1  20
Next
Number of results to display per page
1. Mechanics of materials [2018]
 Goodno, Barry J., author.
 Ninth edition.  Boston, MA : Cengage Learning, [2018]
 Description
 Book — xxiv, 1159 pages : color illustrations ; 27 cm
 Summary

Give students a rigorous, complete, and integrated treatment of the mechanics of materials  an essential subject in mechanical, civil, and structural engineering. This leading text, Goodno/Gere's MECHANICS OF MATERIALS, 9E, examines the analysis and design of structural members subjected to tension, compression, torsion, and bending  laying the foundation for further study.
(source: Nielsen Book Data) 9781337093347 20170227
 Online
Engineering Library (Terman)
Engineering Library (Terman)  Status 

On reserve: Ask at circulation desk  
TA405 .G44 2018  Unknown 2hour loan 
ME8001
 Course
 ME8001  Mechanics of Materials
 Instructor(s)
 Chaudhuri, Ovijit
2. Mechanics of materials [2017]
 Hibbeler, R. C., author.
 Tenth edition.  Boston : Pearson, [2017]
 Description
 Book — xvii, 877 pages : illustrations (chiefly color) ; 25 cm
 Summary

 1. Stress Chapter Objectives 1.1 Introduction 1.2 Equilibrium of a Deformable Body 1.3 Stress 1.4 Average Normal Stress in an Axially Loaded Bar 1.5 Average Shear Stress 1.6 Allowable Stress Design 1.7 Limit State Design
 2. Strain Chapter Objectives 2.1 Deformation 2.2 Strain
 3. Mechanical Properties of Materials Chapter Objectives 3.1 The Tension and Compression Test 3.2 The StressStrain Diagram 3.3 StressStrain Behavior of Ductile and Brittle Materials 3.4 Strain Energy 3.5 Poisson's Ratio 3.6 The Shear StressStrain Diagram *3.7 Failure of Materials Due to Creep and Fatigue
 4. Axial Load Chapter Objectives 4.1 SaintVenant's Principle 4.2 Elastic Deformation of an Axially Loaded Member 4.3 Principle of Superposition 4.4 Statically Indeterminate Axially Loaded Members 4.5 The Force Method of Analysis for Axially Loaded Members 4.6 Thermal Stress 4.7 Stress Concentrations *4.8 Inelastic Axial Deformation *4.9 Residual Stress
 5. Torsion Chapter Objectives 5.1 Torsional Deformation of a Circular Shaft 5.2 The Torsion Formula 5.3 Power Transmission 5.4 Angle of Twist 5.5 Statically Indeterminate TorqueLoaded Members *5.6 Solid Noncircular Shafts *5.7 ThinWalled Tubes Having Closed Cross Sections 5.8 Stress Concentration *5.9 Inelastic Torsion *5.10 Residual Stress
 6. Bending Chapter Objectives 6.1 Shear and Moment Diagrams 6.2 Graphical Method for Constructing Shear and Moment Diagrams 6.3 Bending Deformation of a Straight Member 6.4 The Flexure Formula 6.5 Unsymmetric Bending *6.6 Composite Beams *6.7 Reinforced Concrete Beams *6.8 Curved Beams 6.9 Stress Concentrations *6.10 Inelastic Bending
 7. Transverse Shear Chapter Objectives 7.1 Shear in Straight Members 7.2 The Shear Formula 7.3 Shear Flow in BuiltUp Members 7.4 Shear Flow in ThinWalled Members *7.5 Shear Center for Open ThinWalled Members
 8. Combined Loadings Chapter Objectives 8.1 ThinWalled Pressure Vessels 8.2 State of Stress Caused by Combined Loadings
 9. Stress Transformation Chapter Objectives 9.1 PlaneStress Transformation 9.2 General Equations of PlaneStress Transformation 9.3 Principal Stresses and Maximum InPlane Shear Stress 9.4 Mohr's CirclePlane Stress 9.5 Absolute Maximum Shear Stress
 10. Strain Transformation Chapter Objectives 10.1 Plane Strain 10.2 General Equations of PlaneStrain Transformation *10.3 Mohr's CirclePlane Strain *10.4 Absolute Maximum Shear Strain 10.5 Strain Rosettes 10.6 Material Property Relationships *10.7 Theories of Failure
 11. Design of Beams and Shafts Chapter Objectives 11.1 Basis for Beam Design 11.2 Prismatic Beam Design *11.3 Fully Stressed Beams *11.4 Shaft Design
 12. Deflection of Beams and Shafts Chapter Objectives 12.1 The Elastic Curve 12.2 Slope and Displacement by Integration *12.3 Discontinuity Functions *12.4 Slope and Displacement by the MomentArea Method 12.5 Method of Superposition 12.6 Statically Indeterminate Beams and Shafts 12.7 Statically Indeterminate Beams and ShaftsMethod of Integration *12.8 Statically Indeterminate Beams and ShaftsMomentArea Method 12.9 Statically Indeterminate Beams and ShaftsMethod of Superposition
 13. Buckling of Columns Chapter Objectives 13.1 Critical Load 13.2 Ideal Column with Pin Supports 13.3 Columns Having Various Types of Supports *13.4 The Secant Formula *13.5 Inelastic Buckling *13.6 Design of Columns for Concentric Loading *13.7 Design of Columns for Eccentric Loading
 14. Energy Methods Chapter Objectives 14.1 External Work and Strain Energy 14.2 Elastic Strain Energy for Various Types of Loading 14.3 Conservation of Energy 14.4 Impact Loading *14.5 Principle of Virtual Work *14.6 Method of Virtual Forces Applied to Trusses *14.7 Method of Virtual Forces Applied to Beams *14.8 Castigliano's Theorem *14.9 Castigliano's Theorem Applied to Trusses *14.10 Castigliano's Theorem Applied to Beams
 Appendix A Geometric Properties of an Area B Geometric Properties of Structural Shapes C Slopes and Deflections of Beams
 Solutions and Answers for Preliminary Problems Fundamental Problems Partial Solutions and Answers Selected Answers Index
 Sections of the book that contain more advanced material are indicated by a star (*).
 (source: Nielsen Book Data)
(source: Nielsen Book Data) 9780134319650 20171002
 Online
Engineering Library (Terman)
Engineering Library (Terman)  Status 

On reserve: Ask at circulation desk  
TA405 .H47 2017  Unknown 2hour loan 
ME8001
 Course
 ME8001  Mechanics of Materials
 Instructor(s)
 Chaudhuri, Ovijit
3. Mechanics of materials [2014]
 Hibbeler, R. C.
 Ninth edition.  Boston : Prentice Hall, [2014]
 Description
 Book — xvii, 879 pages : illustrations (chiefly color) ; 25 cm
 Summary

 1 Stress
 3 Chapter Objectives
 3 1.1 Introduction
 3 1.2 Equilibrium of a Deformable Body
 4 1.3 Stress
 22 1.4 Average Normal Stress in an Axially Loaded Bar
 24 1.5 Average Shear Stress
 32 1.6 Allowable Stress Design
 46 1.7 Limit State Design
 48
 2 Strain
 67 Chapter Objectives
 67 2.1 Deformation
 67 2.2 Strain
 68
 3 Mechanical Properties of Materials
 83 Chapter Objectives
 83 3.1 The Tension and Compression Test
 83 3.2 The StressStrain Diagram
 85 3.3 StressStrain Behavior of Ductile and Brittle Materials
 89 3.4 Hooke's Law
 92 3.5 Strain Energy
 94 3.6 Poisson's Ratio
 104 3.7 The Shear StressStrain Diagram
 106 *3.8 Failure of Materials Due to Creep and Fatigue
 109
 4 Axial Load
 121 Chapter Objectives
 121 4.1 SaintVenant's Principle
 121 4.2 Elastic Deformation of an Axially Loaded Member
 124 4.3 Principle of Superposition
 138 4.4 Statically Indeterminate Axially Loaded Member
 139 4.5 The Force Method of Analysis for Axially Loaded Members
 145 4.6 Thermal Stress
 153 4.7 Stress Concentrations
 160 *4.8 Inelastic Axial Deformation
 164 *4.9 Residual Stress
 166
 5 Torsion
 181 Chapter Objectives
 181 5.1 Torsional Deformation of a Circular Shaft
 181 5.2 The Torsion Formula
 184 5.3 Power Transmission
 192 5.4 Angle of Twist
 204 5.5 Statically Indeterminate TorqueLoaded Members
 218 *5.6 Solid Noncircular Shafts
 225 *5.7 ThinWalled Tubes Having Closed Cross Sections
 228 5.8 Stress Concentration
 238 *5.9 Inelastic Torsion
 241 *5.10 Residual Stress
 243
 6 Bending
 259 Chapter Objectives
 259 6.1 Shear and Moment Diagrams
 259 6.2 Graphical Method for Constructing Shear and Moment Diagrams
 266 6.3 Bending Deformation of a Straight Member
 285 6.4 The Flexure Formula
 289 6.5 Unsymmetric Bending
 306 *6.6 Composite Beams
 316 *6.7 Reinforced Concrete Beams
 319 *6.8 Curved Beams
 323 6.9 Stress Concentrations
 330 *6.10 Inelastic Bending
 339
 7 Transverse Shear
 363 Chapter Objectives
 363 7.1 Shear in Straight Members
 363 7.2 The Shear Formula
 365 7.3 Shear Flow in BuiltUp Members
 382 7.4 Shear Flow in ThinWalled Members
 391 *7.5 Shear Center for Open ThinWalled Members
 396
 8 Combined Loadings
 409 Chapter Objectives
 409 8.1 ThinWalled Pressure Vessels
 409 8.2 State of Stress Caused by Combined Loadings
 416
 9 Stress Transformation
 441 Chapter Objectives
 441 9.1 PlaneStress Transformation
 441 9.2 General Equations of PlaneStress Transformation
 446 9.3 Principal Stresses and Maximum InPlane Shear Stress
 449 9.4 Mohr's CirclePlane Stress
 465 9.5 Absolute Maximum Shear Stress
 477
 10 Strain Transformation
 489 Chapter Objectives
 489 10.1 Plane Strain
 489 10.2 General Equations of PlaneStrain Transformation
 490 *10.3 Mohr's CirclePlane Strain
 498 *10.4 Absolute Maximum Shear Strain
 506 10.5 Strain Rosettes
 508 10.6 MaterialProperty Relationships
 512 *10.7 Theories of Failure
 524
 11 Design of Beams and Shafts
 541 Chapter Objectives
 541 11.1 Basis for Beam Design
 541 11.2 Prismatic Beam Design
 544 *11.3 Fully Stressed Beams
 558 *11.4 Shaft Design
 562
 12 Deflection of Beams and Shafts
 573 Chapter Objectives
 573 12.1 The Elastic Curve
 573 12.2 Slope and Displacement by Integration
 577 *12.3 Discontinuity Functions
 597 *12.4 Slope and Displacement by the MomentArea Method
 608 12.5 Method of Superposition
 623 12.6 Statically Indeterminate Beams and Shafts
 631 12.7 Statically Indeterminate Beams and ShaftsMethod of Integration
 632 *12.8 Statically Indeterminate Beams and ShaftsMomentArea Method
 637 12.9 Statically Indeterminate Beams and ShaftsMethod of Superposition
 643
 13 Buckling of Columns
 661 Chapter Objectives
 661 13.1 Critical Load
 661 13.2 Ideal Column with Pin Supports
 664 13.3 Columns Having Various Types of Supports
 670 *13.4 The Secant Formula
 682 *13.5 Inelastic Buckling
 688 *13.6 Design of Columns for Concentric Loading
 696 *13.7 Design of Columns for Eccentric Loading
 707
 14 Energy Methods
 719 Chapter Objectives
 719 14.1 External Work and Strain Energy
 719 14.2 Elastic Strain Energy for Various Types of Loading
 724 14.3 Conservation of Energy
 737 14.4 Impact Loading
 744 *14.5 Principle of Virtual Work
 755 *14.6 Method of Virtual Forces Applied to Trusses
 759 *14.7 Method of Virtual Forces Applied to Beams
 766 *14.8 Castigliano's Theorem
 775 *14.9 Castigliano's Theorem Applied to Trusses
 777 *14.10 Castigliano's Theorem Applied to Beams
 780 Appendix A. Geometric Properties of an Area B. Geometric Properties of Structural Shapes C. Slopes and Deflections of Beams Fundamental Problems Partial Solutions and Answers Answers for Selected Problems Index (*) Sections of the book that contain more advanced material are indicated by a star. Time permitting, some of these topics may be included in the course. Furthermore, this material provides a suitable reference for basic principles when it is covered in other courses, and it can be used as a basis for assigning special projects.
 (source: Nielsen Book Data)
(source: Nielsen Book Data) 9780133254426 20160615
 Online
Engineering Library (Terman)
Engineering Library (Terman)  Status 

On reserve: Ask at circulation desk  
TA405 .H47 2014  Unknown 2hour loan 
ME8001
 Course
 ME8001  Mechanics of Materials
 Instructor(s)
 Chaudhuri, Ovijit
4. Engineering mechanics : dynamics [2013]
 Gray, Gary L.
 2nd ed.  New York : McGrawHill, c2013.
 Description
 Book — 1 v. (various pagings) : col. ill. ; 28 cm.
 Summary

 Chapter 1  Setting the Stage for the Study of Dynamics
 Chapter 2  Particle Kinematics
 Chapter 3  Force and Acceleration Methods for Particles
 Chapter 4  Energy Methods for Particles
 Chapter 5  Momentum Methods for Particles
 Chapter 6  Planar Rigid Body Kinematics
 Chapter 7  NewtonEuler Equations for Planar Rigid Body Motion
 Chapter 8  Energy and Momentum Methods for Rigid Bodies
 Chapter 9  Mechanical Vibrations
 Chapter 10  ThreeDimensional Dynamics of Rigid Bodies Appendix A  Mass Moments of Inertia Appendix B  Angular Momentum of a Rigid Body Appendix C  Answers to Selected Problems.
 (source: Nielsen Book Data)
(source: Nielsen Book Data) 9780073380308 20160607
 Online
Engineering Library (Terman)
Engineering Library (Terman)  Status 

Stacks  
TA352 .G724 2013  Unknown 
5. Engineering mechanics : statics [2013]
 Plesha, Michael E.
 2nd ed.  New York, NY : McGrawHill, c2013.
 Description
 Book — 1 v. (various pagings) : ill. (chiefly col.) ; 28 cm.
 Summary

 Chapter 1  Introduction
 Chapter 2  Vectors: Force and Position
 Chapter 3  Equilibrium of Particles
 Chapter 4  Moment of Force and Equivalent Force Systems
 Chapter 5  Equilibrium of Bodies
 Chapter 6  Structural Analysis and Machines
 Chapter 7  Centroids and Distributed Force Systems
 Chapter 8  Internal Forces
 Chapter 9  Friction
 Chapter 10  Moments of Inertia Appendix A  Technical Writing Appendix B  Answers to Selected Problems.
 (source: Nielsen Book Data)
(source: Nielsen Book Data) 9780073380292 20160605
 Online
Engineering Library (Terman)
Engineering Library (Terman)  Status 

Stacks  
TA351 .P56 2013  Unknown 
6. Mechanics of materials [2013]
 Gere, James M.
 8th ed.  Stamford, CT : Cengage Learning, c2013.
 Description
 Book — xx, 1,130 p. : ill. (some col.) ; 26 cm.
 Summary

The Eighth Edition of MECHANICS OF MATERIALS continues its tradition as one of the leading texts on the market. With its hallmark clarity and accuracy, this text develops student understanding along with analytical and problemsolving skills. The main topics include analysis and design of structural members subjected to tension, compression, torsion, bending, and more. The book includes more material than can be taught in a single course giving instructors the opportunity to select the topics they wish to cover while leaving any remaining material as a valuable student reference.
(source: Nielsen Book Data) 9781111577735 20160610
 Online
Engineering Library (Terman)
Engineering Library (Terman)  Status 

On reserve: Ask at circulation desk  
TA405 .G44 2013  Unknown 2hour loan 
ME8001
 Course
 ME8001  Mechanics of Materials
 Instructor(s)
 Chaudhuri, Ovijit
 10th ed.  New York : McGrawHill, c2013.
 Description
 Book — 1 v. (various pagings) : col. ill. ; 26 cm.
 Summary

 1 Introduction
 2 Statics of Particles
 3 Rigid Bodies: Equivalent Systems of Forces
 4 Equilibrium of Rigid Bodies
 5 Distributed Forces: Centroids and Centers of Gravity
 6 Analysis of Structures
 7 Forces in Beams and Cables
 8 Friction
 9 Distributed Forces: Moments of Inertia
 10 Method of Virtual Work
 11 Kinematics of Particles
 12 Kinetics of Particles: Newton's Second Law
 13 Kinetics of Particles: Energy and Momentum Methods
 14 Systems of Particles
 15 Kinematics of Rigid Bodies
 16 Plane Motion of Rigid Bodies: Forces and Accelerations
 17 Plane Motion of Rigid Bodies: Energy and Momentum Methods
 18 Kinetics of Rigid Bodies in Three Dimensions
 19 Mechanical Vibrations Appendix Fundamentals of Engineering Examination.
 (source: Nielsen Book Data)
(source: Nielsen Book Data) 9780073398136 20160608
 Online
Engineering Library (Terman)
Engineering Library (Terman)  Status 

Stacks  
TA350 .V34 2013  Unknown 
8. Statics and mechanics of materials [2011]
 New York : McGrawHill, c2011.
 Description
 Book — xv, 714 p. : col. ill. ; 27 cm.
 Summary

 Chapter 1: Introduction
 Chapter 2: Statics of Particles
 Chapter 3: Rigid Bodies: Equivalent Systems of Forces
 Chapter 4: Equilibrium of Rigid Bodies
 Chapter 5: Distributed Forces: Centroids and Centers of Gravity
 Chapter 6: Analysis of Structures
 Chapter 7: Distributed Forces: Moments of Inertia
 Chapter 8: Concepts of Stress
 Chapter 9: Stress and Strain: Axial Loading
 Chapter 10: Torsion
 Chapter 11: Pure Bending
 Chapter 12: Analysis and Design of Beams for Bending
 Chapter 13: Shearing Stresses in Beams and ThinWalled Members
 Chapter 14: Transformations of Stress
 Chapter 15: Deflection of Beams
 Chapter 16: Columns Appendices A: Typical Properties of Selected Materials Used in Engineering B: Properties of RolledSteel Shapes C: Beam Deflections and Slopes Photo Credits Index Answers to Problems.
 (source: Nielsen Book Data)
(source: Nielsen Book Data) 9780073380155 20160604
 Online
Engineering Library (Terman)
Engineering Library (Terman)  Status 

Stacks  
TA351 .S68 2011  Unavailable Checked out  Overdue Request 
TA351 .S68 2011  Unknown 
9. Engineering mechanics : dynamics [2010]
 Gray, Gary L.
 New York, NY : McGrawHill, c2010.
 Description
 Book — xxix, 768 p. : col. ill. ; 26 cm.
 Summary

 Chapter 1 Setting the Stage for the Study of Dynamics
 Chapter 2 Particle Kinematics
 Chapter 3 Force and Acceleration Methods for Particles
 Chapter 4 Energy Methods for Particles
 Chapter 5 Momentum Methods for Particles
 Chapter 6 Planar Rigid Body Kinematics
 Chapter 7 NewtonEuler Equations for Planar Rigid Body Motion
 Chapter 8 Energy and Momentum Methods for Rigid Bodies
 Chapter 9 Mechanical Vibrations
 Chapter 10 ThreeDimensional Dynamics of Rigid Bodies (
 Chapter 10 available online) Appendix A Mass Moments of Inertia Appendix B Angular Momentum of a Rigid Body.
 (source: Nielsen Book Data)
(source: Nielsen Book Data) 9780071311106 20160605
 Online
Engineering Library (Terman)
Engineering Library (Terman)  Status 

Stacks  
TA352 .G724 2010  Unknown 
10. Engineering mechanics : statics & dynamics [2010]
 Costanzo, Francesco, 1964
 New York : McGrawHill Higher Education, c2010.
 Description
 Book — xxx, 607, 768 p. : ill. (chiefly col.) ; 27 cm.
 Summary

 STATICS
 Chapter 1 Introduction
 Chapter 2 Vectors: Force and Position
 Chapter 3 Equilibrium of Particles
 Chapter 4 Moment of a Force and Equivalent Force Systems
 Chapter 5 Equilibrium of Bodies
 Chapter 6 Structural Analysis and Machines
 Chapter 7 Centroids and Distributed Force Systems
 Chapter 8 Internal Forces
 Chapter 9 Friction
 Chapter 10 Moments of Inertia Appendix A Technical Writing Appendix B Answers to Selected Problems DYNAMICS
 Chapter 1 Setting the Stage for the Study of Dynamics
 Chapter 2 Particle Kinematics
 Chapter 3 Force and Acceleration Methods for Particles
 Chapter 4 Energy Methods for Particles
 Chapter 5 Momentum Methods for Particles
 Chapter 6 Planar Rigid Body Kinematics
 Chapter 7 NewtonEuler Equations for Planar Rigid Body Motion
 Chapter 8 Energy and Momentum Methods for Rigid Bodies
 Chapter 9 Mechanical Vibrations
 Chapter 10 ThreeDimensional Dynamics of Rigid Bodies (chapter available online) Appendix A Mass Moments of Inertia Appendix B Angular Momentum of Rigid Body Appendix C Answers to Selected Problems.
 (source: Nielsen Book Data)
(source: Nielsen Book Data) 9780077302009 20160604
 Online
Engineering Library (Terman)
Engineering Library (Terman)  Status 

Stacks  
TA350 .C79 2010  Unknown 
TA350 .C79 2010  Unknown 
11. Engineering mechanics. Statics and dynamics [2010]
 Hibbeler, R. C.
 12th ed.  Upper Saddle River, NJ : PrenticeHall, c2010.
 Description
 Book — xv, 732 p. : col. ill. ; 25 cm.
 Summary

 STATICS
 1 General Principles
 3 Chapter Objectives
 3 1.1 Mechanics
 3 1.2 Fundamental Concepts
 4 1.3 Units of Measurement
 7 1.4 The International System of Units
 9 1.5 Numerical Calculations
 10 1.6 General Procedure for Analysis
 12
 2 Force Vectors
 17 Chapter Objectives
 17 2.1 Scalars and Vectors
 17 2.2 Vector Operations
 18 2.3 Vector Addition of Forces
 20 2.4 Addition of a System of Coplanar Forces
 32 2.5 Cartesian Vectors
 43 2.6 Addition of Cartesian Vectors
 46 2.7 Position Vectors
 56 2.8 Force Vector Directed Along a Line
 59 2.9 Dot Product
 69
 3 Equilibrium of a Particle
 85 Chapter Objectives
 85 3.1 Condition for the Equilibrium of a Particle
 85 3.2 The FreeBody Diagram
 86 3.3 Coplanar Force Systems
 89 3.4 ThreeDimensional Force Systems
 103
 4 Force System Resultants
 117 Chapter Objectives
 117 4.1 Moment of a ForceScalar Formulation
 117 4.2 Cross Product
 121 4.3 Moment of a ForceVector Formulation
 124 4.4 Principle of Moments
 128 4.5 Moment of a Force about a Specified Axis
 139 4.6 Moment of a Couple
 148 4.7 Simplification of a Force and Couple System
 160 4.8 Further Simplification of a Force and Couple System
 170 4.9 Reduction of a Simple Distributed Loading
 183
 5 Equilibrium of a Rigid Body
 199 Chapter Objectives
 199 5.1 Conditions for RigidBody Equilibrium
 199 5.2 FreeBody Diagrams
 201 5.3 Equations of Equilibrium
 214 5.4 Two and ThreeForce Members
 224 5.5 FreeBody Diagrams
 237 5.6 Equations of Equilibrium
 242 5.7 Constraints and Statical Determinacy
 243
 6 Structural Analysis
 263 Chapter Objectives
 263 6.1 Simple Trusses
 263 6.2 The Method of Joints
 266 6.3 ZeroForce Members
 272 6.4 The Method of Sections
 280 6.5 Space Trusses
 290 6.6 Frames and Machines
 294 7Internal Forces
 329 Chapter Objectives
 329 7.1 Internal Forces Developed in Structural Members
 329 7.2 Shear and Moment Equations and Diagrams
 345 7.3 Relations between Distributed Load, Shear, and Moment
 354 7.4 Cables
 365
 8 Friction
 387 Chapter Objectives
 387 8.1 Characteristics of Dry Friction
 387 8.2 Problems Involving Dry Friction
 392 8.3 Wedges
 412 8.4 Frictional Forces on Screws
 414 8.5 Frictional Forces on Flat Belts
 421 8.6 Frictional Forces on Collar Bearings, Pivot Bearings, and Disks
 429 8.7 Frictional Forces on Journal Bearings
 432 8.8 Rolling Resistance
 434
 9 Center of Gravity andCentroid
 447 Chapter Objectives
 447 9.1 Center of Gravity, Center of Mass, and the Centroid of a Body
 447 9.2 Composite Bodies
 470 9.3 Theorems of Pappus and Guldinus
 484 9.4 Resultant of a General Distributed Loading
 493 9.5 Fluid Pressure
 494
 10 Moments of Inertia
 511 Chapter Objectives
 511 10.1 Definition of Moments of Inertia for Areas
 511 10.2 ParallelAxis Theorem for an Area
 512 10.3 Radius of Gyration of an Area
 513 10.4 Moments of Inertia for Composite Areas
 522 10.5 Product of Inertia for an Area
 530 10.6 Moments of Inertia for an Area about Inclined Axes
 534 10.7 Mohr's Circle for Moments of Inertia
 537 10.8 Mass Moment of Inertia
 545
 11 Virtual Work
 563 Chapter Objectives
 563 11.1 Definition of Work
 563 11.2 Principle of Virtual Work
 565 11.3 Principle of Virtual Work for a System of Connected Rigid Bodies
 567 11.4 Conservative Forces
 579 11.5 Potential Energy
 580 11.6 PotentialEnergy Criterion for Equilibrium
 582 11.7 Stability of Equilibrium Configuration
 583 Appendix A. Mathematical Review and Expressions
 598 Fundamental Problems Partial Solutions and Answers
 603 Answers to Selected Problems
 620 Index
 650 DYNAMICS
 12 Kinematics of a Particle
 3 Chapter Objectives
 3 12.1 Introduction
 3 12.2 Rectilinear Kinematics: Continuous Motion
 5 12.3 Rectilinear Kinematics: Erratic Motion
 19 12.4 General Curvilinear Motion
 32 12.5 Curvilinear Motion: Rectangular Components
 34 12.6 Motion of a Projectile
 39 12.7 Curvilinear Motion: Normal and Tangential Components
 53 12.8 Curvilinear Motion: Cylindrical Components
 67 12.9 Absolute Dependent Motion Analysis of Two Particles
 81 12.10 RelativeMotion of Two Particles Using Translating Axes
 87
 13 Kinetics of a Particle: Force and Acceleration
 107 Chapter Objectives
 107 13.1 Newton's Second Law of Motion
 107 13.2 The Equation of Motion
 110 13.3 Equation of Motion for a System of Particles
 112 13.4 Equations of Motion: Rectangular Coordinates
 114 13.5 Equations of Motion: Normal and Tangential Coordinates
 131 13.6 Equations of Motion: Cylindrical Coordinates
 144 *13.7 CentralForce Motion and Space Mechanics
 155
 14 Kinetics of a Particle: Work and Energy
 169 Chapter Objectives
 169 14.1 The Work of a Force
 169 14.2 Principle of Work and Energy
 174 14.3 Principle of Work and Energy for a System of Particles
 176 14.4 Power and Efficiency
 192 14.5 Conservative Forces and Potential Energy
 201 14.6 Conservation of Energy
 205
 15 Kinetics of a Particle: Impulse and Momentum
 221 Chapter Objectives
 221 15.1 Principle of Linear Impulse and Momentum
 221 15.2 Principle of Linear Impulse and Momentum for a System of Particles
 228 15.3 Conservation of Linear Momentum for a System of Particles
 236 15.4 Impact
 248 15.5 Angular Momentum
 262 15.6 Relation Between Moment of a Force and Angular Momentum
 263 15.7 Principle of Angular Impulse and Momentum
 266 15.8 Steady Flow of a Fluid Stream
 277 *15.9 Propulsion with Variable Mass
 282 Review
 1. Kinematics and Kinetics of a Particle
 298
 16 Planar Kinematics of a Rigid Body
 311 Chapter Objectives
 311 16.1 Planar RigidBody Motion
 311 16.2 Translation
 313 16.3 Rotation about a Fixed Axis
 314 16.4 Absolute Motion Analysis
 329 16.5 RelativeMotion Analysis: Velocity
 337 16.6 Instantaneous Center of Zero Velocity
 351 16.7 RelativeMotion Analysis: Acceleration
 363 16.8 RelativeMotion Analysis using Rotating Axes
 377
 17 Planar Kinetics of a Rigid Body: Force and Acceleration
 395 Chapter Objectives
 395 17.1 Moment of Inertia
 395 17.2 Planar Kinetic Equations of Motion
 409 17.3 Equations of Motion: Translation
 412 17.4 Equations of Motion: Rotation about a Fixed Axis
 425 17.5 Equations of Motion: General Plane Motion
 440
 18 Planar Kinetics of aRigid Body: Work and Energy
 455 Chapter Objectives
 455 18.1 Kinetic Energy
 455 18.2 The Work of a Force
 458 18.3 The Work of a Couple
 460 18.4 Principle of Work and Energy
 462 18.5 Conservation of Energy
 477
 19 Planar Kinetics of a RigidBody: Impulse and Momentum
 495 Chapter Objectives
 495 19.1 Linear and Angular Momentum
 495 19.2 Principle of Impulse and Momentum
 501 19.3 Conservation of Momentum
 517 *19.4 Eccentric Impact
 521 Review
 2. Planar Kinematics and Kinetics of a Rigid Body
 534
 20 ThreeDimensional Kinematics of a Rigid Body
 549 Chapter Objectives
 549 20.1 Rotation About a Fixed Point
 549 *20.2 The Time Derivative of a Vector Measured from Either a Fixed or TranslatingRotating System
 552 20.3 General Motion
 557 *20.4 RelativeMotion Analysis Using Translating and Rotating Axes
 566
 21 ThreeDimensional Kinetics of a Rigid Body
 579 Chapter Objectives
 579 *21.1 Moments and Products of Inertia
 579 21.2 Angular Momentum
 589 21.3 Kinetic Energy
 592 *21.4 Equations of Motion
 600 *21.5 Gyroscopic Motion
 614 21.6 TorqueFree Motion
 620 CONTENTS X I I I
 22 Vibrations
 631 Chapter Objectives
 631 *22.1 Undamped Free Vibration
 631 *22.2 Energy Methods
 645 *22.3 Undamped Forced Vibration
 651 *22.4 Viscous Damped Free Vibration
 655 *22.5 Viscous Damped Forced Vibration
 658 *22.6 Electrical Circuit Analogs
 661 Appendix A. Mathematical Expressions
 670 B. Vector Analysis
 672 C. The Chain Rule
 677 Fundamental Problems Partial Solutions and Answers
 679 Answers to Selected Problems
 000 Index 000.
 (source: Nielsen Book Data)
(source: Nielsen Book Data) 9780138149291 20160604
 Online
Engineering Library (Terman)
Engineering Library (Terman)  Status 

Stacks  
TA350 .H48 2010  Unknown 
12. Statics [1972]
 6th ed.  New York : McGrawHill, c2010.
 Description
 Book — ix, 287 p. : ill. ; 28 cm.
Engineering Library (Terman)
Engineering Library (Terman)  Status 

Stacks  
TA350 .M32 2010  Unknown 
13. Mechanics of materials [2009]
 Gere, James M.
 7th ed.  Toronto, ON : Cengage Learning, c2009.
 Description
 Book — xviii, 1022 p. : ill. (some col.) ; 25 cm.
 Online
Engineering Library (Terman)
Engineering Library (Terman)  Status 

Stacks  
TA405 .G44 2009  Unknown 
TA405 .G44 2009  Unknown 
 9th ed.  Dubuque, Iowa : McGrawHill Companies, 2009.
 Description
 Book — p. cm.
 Summary

Continuing in the spirit of its successful previous editions, the ninth edition of Beer, Johnston, Mazurek, and "Cornwell's Vector Mechanics for Engineers" provides conceptually accurate and thorough coverage together with a significant refreshment of the exercise sets and online delivery of homework problems to your students. Nearly forty percent of the problems in the text are changed from the previous edition. The Beer/Johnston textbooks introduced significant pedagogical innovations into engineering mechanics teaching. The consistent, accurate problemsolving methodology gives your students the best opportunity to learn statics and dynamics. At the same time, the careful presentation of content, unmatched levels of accuracy, and attention to detail have made these texts the standard for excellence.
(source: Nielsen Book Data) 9780077275556 20160528
 Online
Engineering Library (Terman), SAL3 (offcampus storage)
Engineering Library (Terman)  Status 

Stacks  
TA350 .B3552 2009  Unknown 
SAL3 (offcampus storage)  Status 

Stacks  Request 
TA350 .B3552 2009  Available 
15. Intermediate mechanics of materials [2008]
 Vable, Madhukar.
 New York : Oxford University Press, 2008.
 Description
 Book — xix, 604 p. : ill. ; 25 cm.
 Summary

 1. Stress and Strain
 2. Material Description
 3. Basic Structural Members
 4. Composite Structural Members
 5. Inelastic Structural Behaviour
 6. Thin Walled Structural Members
 7. Energy Methods
 8. Elasticity and Mechanics of Materials
 9. Finite Element Method STATISTICS AND MECHANICS OF MATERIALS REVIEW BASIC MATRIX ALGEBRA INFORMATION CHARTS AND TABLES BIBLIOGRAPHY.
 (source: Nielsen Book Data)
(source: Nielsen Book Data) 9780195188554 20160528
 Online
Engineering Library (Terman)
Engineering Library (Terman)  Status 

Stacks  
TA405 .V276 2008  Unknown 
16. Engineering mechanics [2007]
 Meriam, J. L. (James L.)
 6th ed.  Hoboken, NJ : Wiley, c2007.
 Description
 Book — 2 v. : col. ill. ; 27 cm.
 Summary

 PART I DYNAMICS OF PARTICLES Introduction to Dynamics Kinematics of Particles Kinetics of Particles Kinetics of Systems of Particles PART II DYNAMICS OF RIGID BODIES Plane Kinematics of Rigid Bodies Plane Kinetics of Rigid Bodies Introduction to ThreeDimensional Dynamics of Rigid Bodies Vibration and Time Response Appendix A: Area Moments of Inertia Appendix B: Mass Moments of Inertia Appendix C: Selected Topics of Mathematics Appendix D: Useful Tables Index.
 (source: Nielsen Book Data)
 PART I. DYNAMICS OF PARTICLES.
 CHAPTER 1. INTRODUCTION TO DYNAMICS.1/1 History and Modern Applications.History of Dynamics.Applications of Dynamics.1/2 Basic Concepts.1/3 Newton's Laws.1/4 Units.1/5 Gravitation.Effect of Altitude.Effect of a Rotating Earth.Standard Value of g.Apparent Weight.1/6 Dimensions.1/7 Solving Problems in Dynamics.Approximation in Mathematical Models.Method of Attack.Application of Basic Principles.Numerical versus Symbolic Solutions.Solution Methods.1/8 Chapter Review.
 CHAPTER 2. KINEMATICS OF PARTICLES.2/1 Introduction.Particle Motion.Choice of Coordinates.2/2 Rectilinear Motion.Velocity and Acceleration.Graphical Interpretations.Analytical Integration.2/3 Plane Curvilinear Motion.Velocity.Acceleration.Visualization of Motion.2/4 Rectangular Coordinates (xy).Vector Representation.Projectile Motion.2/5 Normal and Tangential Coordinates (nt).Velocity and Acceleration.Geometric Interpretation.Circular Motion.2/6 Polar Coordinates (r).Time Derivatives of the Unit Vectors.Velocity.Acceleration.Geometric Interpretation.Circular Motion.2/7 Space Curvilinear Motion.Rectangular Coordinates (xyz).Cylindrical Coordinates (rz).Spherical Coordinates (R).2/8 Relative Motion (Translating Axes).Choice of Coordinate System.Vector Representation.Additional Considerations.2/9 Constrained Motion of Connected Particles.One Degree of Freedom.Two Degrees of Freedom.2/10 Chapter Review.
 CHAPTER 3. KINETICS OF PARTICLES.3/1 Introduction.SECTION A. FORCE, MASS, AND ACCELERATION.3/2 Newton's Second Law.Inertial System.Systems of Units.Force and Mass Units.3/3 Equation of Motion and Solution of Problems.Two Types of Dynamics Problems.Constrained and Unconstrained Motion.FreeBody Diagram.3/4 Rectilinear Motion.3/5 Curvilinear Motion.SECTION B. WORK AND ENERGY.3/6 Work and Kinetic Energy.Definition of Work.Units of Work.Calculation of Work.Examples of Work.Work and Curvilinear Motion.Principle of Work and Kinetic Energy.Advantages of the WorkEnergy Method.Power.Efficiency.3/7 Potential Energy.Gravitational Potential Energy.Elastic Potential Energy.WorkEnergy Equation.Conservative Force Fields.SECTION C. IMPULSE AND MOMENTUM.3/8 Introduction.3/9 Linear Impulse and Linear Momentum.The Linear ImpulseMomentum Principle.Conservation of Linear Momentum.3/10 Angular Impulse and Angular Momentum.Rate of Change of Angular Momentum.The Angular ImpulseMomentum Principle.PlaneMotion Applications.Conservation of Angular Momentum.SECTION D. SPECIAL APPLICATIONS.3/11 Introduction.3/12 Impact.Direct Central Impact.Coefficient of Restitution.Energy Loss During Impact.Oblique Central Impact.3/13 CentralForce Motion.Motion of a Single Body.Conic Sections.Energy Analysis.Summary of Assumptions.Perturbed TwoBody Problem.Restricted TwoBody Problem.3/14 Relative Motion.RelativeMotion Equation.D'Alembert's Principle.ConstantVelocity, Nonrotating Systems.3/15 Chapter Review.
 CHAPTER 4. KINETICS OF SYSTEMS OF PARTICLES.4/1 Introduction.4/2 Generalized Newton's Second Law.4/3 WorkEnergy.WorkEnergy Relation.Kinetic Energy Expression.4/4 ImpulseMomentum.Linear Momentum.Angular Momentum.4/5 Conservation of Energy and Momentum.Conservation of Energy.Conservation of Momentum.4/6 Steady Mass Flow.Analysis of Flow Through a Rigid Container.Incremental Analysis.Angular Momentum in SteadyFlow Systems.4/7 Variable Mass.Equation of Motion.Alternative Approach.Application to Rocket Propulsion.4/8 Chapter Review.PART II. DYNAMICS OF RIGID BODIES.
 CHAPTER 5. PLANE KINEMATICS OF RIGID BODIES.5/1 Introduction.RigidBody Assumption.Plane Motion.5/2 Rotation.AngularMotion Relations.Rotation about a Fixed Axis.5/3 Absolute Motion.5/4 Relative Velocity.Relative Velocity Due to Rotation.Interpretation of the RelativeVelocity Equation.Solution of the RelativeVelocity Equation.5/5 Instantaneous Center of Zero Velocity.Locating the Instantaneous Center.Motion of the Instantaneous Center.5/6 Relative Acceleration.Relative Acceleration Due to Rotation.Interpretation of the RelativeAcceleration Equation.Solution of the RelativeAcceleration Equation.5/7 Motion Relative to Rotating Axes.Time Derivatives of Unit Vectors.Relative Velocity.Transformation of a Time Derivative.Relative Acceleration.Coriolis Acceleration.Rotating versus Nonrotating Systems.5/8 Chapter Review.
 CHAPTER 6. PLANE KINETICS OF RIGID BODIES.6/1 Introduction.Background for the Study of Kinetics.Organization of the Chapter.SECTION A. FORCE, MASS, AND ACCELERATION.6/2 General Equations of Motion.PlaneMotion Equations.Alternative Derivation.Alternative Moment Equations.Unconstrained and Constrained Motion.Systems of Interconnected Bodies.Analysis Procedure.6/3 Translation.6/4 FixedAxis Rotation.6/5 General Plane Motion.Solving PlaneMotion Problems.SECTION B. WORK AND ENERGY.6/6 WorkEnergy Relations.Work of Forces and Couples.Kinetic Energy.Potential Energy and the WorkEnergy Equation.Power.6/7 Acceleration from WorkEnergy Virtual Work.WorkEnergy Equation for Differential Motions.Virtual Work.SECTION C. IMPULSE AND MOMENTUM.6/8 ImpulseMomentum Equations.Linear Momentum.Angular Momentum.Interconnected Rigid Bodies.Conservation of Momentum.Impact of Rigid Bodies.6/9 Chapter Review.
 CHAPTER 7. INTRODUCTION TO THREEDIMENSIONAL DYNAMICS OF RIGID BODIES.7/1 Introduction.SECTION A. KINEMATICS.7/2 Translation.7/3 FixedAxis Rotation.7/4 ParallelPlane Motion.7/5 Rotation about a Fixed Point.Rotation and Proper Vectors.Instantaneous Axis of Rotation.Body and Space Cones.Angular Acceleration.7/6 General Motion.Translating Reference Axes.Rotating Reference Axes.SECTION B. KINETICS.7/7 Angular Momentum.Moments and Products of Inertia.Principal Axes.Transfer Principle for Angular Momentum.7/8 Kinetic Energy.7/9 Momentum and Energy Equations of Motion.Momentum Equations.Energy Equations.7/10 ParallelPlane Motion.7/11 Gyroscopic Motion: Steady Precession.Simplified Approach.More Detailed Analysis.SteadyState Precession.Steady Precession with Zero Moment.7/12 Chapter Review.
 CHAPTER 8. VIBRATION AND TIME RESPONSE.8/1 Introduction.8/2 Free Vibration of Particles.Equation of Motion for Undamped Free Vibration.Solution for Undamped Free Vibration.Graphical Representation of Motion.Equilibrium Position as Reference.Equation of Motion for Damped Free Vibration.Solution for Damped Free Vibration.Categories of Damped Motion.Determination of Damping by Experiment.8/3 Forced Vibration of Particles.Harmonic Excitation.Base Excitation.Undamped Forced Vibration.Damped Forced Vibration.Magnification Factor and Phase Angle.Applications.Electric Circuit Analogy.8/4 Vibration of Rigid Bodies.Rotational Vibration of a Bar.Rotational Counterparts of Translational Vibration.8/5 Energy Methods.Determining the Equation of Motion.Determining the Frequency of Vibration.8/6 Chapter Review.APPENDICES.APPENDIX A . AREA MOMENTS OF INERTIA.APPENDIX B . MASS MOMENTS OF INERTIA.B/1 Mass Moments of Inertia about an Axis.Radius of Gyration.Transfer of Axes.Composite Bodies.B/2 Products of Inertia.Principal Axes of Inertia.APPENDIX C . SELECTED TOPICS OF MATHEMATICS.C/1 Introduction.C/2 Plane Geometry.C/3 Solid Geometry.C/4 Algebra.C/5 Analytic Geometry.C/6 Trigonometry.C/7 Vector Operations.C/8 Series.C/9 Derivatives.C/10 Integrals.C/11 Newton's Method for Solving Intractable Equations.C/12 Selected Techniques for Numerical Integration.APPENDIX D. USEFUL TABLES.Table D/1 Physical Properties.Table D/2 Solar System Constants.Table D/3 Properties of Plane Figures.Table D/4 Properties of Homogeneous Solids.INDEX.
 (source: Nielsen Book Data)
(source: Nielsen Book Data) 9780471787037 20160527
Known for its accuracy, clarity, and applications, Meriam & Kraige's "Engineering Mechanics: Dynamics" has provided a solid foundation of mechanics principles for more than 50 years. Now in its new Sixth Edition, the text continues to help students develop their problemsolving skills with an extensive variety of highly interesting problems related to engineering design. In the new edition, more than 40 per cent of the homework problems are new. There are also new sample problem and more photographs that link theory to application. To help students build necessary visualization and problemsolving skills, the text strongly emphasizes drawing freebody diagrams  the most important skill needed to solve mechanics problems.
(source: Nielsen Book Data) 9780471739319 20160528
 Online
Engineering Library (Terman), SAL3 (offcampus storage)
Engineering Library (Terman)  Status 

Stacks


TA350 .M458 2007 V.1  Unknown 
TA350 .M458 2007 V.2  Unknown 
SAL3 (offcampus storage)  Status 

Stacks

Request 
TA350 .M458 2007 V.1  Available 
TA350 .M458 2007 V.2  Available 
17. Engineering mechanics. Statics & dynamics [2007]
 Hibbeler, R. C.
 11th ed.  Upper Saddle River, N.J. : PrenticeHall, c2007.
 Description
 Book — xvi, 718 p. : col. ill. ; 25 cm.
 Summary

 Statics Edition
 1. General Principles. Mechanics. Fundamental Concepts. Units of Measurement. The International System of Units. Numerical Calculations.
 2. Force Vectors. Scalars and Vectors. Vector Operations. Vector Addition of Forces. Addition of a System of Coplanar Forces. Cartesian Vectors. Addition and Subtraction of Cartesian Vectors. Position Vectors. Force Vector Directed Along a Line. Dot Product.
 3. Equilibrium of a Particle. Condition for the Equilibrium of a Particle. The FreeBody Diagram. Coplanar Force Systems. ThreeDimensional Force Systems.
 4. Force System Resultants. Moment of a ForceScalar Formation. Cross Product. Moment of a ForceVector Formulation. Principle of Moments. Moment of a Force About a Specified Axis. Moment of a Couple. Equivalent System. Resultants of a Force and Couple System. Further Reduction of a Force and Couple System. Reduction of a Simple Distributed Loading.
 5. Equilibrium of a Rigid Body. Conditions for RigidBody Equilibrium. Equilibrium in Two Dimensions. FreeBody Diagrams. Equations of Equilibrium. Two and ThreeForce Members. Equilibrium in Three Dimensions. FreeBody Diagrams. Equations of Equilibrium. Constraints for a Rigid Body.
 6. Structural Analysis. Simple Trusses. The Method of Joints. ZeroForce Members. The Method of Sections. Space Trusses. Frames and Machines.
 7. Internal Forces. Internal Forces Developed in Structural Members. Shear and Moment Equations and Diagrams. Relations Between Distributed Load, Shear, and Moment. Cables.
 8. Friction. Characteristics of Dry Friction. Problems Involving Dry Friction. Wedges. Frictional Forces on Screws. Frictional Forces on Flat Belts. Frictional Forces on Collar Bearings, Pivot Bearings, and Disks. Frictional Forces on Journal Bearings. Rolling Resistance.
 9. Center of Gravity and Centroid. Center of Gravity and Center of Mass for a System of Particles. Center of Gravity, Center of Mass, and Centroid for a Body. Composite Bodies. Theorems of Pappus and Guldinus. Resultant of a General Distributed Force System. Fluid Pressure.
 10. Moments of Inertia. Definitions of Moments of Inertia for Areas. ParallelAxis Theorem for an Area. Radius of Gyration of an Area. Moments of Inertia for an Area by Integration. Moments of Inertia for Composite Areas. Product of Inertia for an Area. Moments of Inertia for an Area About Inclined Axes. Mohr's Circle for Moments of Inertia. Mass Moment of Inertia.
 11. Virtual Work. Definition of Work and Virtual Work. Principle of Virtual Work for a Particle and a Rigid Body. Principle of Virtual Work for a System of Connected Rigid Bodies. Conservative Forces. Potential Energy. Potential Energy Criterion for Equilibrium. Stability of Equilibrium. Appendixes. A. Mathematical Expressions. B. Numerical and Computer Analysis. Answers. Dynamics Edition
 12. Kinematics of a Particle. Introduction. Rectilinear Kinematics: Continuous Motion. Rectilinear Kinematics: Erratic Motion. General Curvilinear Motion. Curvilinear Motion: Rectangular Components. Motion of a Projectile. Curvilinear Motion: Normal and Tangential Components. Curvilinear Motion: Cylindrical Components. Absolute Dependent Motion Analysis of Two Particles. RelativeMotion Analysis of Two Particles Using Translating Axes.
 13. Kinetics of a Particle: Force and Acceleration. Newton's Laws of Motion. The Equation of Motion. Equation of Motion for a System of Particles. Equations of Motion: Rectangular Coordinates. Equations of Motion: Normal and Tangential Coordinates. Equations of Motion: Cylindrical Coordinates. CentralForce Motion and Space Mechanics.
 14. Kinetics of a Particle: Work and Energy. The Work of a Force. Principle of Work and Energy. Principle of Work and Energy for a System of Particles. Power and Efficiency. Conservative Forces and Potential Energy. Conservation of Energy.
 15. Kinetics of a Particle: Impulse and Momentum. Principle of Linear Impulse and Momentum. Principle of Linear Impulse and Momentum for a System of Particles. Conservation of Linear Momentum for a System of Particles. Impact. Angular Momentum. Relation Between Moment of a Force and Angular Momentum. Angular Impulse and Momentum Principles. Steady Fluid Streams. Propulsion with Variable Mass. REVIEW
 1: KINEMATICS AND KINETICS OF A PARTICLE.
 16. Planar Kinematics of a Rigid Body. RigidBody Motion. Translation. Rotation About a Fixed Axis. Absolute General Plane Motion Analysis. RelativeMotion Analysis: Velocity. Instantaneous Center of Zero Velocity. RelativeMotion Analysis: Acceleration. RelativeMotion Analysis Using Rotating Axes.
 17. Planar Kinetics of a Rigid Body: Force and Acceleration. Moment of Inertia. Planar Kinetic Equations of Motion. Equations of Motion: Translation. Equations of Motion: Rotation About a Fixed Axis. Equations of Motion: General Plane Motion.
 18. Planar Kinetics of a Rigid Body: Work and Energy. Kinetic Energy. The Work of a Force. The Work of a Couple. Principle of Work and Energy. Conservation of Energy.
 19. Planar Kinetics of a Rigid Body: Impulse and Momentum. Linear and Angular Momentum. Principle of Impulse and Momentum. Conservation of Momentum. Eccentric Impact.
 REVIEW
 2: PLANAR KINEMATICS AND KINETICS OF A RIGID BODY.
 20. ThreeDimensional Kinematics of a Rigid Body. Rotation About a Fixed Point. The Time Derivative of a Vector Measured from a Fixed and TranslatingRotating System. General Motion. RelativeMotion Analysis Using Translating and Rotating Axes.
 21. ThreeDimensional Kinetics of a Rigid Body. Moments and Products of Inertia. Angular Momentum. Kinetic Energy. Equations of Motion. Gyroscopic Motion. TorqueFree Motion.
 22. Vibrations. Undamped Free Vibration. Energy Methods. Undamped Forced Vibration. Viscous Damped Free Vibration. Viscous Damped Forced Vibration. Electrical Circuit Analogs. Appendixes. A. Mathematical Expressions. B. Numerical and Computer Analysis. C. Vector Analysis. D. Review for the Fundamentals of Engineering Examination. Answers to Selected Problems. Index.
 (source: Nielsen Book Data)
(source: Nielsen Book Data) 9780132215091 20160528
 Online
Engineering Library (Terman)
Engineering Library (Terman)  Status 

Stacks


TA350 .H48 2007  Unknown 
TA350 .H48 2007 SUPPL.1  Unknown 
TA350 .H48 2007 SUPPL.2  Unknown 
 Harper, Brian D.
 Hoboken, NJ : Wiley, c2007.
 Description
 Book — [139] p. : ill. ; 28 cm.
 Online
Engineering Library (Terman)
Engineering Library (Terman)  Status 

Stacks  
TA350 .M458 2007 V.2 SUPPL.1  Unknown 
 8th ed.  Boston : McGrawHill Higher Education, c2007.
 Description
 Book — xxix, 1326 p. : ill. (some col.) ; 26 cm. + 1 CDROM (3 1/4 in.)
 Summary

 1 Introduction
 2 Statics of Particles
 3 Rigid Bodies: Equivalent Systems of Forces
 4 Equilibrium of Rigid Bodies
 5 Distributed Forces: Centroids and Centers of Gravity
 6 Analysis of Structures
 7 Forces in Beams and Cables
 8 Friction
 9 Distributed Forces: Moments of Inertia
 10 Method of Virtual Work
 11 Kinematics of Particles
 12 Kinetics of Particles: Newton's Second Law
 13 Kinetics of Particles: Energy and Momentum Methods
 14 Systems of Particles
 15 Kinematics of Rigid Bodies
 16 Plane Motion of Rigid Bodies: Forces and Accelerations
 17 Plane Motion of Rigid Bodies: Energy and Momentum Methods
 18 Kinetics of Rigid Bodies in Three Dimensions
 19 Mechanical Vibrations Appendix Fundamentals of Engineering Examination.
 (source: Nielsen Book Data)
(source: Nielsen Book Data) 9780073212227 20160528
 Online
Engineering Library (Terman), SAL3 (offcampus storage)
Engineering Library (Terman)  Status 

Stacks


TA350 .B3552 2007  Unknown 
SAL3 (offcampus storage)  Status 

Stacks

Request 
TA350 .B3552 2007  Available 
 Armenàkas, Anthony E., 1924
 Boca Raton, FL : Taylor & Francis/CRC Press, 2006.
 Description
 Book — 975 p. : ill. ; 27 cm.
 Summary

This book presents both differential equation and integral formulations of boundary value problems for computing the stress and displacement fields of solid bodies at two levels of approximation  isotropic linear theory of elasticity as well as theories of mechanics of materials. Moreover, the book applies these formulations to practical solutions in detailed, easytofollow examples. "Advanced Mechanics of Materials and Applied Elasticity" presents modern and classical methods of analysis in current notation and in the context of current practices. The author's wellbalanced choice of topics, clear and direct presentation, and emphasis on the integration of sophisticated mathematics with practical examples offer students in civil, mechanical, and aerospace engineering an unparalleled guide and reference for courses in advanced mechanics of materials, stress analysis, elasticity, and energy methods in structural analysis.
(source: Nielsen Book Data) 9780849398995 20160528
 Online
Engineering Library (Terman)
Engineering Library (Terman)  Status 

Stacks  
TA405 .A697 2006  Unknown 