articles+ search results

3dtechnology, pattern, prototyping, garment factories, virtual simulation), Fine Arts, Architecture, and NA1-9428

3D technology is considered one of the Pattern digital technologies that help this technology to increase, ease and speed of completion of industrial processes. This study deals with how to take advantage of 3D technology in developing the performance of the samples department in the technical department of ready-to-wear factories, in order to solve the problems of the samples section associated with the implementation of the 2D Pattern, as this problem was concluded through field study and practical experiences in ready-to-wear factories in Egypt.Controlling the fitting Pattern of clothes in the samples section faces many difficulties, the most important of which is the incompatibility of the industrial Pattern drawn with the human body “Pattern ". Where defects appeared in the product after conducting and implementing the first sample, which required making adjustments to the industrial Pattern and re-executing the sample a second time until it became free from defects and ready to perform the grading according to the measurements and the "order" of the operation order required to be executed to start production processes, which results in it. In the presence of lost time to implement the sample, as well as wasted effort, and wastes in the raw materials used in the implementation of the sample (fabric/ accessories / threads / and direct and indirect costs) that will be quantified after that.In order to find a solution to this problem, this research presents a case study using the "CLO5.1" program to improve the industrial Pattern in order to improve the quality of the male industrial Pattern drawing using 3D technology by making adjustments to some areas where the stress and stress ratios are high due to the lack of nan fitting of the Pattern. Industrial, which does not appear clearly even during implementation. The study concluded that the implementation of the CLO5.1 program in the sample section has succeeded in reducing the time wastage for sample production and the wastage of raw materials, thus reducing the cost of sample productionKey words :( 3Dtechnology ، pattern، Prototyping ، Garment Factories ،virtual simulation)

mineral fertilizers, energy-saving technologies, working tool, uniformity of distribution, 3d, cad model, prototyping, experimental research, Engineering (General). Civil engineering (General), TA1-2040, Technology (General), and T1-995

Introduction. Improvement of the agro-industrial complex involves the creation of new and modernizations of existing working tools and machines. The important conditions for this are the application of modern technologies and ongoing cooperation with the actual manufacturing. The aim of the research is to develop an adaptive centrifugal working tool and improve the quality of mineral fertilization. Materials and Methods. The adaptive centrifugal working tool was developed and manufactured based on studying the state of the matter and requirements to machines for mineral fertilization. At all stages of the research, there were used computer-aided design and rapid prototyping methods based on additive technologies. Results. As a result of the use of the presented working tools, the machine operating width has increased by 10.0‒22.5%. Experimental working tools, in comparison with serial ones, allow decreasing uneven distribution of mineral fertilizers by 13.4% due to their redistribution from the central zone to the edges. Discussion and Conclusion. As a result of experimental studies, the efficiency of the developed adaptive centrifugal working tools has been proved. It allows increasing uniformity of mineral fertilizer distribution and the machine operating width. Modern design methods make it possible to considerably reduce time and costs.

electroless nickel plating, acrylonitrile butadiene styrene, rapid prototyping, Mechanical engineering and machinery, and TJ1-1570

Electroless plating on Acrylonitrile Butadiene Styrene (ABS) is a metallization process that involves a reduction and oxidation reaction between the nickel source and the substrate material. The purpose of this research is to determine the ability of nickel deposition in the nickel electroless plating process with a specific etching time variation. This nickel electroless procedure begins with a chromic acid etching process that can last anywhere from 15 to 55 minutes and is useful for increasing roughness and creating submicroscopic cavities. After the etching process is finished, the surface roughness test is performed with a Mitutoyo SJ-210. Additionally, the activation step is carried out for 5 minutes in order for the polymer to become a conductor, allowing the plating process to proceed. The electroless plating process was then carried out for 55 and 75 minutes, with the goal of depositing nickel metal on the ABS surface. The coating results were analyzed using Fourier Transform Infrared (FTIR) spectroscopy IRSpirit/ATR-S serial No. A224158/Shimadzu to determine the functional groups formed both before and after the coating process, X-Ray Diffraction (XRD) to determine the character of the crystal structure, and phase analysis of a solid material using PANalytical type E'xpert Pro, To determine the surface morphology, the Zeiss EVO MA 10 was used to perform scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS) at 1000x magnification. The test findings demonstrate that, based on a range of investigations, etching variations of 15,25,35,45, and 55 minutes etching time 55 minutes are the best nickel deposited substrates, as evidenced by EDS data, where this treatment has the largest weight fraction of nickel. As a result, the longer the etching period, the rougher the surface becomes, affecting the capacity of nickel deposition to increase. Furthermore, it can be demonstrated in this investigation that the nickel deposited is in an amorphous form.

precision medicine, knowledgebase, polymorphic foreign key, mind map, prototyping tool, Immunologic diseases. Allergy, and RC581-607

BackgroundWith significant advancements in the area of precision medicine, the breadth and complexity of the relevant knowledge in the field has increased significantly. However, the difficulty associated with dynamic modelling and the disorganization of such knowledge hinders its rapid development potential.ResultsTo overcome the difficulty in using the relational database model for dynamic modelling, and to aid in the organization of precision medicine knowledge, we developed the Mind Mapping Knowledgebase Prototyping (MMKP) tool. The MMKP implements a novel design that we call a “polymorphic foreign key”, which allows the establishment of a logical linkage between a single table field and a record from any table. This design has advantages in supporting dynamic changes to the structural relationships in precision medicine knowledge. Knowledge stored in MMKP is presented as a mind map to facilitate human interaction. When using this tool, medical experts may curate the structure and content of the precision knowledge in a flow that is similar to the human thinking process.ConclusionsThe design of polymorphic foreign keys natively supports knowledge modelling in the form of mind mapping, which avoids the hard-coding of medical logic into a rigid database schema and significantly reduces the workload that is required for adapting a relational data model to future changes to the medical logic. The MMKP tool provides a graphical user interface for both data management and knowledgebase prototyping. It supports the flexible customization of the data field constraints and annotations. MMKP is available as open-source code on GitHub: https://github.com/ZjuLiangsl/mmkp.

Medicine and Science

Abstract Droplet microfluidics offers a platform from which new digital molecular assay, disease screening, wound healing and material synthesis technologies have been proposed. However, the current commercial droplet generation, assembly and imaging technologies are too expensive and rigid to permit rapid and broad-range tuning of droplet features/cargoes. This rapid prototyping bottleneck has limited further expansion of its application. Herein, an inexpensive home-made pipette droplet microfluidics kit is introduced. This kit includes elliptical pipette tips that can be fabricated with a simple DIY (Do-It-Yourself) tool, a unique tape-based or 3D printed shallow-center imaging chip that allows rapid monolayer droplet assembly/immobilization and imaging with a smart-phone camera or miniature microscope. The droplets are generated by manual or automatic pipetting without expensive and lab-bound microfluidic pumps. The droplet size and fluid viscosity/surface tension can be varied significantly because of our particular droplet generation, assembly and imaging designs. The versatility of this rapid prototyping kit is demonstrated with three representative applications that can benefit from a droplet microfluidic platform: (1) Droplets as microreactors for PCR reaction with reverse transcription to detect and quantify target RNAs. (2) Droplets as microcompartments for spirulina culturing and the optical color/turbidity changes in droplets with spirulina confirm successful photosynthetic culturing. (3) Droplets as templates/molds for controlled synthesis of gold-capped polyacrylamide/gold composite Janus microgels. The easily fabricated and user-friendly portable kit is hence ideally suited for design, training and educational labs.

Manufactures, TS1-2301, Technological innovations. Automation, and HD45-45.2

Abstract Industry 4.0 has ushered in a new era of digital manufacturing and in this context, digital twins are considered as the next wave of simulation technologies. The development and commissioning of Cyber Physical Systems (CPS) is taking advantage of these technologies to improve product quality while reducing costs and time to market. However, existing practices of virtual design prototyping and commissioning require the cooperation of domain specific engineering fields. This involves considerable effort as development is mostly carried out in different departments using vendor specific simulation tools. There is still no integrated simulation environment commercially available, in which all engineering disciplines can work collaboratively. This presents a major challenge when interlinking virtual models with their physical counterparts. This paper therefore addresses these challenges by implementing a holistic and vendor agnostic digital twin solution for design prototyping and commissioning practices. The solution was tested in an industrial use case, in which the digital twin effectively prototyped cost‐efficient solar assembly lines.

context-based interface prototyping, autonomous vehicles, human–machine interfaces, prototyping methods, simulation, physical context, Technology, and Science

Before autonomous vehicles (AVs; SAE levels 4 and 5) become broadly available, acceptance challenges such as trust and safety concerns must be overcome. In the development of appropriate HMIs that will tackle these challenges, physical and social context play essential roles. Contextual factors thus need to be considered in early prototyping stages. Based on a qualitative semi-systematic literature review and knowledge from our research, this paper elaborates on the value of context-based interface prototyping in the AV domain. It provides a comprehensive overview and a discussion of applicable methods, including physical lab-based prototyping (mock-up, ride simulation with virtual and mixed reality, and immersive video), social context simulation (actors, enactment, items and props, and sound), wizard-of-oz, and experimental vehicles. Finally, the paper discusses factors affecting the impact of prototyping and derives recommendations for the application of prototyping methods in future AV studies.

Autotransplantation, Rapid prototyping, Root canal treatment, Dentistry, and RK1-715

Abstract Background Autotransplantation is a beneficial treatment with a high success rate for young patients. However, most adult patients require root canal treatment (RCT) of the donor teeth after the autotransplantation procedure, which causes a prolonged treatment time and additional expenses and increases the rate of future tooth fracture. Rapid prototyping (RP)-assisted autotransplantation shortens the extra-alveolar time and enables a superior clinical outcome. However, no cohort studies of the application of this method on adult populations have been reported. Methods This study is a retrospective cohort study. All patients underwent autotransplantation from 2012 to 2020 in the Kaohsiung and Chia-Yi branches of Chang Gung Memorial Hospital, and the procedure and clinical outcomes were analysed. Differences in clinical outcomes, age, sex, extra-alveolar time, fixation method, and RCT rate were compared between the two groups. Results We enrolled 21 patients, 13 treated using the conventional method and 8 treated using the RP-based technique. The RCT rates of the conventional group and RP group were 92.3% and 59%, respectively. The mean age of the two groups was significantly different (28.8 ± 10 vs. 21.6 ± 2.1); after performing subgroup analysis by excluding all of the patients aged > 40 years, we found that the RCT rates were still significantly different (91.0% vs. 50%). The mean extra-alveolar time was 43 s in the RP group, and the autotransplantation survival rate in both groups was 100%. Conclusions Rapid prototyping-assisted autotransplantation was successfully adopted for all patients in our study population. By shortening the extra-alveolar time, only 50% of the patients required a root canal treatment with a 100% autotransplantation survival rate. Trial Registration : Retrospectively registered.

axial fan, ventilation, efficiency, rapid prototyping, CFD, FEM, and Technology

The article discusses the process of designing and testing as well as their results, carried out in order to increase the efficiency of axial fans, implemented as part of the European project INESI. Modifications of existing solutions based on rapid prototyping methods were presented. Scanning, FEM and CFD numerical calculations and 3D printing were used for that purpose. Rapid prototyping involved the use of a steel blade base and 3D-printed complex aerodynamic shapes that were bonded to create completely new blades. After their installation on the new rotor, enabling the angle of attack adjusting, a number of verifying tests of the fan were carried out. The solution was successfully tested and the results are discussed in the article.

Medicine and Science

Abstract Soft lithography has permitted rapid prototyping of precise microfluidic features by patterning a deformable elastomer such as polydimethylsiloxane (PDMS) with a photolithographically patterned mold. In microfluidics applications where the flexibility of PDMS is a drawback, a variety of more rigid materials have been proposed. Compared to alternatives, devices fabricated from epoxy and glass have superior mechanical performance, feature resolution, and solvent compatibility. Here we provide a detailed step-by-step method for fabricating rigid microfluidic devices from soft lithography patterned epoxy and glass. The bonding protocol was optimized yielding devices that withstand pressures exceeding 500 psi. Using this method, we demonstrate the use of rigid high aspect ratio spiral microchannels for high throughput cell focusing.