the model was suitable for teaching advanced anastomotic techniques and expressed an interest in being able to use this model to practice skill development.
Conclusions: Developed simulation model can be easily reduced, with customized components that accurately simulate real-life vascular and bronchial components suitable for training of anastomoses technique amongst senior thoracic surgery trainees.
(Copyright © 2023. Published by Elsevier Inc.)

The layup process of large composite structures made from dry reinforcement fabrics is considered. One such structure is a wind turbine blade, for which the current draping process is mostly manual. Automating the draping process will, therefore, lower the costs. Based on a literature review, a new concept is synthesized and analyzed using an advanced finite element model with rigid multi-body kinematics and a dedicated material model for the fabric. The material model is calibrated using experimental coupon tests, i.e. the bias-extension test (shear) and Peirce's cantilever test (out-of-plane bending). The concept is analyzed numerically by means of a simple parameter study and draping test cases on a flat mold as well as a general double-curved mold. The simulation results show that the concept is feasible for the draping operation and is thus qualified for the subsequent physical prototyping.
Competing Interests: The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Johnny Jakobsen reports financial support was provided by 10.13039/501100022591The Energy Technology Development and Demonstration Programme, Grant no. 64019-0514. Christian Krogh reports financial support was provided by 10.13039/501100022591The Energy Technology Development and Demonstration Programme, Grant no. 64019-0514.
(© 2023 The Authors.)

Photolithography is the foundational process at the root of micro-electromechanical (MEMS) and microfluidic systems manufacture. The process is descendant from the semiconductor industry, originating from printed circuit board and microprocessor fabrication, itself historically performed in a cleanroom environment utilizing expensive, specialist microfabrication equipment. Consequently, these conditions prove cost-prohibitive and pose a large barrier to entry. We present a novel homebrew, "do-it-yourself" method for performing photolithography to produce master mold wafers using only household appliances and homemade equipment at the bench side, outside of a cleanroom, producing a range of designs including spiral, serpentine, rectangular, and circulatory. Our homebrew processes result in the production of microfluidic channels with feature resolution of ∼85 μm width and 50 μm height utilizing inkjet-printed photomasks on transparency film to expose dry-film photoresist. From start to finish, the entire process takes under <90 min and costs <£300. With SU8 epoxy negative photoresist and a chrome photomask, our low-cost UV exposure apparatus and homemade spincoater could be used to produce PDMS devices containing large arrays of identical microwells measuring 4.4 μm in diameter. We show that our homebrew method produces both rectangular and spiral microfluidic channels with better results than can be achieved by SLA 3D printing by comparison, and amenable to bonding into multilayer functional microfluidic devices. As these methods are fundamental to microfluidics manufacture, we envision that this work will be of value to researchers across a broad range of disciplines, such as those working in resource-constrained countries or conditions, with many and widely varying applications.
Competing Interests: The authors declare no competing financial interest.
(© 2023 The Authors. Published by American Chemical Society.)

Models of urea kinetics facilitate a mechanistic understanding of urea transfer and provide a tool for optimizing dialysis efficacy. Dual-compartment models have largely replaced single-compartment models as they are able to accommodate the urea rebound on the cessation of dialysis. Modeling the kinetics of urea and other molecular species is frequently regarded as a rarefied academic exercise with little relevance at the bedside. We demonstrate the utility of System Dynamics in creating multi-compartment models of urea kinetics by developing a dual-compartment model that is efficient, intuitive, and widely accessible to a range of practitioners. Notwithstanding its simplicity, we show that the System Dynamics model compares favorably with the performance of a more complex volume-average model in terms of calibration to clinical data and parameter estimation. Its intuitive nature, ease of development/modification, and excellent performance with real-world data may make System Dynamics an invaluable tool in widening the accessibility of hemodialysis modeling.
(© 2023. The Author(s).)

Optical sensing offers several advantages owing to its non-invasiveness and high sensitivity. The miniaturization of optical sensors will mitigate spatial and weight constraints, expanding their applications and extending the principal advantages of optical sensing to different fields, such as healthcare, Internet of Things, artificial intelligence, and other aspects of society. In this study, we present the development of a miniature optical sensor for monitoring thrombi in extracorporeal membrane oxygenation (ECMO). The sensor, based on a complementary metal-oxide semiconductor integrated circuit (CMOS-IC), also serves as a photodiode, amplifier, and light-emitting diode (LED)-mounting substrate. It is sized 3.8 × 4.8 × 0.75 mm 3 and provides reflectance spectroscopy at three wavelengths. Based on semiconductor and microelectromechanical system (MEMS) processes, the design of the sensor achieves ultra-compact millimeter size, customizability, prototyping, and scalability for mass production, facilitating the development of miniature optical sensors for a variety of applications.

Since temperature and its spatial, and temporal variations affect a wide range of physical properties of material systems, they can be used to create reconfigurable spatial structures of various types in physical and biological objects. This paper presents an experimental optical setup for creating tunable two-dimensional temperature patterns on a micrometer scale. As an example of its practical application, we have produced temperature-induced magnetization landscapes in ferrimagnetic yttrium iron garnet films and investigated them using micro-focused Brillouin light scattering spectroscopy. It is shown that, due to the temperature dependence of the magnon spectrum, spatial temperature distributions can be visualized even for microscale thermal patterns.
(© 2023 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).)

Animals, Antivenins therapeutic use, Antibodies, Monoclonal therapeutic use, Snake Bites diagnosis, Snake Bites drug therapy, Crotalid Venoms therapeutic use, and Bothrops

Background: Brazil is home to a multitude of venomous snakes; perhaps the most medically relevant of which belong to the Bothrops genus. Bothrops spp. are responsible for roughly 70% of all snakebites in Brazil, and envenomings caused by their bites can be treated with three types of antivenom: bothropic antivenom, bothro-lachetic antivenom, and bothro-crotalic antivenom. The choice to administer antivenom depends on the severity of the envenoming, while the choice of antivenom depends on availability and on how certain the treating physician is that the patient was bitten by a bothropic snake. The diagnosis of a bothropic envenoming can be made based on expert identification of the dead snake or a photo thereof or based on a syndromic approach wherein the clinician examines the patient for characteristic manifestations of envenoming. This approach can be very effective but requires staff that has been trained in clinical snakebite management, which, unfortunately, far from all relevant staff has.
Results: In this article, we describe a prototype of the first lateral flow assay (LFA) capable of detecting venoms from Brazilian Bothrops spp. The monoclonal antibodies for the assay were generated using hybridoma technology and screened in sandwich enzyme-linked immunosorbent assays (ELISAs) to identify Bothrops spp.-specific antibody sandwich pairs. The prototype LFA is able to detect venom from several Bothrops spp. The LFA has a limit of detection (LoD) of 9.5 ng/mL in urine, when read with a commercial reader, and a visual LoD of approximately 25 ng/mL.
Significance: The work presented here serves as a proof of concept for a genus-specific venom detection kit that could support physicians in diagnosing Bothrops envenomings. Although further optimisation and testing is needed before the LFA can find clinical use, such a device could aid in decentralising antivenoms in the Brazilian Amazon and help ensure optimal snakebite management for even more victims of this highly neglected disease.
Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Cecilie Knudsen, Jonas A. Jürgensen, Søren H. Dam, Aleksander M. Haack, Rasmus U. W. Friis, and Andreas H. Laustsen are co-founders of VenomAid Diagnostics A/S. Jonas A. Jürgensen, Pelle D. Knudsen, and Georgina M. Ross are employed by VenomAid Diagnostics A/S. Cecilie Knudsen is an industrial PhD student at the Technical University of Denmark. Her PhD is co-sponsored by Innovation Fund Denmark and BioPorto Diagnostics A/S. Cecilie Knudsen, Jonas A. Jürgensen, Søren H. Dam, Aleksander M. Haack, Rasmus U. W. Friis, and Andreas H. Laustsen have been designated as inventors on a patent application related to the work presented here.
(Copyright © 2023 The Author(s). Published by Elsevier B.V. All rights reserved.)

Humans, Prospective Studies, Fatigue, Educational Status, Psychiatry, and Military Personnel

Background: Military service inherently includes frequent periods of high-stress training, operational tempo, and sustained deployments to austere far-forward environments. These occupational requirements can contribute to acute and chronic sleep disruption, fatigue, and behavioral health challenges related to acute and chronic stress and disruption of team dynamics. To date, there is no centralized mobile health platform that supports self- and supervised detection, monitoring, and management of sleep and behavioral health issues in garrison and during and after deployments.
Objective: The objective of this study was to adapt a clinical decision support platform for use outside clinical settings, in garrison, and during field exercises by medics and soldiers to monitor and manage sleep and behavioral health in operational settings.
Methods: To adapt an existing clinical decision support digital health platform, we first gathered system, content, and context-related requirements for a sleep and behavioral health management system from experts. Sleep and behavioral health assessments were then adapted for prospective digital data capture. Evidence-based and operationally relevant educational and interventional modules were formatted for digital delivery. These modules addressed the management and mitigation of sleep, circadian challenges, fatigue, stress responses, and team communication. Connectivity protocols were adapted to accommodate the absence of cellular or Wi-Fi access in deployed settings. The resulting apps were then tested in garrison and during 2 separate field exercises.
Results: Based on identified requirements, 2 Android smartphone apps were adapted for self-monitoring and management for soldiers (Soldier app) and team supervision and intervention by medics (Medic app). A total of 246 soldiers, including 28 medics, received training on how to use the apps. Both apps function as expected under conditions of limited connectivity during field exercises. Areas for future technology enhancement were also identified.
Conclusions: We demonstrated the feasibility of adapting a clinical decision support platform into Android smartphone-based apps to collect, save, and synthesize sleep and behavioral health data, as well as share data using adaptive data transfer protocols when Wi-Fi or cellular data are unavailable. The AIRE (Autonomous Connectivity Independent System for Remote Environments) prototype offers a novel self-management and supervised tool to augment capabilities for prospective monitoring, detection, and intervention for emerging sleep, fatigue, and behavioral health issues that are common in military and nonmilitary high-tempo occupations (eg, submarines, long-haul flights, space stations, and oil rigs) where medical expertise is limited.
(©Anne Germain, Megan Wolfson, I Wayan Pulantara, Meredith L Wallace, Katie Nugent, George Mesias, Kristina Clarke-Walper, Phillip J Quartana, Joshua Wilk. Originally published in the Journal of Medical Internet Research (https://www.jmir.org), 28.08.2023.)

Humans, Employment, and User-Centered Design

This paper presents elements of user-centered design and prototyping of a serious game. Produced within the framework of the SG-HANDI project, the serious game aims to raise awareness about integration, prevention of professional displacement and job retention of people with disabilities. This serious game is developed on an interactive RFID tabletop with tangible objects. It is intended to be used in a collective context involving one or more facilitators specialized in employment and disability, as well as the company's stakeholders to be made aware of the issue.

Lab-On-A-Chip Devices, Microfluidics, and Nucleic Acid Amplification Techniques methods

In this work, we demonstrate an inexpensive method of prototyping microfluidics using a desktop injection molding machine. A centrifugal microfluidic device with a novel central filling mechanism was developed to demonstrate the technique. We overcame the limitations of desktop machines in replicating microfluidic features by variotherm heating and cooling the mold between 50 °C and 110 °C within two minutes. Variotherm heating enabled good replication of microfeatures, with a coefficient of variation averaging only 3.6% attained for the measured widths of 100 μm wide molded channels. Using this methodology, we produced functional polystyrene centrifugal microfluidic chips, capable of aliquoting fluids into 5.0 μL reaction chambers with 97.5% accuracy. We performed allele-specific loop-mediated isothermal amplification (AS-LAMP) reactions for genotyping CYP2C19 alleles on these chips. Readouts were generated using optical pH sensors integrated onto chips, by drop-casting sensor precursor solutions into reaction chambers before final chip assembly. Positive reactions could be discerned by decreases in pH sensor fluorescence, thresholded against negative control reactions lacking the primers for nucleic acid amplification and with time-to-results averaging 38 minutes. Variotherm desktop injection molding can enable researchers to prototype microfluidic devices more cost-effectively, in an iterative fashion, due to reduced costs of smaller, in-house molds. Designs prototyped this way can be directly translated to mass production, enhancing their commercialization potential and positive impacts.

Three-dimensional printing technology has been used for more than three decades in many industries, including the automotive and aerospace industries. So far, the use of this technology in medicine has been limited only to 3D printing of anatomical models for educational and training purposes, which is due to the insufficient functional properties of the materials used in the process. Only recent advances in the development of innovative materials have resulted in the flourishing of the use of 3D printing in medicine and pharmacy. Currently, additive manufacturing technology is widely used in clinical fields. Rapid development can be observed in the design of implants and prostheses, the creation of biomedical models tailored to the needs of the patient and the bioprinting of tissues and living scaffolds for regenerative medicine. The purpose of this review is to characterize the most popular 3D printing techniques.

The increasing demand for seafood is responsible for many environmental impacts, especially caused by aquaculture. Shrimp accounts for a substantial part of seafood production and therefore also for negative effects associated with it. This work aimed to develop a mushroom-based shrimp analogue with a texture similar to shrimp using the fruiting bodies of pink oyster mushroom ( Pleurotus djamor ) and lion's mane ( Hericium erinaceus ). Three flushes of pink oyster mushrooms and a first flush of lion's mane mushroom were analysed regarding their nutritional composition and whether they are suitable shrimp alternatives. The two mushrooms are rich in proteins (∼32% and ∼26% w/w for the first flush of pink oyster and lion's mane, respectively). The protein content of pink oyster mushroom decreased and the dietary fibre content increased across the different flushes. The antioxidants in the mushrooms were extracted using different methods, whereby aqueous extracts mostly excelled in terms of antioxidant activity. Hydrolysis confirmed the presence of conjugated p -coumaric acid in both mushrooms and possibly conjugated caffeic acid in pink oyster. Texture analysis results of the prototypes were close to the values of fried shrimp. However, although the sensory qualities of the final prototypes were perceived as similar to shrimp, further improvements in the recipe are necessary to make the prototypes indistinguishable from shrimp.
Competing Interests: None.
(© 2023 The Author(s).)

This study proposes a design approach and the development of a low-power planar biped robot named YU-Bibot. The kinematic structure of the robot consists of six independently driven axes, and it weighs approximately 20 kg. Based on biomimetics, the robot dimensions were selected as the average anthropomorphic dimensions of the human lower extremities. The optimization of the mechanical design and actuator selection of the robot was based on the results of parametric simulations. The natural human walking gait was mimicked as a walking pattern in these simulations. As a result of the optimization, a low power-to-weight ratio of 30 W/kg was obtained. The drive system of the robot joints consists of servo-controlled brushless DC motors with reduction gears and additional bevel gears at the knee and ankle joints. The robot features spring-supported knee and ankle joints that counteract the robot's weight and compensate for the backlash present in these joints. The robot is constrained to move only in the sagittal plane by using a lateral support structure. The robot's feet are equipped with low-cost, force-sensitive resistor (FSR)-type sensors for monitoring ground contact and zero-moment point (ZMP) criterion. The experimental results indicate that the proposed robot mechanism can follow the posture commands accurately and demonstrate locomotion at moderate stability. The proposed parametric natural gait simulation-based design approach and the resulting biped robot design with a low power/weight ratio are the main contributions of this study.

Microfluidic devices have found extensive applications in mechanical, biomedical, chemical, and materials research. However, the high initial cost, low resolution, inferior feature fidelity, poor repeatability, rough surface finish, and long turn-around time of traditional prototyping methods limit their wider adoption. In this study, a strategic approach to a deterministic fabrication process based on in-situ image analysis and intermittent flow control called image-guided in-situ maskless lithography (IGIs-ML), has been proposed to overcome these challenges. By using dynamic image analysis and integrated flow control, IGIs-ML provides superior repeatability and fidelity of densely packed features across a large area and multiple devices. This general and robust approach enables the fabrication of a wide variety of microfluidic devices and resolves critical proximity effect and size limitations in rapid prototyping. The affordability and reliability of IGIs-ML make it a powerful tool for exploring the design space beyond the capabilities of traditional rapid prototyping.
(© 2023. The Author(s).)

In this work, we introduce a polymer version of a previously developed silicon MEMS drop deposition tool for surface functionalization that consists of a microcantilever integrating an open fluidic channel and a reservoir. The device is fabricated by laser stereolithography, which offers the advantages of low-cost and fast prototyping. Additionally, thanks to the ability to process multiple materials, a magnetic base is incorporated into the cantilever for convenient handling and attachment to the holder of a robotized stage used for spotting. Droplets with diameters ranging from ∼50 µm to ∼300 µm are printed upon direct contact of the cantilever tip with the surface to pattern. Liquid loading is achieved by fully immersing the cantilever into a reservoir drop, where a single load results in the deposition of more than 200 droplets. The influences of the size and shape of the cantilever tip and the reservoir on the printing outcome are studied. As a proof-of-concept of the biofunctionalization capability of this 3D printed droplet dispenser, microarrays of oligonucleotides and antibodies displaying high specificity and no cross-contamination are fabricated, and droplets are deposited at the tip of an optical fiber bundle.
Competing Interests: Conflict of interestThe authors declare no competing interests.
(© The Author(s) 2023.)

Animals, Bayes Theorem, Uncertainty, and Anthozoa

Emerging diseases can have devastating consequences for wildlife and require a rapid response. A critical first step towards developing appropriate management is identifying the etiology of the disease, which can be difficult to determine, particularly early in emergence. Gathering and synthesizing existing information about potential disease causes, by leveraging expert knowledge or relevant existing studies, provides a principled approach to quickly inform decision-making and management efforts. Additionally, updating the current state of knowledge as more information becomes available over time can reduce scientific uncertainty and lead to substantial improvement in the decision-making process and the application of management actions that incorporate and adapt to newly acquired scientific understanding. Here we present a rapid prototyping method for quantifying belief weights for competing hypotheses about the etiology of disease using a combination of formal expert elicitation and Bayesian hierarchical modeling. We illustrate the application of this approach for investigating the etiology of stony coral tissue loss disease (SCTLD) and discuss the opportunities and challenges of this approach for addressing emergent diseases. Lastly, we detail how our work may apply to other pressing management or conservation problems that require quick responses. We found the rapid prototyping methods to be an efficient and rapid means to narrow down the number of potential hypotheses, synthesize current understanding, and help prioritize future studies and experiments. This approach is rapid by providing a snapshot assessment of the current state of knowledge. It can also be updated periodically (e.g., annually) to assess changes in belief weights over time as scientific understanding increases. Synthesis and applications: The rapid prototyping approaches demonstrated here can be used to combine knowledge from multiple experts and/or studies to help with fast decision-making needed for urgent conservation issues including emerging diseases and other management problems that require rapid responses. These approaches can also be used to adjust belief weights over time as studies and expert knowledge accumulate and can be a helpful tool for adapting management decisions.
Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
(Copyright © 2023 Elsevier Ltd. All rights reserved.)

Background: Design dynamics that evolve during a designer's prototyping process encapsulate important insights about the way the designer is using his or her knowledge, creativity, and reflective thinking. Nevertheless, the capturing of such dynamics is not always an easy task, as they are built through alternations between the self-first and self-third person views.
Objective: This study aimed at introducing a conceptual framework, namely 2D-ME, to provide an explainable domain that could express the dynamics across the design timeline during a prototyping process of serious games.
Methods: Within the 2D-ME framework, the Technological-Pedagogical-Content Knowledge (TPACK), its adaptation to the serious games (TPACK-Game), and the activity theory frameworks were combined to produce dynamic constructs that incorporate self-first and self-third person extension of the TPACK-Game to Games TPACK, rules, division of labor, and object. The dynamic interplay between such constructs was used as an adaptation engine within an optimization prototype process, so each sequential version of the latter could converge to the designer's initial idea of the serious game. Moreover, higher-order thinking is scaffolded with the internal Activity Interview Script proposed in this paper.
Results: An experimental case study of the application of the 2D-ME conceptual framework in the design of a light reflection game was showcased, revealing all the designer's dynamics, both from internal (via a diary) and external (via the prototype version) views. The findings of this case study exemplified the convergence of the prototyping process to an optimized output, by minimizing the mean square error between the conceptual (initial and updated) idea of the prototype, following explainable and tangible constructs within the 2D-ME framework.
Conclusions: The generic structure of the proposed 2D-ME framework allows its transferability to various levels of expertise in serious games mastering, and it is used both for the designer's process exploration and training of the novice ones.
(©Sofia Hadjileontiadou, Sofia B Dias, Leontios Hadjileontiadis. Originally published in JMIR Serious Games (https://games.jmir.org), 24.04.2023.)

Green Fluorescent Proteins chemistry, Green Fluorescent Proteins genetics, Biosynthetic Pathways, Metabolic Engineering methods, Nicotinamide Mononucleotide biosynthesis, Enzymes chemistry, and Enzymes genetics

Engineering biological systems to test new pathway variants containing different enzyme homologs is laborious and time-consuming. To tackle this challenge, a strategy was developed for rapidly prototyping enzyme homologs by combining cell-free protein synthesis (CFPS) with split green fluorescent protein (GFP). This strategy featured two main advantages: (1) dozens of enzyme homologs were parallelly produced by CFPS within hours, and (2) the expression level and activity of each homolog was determined simultaneously by using the split GFP assay. As a model, this strategy was applied to optimize a 3-step pathway for nicotinamide mononucleotide (NMN) synthesis. Ten enzyme homologs from different organisms were selected for each step. Here, the most productive homolog of each step was identified within 24 h rather than weeks or months. Finally, the titer of NMN was increased to 1213 mg/L by improving physiochemical conditions, tuning enzyme ratios and cofactor concentrations, and decreasing the feedback inhibition, which was a more than 12-fold improvement over the initial setup. This strategy would provide a promising way to accelerate design-build-test cycles for metabolic engineering to improve the production of desired products.
(© 2023 Wiley Periodicals LLC.)

Two antimicrobial agents such as silver nanoparticles (AgNPs) and titanium dioxide (TiO 2 ) have been formulated with natural polysaccharides (chitosan or alginate) to develop innovative inks for the rapid, customizable, and extremely accurate manufacturing of 3D-printed scaffolds useful as dressings in the treatment of infected skin wounds. Suitable chemical-physical properties for the applicability of these innovative devices were demonstrated through the evaluation of water content (88-93%), mechanical strength (Young's modulus 0.23-0.6 MPa), elasticity, and morphology. The antimicrobial tests performed against Staphylococcus aureus and Pseudomonas aeruginosa demonstrated the antimicrobial activities against Gram+ and Gram- bacteria of AgNPs and TiO 2 agents embedded in the chitosan (CH) or alginate (ALG) macroporous 3D hydrogels (AgNPs MIC starting from 5 µg/mL). The biocompatibility of chitosan was widely demonstrated using cell viability tests and was higher than that observed for alginate. Constructs containing AgNPs at 10 µg/mL concentration level did not significantly alter cell viability as well as the presence of titanium dioxide; cytotoxicity towards human fibroblasts was observed starting with an AgNPs concentration of 100 µg/mL. In conclusions, the 3D-printed dressings developed here are cheap, highly defined, easy to manufacture and further apply in personalized antimicrobial medicine applications.

This study aims to describe the prototype development and testing of a serious game designed for Brazilian children with diabetes. Following an approach of user-centered design, the researchers assessed game's preferences and diabetes learning needs to develop a Paper Prototype. The gameplay strategies included diabetes pathophysiology, self-care tasks, glycemic management, and food group learning. Diabetes and technology experts (n = 12) tested the prototype during audio-recorded sessions. Next, they answered a survey to evaluate the content, organization, presentation, and educational game aspects. The prototype showed a high content validity ratio (0.80), with three items not achieving the critical values (0.66). Experts recommended improving the game content and food illustrations. This evaluation contributed to the medium-fidelity prototype version, which after testing with diabetes experts (n = 12) achieved high content validity values (0.88). One item did not meet the critical values. Experts suggested increasing the options of outdoor activities and meals. Researchers also observed and video-recorded children with diabetes (n = 5) playing the game with satisfactory interaction. They considered the game enjoyable. The interdisciplinary team plays an important role guiding the designers in the use of theories and real needs of children. Prototypes are a low-cost usability and a successful method for evaluating games.
(Copyright © 2023 Wolters Kluwer Health, Inc. All rights reserved.)

Biotechnology, Microtechnology, Printing, Three-Dimensional, Microfluidics methods, and Cell Culture Techniques

Rapid prototyping of microfluidic chips is a key enabler for controlled biotechnology applications in microspaces, as it allows for the efficient design and production of microfluidic systems. With rapid prototyping, researchers and engineers can quickly create and test new microfluidic chip designs, which can then be optimized for specific applications in biotechnology. One of the key advantages of microfluidic chips for biotechnology is the ability to manipulate and control biological samples in a microspace, which enables precise and controlled experiments under well-defined conditions. This is particularly useful for applications such as cell culture, drug discovery, and diagnostic assays, where precise control over the biological environment is crucial for obtaining accurate results. Established methods, for example, soft lithography, 3D printing, injection molding, as well as other recently highlighted innovative approaches, will be compared and challenges as well as limitations will be discussed. It will be shown that rapid prototyping of microfluidic chips enables the use of advanced materials and technologies, such as smart materials and digital sensors, which can further enhance the capabilities of microfluidic systems for biotechnology applications. Overall, rapid prototyping of microfluidic chips is an important enabling technology for controlled biotechnology applications in microspaces, as well as for upscaling it into macroscopic bioreactors, and its continued development and improvement will play a critical role in advancing the field. The review will highlight recent trends in terms of materials and competing approaches and shed light on current challenges on the way toward integrated microtechnologies. Also, the possibility to easy and direct implementation of novel functions (membranes, functionalization of interfaces, etc.) is discussed.
Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
(Copyright © 2023 Elsevier Ltd. All rights reserved.)

Three-dimensional (3D) printing technology is advantageous in the fast prototyping of complex structures, but its utilization in functional material fabrication is still limited due to a lack of activation capability. To fabricate and activate the functional material of electrets, a synchronized 3D printing and corona charging method is presented to prototype and polarize polylactic acid electrets in one step. By upgrading the 3D printer nozzle and incorporating a needle electrode to apply high voltage, parameters such as needle tip distance and applied voltage level were compared and optimized. Under different experimental conditions, the average surface distribution in the center of the samples was -1498.87 V, -1115.73 V, and -814.51 V. Scanning electron microscopy results showed that the electric field contributes to keeping the printed fiber structure straight. The polylactic acid electrets exhibited relatively uniform surface potential distribution on a sufficiently large sample surface. In addition, the average surface potential retention rate was improved by 12.021-fold compared to ordinary corona-charged samples. The above advantages are unique to the 3D-printed and polarized polylactic acid electrets, proving that the proposed method is suitable for quickly prototyping and effectively polarizing the polylactic acid electrets simultaneously.

Female, Humans, Spectroscopy, Fourier Transform Infrared, Fluorouracil, Polyesters, and Uterine Cervical Neoplasms drug therapy

Solid lipid nanoparticles (SLNs) are used extensively to achieve site-specific drug delivery with improved bioavailability and reduced toxicity. This work focused on a new approach to provide site-specific stimuli-responsive delivery of SLNs loaded within thermo-sonic nano-organogel (TNO) variants to deliver the model chemotherapeutic agent 5-FU in treating cervical cancer. Pharmaceutically stable nanospherical SLNs comprising poly-L-lactic acid (PLA), palmitic acid (PA), and polyvinyl alcohol (PVA) were prepared and incorporated into TNO variants augmented by external thermal and ultrasound stimuli for release of 5-FU in the cervix. Results revealed that rate-modulated 5-FU release was achieved from SLNs (particle size =450.9 nm; PDI =0.541; zeta potential =-23.2 mV; %DL =33%) within an organogel upon exposure to either a single (thermo-) and/or both (thermo-sonic) stimuli. 5FU was released from all TNO variants with an initial burst on day 1 followed by sustained release over 14 days. TNO 1 provided desirable release over 15 days (44.29% vs. 67.13% under single (T) or combined (TU) stimuli, respectively). Release rates were primarily influenced by the SLN:TO ratio in tandem with biodegradation and hydrodynamic influx. Biodegradation by day 7 revealed that variant TNO 1 (1:5) released 5FU (46.8%) analogous to its initial mass than the other TNO variants (i.e., ratios of 2:5 and 3:5). FT-IR spectra revealed assimilation of the system components and corroborative with the DSC and XRD analysis (i.e., in ratios of PA:PLA 1:1 and 2:1). In conclusion, the TNO variants produced may be used as a potential stimuli-responsive platform for the site-specific delivery of chemotherapeutic agents such as 5-FU to treat cervical cancer.
(© 2023. The Author(s).)

Humans, Porosity, Electrodes, and Graphite

Flexible pressure sensors are widely applied in tactile perception, fingerprint recognition, medical monitoring, human-machine interfaces, and the Internet of Things. Among them, flexible capacitive pressure sensors have the advantages of low energy consumption, slight signal drift, and high response repeatability. However, current research on flexible capacitive pressure sensors focuses on optimizing the dielectric layer for improved sensitivity and pressure response range. Moreover, complicated and time-consuming fabrication methods are commonly applied to generate microstructure dielectric layers. Here, we propose a rapid and straightforward fabrication approach to prototyping flexible capacitive pressure sensors based on porous electrodes. Laser-induced graphene (LIG) is produced on both sides of the polyimide paper, resulting in paired compressible electrodes with 3D porous structures. When the elastic LIG electrodes are compressed, the effective electrode area, the relative distance between electrodes, and the dielectric property vary accordingly, thereby generating a sensitive pressure sensor in a relatively large working range (0-9.6 kPa). The sensitivity of the sensor is up to 7.71%/kPa -1 , and it can detect pressure as small as 10 Pa. The simple and robust structure allows the sensor to produce quick and repeatable responses. Our pressure sensor exhibits broad potential in practical applications in health monitoring, given its outstanding comprehensive performance combined with its simple and quick fabrication method.

Lab-On-A-Chip Devices, Polymers, Dimethylpolysiloxanes, and Microtechnology

Polydimethylsiloxane (PDMS) based microfluidic devices have found increasing utility for electrophoretic and electrokinetic assays because of their ease of fabrication using replica molding. However, the fabrication of high-resolution molds for replica molding still requires the resource-intensive and time-consuming photolithography process, which precludes quick design iterations and device optimization. We here demonstrate a low-cost, rapid microfabrication process, based on electrohydrodynamic jet printing (EJP), for fabricating non-sacrificial master molds for replica molding of PDMS microfluidic devices. The method is based on the precise deposition of an electrically stretched polymeric solution of polycaprolactone in acetic acid on a silicon wafer placed on a computer-controlled motion stage. This process offers the high-resolution (order 10  μ $\umu$ m) capability of photolithography and rapid prototyping capability of inkjet printing to print high-resolution templates for elastomeric microfluidic devices within a few minutes. Through proper selection of the operating parameters such as solution flow rate, applied electric field, and stage speed, we demonstrate microfabrication of intricate master molds and corresponding PDMS microfluidic devices for electrokinetic applications. We demonstrate the utility of the fabricated PDMS microchips for nonlinear electrokinetic processes such as electrokinetic instability and controlled sample splitting in ITP. The ability to rapid prototype customized reusable master molds with order 10  μ $\umu$ m resolution within a few minutes can help in designing and optimizing microfluidic devices for various electrokinetic applications.
(© 2023 Wiley-VCH GmbH.)

Because they are made of elastically deformable and compliant materials, soft robots can passively change shape and conform to their environment, providing potential advantages over traditional robotics approaches. However, existing manufacturing workflows are often labor intensive and limited in their ability to create highly integrated three-dimensional (3D) heterogeneous material systems. In this study, we address this with a streamlined workflow to produce field-deployable soft robots based on 3D printing with digital light processing (DLP) of silicone-like soft materials. DLP-based 3D printing is used to create soft actuators (2.2 g) capable of exerting up to 0.5 Newtons of force that are integrated into a bioinspired untethered soft robot. The robot walks underwater at speeds comparable with its biological analog, the brittle star. Using a model-free planning algorithm and feedback, the robot follows remote commands to move to desired positions. Moreover, we show that the robot is able to perform untethered locomotion outside of a laboratory and in a natural aquatic environment. Our results represent progress in soft robot manufacturing autonomy for a 3D printed untethered soft robot.

A flexible power electronic converter embedding a rapid control prototyping platform suitable to be applied in research test setups and teaching laboratories is proposed and described in this paper. The electronic system is composed of three subsystems, namely, i ) three half-bridge power boards, ii ) a dc-link capacitor bank with a half-bridge power module for active dc-link control, iii ) an interfacing board, called motherboard, to couple the power modules with a control unit, iv ) a digital control unit with rapid control prototyping functionalities for controlling power electronic circuits. Power modules integrate sensors with related conditioning circuits, driving circuits for power switches, and protection circuits. Conversion circuits exploit GaN electronic switches for optimal performance. The architecture and implementation of the system are described in detail in this manuscript. Main applications are in the implementation of conversion circuits for supplying arbitrary ac or dc voltages or currents, testing of new control algorithms for power electronic converters, testing of systems of electronic converters in, for example, smart nanogrids or renewable energy applications, training of undergraduate and graduate students.
Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
(© 2023 The Author(s).)

This study presents a robustness optimization method for rapid prototyping (RP) of functional artifacts based on visualized computing digital twins (VCDT). A generalized multiobjective robustness optimization model for RP of scheme design prototype was first built, where thermal, structural, and multidisciplinary knowledge could be integrated for visualization. To implement visualized computing, the membership function of fuzzy decision-making was optimized using a genetic algorithm. Transient thermodynamic, structural statics, and flow field analyses were conducted, especially for glass fiber composite materials, which have the characteristics of high strength, corrosion resistance, temperature resistance, dimensional stability, and electrical insulation. An electrothermal experiment was performed by measuring the temperature and changes in temperature during RP. Infrared thermographs were obtained using thermal field measurements to determine the temperature distribution. A numerical analysis of a lightweight ribbed ergonomic artifact is presented to illustrate the VCDT. Moreover, manufacturability was verified based on a thermal-solid coupled finite element analysis. The physical experiment and practice proved that the proposed VCDT provided a robust design paradigm for a layered RP between the steady balance of electrothermal regulation and manufacturing efficacy under hybrid uncertainties.
(© 2023. The Author(s).)

Hydrodynamics, Kinetics, Ultraviolet Rays, Disinfection methods, and Water Purification methods

We developed and studied one of the first high-flow UV-LED water disinfection reactors applicable to point-of-entry (POE) water disinfection. A multiphysics computational model was created to predict the performance of UV reactor design concepts by modeling the synergic effect of radiation, hydrodynamics, and the inactivation kinetics of microorganisms. The geometrical optics that describe light propagation in terms of rays were employed to model the radiation profile of multiple UV-LEDs with optical components in complex reactor geometries, the first account of such an approach. The computational solution of the mass, momentum, and species equations was applied to model the hydrodynamics and kinetics. We designed a reactor through a detailed computational study of the optical and hydrodynamic performance of various design strategies. Highly efficient UV fluence distribution in the reactor was achieved by creating nearly collimated UV radiation beams across the reactor and managing the hydrodynamics using a flow distributor. We fabricated a prototype of the optimized reactor design for experimental studies. Biodosimetry tests were conducted for various flow rates and UV transmittances (UVTs), and the experimental results were compared with the model predictions. The design, which employed 14 UV-LEDs assembled over custom-made optical modules, resulted in a reduction equivalent dose (RED) of 65 mJ/cm 2 at a flow rate of 20 liters per minute (LPM) while consuming about 50 W energy. This reactor design required only 0.05 W radiant power per LPM flow rate to achieve an NSF Class A UV dose equivalent of 40 mJ/cm 2 . The findings of this study provide insights into UV-LED reactor development strategies as well as the creation and application of reactor virtual prototyping tools for designing and optimizing highly efficient UV-LED reactors.
Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
(Copyright © 2023. Published by Elsevier Ltd.)

Following COVID-19, the global educational landscape shifted dramatically. Almost every educational institute in Bangladesh undertook a strategic move to begin offering online or blended learning courses to mitigate the challenges created by the pandemic. The TVET sector, particularly the polytechnic institute of Bangladesh, endeavored to explore the blended learning approach as an immediate and long-term solution to address the educational dislocation caused by the pandemic. This study attempts to conceptualize a pedagogical design based on the ADDIE and rapid prototyping model to make a reliable and robust instructional design to be used in the blended learning context. A content validity index (CVI) was used to validate the proposed model; a technology acceptance model (TAM) was employed to examine its acceptability to students; and finally, students' academic performances were analysed to evaluate the overall performance of the proposed instructional design. The findings reveal that the proposed instructional design can be a reliable and valid pedagogical approach to be implemented in the blended learning context for polytechnic students. The proposed instructional design may help TVET educators and course designers to create a robust blended learning environment in the TVET sector and in other similar disciplines, such as science and engineering education.
Competing Interests: Conflict of interestThe authors declare no competing interests.
(© The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature 2022, Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.)

Direct-write printing has contributed tremendously to additive manufacturing; in particular extrusion based printing where it has extended the range of materials for 3D printing and thus enabled use across many more sectors. The printing inks for direct-write printing however, need careful synthesis and invariably undergo extensive preparation before being able to print. Hence, new ink synthesis efforts are required every time a new material is to be printed; this is particularly challenging for low storage modulus (G') materials like silicones, especially at higher resolutions (under 10 µm). Here we report the development of a precise (< 10 µm) 3D printable polymer, with which we 3D print micromoulds which are filled with standard silicones like polydimethylsiloxane (PDMS) and left to cure at room temperature. The proof of concept is demonstrated using a simple water soluble polymer as the mould material. The approach enables micrometre scale silicone structures to be prototyped with ease, away from the cleanroom.
Competing Interests: The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Manish K. Tiwari reports financial support was provided by Wellcome EPSRC Centre for Interventional and Surgical Sciences. Manish K. Tiwari reports financial support was provided by European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme under grant agreement no. 714712. Saja Aabith reports financial support was provided by EPSRC DTP studentship award.
(© 2022 The Authors.)

As part of this work, polymer composites based on polycarbonate/acrylonitrile-butadiene-styrene (PC/ABS) were obtained and used in 3D printing technology, particularly Melted Extrusion Modeling (MEM) technology. The influence of selected fillers on the properties of the obtained composites was investigated. For this purpose, modified fillers such as silica modified with alumina, bentonite modified with a quaternary ammonium salt, and hybrid lignin/silicon dioxide filler were introduced into the PC/ABS matrix. In the first part of this work, polymer blends and their composites containing 1.5-3 wt. of the filler were used to obtain the filament using the proprietary technological line. Moldings for testing the performance properties were obtained using additive manufacturing techniques and injection molding. In the subsequent part of this work, rheological properties (mass flow rate (MFR) and viscosity curves) and mechanical properties (Rockwell hardness and static tensile strength with Young's modulus) were examined. The structures of the obtained composites were also determined by scanning electron microscopy (SEM/EDS). The obtained results confirmed the results obtained from a wide-angle X-ray scattering analysis (WAXS). In turn, the physicochemical properties were characterized on the basis of the results of tests using thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Based on the obtained results, it was found that the introduced modified additives had a significant impact on the processing and functional properties of the tested composites.

In this paper, we report a simple, rapid, low-cost, biocompatible, and detachable microfluidic chip fabrication method for customized designs based on Parafilm ® . Here, Parafilm ® works as both a bonding agent and a functional membrane. Its high ultimate tensile stress (3.94 MPa) allows the demonstration of high-performance actuators such as microvalves and micropumps. By laser ablation and the one-step bonding of multiple layers, 3D structured microfluidic chips were successfully fabricated within 2 h. The consumption time of this method (~2 h) was 12 times less than conventional photolithography (~24 h). Moreover, the shear stress of the PMMA-Parafilm ® -PMMA specimens (0.24 MPa) was 2.13 times higher than that of the PDMS-PDMS specimens (0.08 MPa), and 0.56 times higher than that of the PDMS-Glass specimens (0.16 MPa), showing better stability and reliability. In this method, multiple easily accessible materials such as polymethylmethacrylate (PMMA), PVC, and glass slides were demonstrated and well-incorporated as our substrates. Practical actuation devices that required high bonding strength including microvalves and micropumps were fabricated by this method with high performance. Moreover, the biocompatibility of the Parafilm ® -based microfluidic devices was validated through a seven-day E. coli cultivation. This reported fabrication scheme will provide a versatile platform for biochemical applications and point-of-care diagnostics.

Background: Shoulder dislocations are common occurrences, yet there are few simulation devices to train medical personnel on how to reduce these dislocations. Reductions require a familiarity with the shoulder and a nuanced motion against strong muscle tension. The goal of this work is to describe the design of an easily replicated, low-cost simulator for training shoulder reductions.
Materials and Methods: An iterative, stepwise engineering design process was used to design and implement ReducTrain. A needs analysis with clinical experts led to the selection of the traction-countertraction and external rotation methods as educationally relevant techniques to include. A set of design requirements and acceptance criteria was established that considered durability, assembly time, and cost. An iterative prototyping development process was used to meet the acceptance criteria. Testing protocols for each design requirement are also presented. Step-by-step instructions are provided to allow the replication of ReducTrain from easily sourced materials, including plywood, resistance bands, dowels, and various fasteners, as well as a 3D-printed shoulder model, whose printable file is included at a link in the Additional file 1: Appendix.
Results: A description of the final model is given. The total cost for all materials for one ReducTrain model is under US $200, and it takes about 3 h and 20 min to assemble. Based on repetitive testing, the device should not see any noticeable changes in durability after 1000 uses but may exhibit some changes in resistance band strength after 2000 uses.
Discussion: The ReducTrain device fills a gap in emergency medicine and orthopedic simulation. Its wide variety of uses points to its utility in several instructional formats. With the rise of makerspaces and public workshops, the construction of the device can be easily completed. While the device has some limitations, its robust design allows for simple upkeep and a customizable training experience.
Conclusion: A simplified anatomical design allows for the ReducTrain model to serve as a viable training device for shoulder reductions.
(© 2023. The Author(s).)

Humans, Communication, Software, and Language

Amidst the domestic labor shortage and worldwide pandemic in recent years, there has been an urgent need for a digital means that allows construction site workers, particularly site managers, to obtain information more efficiently in support of their daily managerial tasks. For workers who move around the site, traditional software applications that rely on a form-based interface and require multiple finger movements such as key hits and clicks can be inconvenient and reduce their willingness to use such applications. Conversational AI, also known as a chatbot, can improve the ease of use and usability of a system by providing an intuitive interface for user input. This study presents a demonstrative Natural Language Understanding (NLU) model and prototypes an AI-based chatbot for site managers to inquire about building component dimensions during their daily routines. Building Information Modeling (BIM) techniques are also applied to implement the answering module of the chatbot. The preliminary testing results show that the chatbot can successfully predict the intents and entities behind the inquiries raised by site managers with satisfactory accuracy for both intent prediction and the answer. These results provide site managers with alternative means to retrieve the information they need.

Electrons, Quantum Theory, and Software

Fanpy is a free and open-source Python library for developing and testing multideterminant wavefunctions and related ab initio methods in electronic structure theory. The main use of Fanpy is to quickly prototype new methods by making it easier to convert the mathematical formulation of a new wavefunction ansätze to a working implementation. Fanpy is designed based on our recently introduced Flexible Ansatz for N-electron Configuration Interaction (FANCI) framework, where multideterminant wavefunctions are represented by their overlaps with Slater determinants of orthonormal spin-orbitals. In the simplest case, a new wavefunction ansatz can be implemented by simply writing a function for evaluating its overlap with an arbitrary Slater determinant. Fanpy is modular in both implementation and theory: the wavefunction model, the system's Hamiltonian, and the choice of objective function are all independent modules. This modular structure makes it easy for users to mix and match different methods and for developers to quickly explore new ideas. Fanpy is written purely in Python with standard dependencies, making it accessible for various operating systems. In addition, it adheres to principles of modern software development, including comprehensive documentation, extensive testing, quality assurance, and continuous integration and delivery protocols. This article is considered to be the official release notes for the Fanpy library.
(© 2022 Wiley Periodicals LLC.)

Intelligent sensor systems are essential for building modern Internet of Things applications. Embedding intelligence within or near sensors provides a strong case for analog neural computing. However, rapid prototyping of analog or mixed signal spiking neural computing is a non-trivial and time-consuming task. We introduce mixed-mode neural computing arrays for near-sensor-intelligent computing implemented with Field-Programmable Analog Arrays (FPAA) and Field-Programmable Gate Arrays (FPGA). The combinations of FPAA and FPGA pipelines ensure rapid prototyping and design optimization before finalizing the on-chip implementations. The proposed approach architecture ensures a scalable neural network testing framework along with sensor integration. The experimental set up of the proposed tactile sensing system in demonstrated. The initial simulations are carried out in SPICE, and the real-time implementation is validated on FPAA and FPGA hardware.
Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.
(Copyright © 2023 Mallan, Gopi, Reghuvaran, Radhakrishnan and James.)

We demonstrate a method to emulate the optical performance of silicon photonic devices fabricated using advanced deep-ultraviolet lithography (DUV) processes on a rapid-prototyping electron-beam lithography process. The method is enabled by a computational lithography predictive model generated by processing SEM image data of the DUV lithography process. We experimentally demonstrate the emulation method's accuracy on integrated silicon Bragg grating waveguides and grating-based, add-drop filter devices, two devices that are particularly susceptible to DUV lithography effects. The emulation method allows silicon photonic device and system designers to experimentally observe the effects of DUV lithography on device performance in a low-cost, rapid-prototyping, electron-beam lithography process to enable a first-time-right design flow.

Dimethylpolysiloxanes, Microfluidics methods, and Microfluidic Analytical Techniques

Soft lithography has permitted rapid prototyping of precise microfluidic features by patterning a deformable elastomer such as polydimethylsiloxane (PDMS) with a photolithographically patterned mold. In microfluidics applications where the flexibility of PDMS is a drawback, a variety of more rigid materials have been proposed. Compared to alternatives, devices fabricated from epoxy and glass have superior mechanical performance, feature resolution, and solvent compatibility. Here we provide a detailed step-by-step method for fabricating rigid microfluidic devices from soft lithography patterned epoxy and glass. The bonding protocol was optimized yielding devices that withstand pressures exceeding 500 psi. Using this method, we demonstrate the use of rigid high aspect ratio spiral microchannels for high throughput cell focusing.
(© 2023. The Author(s).)

Humans, Pregnancy, Female, Pilot Projects, Feasibility Studies, Pregnancy Outcome, Life Change Events, and Prenatal Care

Background: A healthy lifestyle plays a key role in the prevention of lifestyle-related diseases, including subfertility and pregnancy complications. Although the benefits of a healthy lifestyle are well-known, long-term adherence is limited. Moreover, memory for lifestyle-related information as well as medical information provided by the medical professional is often poor and insufficient. In order to innovate and improve health care for both the patients and health care professionals, we developed a prototype of a digital life course care platform (Smarter Health app), providing personalized lifestyle care trajectories integrated in medical care journeys.
Objective: This pilot study aimed to evaluate the feasibility, defined as the actual app use, and the acceptability, which included patient satisfaction and appreciation, of the Smarter Health app.
Methods: Between March 17, 2021, and September 30, 2021, pregnant women familiar with the Dutch language seeking tertiary preconception and pregnancy care were offered the app as part of standard medical care at the outpatient clinic Healthy Pregnancy of the Department of Obstetrics and Gynecology of the Erasmus University Medical Center. Three months after activation of the app, patients received a digital questionnaire consisting of aspects of feasibility and acceptability.
Results: During this pilot study, 440 patients visited the outpatient clinic Healthy Pregnancy. Of the 440 patients, 293 (66.6%) activated the app. Of the 293 patients who activated the app, 125 (42.7%) filled out the questionnaire. Of these 125 patients, 48 (38.4%) used the app. Most app users used it occasionally and logged in 8 times during their medical care trajectory. Overall, app users were satisfied with the app (median 5-point Likert scale=2.4, IQR 2.0-3.3).
Conclusions: Our findings showed that the Smarter Health app, which integrates lifestyle care in medical care, is a feasible health care innovation, and that patients were satisfied with the app. Follow-up and evaluation of pregnancy outcomes should be performed to further substantiate wider clinical implementation.
(©Melissa van der Windt, Sofie Karolina Maria van Zundert, Sam Schoenmakers, Lenie van Rossem, Régine Patricia Maria Steegers-Theunissen. Originally published in the Journal of Medical Internet Research (https://www.jmir.org), 20.01.2023.)

Background: Diabetes is a global public health issue, causing burden on healthcare system and increasing risk of mortality. Mobile applications (apps) can be a promising approach to facilitate diabetes self-management. An increasingly utilized approach to facilitate engagement with mobile health (mHealth) technology is to involve potential users in the creation of the technology.
Objective: The aim of this study was to use co-design for type 2 diabetes mellitus (T2DM) self-management mHealth development.
Methods: Three rounds of iterative rapid prototyping panel sessions were conducted with a total of 9 T2DM participants in an Asian setting between Oct 2020 and April 2021. The participants were recruited through convenience sampling. For each round, feedback was gathered through qualitative interviews, and the feedback was used as a reference by the development team to develop and test a more refined version of the app in the next round. Transcribed semi-structured interview data was analyzed thematically using an inductive approach.
Results: Participants' ages ranged from 40 to 69 years. Data saturation was reached, with no new themes emerging from the data. During the sessions, the participants expressed a variety of concerns and feedback on T2DM self-management using EMPOWER app and raised suggestions on the features of ideal T2DM self-management app. Important features include 1) reminders and notifications for medications, 2) Bluetooth integration with glucometers and blood pressure machines to minimize manual entry, 3) enlarged local food database including information on sugar content and recommendations for healthier options, 4) one touch for logging of routine medications and favorite foods, 5) export function for data sharing with physicians. Overall inputs concerned aspects such as user-friendliness of the app, customization possibilities, and educational content for the features in the mobile app.
Conclusion: In this study, we explored users' opinions on a T2DM self-management mobile app using co-design approach. This study adds to the growing body of literature on co-designing behavioral mHealth interventions and can potentially guide researchers in mobile app design for other chronic conditions.
Competing Interests: The authors declare that they have no other competing interests.
(© 2023 Kwan et al.)

Microfluidics methods, Cell Encapsulation, Polymerase Chain Reaction, Microfluidic Analytical Techniques methods, and Microgels

Droplet microfluidics offers a platform from which new digital molecular assay, disease screening, wound healing and material synthesis technologies have been proposed. However, the current commercial droplet generation, assembly and imaging technologies are too expensive and rigid to permit rapid and broad-range tuning of droplet features/cargoes. This rapid prototyping bottleneck has limited further expansion of its application. Herein, an inexpensive home-made pipette droplet microfluidics kit is introduced. This kit includes elliptical pipette tips that can be fabricated with a simple DIY (Do-It-Yourself) tool, a unique tape-based or 3D printed shallow-center imaging chip that allows rapid monolayer droplet assembly/immobilization and imaging with a smart-phone camera or miniature microscope. The droplets are generated by manual or automatic pipetting without expensive and lab-bound microfluidic pumps. The droplet size and fluid viscosity/surface tension can be varied significantly because of our particular droplet generation, assembly and imaging designs. The versatility of this rapid prototyping kit is demonstrated with three representative applications that can benefit from a droplet microfluidic platform: (1) Droplets as microreactors for PCR reaction with reverse transcription to detect and quantify target RNAs. (2) Droplets as microcompartments for spirulina culturing and the optical color/turbidity changes in droplets with spirulina confirm successful photosynthetic culturing. (3) Droplets as templates/molds for controlled synthesis of gold-capped polyacrylamide/gold composite Janus microgels. The easily fabricated and user-friendly portable kit is hence ideally suited for design, training and educational labs.
(© 2023. The Author(s).)

Humans, Vertical Dimension, Composite Resins, Dental Occlusion, Denture, Partial, Removable, Anodontia, Mouth, Edentulous, and Jaw, Edentulous, Partially

Full-mouth rehabilitation can be challenging due to the complexity of restoring the vertical dimension of occlusion (VDO) and replacing missing teeth. In partially edentulous patients, the concept of a bonded composite resin prototype for increasing the VDO has previously been applied through the use of an overlay removable partial denture (RPD) with acrylic resin covering the existing dentition. Unfortunately, this type of prosthesis does not always accurately model the function and phonetics intended for the definitive prostheses, and the esthetic result often is less than ideal. It would be advantageous if direct bonding could be used with the patient's existing RPD to model the increased VDO, but this approach has not been reported in the literature. This case report describes the direct bonding of an existing RPD to create a prototype for increased VDO in a partially edentulous patient with a skeletal Class II malocclusion. The successful outcome has been maintained for more than 1 year.
Competing Interests: No conflicts of interest reported.

Equipment Design, Transducers, Printing, Three-Dimensional, Ultrasonography, Ultrasonics, and Ultrasonic Therapy

We present a rapid prototyping method for sub-megahertz single-element piezoelectric transducers by using 3D-printed components. In most of the early research phases of applying new sonication ideas, the prototyping quickness is prioritized over the final packaging quality, since the quickness of preliminary demonstration is crucial for promptly determining specific aims and feasible research approaches. We aim to develop a rapid prototyping method for functional ultrasonic transducers to overcome the current long lead time (>a few weeks). Here, we used 3D-printed external housing parts considering a single matching layer and either air backing or epoxy-composite backing (acoustic impedance > 5 MRayl). By molding a single matching layer on the top surface of a piezoceramic in a 3D-printed housing, an entire packaging time was significantly reduced (<26 h) compared to the conventional methods with grinding, stacking, and bonding. We demonstrated this prototyping method for 590-kHz single-element, rectangular-aperture transducers for moderate pressure amplitudes (mechanical index > 1) at focus with temporal pulse controllability (maximum amplitude by <5-cycle burst). We adopted an air-backing design (Type A) for efficient pressure outputs, and bandwidth improvement was tested by a tungsten-composite-backing (Type B) design. The acoustic characterization results showed that the type A prototype provided 3.3 kPa/Vpp far-field transmitting sensitivity with 25.3% fractional bandwidth whereas the type B transducer showed 2.1 kPa/Vpp transmitting sensitivity with 43.3% fractional bandwidth. As this method provided discernable quickness and cost efficiency, this detailed rapid prototyping guideline can be useful for early-phase sonication projects, such as multi-element therapeutic ultrasound array and micro/nanomedicine testing benchtop device prototyping.