New York : American Society of Mechanical Engineers, 2009.
Book — vii, 68 p. : ill. ; 28 cm.
This guide describes a complete process for conducting field hardness testing to estimate the yield strength of pipeline steels. The process is non-destructive so it is suitable for in-situ testing on operating pipelines, at pipe storage facilities, or various other locations. It also allows for process variations that are suitable for application in different situations and conditions that may be encountered on a pipeline right-of-way and elsewhere. Field hardness testing is not a 'one size fits all' methodology where a single hardness testing methodology is suitable for application in all situations that can be encountered. (source: Nielsen Book Data)
2nd ed. - New York, N.Y. : American Society of Mechanical Engineers, c2009.
Book — vi, 283 p. : ill. ; 28 cm.
This revised and updated second edition is a complementary reference book to the ASME Steam Properties software, which is also available from ASME. This volume, as well as the software, are based on the IAPWS Industrial Formulation 1997 for the Thermodynamic Properties of Water and Steam (IAPWS-IF97). International standards for water and steam properties are set by the International Association for the Properties of Water and Steam (IAPWS). This book, like the previous "Steam Tables" which date back to 1967, was produced by the efforts of the Properties of Steam Subcommittee of the ASME Research and Technology Committee on Water and Steam in Thermal Systems. It contains chapters on Units and Conversions, Thermodynamic Properties, Transport Properties, and other Properties and Formulations, as well as Appendices on Thermodynamic Property Formulation and Transport Property Formulations. This book also contains 50 tables and charts for quick and easy reference. It contains both SI and US units of measurement. (source: Nielsen Book Data)
New York : American Society of Mechanical Engineers, c2009.
Book — 2 v. : ill. ; 28 cm.
v. 1. Industrial and research HTR projects ; Fuel and fuel cycles ; Nuclear engineering analysis ; Engineering, design and applications
v. 2. Materials and components ; Safety and licensing ; Economics ; Experimental programs and benchmarking ; Industrial process heat applications ; Application to production of hydrogen ; Application to synfuels production (BTL, CTL, KTL) ; Waste management ; Poster presentations.
New York : American Society of Mechanical Engineers, c2009
Book — 2 v. (xxvi, 1457 p.) : ill. ; 28 cm.
Part A. Biomedical. Chemical reactions. Boiling and Condensation. Device/system integration. Digital microfluidics. Electrokinetic flows. Electronics cooling. Micro-flows in fuel cells. Gas flow. General papers. Heat transfer. Interfacial phenomena at micro and nanoscale. Lab-on-chip. Single-phase liquid flow. Microfluidics
Part B. Micro-heat exchangers. Micro jets and micro turbines. Micromixers. Microsensors, miniaturized refrigeration systems. MD simulation of microscale and nanoscale phenomena. Nanofluidics. Novel applications. Optics. Surface tension driven transport processes. Two-phase flow. Poster papers. Keynote papers.
v. 1. Aircraft engine. Ceramics. Coal, biomass and alternative fuels. Controls, diagnostics and instrumentation. Education. Electric power. Awards and honors
v. 2. Combustion, fuels and emissions
v. 3 : pt. A. Heat transfer: general interest
v. 3 : pt. B. Heat transfer: general interest (continued), internal air and seals, combustor heat transfer
v. 4. Cycle innovations. Industrial and cogeneration. Manufacturing materials and metallurgy. Marine
v. 5. Microturbines and small turbomachinery. Oil and gas applications
v. 6 : pt. A. Structures and dynamics: General. Fatigue, fracture and life prediction. Structural mechanics and vibration. Unsteady aerodynamics
v. 6 : pt. B. Rotordynamics and magnetic bearings. Non-Deterministic methods and applications
v. 7 : pt. A. Turbomachinery: Axial flow fan and compressor aerodynamics. Design methods and CFD modeling for turbomachinery. Noise and innovative noise reduction. Component Interactions. General interest.
v. 7: pt. B. Axial flow turbine aerodynamics. Radial turbomachinery aerodynamics. Unsteady flows in turbomachinery.
New York, N.Y. : American Society of Mechanical Engineers, c2008.
Book — 4 v. : ill. ; 28 cm.
v. 1. Plant operations, maintenance, installations and life cycle component reliability and materials issues advanced applications of nuclear technology codes standards licensing and regulatory issues
v. 2. Fuel cycle and high level waste management computational fluid dynamics (CFD) neutronics methods and coupled codes student paper competition
v. 3. Thermal hydraulics instrumentation and controls
v. 4. Structural integrity next generation systems safety and security low level waste management and decommissioning near term deployment: plant designs licensing construction workforce and public acceptance.
New York : American Society of Mechanical Engineers, c2008.
Book — 2 v. (xxxiii, 1948 p.) : ill. ; 28 cm.
pt. A. Single-phase gas flow ; Single-phase liquid flow ; Two-phase flow ; Electrokinetic flows ; Microscale and nanoscale conduction and radiation heat transfer ; Boiling and condensation ; Mass transfer ; Chemical reactions ; MD simulation of microscale and nanoscale phenomena
New York : American Society of Mechanical Engineers, c2007.
Book — xix, 506 p. : ill. ; 28 cm.
Mechanical engineering education: Hands on projects and labs. Innovative approaches to teaching fundamental topics. Innovative curricula. Innovative teaching methods : (teaching with technology, Internet...). Integrative design throughout the curriculum and capstone design products. Integrating research into the curriculum
Mechanical engineering technology department heads.
v. 1. Aircraft engine ; Ceramics ; Coal, biomass and alternative fuels ; Controls, diagnostics and instrumentation ; Marine ; Awards and honors
v. 2. Combustion and fuels ; Electric power
v. 3. Cycle innovations ; Education ; Environmental and regulatory affairs ; industrial and cogeneration ; microturbines and small turbomachinery
v. 4 (in
2 pts.) Heat transfer: General interest ; transition ; internal air and seals ; combustor heat transfer ; Oil and gas applications
v. 5. Manufacturing materials and metallurgy ; Structures and dynamics: General ; structural mechanics and vibration ; unsteady aerodynamics with turbomachinery ; rotordynamics and magnetic bearings ; probabilistic methods and applications
v. 6 (in
2 pts.) Turbomachinery: General interest ; axial flow fan and compressor aerodynamics ; axial flow turbine aerodyamics and heat transfer ; radial turbomachinery aerodynamics ; design methods and CFD modeling for turbomachinery ; noise and innovative noise reduction approaches ; unsteady flows in turbomachinery with structures and dynamics ; component interactions with combustion and fuels.
New York : American Society of Mechanical Engineers, c2005.
Book — 2 v. : ill. ; 28 cm.
pt. A. Keynote papers. Single-phase liquid flow. Single-phase gas flow : experimental/analytical, numerical, molecular simulation. Heat transfer enhancement . Adaibatic two-phase flow. Condensation. Biological systems
pt. B. Boiling. Heat pipes. Electronic cooling. MEMS, systems and devices. Mixing and micro-mixers. Microfluidics and lab-on-a-chip devices. Nanoscale effects and nanoparticles. Heat exchangers : minichannels and microchannels.
New York, NY : ASME Press ; Bury St. Edmunds, Suffolk, UK : Professional Engineering Pub., c2003.
Book — xvii, 412 p.,  p. of plates : ill. (some col.) ; 24 cm.
- Comprehensive and up to date - Heavily illustrated with many color photographs - Includes industry examples of problems encountered with effective solutions - Written with the practitioner in mind. (source: Nielsen Book Data)